Yukinori Inoue

发表

FPGA implementation and examination of efficiency in a high-speed PMSM drive system based on direct torque control

Shigeo Morimoto, Masayuki Sanada, Kohei Yasumura, 2017, 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS).

Comparative study of PMSM Drive systems based on current control and direct torque control in flux-weakening control region

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2011, IEMDC 2011.

Discretization error compensation method in high-speed motor drive system by using direct torque control

Shigeo Morimoto, Tetsuya Matsuyama, Yukinori Inoue, 2016 .

A novel method of maximum torque per ampere control for a direct torque-controlled PMSM in a stator flux-linkage synchronous frame

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

Performance improvement of ultra-high-speed PMSM drive system based on DTC by using SiC inverter

Shigeo Morimoto, Masayuki Sanada, Ryo Togashi, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

Sensorless PMSM drive system based on direct torque control in M-T frame synchronized with stator flux-linkage vector

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2011, 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems.

Influence of permanent magnet properties and arrangement on performance of IPMSMs for automotive applications

Shigeo Morimoto, Masayuki Sanada, Yuki Shimizu, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

Calculation reduction method for ultra-high-speed PMSM drive system based on direct torque control in M-T frame

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

Efficiency Improvement and Torque Ripple Reduction by High-Speed PMSM Drive System Implemented in FPGA

Shigeo Morimoto, Masayuki Sanada, Kohei Yasumura, 2019 .

Variable Speed Wind Power Generation System Using Direct Torque Control Suited for Maximum Power Control within Voltage and Current Limitations of Converter

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2009 .

A novel control method in flux-weakening region for efficient operation of interior permanent magnet synchronous motor

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

A Novel Method Of Maximum-power operation for IPMSMs in DTC system

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2009, 2009 13th European Conference on Power Electronics and Applications.

Mathematical model of PMSM and SynRM under maximum torque per ampere condition in a stator flux-linkage synchronous frame

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

Examination and Linearization of Torque Control System for Direct Torque Controlled IPMSM

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2008, 2008 IEEE Industry Applications Society Annual Meeting.

Basic study of variable magnetic flux dual-rotor IPMSM for automotive application

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

Design of Surface Permanent Magnet Synchronous Motor Using Design Assist System for PMSM

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2017 .

Correction of reference flux for MTPA control in direct torque controlled interior permanent magnet synchronous motor drives

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

New Torque Estimation Method Considering Spatial Harmonics and Torque Ripple Reduction in Permanent Magnet Synchronous Motors

Shigeo Morimoto, Kenji Ueyama, Yukinori Inoue, 2010 .

「電気関係学会関西連合大会」;「電気関係学会関西連合大会」;Preface to the Special Issue on ``The 2013 Kansai-section Joint Convention of Institutes of Electrical Engineering''

Yukinori Inoue, 2014 .

Control Scheme for Wide-Speed-Range Operation of Synchronous Reluctance Motor in M-T Frame Synchronized with Stator Flux Linkage

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2013 .

Mechanical sensorless PMSM drive system based on direct torque control in M-T frame synchronized with stator flux-linkage vector

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2015, 2015 IEEE Symposium on Sensorless Control for Electrical Drives (SLED).

Development of high-power PMASynRM using ferrite magnets for reducing rare-earth material use

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

Wide-speed-range operation of PMSM drive system based on direct torque control in M-T frame synchronized with stator flux-linkage vector

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2017, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia).

Maximum Torque Per Ampere Control of a Direct Torque-Controlled PMSM in a Stator Flux Linkage Synchronous Frame

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2016, IEEE Transactions on Industry Applications.

Influence of Structural Differences on Motor Characteristics of Concentrated Winding IPMSMs Obtained by Automatic Design

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2019 .

Reduction of Torque Ripple in Synchronous Reluctance Motor by Combining Different Flux Barrier Structures

Masayuki Sanada, Yukinori Inoue, Shigeo Morimoto, 2019 .

