S. Bose

发表

Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants.

A. Bandyopadhyay, Félix A. España, V. Balla, 2010, Acta biomaterialia.

Effects of pore distribution and chemistry on physical, mechanical, and biological properties of tricalcium phosphate scaffolds by binder-jet 3D printing

S. Bose, Dongxu Ke, 2018, Additive Manufacturing.

Additive manufacturing: scientific and technological challenges, market uptake and opportunities

A. Bandyopadhyay, S. Bose, S. Tofail, 2017 .

Characterization and modeling of a piezoelectric micromachined ultrasonic transducer with a very large length/width aspect ratio

Hongsoo Choi, Amit Bandyopadhyay, Susmita Bose, 2008 .

Development of piezoelectric micromachined ultrasonic transducers

Firas Akasheh, Amit Bandyopadhyay, Susmita Bose, 2004 .

Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2008, Acta biomaterialia.

First Demonstration on Direct Laser Fabrication of Lunar Regolith Parts

A. Bandyopadhyay, V. Balla, S. Bose, 2012 .

Bone tissue engineering using 3D printing

A. Bandyopadhyay, S. Bose, Sahar Vahabzadeh, 2013 .

Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping

A. Bandyopadhyay, V. Balla, S. Bose, 2008 .

SrO- and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: mechanical properties and in vivo osteogenesis in a rabbit model.

A. Bandyopadhyay, S. Bose, S. Tarafder, 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

Starch-Hydroxyapatite Composite Bone Scaffold Fabrication Utilizing a Slurry Extrusion-Based Solid Freeform Fabricator.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2018, Additive manufacturing.

Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: a review.

S. Bose, S. Tarafder, 2012, Acta biomaterialia.

Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2003 .

Antimicrobial Particulate Silver Coatings on Stainless Steel Implants for Fracture Management.

A. Bandyopadhyay, S. Bose, H. Beyenal, 2012, Materials science & engineering. C, Materials for biological applications.

Aluminum-doped TiO2 nano-powders for gas sensors

Sheikh A. Akbar, Young Jin Choi, Amit Bandyopadhyay, 2007 .

Additive manufacturing of natural biopolymers and composites for bone tissue engineering

Ashley A. Vu, S. Bose, C. Koski, 2020 .

Rotating bending fatigue response of laser processed porous NiTi alloy

A. Bandyopadhyay, V. Balla, S. Bose, 2011 .

Functionally graded Co-Cr-Mo coating on Ti-6Al-4V alloy structures.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2008, Acta biomaterialia.

Fabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping (LENS).

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2009, Acta biomaterialia.

Damage Evaluation of TiO2 Nanotubes on Titanium

A. Bandyopadhyay, S. Bose, A. Shivaram, 2015 .

Wear Performance of Laser Processed Tantalum Coatings.

A. Bandyopadhyay, V. Balla, S. Bose, 2011, Materials science & engineering. C, Materials for biological applications.

Bone cell-materials interactions and Ni ion release of anodized equiatomic NiTi alloy.

A. Bandyopadhyay, V. Balla, S. Bose, 2011, Acta biomaterialia.

Enhanced osteogenic protein expression on human osteoblast-osteoclast co-culture system using doped hydroxyapatite plasma coatings for orthopedic and dental applications

S. Bose, Dongxu Ke, Sahar Vahabzadeh, 2019 .

Phase stability and biological property evaluation of plasma sprayed hydroxyapatite coatings for orthopedic and dental applications.

A. Bandyopadhyay, S. Bose, M. Roy, 2015, Acta biomaterialia.

Preparation and cell–materials interactions of plasma sprayed strontium-containing hydroxyapatite coating

A. Bandyopadhyay, S. Bose, K. Luk, 2007 .

Induction Plasma Sprayed Nano Hydroxyapatite Coatings on Titanium for Orthopaedic and Dental Implants.

A. Bandyopadhyay, S. Bose, M. Roy, 2011, Surface & coatings technology.

Compositionally graded hydroxyapatite/tricalcium phosphate coating on Ti by laser and induction plasma.

A. Bandyopadhyay, V. Balla, S. Bose, 2011, Acta biomaterialia.

Antibacterial and biological characteristics of silver containing and strontium doped plasma sprayed hydroxyapatite coatings.

A. Bandyopadhyay, S. Bose, M. Roy, 2012, Acta biomaterialia.

From CT Scan to Ceramic Bone Graft

A. Bandyopadhyay, S. Bose, J. Darsell, 2003 .

Understanding compressive deformation in porous titanium

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2010 .

In Vivo Response of Laser Processed Porous Titanium Implants for Load-Bearing Implants

A. Bandyopadhyay, S. Bose, S. Tarafder, 2016, Annals of Biomedical Engineering.

Effects of amylose content on the mechanical properties of starch-hydroxyapatite 3D printed bone scaffolds

S. Bose, C. Koski, 2019 .

Influence of processing parameters on PZT thick films

A. Bandyopadhyay, S. Bose, O. Huang, 2005 .

3D Printing for Bone Regeneration

Susmita Bose, Amit Bandyopadhyay, Indranath Mitra, 2020, Current Osteoporosis Reports.

Tricalcium phosphate and tricalcium phosphate/polycaprolactone particulate composite for controlled release of protein.

S. Bose, Sahar Vahabzadeh, Joe Edgington, 2013, Materials science & engineering. C, Materials for biological applications.

Comparative effects of controlled release of sodium bicarbonate and doxorubicin on osteoblast and osteosarcoma cell viability.

S. Bose, Dishary Banerjee, 2019, Materials today. Chemistry.

Effects of polymer chemistry, concentration, and pH on doxorubicin release kinetics from hydroxyapatite-PCL-PLGA composite

S. Bose, Dishary Banerjee, 2019, Journal of Materials Research.

In vitro biological and tribological properties of transparent magnesium aluminate (Spinel) and aluminum oxynitride (ALON®)

A. Bandyopadhyay, V. Balla, S. Bose, 2011, Journal of materials science. Materials in medicine.

Effect of ZnO Doping in PZT Nanopowders

A. Bandyopadhyay, S. Bose, A. Banerjee, 2012 .

Influence of La2O3, SrO, and ZnO Addition on PZT

A. Bandyopadhyay, S. Bose, A. Banerjee, 2006 .

Metal Additive Manufacturing for Load-Bearing Implants

A. Bandyopadhyay, S. Bose, Sushant Ciliveri, 2022, Journal of the Indian Institute of Science.

Effects of Silicon on Osteoclast Cell Mediated Degradation, In Vivo Osteogenesis and Vasculogenesis of Brushite Cement.

S. Bose, M. Roy, Sahar Vahabzadeh, 2015, Journal of materials chemistry. B.

Plasma sprayed fluoride and zinc doped hydroxyapatite coated titanium for load-bearing implants.

A. Bandyopadhyay, S. Bose, Arjak Bhattacharjee, 2022, Surface & coatings technology.

Effects of polycaprolactone on alendronate drug release from Mg-doped hydroxyapatite coating on titanium.

Ashley A. Vu, A. Bandyopadhyay, S. Bose, 2018, Materials science & engineering. C, Materials for biological applications.

Bone cell–material interactions on metal-ion doped polarized hydroxyapatite

A. Bandyopadhyay, S. Bose, S. Bodhak, 2011 .

Electrically polarized TiO2 nanotubes on Ti implants to enhance early-stage osseointegration.

A. Bandyopadhyay, S. Bose, A. Shivaram, 2019, Acta biomaterialia.

Densification Study and Mechanical Properties of Microwave‐Sintered Mullite and Mullite–Zirconia Composites

A. Bandyopadhyay, S. Bose, S. Bodhak, 2011 .

Metal Additive Manufacturing for Load-Bearing Implants

A. Bandyopadhyay, S. Bose, Sushant Ciliveri, 2022, Journal of the Indian Institute of Science.

Comparison of Tantalum and Hydroxyapatite Coatings on Titanium for Applications in Load Bearing Implants

A. Bandyopadhyay, V. Balla, S. Bose, 2010 .

Surface coatings for improvement of bone cell materials and antimicrobial activities of Ti implants.

A. Bandyopadhyay, S. Bose, B. Gibbins, 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

Biocompatibility and In Situ Growth of TiO2 Nanotubes on Ti Using Different Electrolyte Chemistry

A. Bandyopadhyay, S. Bose, K. Das, 2008 .

Zinc curcumin complex on fluoride doped hydroxyapatite with enhanced biological properties for dental and orthopedic applications

S. Bose, Arjak Bhattacharjee, Arjak Bhattacharjee, 2022, Journal of Materials Research.

Controlled delivery of curcumin and vitamin K2 from HA-coated Ti implant for enhanced in vitro chemoprevention, osteogenesis and in vivo osseointegration.

S. Bose, Naboneeta Sarkar, 2020, ACS applied materials & interfaces.

Natural Antibiotic Oregano in Hydroxyapatite-Coated Titanium Reduces Osteoclastic Bone Resorption for Orthopedic and Dental Applications.

Ashley A. Vu, S. Bose, 2020, ACS applied materials & interfaces.

Development of Porous Polymer-Ceramic Composites as Bone Grafts

A. Bandyopadhyay, S. Bose, S. Kalita, 2002 .

Additive Manufacturing of Ceramics

A. Bandyopadhyay, S. Bose, Dongxu Ke, 2015, Additive Manufacturing.

Mesoporous calcium silicate for controlled release of bovine serum albumin protein.

A. Bandyopadhyay, S. Bose, Weichang Xue, 2009, Acta biomaterialia.

pH Tunable Fluorescent Calcium Phosphate Nanocomposite for Sensing and Controlled Drug Delivery

S. Bose, S. Banerjee, M. Roy, 2011 .

IGF-loaded silicon and zinc doped brushite cement: physico-mechanical characterization and in vivo osteogenesis evaluation.

A. Bandyopadhyay, S. Bose, Sahar Vahabzadeh, 2015, Integrative biology : quantitative biosciences from nano to macro.

In Vitro Characterizations of Si4+ and Zn2+ Doped Plasma Sprayed Hydroxyapatite Coatings Using Osteoblast and Osteoclast Coculture.

S. Bose, Dongxu Ke, Dishary Banerjee, 2019, ACS biomaterials science & engineering.

Effects of Zinc and Strontium Substitution in Tricalcium Phosphate on Osteoclast Differentiation and Resorption.

A. Bandyopadhyay, S. Bose, M. Roy, 2013, Biomaterials science.

Osteoclastogenesis and osteoclastic resorption of tricalcium phosphate: effect of strontium and magnesium doping.

S. Bose, M. Roy, 2012, Journal of biomedical materials research. Part A.

Biphasic Resorbable Calcium Phosphate Ceramic for Bone Implants and Local Alendronate Delivery

A. Bandyopadhyay, S. Bose, S. Banerjee, 2010 .

Role of porosity defects in metal 3D printing: Formation mechanisms, impacts on properties and mitigation strategies

A. Bandyopadhyay, S. Bose, Peihua Xu, 2022, Materials Today.

MWCNT REINFORCED METAL MATRIX COMPOSITES USING LENS

A. Bandyopadhyay, V. Balla, S. Bose, 2010 .

Synthesis of Nb and La Doped TiO2 for Gas Sensors

A. Bandyopadhyay, S. Bose, A. Banerjee, 2012 .

Nanocrystalline hydroxyapatite: micelle templated synthesis and characterization.

S. Bose, Yujie Wu, 2005, Langmuir : the ACS journal of surfaces and colloids.

Bone cell–materials interaction on alumina ceramics with different grain sizes

A. Bandyopadhyay, S. Bose, A. Chanda, 2009 .

Beta-phase stabilization and increased osteogenic differentiation of stem cells by solid-state synthesized magnesium tricalcium phosphate

S. Bose, Sahar Vahabzadeh, Samuel F Robertson, 2021, Journal of Materials Research.

Development of diabetic muffin enriched with flaxseed and its chemical and microbial analyses

S. Bose, Shweta Singh, 2016 .

Laser processed calcium phosphate reinforced CoCrMo for load-bearing applications: Processing and wear induced damage evaluation.

A. Bandyopadhyay, S. Bose, H. Sahasrabudhe, 2018, Acta biomaterialia.

Additively Manufactured Ti6Al4V-Si-Hydroxyapatite composites for articulating surfaces of load-bearing implants.

Jose D. Avila, A. Bandyopadhyay, S. Bose, 2020, Additive manufacturing.

Effect of electrical polarization and composition of biphasic calcium phosphates on early stage osteoblast interactions.

A. Bandyopadhyay, S. Bose, S. Bodhak, 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

Effects of Iron on Physical and Mechanical Properties, and Osteoblast Cell Interaction in β-Tricalcium Phosphate

S. Bose, Sahar Vahabzadeh, 2017, Annals of Biomedical Engineering.

Effects of Aloe Vera Gel Extract in Doped Hydroxyapatite-Coated Titanium Implants on in Vivo and in Vitro Biological Properties.

S. Bose, Dishary Banerjee, 2019, ACS applied bio materials.

Drug Delivery From Surface Modified Titanium Alloy for Load‐Bearing Implants

A. Bandyopadhyay, S. Bose, S. Tarafder, 2015 .

In vivo biocompatibility of SrO and MgO doped brushite cements

A. Bandyopadhyay, S. Bose, M. Roy, 2022, Journal of biomedical materials research. Part B, Applied biomaterials.

MgO-doped tantalum coating on Ti: microstructural study and biocompatibility evaluation.

A. Bandyopadhyay, V. Balla, S. Bose, 2012, ACS applied materials & interfaces.

Direct laser processing of bulk lead zirconate titanate ceramics

A. Bandyopadhyay, V. Balla, S. Bose, 2010 .

Improving Biocompatibility for Next Generation of Metallic Implants.

A. Bandyopadhyay, S. Bose, S. Goodman, 2022, Progress in materials science.

Effect of grain size on mechanical, surface and biological properties of microwave sintered hydroxyapatite.

A. Bandyopadhyay, S. Bose, S. Dasgupta, 2013, Materials science & engineering. C, Materials for biological applications.

Synthesis, Processing, Mechanical, and Biological Property Characterization of Hydroxyapatite Whisker-Reinforced Hydroxyapatite Composites

A. Bandyopadhyay, S. Bose, S. Dasgupta, 2009 .

Electrically polarized HAp-coated Ti: in vitro bone cell-material interactions.

A. Bandyopadhyay, S. Bose, S. Bodhak, 2010, Acta biomaterialia.

Synthesis, Mechanical and Bone Cell Materials Interaction Studies on SrO and MgO Doped Resorbable Tricalcium Phosphate for Bone Tissue Engineering

A. Bandyopadhyay, S. Bose, S. Banerjee, 2012 .

Allicin-Loaded Hydroxyapatite: Enhanced Release, Cytocompatibility, and Antibacterial Properties for Bone Tissue Engineering Applications

S. Bose, Arjak Bhattacharjee, Dishary Banerjee, 2022, JOM.

Biointegration of three-dimensional–printed biomaterials and biomedical devices

A. Bandyopadhyay, V. Balla, S. Bose, 2020 .

Laser Processed Tantalum for Implants

A. Bandyopadhyay, V. Balla, S. Bose, 2012 .

Recent advances in bone tissue engineering scaffolds.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2012, Trends in biotechnology.

Hydroxyapatite reinforced Ti6Al4V composites for load-bearing implants.

Jose D. Avila, A. Bandyopadhyay, S. Bose, 2021, Acta biomaterialia.

Chapter 17 – Laser-Based Additive Manufacturing Processes

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2018 .

Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties.

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2010, Acta biomaterialia.

Direct laser processing of a tantalum coating on titanium for bone replacement structures.

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2010, Acta biomaterialia.

Mechanical, in vitro antimicrobial, and biological properties of plasma-sprayed silver-doped hydroxyapatite coating.

A. Bandyopadhyay, S. Bose, H. Beyenal, 2012, ACS applied materials & interfaces.

Ceramics in Bone Grafts and Coated Implants

A. Bandyopadhyay, S. Bose, M. Roy, 2017 .

Hydroxyapatite coatings for metallic implants

A. Bandyopadhyay, S. Bose, S. Tarafder, 2015 .

Polycaprolactone-Coated 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering: In Vitro Alendronate Release Behavior and Local Delivery Effect on In Vivo Osteogenesis

Susmita Bose, S. Bose, S. Tarafder, 2014, ACS applied materials & interfaces.

Silver nanoparticle deposited implants to treat osteomyelitis.

A. Bandyopadhyay, S. Bose, S. Nandi, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Lithium-doped β-tricalcium phosphate: Effects on physical, mechanical and in vitro osteoblast cell-material interactions.

S. Bose, Sahar Vahabzadeh, Vaughn Kohsei Hack, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

Nanoscale Hydroxyapatite Coatings on Ti: Simultaneous Enhancement of Mechanical and Biological Properties

A. Bandyopadhyay, S. Bose, M. Roy, 2011 .

Nanocrystalline α-Al2O3 Using Sucrose

A. Bandyopadhyay, S. Bose, R. Das, 2004 .

Effect of Zn, Sr, and Y Addition on Electrical Properties of PZT Thin Films

Amit Bandyopadhyay, Susmita Bose, Abhishek Dalakoti, 2006 .

Laser-based directed energy deposition (DED-LB) of advanced materials

J. Schoenung, A. Bandyopadhyay, S. Bose, 2022, Materials Science and Engineering: A.

Characterization of biomaterials

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2013 .

Osteoprecursor cell response to strontium-containing hydroxyapatite ceramics.

A. Bandyopadhyay, S. Bose, W. Lu, 2006, Journal of biomedical materials research. Part A.

Enhanced In Vivo Bone and Blood Vessel Formation by Iron Oxide and Silica Doped 3D Printed Tricalcium Phosphate Scaffolds

Susmita Bose, Dishary Banerjee, S. Bose, 2018, Annals of Biomedical Engineering.

Resorbable Tricalcium Phosphates for Bone Tissue Engineering: Influence of SrO Doping

A. Bandyopadhyay, S. Bose, S. Banerjee, 2012 .

Understanding the Influence of SrO Doping on the Mechanical Properties of β‐TCP Ceramics

A. Bandyopadhyay, S. Bose, K. Devoe, 2011 .

3D printing of biomaterials

Suman Das, Amit Bandyopadhyay, Susmita Bose, 2015 .

Understanding of dopant-induced osteogenesis and angiogenesis in calcium phosphate ceramics.

A. Bandyopadhyay, S. Bose, S. Tarafder, 2013, Trends in biotechnology.

Calcium Phosphate‐Based Resorbable Ceramics: Influence of MgO, ZnO, and SiO2 Dopants

A. Bandyopadhyay, S. Bose, S. Bernard, 2006 .

Mechanical property and in vitro biocompatibility of brushite cement modified by polyethylene glycol

A. Bandyopadhyay, S. Bose, M. Roy, 2012 .

Influence of Tantalum and Tungsten Doping on Polarizability and Bioactivity of Hydroxyapatite Ceramics

A. Bandyopadhyay, S. Bose, J. Dhal, 2013 .

SiO2 and SrO Doped β‐TCP: Influence of Dopants on Mechanical and Biological Properties

A. Bandyopadhyay, S. Bose, Gary A. Fielding, 2012 .

ZnO, SiO2, and SrO doping in resorbable tricalcium phosphates: Influence on strength degradation, mechanical properties, and in vitro bone-cell material interactions.

A. Bandyopadhyay, S. Bose, S. Banerjee, 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

Understanding bioactivity and polarizability of hydroxyapatite doped with tungsten.

A. Bandyopadhyay, S. Bose, Gary A. Fielding, 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

Understanding in vivo response and mechanical property variation in MgO, SrO and SiO₂ doped β-TCP.

A. Bandyopadhyay, S. Bose, N. Davies, 2011, Bone.

Influence of MgO, SrO, and ZnO Dopants on Electro-Thermal Polarization Behavior and In Vitro Biological Properties of Hydroxyapatite Ceramics

A. Bandyopadhyay, S. Bose, S. Bodhak, 2011 .

Spherical and Anisotropic Hydroxyapatite Nanocrystals

A. Bandyopadhyay, S. Bose, Weichang Xue, 2010 .

Understanding the influence of MgO and SrO binary doping on the mechanical and biological properties of beta-TCP ceramics.

A. Bandyopadhyay, S. Bose, N. Davies, 2010, Acta biomaterialia.

Double Emulsion Droplets as Microreactors for Synthesis of Mesoporous Hydroxyapatite

David A. Weitz, Ho Cheung Shum, Amit Bandyopadhyay, 2009 .

Synthesis of Hydroxyapatite Nanopowders via Sucrose‐Templated Sol–Gel Method

S. Bose, S. Saha, 2003 .

Natural Medicine Delivery from Biomedical Devices for the Treatment of Bone Disorders: A Review.

S. Bose, Dishary Banerjee, Naboneeta Sarkar, 2021, Acta biomaterialia.

Controlled Delivery of Natural Medicinal Compounds from Tissue Engineering Scaffolds for Critical-Sized Bone Defect Repair

S. Bose, Dishary Banerjee, Naboneeta Sarkar, 2020 .

Effects of MgO and SiO2 on Plasma-Sprayed Hydroxyapatite Coating: An in Vivo Study in Rat Distal Femoral Defects.

A. Bandyopadhyay, S. Bose, Dongxu Ke, 2017, ACS applied materials & interfaces.

Role of surface charge and wettability on early stage mineralization and bone cell-materials interactions of polarized hydroxyapatite.

A. Bandyopadhyay, S. Bose, S. Bodhak, 2009, Acta biomaterialia.

Hydroxyapatite nanopowders: Synthesis, densification and cell–materials interaction

A. Bandyopadhyay, S. Bose, A. Banerjee, 2007 .

CaO--P2O5--Na2O-based sintering additives for hydroxyapatite (HAp) ceramics.

A. Bandyopadhyay, S. Bose, S. Kalita, 2004, Biomaterials.

Processing of alumina and zirconia nano-powders and compacts

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2004 .

Synthesis of Al2O3–CeO2 Mixed Oxide Nano-Powders

S. Bose, Yujie Wu, 2005 .

Porous calcium aluminate ceramics for bone-graft applications

A. Bandyopadhyay, S. Bose, S. Kalita, 2002 .

Novel Synthesis Route to Make Nanocrystalline Lead Zirconate Titanate Powder

S. Bose, A. Banerjee, 2004 .

Porous Mullite Preforms via Fused Deposition

A. Bandyopadhyay, S. Bose, Raj Atisivan, 2001 .

Processing and characterization of porous alumina scaffolds

Amit Bandyopadhyay, Susmita Bose, D. Sarkar, 2002, Journal of materials science. Materials in medicine.

Influence of crystallinity on CO gas sensing for TiO2 films

A. Bandyopadhyay, S. Bose, Z. Seeley, 2009 .

Titania nanotube interface to increase adhesion strength of hydroxyapatite sol-gel coatings on Ti-6Al-4V for orthopedic applications

A. Bandyopadhyay, S. Bose, Samuel F Robertson, 2019, Surface and Coatings Technology.

Citrate–nitrate synthesis of nano-structured titanium dioxide ceramics for gas sensors

S. Bose, Z. Seeley, Young-Jin Choi, 2009 .

Additive manufacturing of biomaterials.

Dongxu Ke, Amit Bandyopadhyay, Susmita Bose, 2018, Progress in materials science.

Synthesis and characterization of tricalcium phosphate with Zn and Mg based dopants

A. Bandyopadhyay, S. Bose, Weichang Xue, 2008, Journal of materials science. Materials in medicine.

Enhanced In Vivo Bone and Blood Vessel Formation by Iron Oxide and Silica Doped 3D Printed Tricalcium Phosphate Scaffolds

S. Bose, Sahar Vahabzadeh, Dishary Banerjee, 2018, Annals of Biomedical Engineering.

Tricalcium phosphate based resorbable ceramics: Influence of NaF and CaO addition

A. Bandyopadhyay, S. Bose, Z. Seeley, 2008 .

Influence of ZnO doping in calcium phosphate ceramics

A. Bandyopadhyay, S. Bose, E. Withey, 2007 .

Effects of MgO, ZnO, SrO, and SiO2 in tricalcium phosphate scaffolds on in vitro gene expression and in vivo osteogenesis.

S. Bose, Dongxu Ke, Sahar Vahabzadeh, 2019, Materials science & engineering. C, Materials for biological applications.

Zn- and Mg-doped hydroxyapatite nanoparticles for controlled release of protein.

A. Bandyopadhyay, S. Bose, S. Dasgupta, 2010, Langmuir : the ACS journal of surfaces and colloids.

Influence of TiO2 and Ag2O addition on tricalcium phosphate ceramics.

A. Bandyopadhyay, S. Bose, Z. Seeley, 2007, Journal of biomedical materials research. Part A.

In vitro antimicrobial and biological properties of laser assisted tricalcium phosphate coating on titanium for load bearing implant

A. Bandyopadhyay, S. Bose, M. Roy, 2009 .

In vitro antimicrobial and biological properties of laser assisted tricalcium phosphate coating.

A. Bandyopadhyay, S. Bose, M. Roy, 2009, Materials science & engineering. C, Materials for biological applications.

Effects of surface area and topography on 3D printed tricalcium phosphate scaffolds for bone grafting applications.

Ashley A. Vu, A. Bandyopadhyay, S. Bose, 2021, Additive manufacturing.

Microwave‐sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2013, Journal of tissue engineering and regenerative medicine.

Trace element doping in calcium phosphate ceramics to Understand osteogenesis and angiogenesis

A. Bandyopadhyay, S. Bose, S. Tarafder, 2013 .

Electrically polarized biphasic calcium phosphates: adsorption and release of bovine serum albumin.

A. Bandyopadhyay, S. Bose, S. Banerjee, 2010, Langmuir : the ACS journal of surfaces and colloids.

Effects of SiO2, SrO, MgO, and ZnO dopants in tricalcium phosphates on osteoblastic Runx2 expression.

S. Bose, Gary A. Fielding, William R Smoot, 2014, Journal of biomedical materials research. Part A.

Reverse micelle-mediated synthesis of calcium phosphate nanocarriers for controlled release of bovine serum albumin.

A. Bandyopadhyay, S. Bose, S. Dasgupta, 2009, Acta biomaterialia.

Compositionally graded doped hydroxyapatite coating on titanium using laser and plasma spray deposition for bone implants.

Ashley A. Vu, A. Bandyopadhyay, S. Bose, 2019, Acta biomaterialia.

3D printed tricalcium phosphate bone tissue engineering scaffolds: effect of SrO and MgO doping on in vivo osteogenesis in a rat distal femoral defect model

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2013 .

3D printed hydroxyapatite-nacre-starch based bone grafts: Evaluation of biological and mechanical properties

S. Bose, C. Koski, Arjak Bhattacharjee, 2022, Journal of Materials Research.

Ginger and Garlic Extracts Enhance Osteogenesis in 3D Printed Calcium Phosphate Bone Scaffolds with Bimodal Pore Distribution.

Ashley A. Vu, S. Bose, Dishary Banerjee, 2022, ACS applied materials & interfaces.

Influence of random and designed porosities on 3D printed tricalcium phosphate-bioactive glass scaffolds.

A. Bandyopadhyay, S. Bose, A. Boccaccini, 2021, Additive manufacturing.

Effects of chitosan-loaded hydroxyapatite on osteoblasts and osteosarcoma for chemopreventative applications.

Ashley A. Vu, S. Bose, C. Koski, 2020, Materials science & engineering. C, Materials for biological applications.

Lovastatin release from polycaprolactone coated β-tricalcium phosphate: effects of pH, concentration and drug-polymer interactions.

S. Bose, S. Tarafder, Kelly Nansen, 2013, Materials science & engineering. C, Materials for biological applications.

Glutamic Acid‐Biphasic Calcium Phosphates: In Vitro Bone Cell‐Material Interactions

S. Bose, S. Tarafder, Ian C. McLean, 2012 .

Electro-thermal Polarisation of Hydroxyapatite Ceramics and Coatings for Bone Tissue Engineering Applications

A. Bandyopadhyay, S. Bose, S. Bodhak, 2016 .

Influence of pentavalent dopant addition to polarization and bioactivity of hydroxyapatite.

A. Bandyopadhyay, S. Bose, J. Dhal, 2013, Materials science & engineering. C, Materials for biological applications.

Electro Thermally Polarized Sintered Bulk‐HAP and HAP‐Coated Ti for Biomedical Applications

A. Bandyopadhyay, S. Bose, S. Bodhak, 2012 .

Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium

Sandip Bysakh, Vamsi Krishna Balla, Debabrata Basu, 2011 .

Microwave-processed nanocrystalline hydroxyapatite: simultaneous enhancement of mechanical and biological properties.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2010, Acta biomaterialia.

Induction plasma sprayed Sr and Mg doped nano hydroxyapatite coatings on Ti for bone implant.

A. Bandyopadhyay, S. Bose, M. Roy, 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

Regulation of Osteogenic Markers at Late Stage of Osteoblast Differentiation in Silicon and Zinc Doped Porous TCP

S. Bose, Sahar Vahabzadeh, Gary A. Fielding, 2019, Journal of functional biomaterials.

Calcium phosphate ceramics in drug delivery

A. Bandyopadhyay, S. Bose, S. Tarafder, 2011 .

Reverse Micelle‐Mediated Synthesis and Characterization of Tricalcium Phosphate Nanopowder for Bone Graft Applications

S. Bose, S. Dasgupta, 2009 .

Silver doped resorbable tricalcium phosphate scaffolds for bone graft applications.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2017, Materials science & engineering. C, Materials for biological applications.

Synthesis of nanocrystalline hydroxyapatite using surfactant template systems: Role of templates in controlling morphology

S. Bose, S. Banerjee, A. Banerjee, 2009 .

SiO2 and ZnO dopants in three-dimensionally printed tricalcium phosphate bone tissue engineering scaffolds enhance osteogenesis and angiogenesis in vivo.

Susmita Bose, S. Bose, Gary Fielding, 2013, Acta biomaterialia.

Bulk Processing of Hydroxyapatite Nanopowder Using Radio Frequency Induction Plasma

A. Bandyopadhyay, S. Bose, M. Roy, 2010 .

Enhanced osteogenesis of 3D printed β-TCP scaffolds with Cissus Quadrangularis extract-loaded polydopamine coatings.

S. Bose, Samuel F Robertson, 2020, Journal of the mechanical behavior of biomedical materials.

Processing and biocompatibility evaluation of laser processed porous titanium.

B Vamsi Krishna, Amit Bandyopadhyay, Susmita Bose, 2007, Acta biomaterialia.

Polycaprolactone coated porous tricalcium phosphate scaffolds for controlled release of protein for tissue engineering.

A. Bandyopadhyay, S. Bose, Weichang Xue, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Cytotoxic and osteogenic effects of crocin and bicarbonate from calcium phosphates for potential chemopreventative and anti-inflammatory applications in vitro and in vivo.

S. Bose, C. Koski, Naboneeta Sarkar, 2020, Journal of materials chemistry. B.

Natural Medicinal Compounds in Bone Tissue Engineering.

S. Bose, Naboneeta Sarkar, 2019, Trends in biotechnology.

Sustained release of vitamin C from PCL coated TCP induces proliferation and differentiation of osteoblast cells and suppresses osteosarcoma cell growth.

Susmita Bose, S. Bose, Sahar Vahabzadeh, 2019, Materials science & engineering. C, Materials for biological applications.

Effects of vitamin D3 release from 3D printed calcium phosphate scaffolds on osteoblast and osteoclast cell proliferation for bone tissue engineering

Ashley A. Vu, S. Bose, 2019, RSC advances.

Clinical significance of three-dimensional printed biomaterials and biomedical devices

Susmita Bose, Kellen D. Traxel, Ashley A. Vu, 2019, MRS bulletin.

Introduction to Biomaterials and Devices for Bone Disorders

Amit Bandyopadhyay, Susmita Bose, Dishary Banerjee, 2017 .

Surface modifications and cell-materials interactions with anodized Ti.

A. Bandyopadhyay, S. Bose, K. Das, 2007, Acta biomaterialia.

Influence of Electro‐Thermal Polarization on Surface Properties of Hydroxyapatite

A. Bandyopadhyay, S. Bose, S. Bodhak, 2011 .

Tantalum—A bioactive metal for implants

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2010 .

Doped tricalcium phosphate scaffolds by thermal decomposition of naphthalene: Mechanical properties and in vivo osteogenesis in a rabbit femur model.

A. Bandyopadhyay, S. Bose, Dongxu Ke, 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

Laser processing of SiC-particle-reinforced coating on titanium

Vamsi Krishna Balla, Debabrata Basu, Amit Bandyopadhyay, 2010 .

Effects of Oxide Ceramic Addition on Biocompatibility of Titanium

A. Bandyopadhyay, S. Bose, I. Mitra, 2022, The Minerals, Metals & Materials Series.

Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2012, Dental materials : official publication of the Academy of Dental Materials.

Effect of Chemistry on Osteogenesis and Angiogenesis Towards Bone Tissue Engineering Using 3D Printed Scaffolds

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2016, Annals of Biomedical Engineering.

Additively manufactured calcium phosphate reinforced CoCrMo alloy: Bio-tribological and biocompatibility evaluation for load-bearing implants.

Jose D. Avila, A. Bandyopadhyay, S. Bose, 2019, Additive manufacturing.

Engineered porous metals for implants

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2008 .

Low stiffness porous Ti structures for load-bearing implants.

B Vamsi Krishna, Amit Bandyopadhyay, Susmita Bose, 2007, Acta biomaterialia.

Direct comparison of additively manufactured porous titanium and tantalum implants towards in vivo osseointegration.

Nairanjana Dasgupta, Amit Bandyopadhyay, Susmita Bose, 2019, Additive manufacturing.

CoCr Alloys

Kellen D. Traxel, Jose D. Avila, A. Bandyopadhyay, 2020, Biomaterials Science.

Effects of vitamin C on osteoblast proliferation and osteosarcoma inhibition using plasma coated hydroxyapatite on titanium implants.

S. Bose, Naboneeta Sarkar, Hailey Morton, 2020, Surface & coatings technology.

Mechanical and biological properties of ZnO, SiO2, and Ag2O doped plasma sprayed hydroxyapatite coating for orthopaedic and dental applications.

Ashley A. Vu, A. Bandyopadhyay, S. Bose, 2019, Acta biomaterialia.

Mechanical Properties of Bioceramic Coatings on Medical Implants

A. Bandyopadhyay, S. Bose, M. Roy, 2013 .

Antibacterial and biological characteristics of plasma sprayed silver and strontium doped hydroxyapatite coatings

A. Bandyopadhyay, S. Bose, M. Roy, 2012 .

Laser Surface Modification of Electrophoretically Deposited Hydroxyapatite Coating on Titanium

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2008 .

Calcium phosphate coated 3D printed porous titanium with nanoscale surface modification for orthopedic and dental applications.

Amit Bandyopadhyay, Susmita Bose, Dishary Banerjee, 2018, Materials & design.

Pore size and pore volume effects on alumina and TCP ceramic scaffolds

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2003 .

Investigation of In Vitro Bone Cell Adhesion and Proliferation on Ti Using Direct Current Stimulation.

A. Bandyopadhyay, S. Bose, S. Bodhak, 2012, Materials science & engineering. C, Materials for biological applications.

Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy.

A. Bandyopadhyay, V. Balla, S. Bose, 2014, Journal of the mechanical behavior of biomedical materials.

Liposome-Encapsulated Curcumin-Loaded 3D Printed Scaffold for Bone Tissue Engineering.

Susmita Bose, S. Bose, Naboneeta Sarkar, 2019, ACS applied materials & interfaces.

Processing of Mullite–Aluminum Composites

A. Bandyopadhyay, S. Bose, R. Soundararajan, 2001 .

Laser surface modification of metallic biomaterials

A. Bandyopadhyay, V. Balla, S. Bose, 2011 .

Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications

J. Schoenung, A. Bandyopadhyay, S. Bose, 2021, Materials Today.

Compositionally graded yttria-stabilized zirconia coating on stainless steel using laser engineered net shaping (LENS™)

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2007 .

Compositionally Graded Aluminum Oxide Coatings on Stainless Steel Using Laser Processing

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2007 .

3D-printed β-TCP bone tissue engineering scaffolds: Effects of chemistry on in vivo biological properties in a rabbit tibia model

A. Bandyopadhyay, S. Bose, S. Nandi, 2018, Journal of Materials Research.

Effects of SiO 2 and ZnO doping on mechanical and biological properties of 3 D printed TCP scaffolds

A. Bandyopadhyay, S. Bose, Gary A. Fielding, 2012 .

Effect of Synthesis Parameters on Nanocrystalline PZT Powder

S. Bose, A. Banerjee, 2012 .

Understanding long-term silver release from surface modified porous titanium implants.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2017, Acta biomaterialia.

Mechanical degradation of TiO2 nanotubes with and without nanoparticulate silver coating.

A. Bandyopadhyay, S. Bose, A. Shivaram, 2016, Journal of the mechanical behavior of biomedical materials.

Microwave sintering of calcium phosphate ceramics

A. Bandyopadhyay, S. Bose, S. Dasgupta, 2009 .

TiO2 nanotubes on Ti: Influence of nanoscale morphology on bone cell-materials interaction.

A. Bandyopadhyay, S. Bose, K. Das, 2009, Journal of biomedical materials research. Part A.

Calcium Phosphate Ceramics in Drug Delivery and Bone Tissue Engineering

A. Bandyopadhyay, S. Bose, S. Banerjee, 2011 .

Processing of controlled porosity ceramic structures via fused deposition

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 1999 .

Vitamin D3 Release from Traditionally and Additively Manufactured Tricalcium Phosphate Bone Tissue Engineering Scaffolds

Ashley A. Vu, S. Bose, 2019, Annals of Biomedical Engineering.

Vitamin D3 Release from Traditionally and Additively Manufactured Tricalcium Phosphate Bone Tissue Engineering Scaffolds

Ashley A. Vu, S. Bose, 2019, Annals of Biomedical Engineering.

Additive manufacturing of titanium and titanium alloys for biomedical applications

Amit Bandyopadhyay, Susmita Bose, Jose D. Avila, 2018 .

Carbon nanotube reinforced Cu-10Sn alloy composites: Mechanical and thermal properties

Sandip Bysakh, Vamsi Krishna Balla, Debabrata Basu, 2011 .

Laser processed TiN reinforced Ti6Al4V composite coatings.

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2012, Journal of the mechanical behavior of biomedical materials.

Novel Ceramics and Metal-Ceramic Composites via Fused Deposition Process

A. Bandyopadhyay, S. Bose, Raj Atisivan, 1999 .

Influence of simultaneous addition of carbon nanotubes and calcium phosphate on wear resistance of 3D-printed Ti6Al4V

A. Bandyopadhyay, S. Bose, Stanley Dittrick, 2018, Journal of Materials Research.

Effects of PCL, PEG and PLGA polymers on curcumin release from calcium phosphate matrix for in vitro and in vivo bone regeneration.

S. Bose, Dishary Banerjee, Naboneeta Sarkar, 2018, Materials today. Chemistry.

Titanium dioxide thin films for high temperature gas sensors

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2010 .

Hard and Wear Resistant Surfaces for Load Bearing Metal Implants

A. Bandyopadhyay, V. Balla, S. Bose, 2011 .

Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2010 .

Laser-assisted Zr/ZrO(2) coating on Ti for load-bearing implants.

A. Bandyopadhyay, V. Balla, S. Bose, 2009, Acta biomaterialia.

PHOSPHATE CLEAVAGE BY ORGANOIODINANE OXYANION ANALOGUES OF O-IODOSOBENZOATE : EXPERIMENTAL AND COMPUTATIONAL STUDIES

S. Bose, R. Moss, K. Krogh-Jespersen, 1997 .

Translation of 3D printed materials for medical applications

A. Bandyopadhyay, S. Bose, R. Narayan, 2022, MRS Bulletin.

Alloy design via additive manufacturing: Advantages, challenges, applications and perspectives

Kellen D. Traxel, A. Bandyopadhyay, S. Bose, 2022, Materials Today.

3D Printing in alloy design to improve biocompatibility in metallic implants.

A. Bandyopadhyay, S. Bose, M. Yaszemski, 2021, Materials today.

Nature-inspired materials and structures using 3D Printing.

Kellen D. Traxel, A. Bandyopadhyay, S. Bose, 2021, Materials science & engineering. R, Reports : a review journal.

Surface modification of biomaterials and biomedical devices using additive manufacturing.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2018, Acta biomaterialia.

Recent Developments in Metal Additive Manufacturing.

Yanning Zhang, Amit Bandyopadhyay, Susmita Bose, 2020, Current opinion in chemical engineering.

Inconel 718-CoCrMo bimetallic structures through directed energy deposition-based additive manufacturing

A. Bandyopadhyay, S. Bose, V. Champagne, 2022, Materials Science in Additive Manufacturing.

Fused Deposition of Ceramics (FDC) and Composites

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2001 .

Microstructure and wear properties of laser deposited WC–12%Co composites

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2010 .

3D printed tricalcium phosphate scaffolds: Effect of SrO and MgO doping on in vivo osteogenesis in a rat distal femoral defect model.

A. Bandyopadhyay, S. Bose, N. Davies, 2013, Biomaterials science.

Additive Manufacturing

Susmita Bose, Amit Bandyopadhyay, A. Bandyopadhyay, 2019, Additive Manufacturing.

Controlled Release of Soy Isoflavones from 3D Printed Bone Scaffolds for Bone Tissue Engineering.

S. Bose, Naboneeta Sarkar, 2020, Acta biomaterialia.

Oxide Based Sintering Additives for HapCeramics

A. Bandyopadhyay, S. Bose, S. Kalita, 2012 .

Calcium Carbonate Reinforced Natural Polymer Composite For Bone Grafts

A. Bandyopadhyay, S. Bose, S. Kalita, 2002 .

Correction to: Osteoclast‑mediated resorption on additively manufactured porous metal and plasma‑sprayed HA‑coated Ti implants

A. Bandyopadhyay, S. Bose, Dishary Banerjee, 2021, Journal of Materials Research.

3D Printing for Bone Regeneration

A. Bandyopadhyay, S. Bose, I. Mitra, 2020, Current Osteoporosis Reports.

3D printing of biomedical materials and devices

A. Bandyopadhyay, S. Bose, A. Boccaccini, 2021, Journal of Materials Research.

Compression fatigue behavior of laser processed porous NiTi alloy.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2012, Journal of the mechanical behavior of biomedical materials.

Photoluminescence of dense nanocrystalline titanium dioxide thin films: effect of doping and thickness and relation to gas sensing.

A. Bandyopadhyay, S. Bose, Z. Seeley, 2011, ACS applied materials & interfaces.

Fabrication of porous NiTi shape memory alloy structures using laser engineered net shaping.

B Vamsi Krishna, Amit Bandyopadhyay, Susmita Bose, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Multifunctional polydopamine - Zn2+-curcumin coated additively manufactured ceramic bone grafts with enhanced biological properties.

S. Bose, Arjak Bhattacharjee, Arjak Bhattacharjee, 2023, Biomaterials advances.

Improvement of Surface Finish and Reduction of Tool Wear during Hard Turning of AISI D3 using Magnetorheological Damper

S. Bose, J. Babu, B. Girinath, 2018 .

Biomaterials Science - Processing, Properties, and Applications: Narayan/Biomaterials

A. Bandyopadhyay, S. Bose, R. Narayan, 2011 .

Biomaterials science : processing, properties and applications II

A. Bandyopadhyay, S. Bose, R. Narayan, 2012 .

Nanostructured alumina doped TiO 2 ceramics for gas sensors

A. Bandyopadhyay, S. Bose, Young-Jin Choi, 2005 .

Application of Laser Engineered Net Shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2009, Journal of materials science. Materials in medicine.

Introduction to Biomaterials

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2013 .

Bone cell-materials interaction on Si microchannels with bioinert coatings.

A. Bandyopadhyay, S. Bose, R. Condie, 2007, Acta biomaterialia.

Effect of Dopants on Properties of Nanocrystalline Hydroxyapatite

S. Bose, A. Banerjee, 2012 .

Processing of Bioceramic Implants Via Fused Deposition Process

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 1998 .

Thermal degradation of TiO2 nanotubes on titanium

A. Bandyopadhyay, S. Bose, A. Shivaram, 2014 .

Influences of Sr, Zn and Mg Dopants on Osteoclast Differentiation and Resorption

S. Bose, M. Roy, Gary A. Fielding, 2012 .

3D printed hydroxyapatite - Zn2+ functionalized starch composite bone grafts for orthopedic and dental applications.

S. Bose, Arjak Bhattacharjee, 2022, Materials & design.

Doped tricalcium phosphate bone tissue engineering scaffolds using sucrose as template and microwave sintering: enhancement of mechanical and biological properties.

S. Bose, Dongxu Ke, 2017, Materials science & engineering. C, Materials for biological applications.

Controlled release of soy isoflavones from multifunctional 3D printed bone tissue engineering scaffolds

S. Bose, Naboneeta Sarkar, 2020 .

Laser Processing of Net-Shape NiTi Shape Memory Alloy

B. Vamsi Krishna, Amit Bandyopadhyay, Susmita Bose, 2007 .

Additive manufacturing of Ti-Ni bimetallic structures

A. Bandyopadhyay, S. Bose, D. Field, 2022, Materials & design.

Strength of open-cell 6101 aluminum foams under free and constrained compression

A. Bandyopadhyay, S. Bose, B. Krishna, 2007 .

In vitro Wear Rate and Co Ion Release of Compositionally and Structurally Graded CoCrMo-Ti6Al4V Structures.

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2011, Materials science & engineering. C, Materials for biological applications.

Micro‐Layered Manufacturing

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2011 .

Porous metal implants: processing, properties, and challenges

Jose D. Avila, A. Bandyopadhyay, S. Bose, 2023, International journal of extreme manufacturing.

Compressive deformation behaviour of coral Porites Cylindrica

A. Bandyopadhyay, S. Bose, A. Shivaram, 2014 .

Effects of Vitamin A (Retinol) Release from Calcium Phosphate Matrices and Porous 3D Printed Scaffolds on Bone Cell Proliferation and Maturation.

Ashley A. Vu, S. Bose, P. Kushram, 2022, ACS applied bio materials.

JMR early career scholars in materials science annual issue

S. Bose, M. Göken, G. Messing, 2022, Journal of Materials Research.

Three-dimensional printing of biomaterials and soft materials

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2015 .

Thermal Oxide Layer Enhances Crystallinity and Mechanical Properties for Plasma-Sprayed Hydroxyapatite Biomedical Coatings.

Ashley A. Vu, A. Bandyopadhyay, S. Bose, 2020, ACS applied materials & interfaces.

Calcium phosphate-titanium composites for articulating surfaces of load-bearing implants.

A. Bandyopadhyay, S. Bose, T. Gualtieri, 2016, Journal of the mechanical behavior of biomedical materials.

Microwave Sintering of Mullite and Mullite Zirconia Composites

A. Bandyopadhyay, S. Bose, S. Bodhak, 2010 .

Quasi-static Torsional Deformation Behavior of Porous Ti6Al4V alloy.

A. Bandyopadhyay, V. Balla, S. Bose, 2011, Materials science & engineering. C, Materials for biological applications.

Global Engineering and Additive Manufacturing

A. Bandyopadhyay, S. Bose, T. Gualtieri, 2015 .

Free-Standing Lead Zirconate Titanate Nanoparticles: Low-Temperature Synthesis and Densification

S. Bose, A. Banerjee, 2004 .

Surface modification of laser-processed porous titanium for load-bearing implants

Vamsi Krishna Balla, Amit Bandyopadhyay, Susmita Bose, 2008 .

Compositionally Graded Doped Hydroxyapatite Coating using Laser and Plasma Spray Deposition

Ashley A. Vu, A. Bandyopadhyay, S. Bose, 2019 .

Laser surface modification of Al–4Cu–1Mg alloy for enhanced thermal conductivity

A. Bandyopadhyay, V. Balla, S. Bose, 2009 .

Osteoclast-mediated resorption on additively manufactured porous metal and plasma-sprayed HA-coated Ti implants

A. Bandyopadhyay, S. Bose, Dishary Banerjee, 2021, Journal of Materials Research.

Influence of active cooling on microstructure and mechanical properties of wire arc additively manufactured mild steel

Jose D. Avila, A. Bandyopadhyay, S. Bose, 2023, Frontiers in Mechanical Engineering.

Understanding the hemotoxicity of graphene nanomaterials through their interactions with blood proteins and cells

S. Bose, 2018 .

Double Emulsion Droplets as Microreactors for Synthesis of Mesoporous Hydroxyapatite

D. Weitz, A. Bandyopadhyay, S. Bose, 2009 .

Microwave‐sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering

A. Bandyopadhyay, V. Balla, S. Bose, 2013, Journal of tissue engineering and regenerative medicine.

Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants.

A. Bandyopadhyay, Félix A. España, V. Balla, 2010, Acta biomaterialia.

An exceptionally reactive phosphotriester

S. Bose, R. Moss, T. