I. Clarke

发表

Clinical and hip simulator comparisons of ceramic-on-polyethylene and metal-on-polyethylene wear.

I. Clarke, A. Gustafson, Ian C. Clarke, 2000, Clinical orthopaedics and related research.

Multi-laboratory simulator studies on effects of serum proteins on PTFE cup wear

C. Kaddick, A. Essner, H. Mckellop, 2001 .

Alumina hip joints characterized by run-in wear and steady-state wear to 14 million cycles in hip-simulator model.

I. Clarke, V. Good, H. Oonishi, 2004, Journal of biomedical materials research. Part A.

Effects of A-P translation and rotation on the wear of UHMWPE in a total knee joint simulator.

I. Clarke, V. Good, K. Kawanabe, 2001, Journal of biomedical materials research.

Friction and wear properties of polymer, metal, and ceramic prosthetic joint materials evaluated on a multichannel screening device.

K. Markolf, H. Mckellop, I. Clarke, 1981, Journal of biomedical materials research.

A Review of Lubrication Conditions for Wear Simulation in Artificial Hip Replacements

I. Clarke, S. S. Brown, 2006 .

Total hip articular replacement by internal eccentric shells: the "tharies" approach to total surface replacement arthroplasty.

H. Amstutz, I. Clarke, J. Christie, 1977, Clinical orthopaedics and related research.

Prosthetic hip range of motion and impingement. The effects of head and neck geometry.

I C Clarke, A Sarmiento, I. Clarke, 1982, Clinical orthopaedics and related research.

Porous ingrowth fixation of the femoral component in a canine surface replacement of the hip.

I. Clarke, H. Amstutz, T. Gruen, 1982, Clinical orthopaedics and related research.

Surface damage after multiple dislocations of a 38-mm-diameter, metal-on-metal hip prosthesis.

I. Clarke, J. Bowsher, T. Donaldson, 2008, The Journal of arthroplasty.

Highly Crosslinked Polyethylenes in Hip Replacements: Improved Wear Performance or Paradox?

I. Clarke, H. Oonishi, Kengo Yamamoto, 2007 .

Human articular surface contours and related surface depression frequency studies.

I. Clarke, 1971, Annals of the rheumatic diseases.

Simulator Study of MOM using Steep-cup Flexion - A Clinically Relevant Incorporation of Intermittent Edge-loading

I. Clarke, J. Shelton, J. Bowsher, 2017 .

Third-body Wear Damage Produced in CoCr Surfaces by Hydroxyapatite and Alumina Ceramic Debris: A 10-cycle Metal-on-Metal Simulator Study

I. Clarke, T. Donaldson, T. Halim, 2015 .

Risk of Impingement and Third-body Abrasion With 28-mm Metal-on-metal Bearings

I. Clarke, A. Brusson, J. Lazennec, 2014, Clinical orthopaedics and related research.

How do alternative bearing surfaces influence wear behavior?

I. Clarke, M. Manley, 2008, The Journal of the American Academy of Orthopaedic Surgeons.

Characterization of protein degradation in serum-based lubricants during simulation wear testing of metal-on-metal hip prostheses.

I. Clarke, J. Bowsher, P. Williams, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

Silicon Nitride Bearings for Total Joint Arthroplasty

I. Clarke, R. Lakshminarayanan, G. Pezzotti, 2016 .

Particles released from the Gyro C1E3 during simulated extracorporeal circulation.