Performance improvement of sensorless IPMSM drives in low-speed region using online parameter identification

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2009 .

Experimental Evaluation of a Rare-Earth-Free PMASynRM With Ferrite Magnets for Automotive Applications

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, IEEE Transactions on Industrial Electronics.

Automatic design of IPMSMs using a GA coupled with the coarse-mesh finite element method

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

Improvement of Torque Response and Examination of Sensorless Drive System Based on Direct Torque Control for IPMSM

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2008 .

Automatic Design of IPMSMs Using a Genetic Algorithm Combined with the Coarse-Mesh FEM for Enlarging the High-Efficiency Operation Area

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2017, IEEE Transactions on Industrial Electronics.

Wide-speed-range operation of DTC-based PMSM drive system using MTPF control

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

Investigation and improvement of torque response of control system based on direct torque control in interior permanent magnet synchronous motors

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2012 .

Comparison of stator flux linkage estimators for PWM-based direct torque controlled PMSM drives

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2015, 2015 IEEE 11th International Conference on Power Electronics and Drive Systems.

Mathematical Model and Control Method of Maximum Torque Per Ampere for PMSM in Stator Flux Linkage Synchronous Frame

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2015 .

Estimated flux compensation for direct torque control in M-T frame synchronized with stator flux-linkage vector

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2013, 2013 IEEE ECCE Asia Downunder.

Discretization Error Compensation Method in High-Speed Motor Drive System by using Direct Torque Control

Shigeo Morimoto, Tetsuya Matsuyama, Yukinori Inoue, 2017 .

最大トルク制御軸での仮想インダクタンスを用いた永久磁石同期モータ用直接トルク制御の広範囲運転制御法;最大トルク制御軸での仮想インダクタンスを用いた永久磁石同期モータ用直接トルク制御の広範囲運転制御法;Wide Speed Operation Method Applying Virtual Inductance on Maximum Torque Control Axis for Direct Torque Control of PMSMs

Shigeo Morimoto, Tetsuya Matsuyama, Yukinori Inoue, 2017 .

Current specifications of vehicle motors

Masayuki Sanada, Yukinori Inoue, Yoshikai Kano, 2013, 2013 IEEE ECCE Asia Downunder.

Control Method Suitable for Direct-Torque-Control-Based Motor Drive System Satisfying Voltage and Current Limitations

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2012 .

Driving Experiment of Sensorless Control System for SynRM at Whole Speed Region

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2019 .

A Reference Value Calculation Scheme for Torque and Flux and an Anti-Windup Implementation of Torque Controller for Direct Torque Control of Permanent Magnet Synchronous Motor

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2010 .

A speed ripple reduction method with inverter angular velocity compensation under pulsatile load torque

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

Investigation and Improvement of Torque Response of Control System Based on Direct Torque Control in Interior Permanent Magnet Synchronous Motors

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2009 .

Mathematical model for high-efficiency control of permanent-magnet synchronous motor in stator flux linkage synchronous frame

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

Control method for direct torque controlled PMSG in wind power generation system

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2009, 2009 IEEE International Electric Machines and Drives Conference.

International Conference Report: 8th Annual IEEE Energy Conversion Congress ＆ Exposition

Yukinori Inoue, 2016 .

Square-wave operation of direct torque controlled PMSM drive system

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2013, 2013 IEEE Energy Conversion Congress and Exposition.

Influence of stator flux estimation on reference flux for MTPA operation in PWM-based DTC PMSM drives

Masayuki Sanada, Yukinori Inoue, Atsushi Shinohara, 2016 .

Examination and Linearization of Torque Control System for Direct Torque Controlled IPMSM

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2010 .

Experimental Evaluation of Current Vector Control Method for High-Speed PMSM Drive Using FPGA

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2019 .

Rotor Structure of Ferrite Magnet Assisted Synchronous Reluctance Motor for Torque Ripple Reduction

Masayuki Sanada, Yukinori Inoue, Shigeo Morimoto, 2014 .

Influence of Carrier Harmonics on Performance of IPMSMs for Automotive Applications

Shigeo Morimoto, Masayuki Sanada, Yuki Shimizu, 2017 .

Efficiency improvement and downsizing of double-layered IPMSMs containing a strong magnet for automotive applications

Shigeo Morimoto, Masayuki Sanada, Yuki Shimizu, 2017, 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe).

A novel control scheme for maximum power operation of synchronous reluctance motors including maximum torque per flux control

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2009 .

Comparative study of control characteristics in ultra-high-speed PMSM drives

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, 2014 IEEE 5th International Symposium on Sensorless Control for Electrical Drives.

Model development for motor drive system simulations

Koichi Shigematsu, Takashi Abe, Toshiji Kato, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

A Reference Flux Calculation Method for MTPA Control in DTC-based IPMSM Drive System

Masayuki Sanada, Yukinori Inoue, Atsushi Shinohara, 2015 .

A novel control scheme for wide speed range operation of direct torque controlled synchronous reluctance motor

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2010, 2010 IEEE Energy Conversion Congress and Exposition.

Improvement of Position Estimation Accuracy in IPMSM Sensorless Drives with On-Line Parameter Identification

Shigeo Morimoto, Koji Yamada, Masayuki Sanada, 2008 .

IPMSM design to improve characteristics under magnet demagnetization

Shigeo Morimoto, Masayuki Sanada, Toshiyuki Endo, 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

Maximum Torque Per Ampere Control in Stator Flux Linkage Synchronous Frame for DTC-Based PMSM Drives Without Using q-Axis Inductance

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2017, IEEE Transactions on Industry Applications.

Structure and Characteristics of High‐Performance PMASynRM with Ferrite Magnets

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014 .

Using Machine Learning to Reduce Design Time for Permanent Magnet Volume Minimization in IPMSMs for Automotive Applications

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2021, IEEJ Journal of Industry Applications.

Influence of ratio of external diameter to stack length on torque and efficiency in outer rotor SPMSMs

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

Investigation of PMASynRM with Dy-Free Bonded Magnets for Traction Applications Considering Irreversible Demagnetization

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2018, 2018 IEEE Energy Conversion Congress and Exposition (ECCE).

Structure and Characteristics of High-Performance PMASynRM with Ferrite Magnets

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2011 .

Rotor structure for reducing demagnetization of magnet in a PMASynRM with ferrite permanent magnet and its characteristics

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2011, 2011 IEEE Energy Conversion Congress and Exposition.

Speed ripple reduction for an interior permanent-magnet synchronous motor based on sensorless voltage-current phase difference control

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2014, 2014 IEEE 5th International Symposium on Sensorless Control for Electrical Drives.

Direct Calculation Method of Reference Flux Linkage for Maximum Torque per Ampere Control in DTC-Based IPMSM Drives

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2017, IEEE Transactions on Power Electronics.

High-performance PMASynRM with ferrite magnet for EV/HEV applications

Masayuki Sanada, Morimoto Shigeo, Yukinori Inoue, 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

Basic study on the suitable structure of a permanent magnet synchronous motor with a powder magnetic core

Shigeo Morimoto, Shizuka Hashimoto, Masayuki Sanada, 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

A reference flux calculation method with stator flux linkage synchronous frame for MTPA control in direct torque controlled PMSM drives

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2015, 2015 18th International Conference on Electrical Machines and Systems (ICEMS).

Improvement of rotor structure on irreversible demagnetization in double-layered IPMSM with Dy-less magnet

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

Maximum torque per ampere control in stator flux linkage synchronous frame for DTC-based PMSM drives without using q-axis inductance

Shigeo Morimoto, Masayuki Sanada, Yukinori Inoue, 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).