H. Cheng

发表

Effect of Surface Roughness on the Point Contact EHL

D. Zhu, H. Cheng, 1988 .

An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication

H. Cheng, Nadir Patir, 1978 .

Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces

H. Cheng, Nadir Patir, 1979 .

Thermal elastohydrodynamic lubrication of spur gears

H. Cheng, K. L. Wang, 1983 .

Stress distributions around furrows and asperities in EHL line contacts

H. Cheng, M. Bali, 1980 .

BWR stability analysis at Brookhaven National Laboratory

H. S. Cheng, A. N. Mallen, Upendra S. Rohatgi, 1991 .

Pressure Perturbation in EHD Contacts Due to an Ellipsoidal Asperity

H. Cheng, L. Chow, 1975 .

Causes of instability at LaSalle and consequences from postulated scram failure

W. Wulff, H. Cheng, A. Mallen, 1990 .

Benchmark Effort on Material Testing of Woven Composites Fabric

H. Cheng, X. Tao, I. Verpoest, 2006 .

Aging effects on the wear behavior of P/M aluminum alloy SiC particle composites

H. Cheng, M. Fine, Y. Pan, 1990 .

List of Theses Topics in Tribology—II

C. N. Rowe, L. P. Ludwig, H. Cheng, 1972 .

Wrinkling behavior of laminated steel sheets

Brad L. Kinsey, Jian Cao, H. Cheng, 2004 .

Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results

James A. Sherwood, Ignace Verpoest, Stepan Vladimirovitch Lomov, 2008 .

Aging effects on the wear behavior of P/M aluminium alloy

H. Cheng, M. Fine, Y. -. Pan, 1990 .

Fatigue crack initiation and fracture in 52100 steel

H. Cheng, M. Fine, H. Hua, 1989 .

A Numerical Solution to the Dynamic Load, Film Thickness, and Surface Temperatures in Spur Gears, Part I: Analysis

K. L. Wang, H. S. Cheng, H. Cheng, 1981 .

The effect of surface roughness on the average film thickness between lubricated rollers

H. Cheng, L. Chow, 1976 .

A co-operative benchmark effort on testing of woven composites

Stepan Vladimirovitch Lomov, Lu Liu, Jian Cao, 2004 .

Stability Analysis of Gas-Lubricated, Self-Acting, Plain, Cylindrical, Journal Bearings of Finite Length, Using Galerkin’s Method

C. H. T. Pan, H. S. Cheng, H. Cheng, 1965 .

Behavior of hydrostatic and hydrodynamic noncontacting face seals.

H. S. Cheng, D. F. Wilcock, C. Y. Chow, 1968 .

The Pressure and Deformation Profiles Between Two Normally Approaching Lubricated Cylinders

H. Cheng, K. Lee, H. S. Cheng, 1973 .

Paper VI (iii) Microscopic Wear Debris Generation and Surface Topography

H. Cheng, J. Xuan, 1992 .

A Refined Solution to the Thermal-Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders

H. Cheng, H. S. Cheng, 1965 .

The Surface Deformation of Aluminum Compressed With Viscous Lubricants

H. Cheng, J. Schey, D. D. Ratnagar, 1974 .

Experimental and analytical tools for evaluation of Stirling engine rod seal behavior

A. I. Krauter, H. S. Cheng, H. Cheng, 1979 .

Elastohydrodynamics and failure prediction

H. Cheng, 1990 .

A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders, Under Heavy Loads

B. Sternlicht, H. Cheng, B. Sternlicht, 1965 .

Micro-elastohydrodynamic Lubrication

H. Cheng, 1984 .

Mechano-chemical model: Reaction temperatures in a concentrated contact

S. M. Hsu, M. Shen, H. Cheng, 1994 .

Evaluation of Tribological Performance of Ceramic Roller Followers

H. Cheng, A. Gangopadhyay, S. Harman, 1990 .

Paper 13: A Correlation between the Theoretical and Experimental Results on the Elastohydrodynamic Lubrication of Rolling and Sliding Contacts

F. K. Orcutt, H. Cheng, H. S. Cheng, 1965 .

A Numerical Solution of the Elastohydrodynamic Film Thickness in an Elliptical Contact

H. Cheng, H. S. Cheng, 1970 .

Rheological effects on friction in elastohydrodynamic lubrication

E. G. Trachman, H. Cheng, 1973 .

The Tribological Design of Machine Elements

H. S. Cheng, H. Cheng, 1989 .

THE PRESSURE AND DEFORMATION PROFILE BETWEEN TWO COLLIDING LUBRICATED CYLINDERS

H. Cheng, K. Lee, 1971 .