I. Clarke, P. Williams, J. Linneweber, 2000, Artificial organs.

In vivo andin vitro comparative studies of animal articular surfaces

H. Amstutz, I. Clarke, D. Schurman, 1975, Annals of Biomedical Engineering.

Co-Cr Head Roughness and its Effect on Wear of UHMWPE and XLPE Cups

I. Clarke, J. Bowsher, T. Donaldson, 2005 .

Wear mode and wear mechanism of retrieved acetabular cups

I. Clarke, K. Kawanabe, J. Tamura, 2003, International Orthopaedics.

Validation of volumetric and linear wear-measurement in UHMWPE cups—a hip simulator analysis

I. Clarke, V. Good, J. Tamura, 2003 .

Friction and Wear Studies of Articular Cartilage: A Scanning Electron Microscope Study

R. M. Kenedi, I. C. Clarke, R. Kenedi, 1975 .

Chemically driven tetragonal-to-monoclinic polymorphic transformation in retrieved ZTA femoral heads from dual mobility hip implants.

I. Clarke, N. Sugano, G. Pezzotti, 2016, Journal of the mechanical behavior of biomedical materials.

Hip-simulator ranking of polyethylene wear: comparisons between ceramic heads of different sizes.

I. Clarke, A. Gustafson, H. Jung, 1996, Acta orthopaedica Scandinavica.

Micro-motion: Consequences of Material Choices, Implant Design and Fit

I. Clarke, 1990 .

Total Hip Prostheses in Standing, Sitting and Squatting Positions: An Overview of Our 8 Years Practice Using the EOS Imaging Technology

I. Clarke, M. Rousseau, A. Brusson, 2015, The open orthopaedics journal.

Surface characteristics of human articular cartilage--a scanning electron microscope study.

I. Clarke, 1971, Journal of anatomy.

Histologic, serologic, and tribologic findings in failed metal-on-metal total hip arthroplasty: AAOS exhibit selection.

I. Clarke, L. Layfield, C. Peters, 2013, The Journal of bone and joint surgery. American volume.

Articular cartilage: a review and scanning electron microscope study. II. The territorial fibrillar architecture.

I. Clarke, 1974, Journal of anatomy.

Correlation of wear debris-induced osteolysis and revision with volumetric wear-rates of polyethylene: A survey of 8 reports in the literature

I. Clarke, P. Herberts, H. Malchau, 2001, Acta orthopaedica Scandinavica.

The design of ceramics for joint replacement

I. Clarke, A. Gustafson, 2008 .

UCLA anatomic total shoulder arthroplasty.

I. Clarke, H. Amstutz*, A. L. Sew Hoy, 1981, Clinical orthopaedics and related research.

The acetabular cement-bone interface in experimental arthroplasties in dogs.

J R Moreland, I C Clarke, I. Clarke, 1981, Clinical orthopaedics and related research.

Quantitative measurement of human articular surface topography in vitro by profile recorder and stereo‐microscopy techniques

I. Clarke, 1973, Journal of microscopy.

Prosthetic Impingement in Total Hip Arthroplasty—The Trigger for Adverse Wear

I. Clarke, J. Lazennec, T. Donaldson, 2020, Open Journal of Orthopedics.

Margin-of-safety Algorithm Used with EOS Imaging to Interpret MHRA Warning for 46-48mm MOM Arthroplasty

Ian C. Clarke, Jean-Yves Lazennec, I. Clarke, 2015 .

Biomechanical Alignment of Main Wear-Pattern on MOM Total Hip Replacement

I. Clarke, T. Donaldson, M. Burgett-Moreno, 2015 .

Stripe wear rates in alumina THR--comparison of microseparation simulator study with retrieved implants.

Kengo Yamamoto, I. Clarke, A. Gustafson, 2004, Journal of biomedical materials research. Part B, Applied biomaterials.

Problems in Gieno-Humeral Surface Replacements—Real or Imagined?

I. Clarke, T. Gruen, S. Maki, 1979 .

Needs of Bioceramics to Longevity of Total Joint Arthroplasty

I. Clarke, V. Good, H. Oonishi, 2002 .

Fabrication and testing of silicon nitride bearings in total hip arthroplasty: winner of the 2007 "HAP" PAUL Award.

I. Clarke, R. Lakshminarayanan, B. Bal, 2009, The Journal of arthroplasty.

Articular cartilage: a review and scanning electron microscope study. 1. The interterritorial fibrillar architecture.

I. Clarke, Ian C. Clarke, 1971, The Journal of bone and joint surgery. British volume.

Preliminary Investigation of Al-Doped Zirconia in Water for THR's

I. Clarke, P. Williams, G. Pezzotti, 2002 .

Y-TZP zirconia run against highly crosslinked UHMWPE tibial inserts: knee simulator wear and phase-transformation studies.

I. Clarke, M. Akagi, G. Pezzotti, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements

A Stark, I C Clarke, V Good, 2000, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Testing of silicon nitride ceramic bearings for total hip arthroplasty.

I. Clarke, R. Lakshminarayanan, B. Bal, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Polyethylene wear debris produced in a knee simulator model: effect of crosslinking and counterface material.

I. Clarke, P. Williams, Cindy M. Brown, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

Wear characteristics of UHMW polyethylene: a method for accurately measuring extremely low wear rates.

I C Clarke, K. Markolf, I. Clarke, 1978, Journal of biomedical materials research.

Mechanism and clinical significance of wear debris-induced osteolysis.

I C Clarke, N Kossovsky, P. Campbell, 1992, Clinical orthopaedics and related research.

The wear pattern in metal-on-metal hip prostheses.

I. Clarke, V. Good, A. Stark, 2001, Journal of biomedical materials research.

A simulator study of adverse wear with metal and cement debris contamination in metal-on-metal hip bearings

I. Clarke, J. Bowsher, T. Donaldson, 2015, Bone & joint research.

Normal and Adverse Wear Patterns Created In-Vivo on Metal-on-Metal Surfaces—A Retrieval Study Representing Four Vendors

Thomas Donaldson, Christopher L. Peters, Edward J. McPherson, 2013 .

Squeaking in a Ceramic on Ceramic Total Hip

I. Clarke, T. Eickmann, G. Gustafson, 2003 .

Squeaking and Neck-Socket Impingement in a Ceramic Total Hip Arthroplasty

I. Clarke, A. Gustafson, T. Eickmann, 2002 .

Metal-on-metal bearing in hip prosthesis generates 100-fold less wear debris than metal-on-polyethylene.

I. Clarke, A. Gustafson, V. Good, 1999, Acta orthopaedica Scandinavica.

Delta Ceramic-on-Alumina Ceramic Articulation in Primary THA: Prospective, Randomized FDA-IDE Study and Retrieval Analysis

Joanne B. Adams, I. Clarke, A. Lombardi, 2010, Clinical orthopaedics and related research.

THARIES surface replacements: a review of the first 100 cases.

I. Clarke, A. Graff-Radford, T. Gruen, 1978, Clinical orthopaedics and related research.

Mid-Term Results of ReCap/Magnum/Taperloc Metal-on-Metal Total Hip Arthroplasty with Mean Follow-Up of 7.1 Years

I. Clarke, A. Kourtis, Antonios A. Koutalos, 2017, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Failure of ceramic THR with liner dislocation – a case report

I. Clarke, Kengo Yamamoto, T. Shishido, 2004, Acta orthopaedica Scandinavica.

MOM Failure Modes: An In-Depth Look at Metal Ions and Implant Wear

I. Clarke, T. Donaldson, E. McPherson, 2014 .

Lesson Learned From Retrieval Analysis Of A Dislocating, Large Diameter MoM Revision THA - A Case Report

Facs Edward McPherson, I. Clarke, T. Donaldson, 2012 .

Comparing ceramic-metal to metal-metal total hip replacements--a simulator study of metal wear and ion release in 32- and 38-mm bearings.

I. Clarke, Kengo Yamamoto, T. Shishido, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Excessive Anteversion Leads to Failure at 3 Years Due to Impingement as Evidenced by Twin Notches in Ti6A4V Stem

I. Clarke, T. Donaldson, M. Burgett-Moreno, 2015 .

What is a "normal" wear pattern for metal-on-metal hip bearings?

I. Clarke, P. Williams, J. Bowsher, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Wear and toughness of crosslinked polyethylene for total knee replacements: A study using a simulator and small‐punch testing

I. Clarke, M. Akagi, C. Hamanishi, 2006, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Study of retrieved acetabular sockets made from high-dose, cross-linked polyethylene.

I. Clarke, H. Oonishi, H. Amino, 2001, The Journal of arthroplasty.

Development of a ceramic surface replacement for the hip. An experimental Sialon model.

I. Clarke, I. Coster, A. Hedley, 1979, Biomaterials, medical devices, and artificial organs.

Improved methods for quantitative radiographic evaluation with particular reference to total-hip arthroplasty.

I. Clarke, T. Gruen, M. Matos, 1976, Clinical orthopaedics and related research.

Ceramic Wear Debris in Total Joint Replacements: Review of Debris Morphology and Biological Response

I. Clarke, P. Williams, 2001 .

Validation of a 3D CT method for measurement of linear wear of acetabular cups

Gerald Q. Maguire, I. Clarke, A. Stark, 2011, Acta orthopaedica.

Strategic Alliance Joint Implant Surgery & Research Foundation is Pleased to Continue a Strategic Alliance with the Donaldson Arthritis Research Foundation

I. Clarke, T. Donaldson, 2019 .

Dose effects of cross-linking polyethylene for total knee arthroplasty on wear performance and mechanical properties.

I. Clarke, M. Akagi, Takashi Nakamura, 2007, Journal of biomedical materials research. Part B, Applied biomaterials.

Microwear phenomena of ultrahigh molecular weight polyethylene cups and debris morphology related to gamma radiation dose in simulator study.

I. Clarke, V. Good, H. Oonishi, 2001, Journal of biomedical materials research.

Wear of Artificial Joint Materials I Friction and Wear Studies: Validity of Wear-Screening Protocols

I. Clarke, 1981 .

Failure Mechanism “Revisited” Total Knee Arthroplasty

I. Clarke, L. Keppler, D. Brazil, 2011 .

Role of ceramic implants. Design and clinical success with total hip prosthetic ceramic-to-ceramic bearings.

I. Clarke, Ian C. Clarke, 1992, Clinical orthopaedics and related research.

Charnley wear model for validation of hip simulators' ball diameter versus polytetrafluoroethylene and polyethylene wear

I C Clarke, V Good, I. Clarke, 1997, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear of sequentially enhanced 9-Mrad polyethylene in 10 million cycle knee simulation study.

I. Clarke, K. Hirakawa, Kengo Yamamoto, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Current concepts of metal-on-metal hip resurfacing.

I. Clarke, Tomoki Takahashi, J. Bowsher, 2005, The Orthopedic clinics of North America.

Acetabular Cups in 60 mm Metal-on-Metal Bearings Subjected to Dynamic Edge-Loading with 70° Peak-Inclination in 10-Million Cycle Simulator Study

Ian C. Clarke, Thomas Halim, Evert J. Smith, 2017 .

Hip-simulator wear studies of an alumina-matrix composite (AMC) ceramic compared to retrieval studies of AMC balls with 1–7 years follow-up

I. Clarke, G. Pezzotti, A. Turnbull, 2009 .

Understanding polyethylene wear mechanisms by modeling of debris size distributions

I. Clarke, P. Williams, 2009 .

Wear Progress and Wear Pattern of Ceramic on Ceramic THA

I. Clarke, T. Shishido, 宏東海林, 2004 .

Profiling the third-body wear damage produced in CoCr surfaces by bone cement, CoCr, and Ti6Al4V debris: A 10-cycle metal-on-metal simulator test

I. Clarke, J. Bowsher, T. Donaldson, 2014, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Validation of acetabular cup wear volume based on direct and two-dimensional measurements: hip simulator analysis

Kengo Yamamoto, Ian C. Clarke, Masao Akagi, 2003, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

Surface micro-analyses of long-term worn retrieved "Osteal" alumina ceramic total hip replacement.

I. Clarke, L. Sedel, G. Pezzotti, 2007, Journal of biomedical materials research. Part B, Applied biomaterials.

Third-body abrasive wear challenge of 32 mm conventional and 44 mm highly crosslinked polyethylene liners in a hip simulator model

I C Clarke, I. Clarke, A. Gustafson, 2009, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Current Status of Zirconia Used in Total Hip Implants

I. Clarke, L. Sedel, N. Sugano, 2003, The Journal of bone and joint surgery. American volume.

Possible triggers for phase transformation in zirconia hip balls.

I. Clarke, S. S. Brown, G. Pezzotti, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Debris-Mediated Osteolysis—A Cascade Phenomenon Involving Motion, Wear, Particulates, Macrophage Induction, and Bone Lysis

P. Campbell, I. Clarke, N. Kossovsky, 1992 .

Ceramic total hip arthroplasty in the United States: safety and risk issues revisited.

I. Clarke, Kengo Yamamoto, T. Shishido, 2008, American journal of orthopedics.

Wear of Artificial Joint Materials IV

I C Clarke, I. Clarke, I C Clarke, 1981 .

Micro-wear features on unique 100-Mrad cupsTwo retrieved cups compared to hip simulator wear study

I. Clarke, H. Oonishi, K. Kawanabe, 2004, Acta orthopaedica Scandinavica.

SEM-Wear Mode and Wear Mechanisms of Retrieved UHMWPE Cup Surface

I. Clarke, T. Masaoka, 宏東海林, 2002 .

Ultrastructural Observation of Wear Mode of Extensively Cross-Linked Polyethylene Cup Surface : In-vitro and retrieved

I. Clarke, V. Good, H. Oonishi, 1999 .

A method for the replication of articular cartilage surfaces suitable for the scanning electron microscope

I. Clarke, 1971, Journal of microscopy.

Assessment of wear in extensively irradiated UHMWPE cups in simulator studies.

I. Clarke, H. Oonishi, Kengo Yamamoto, 2004, Journal of biomedical materials research. Part A.

Metastable Nature of Zirconia Femoral Heads From a 20-Year Perspective Of Clinical and Simulator Wear Studies

I. Clarke, 2006 .

20 Year Experience of Zirconia Total Hip Replacements

I. Clarke, D. Donaldson, D. Green, 2005 .

Zirconia Knee Wear and Raman Spectroscopy Studies Compares 3.5-Mrad and 7-Mrad UHMWPE Inserts

I. Clarke, G. Pezzotti, H. Shoji, 2006 .

Improved wear performance with crosslinked UHMWPE and zirconia implants in knee simulation

I. Clarke, Takashi Nakamura, H. Shoji, 2006, Acta orthopaedica.

Wear Performance of 36mm Biolox® forte/delta Hip Combinations Compared in Simulated ‘Severe’ Micro-Separation Test Mode

Paul A. Williams, Giuseppe Pezzotti, Ian C. Clarke, 2007 .

Wear in molded tibial inserts: knee simulator study of H1900 and GUR1050 polyethylenes.

I. Clarke, K. Hirakawa, Kengo Yamamoto, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Micro-wear patterns on UHMWPE tibial inserts in total knee joint simulation.

Hironobu Oonishi, Masao Akagi, I. Clarke, 2002, Journal of biomedical materials research.

Aggressive 3rd-body wear challenge to highly crosslinked polyethylene: A hip simulator model

I. Clarke, Kengo Yamamoto, T. Donaldson, 2009 .

"Severe" wear challenge to 36 mm mechanically enhanced highly crosslinked polyethylene hip liners.

I. Clarke, P. Williams, J. Bowsher, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

liners in a hip simulator model Third-body abrasive wear challenge of 32 mm conventional and 44 mm highly crosslinked polyethylene

I. Clarke, A. Gustafson, Kengo Yamamoto, 2012 .

Optimal Wear Performance of Ceramic-on-Ceramic Bearings for Total Hip Replacement

I. Clarke, H. Oonishi, 1999 .

Bioceramics : proceedings of the 14th International Symposium on Ceramics in Medicine, the annual meeting of the International Society for Ceramics in Medicine : Bioceramics-14, Palm Springs, California, USA, 14-17th November 2001

Paul A. Williams, Ian C. Clarke, Sharon S. Brown, 2002 .

US perspective on hip simulator wear testing of BIOLOX® delta in’ severe’ test modes

D. Green, I. C. Clarke, Paul A. Williams, 2006 .

Change in UHMWPE properties of retrieved ceramic total knee prosthesis in clinical use for 23 years.

I. Clarke, H. Oonishi, M. Kyomoto, 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

Development of Extremely Low Wear Cross-link Polyethylene for 30 Years

I. Clarke, H. Oonishi, 啓好岩城, 2003 .

Water and bovine serum lubrication compared in simulator PTFE/CoCr wear model.

I. Clarke, V. Good, L. Anissian, 1996, Journal of biomedical materials research.

A Study for a retrieved implant of ceramic-on-ceramic total hip arthroplasty.

Kengo Yamamoto, I. Clarke, Kengo Yamamoto, 2006, The Journal of arthroplasty.

Comparison of the Results of a Simulator Study and Retrieval Implants in Ceramic THA

I. Clarke, Kengo Yamamoto, T. Shishido, 2006 .

Precision and Accuracy in Ceramic-on-Ceramic Wear Analyses: Influence of Simulator Test Duration

I C Clarke, H A Richardson, P Williams, 2005, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Statistical Analysis of Surface and Sub-Surface Residual Stress Fields in Retrieved Alumina Femoral Heads after Long-Term Implantation

I. Clarke, G. Pezzotti, F. Variola, 2006 .

Severe Simulation Test for run-in wear of all-alumina compared to alumina composite THR

I. Clarke, G. Pezzotti, T. Donaldson, 2005 .

SILICON NITRIDE BEARINGS: AN ALTERNATIVE TO OXIDE CERAMICS IN TOTAL HIP ARTHROPLASTY

I. Clarke, G. Pezzotti, T. Donaldson, 2016 .

Wear Debris and Surface Morphology of Extensively Cross-linked Polyethylene

I. Clarke, Kengo Yamamoto, 宏東海林, 2003 .

Characterization of Steady-State Wear in All-Alumina THR to 20 MC

I. Clarke, A. Gustafson, H. Oonishi, 2001 .

Clinical and simulator wear study of alumina ceramic THR to 17 years and beyond.

I. Clarke, M. Boehler, P. Williams, 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

Bioengineering Orientated Studies on the Structure of Human Hip Joint Cartilage

I. Clarke, P. Millington, 1973 .

Discerning alumina ball wear from confounding metal transfer artifact.

I. Clarke, V. Good, K. Kawanabe, 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

Clinical and Tribological Perspectives of Wear in Alumina-Alumina THR

I. Clarke, 2002 .

Clinical and radiographic assessment of a non-constrained total shoulder

I. Clarke, T. Gruen, H. Amstutz*, 2004, International Orthopaedics.

Surface roughness of retrieved femoral heads in CoCr-Polyethylene Hip Bearings – A retrieval assessment with 11-17 years follow-up

I. Clarke, T. Donaldson, W. Wong, 2013 .

Some mechanical and structural characteristics of connective tissue

I. Clarke, J. Evans, 1971 .

Wear of ultra-high molecular weight polyethylene and polytetrafluoroethylene in a hip simulator: A dose-response study of protein concentration

I. Clarke, V. Good, L. Anissian, 2000, Acta orthopaedica Scandinavica.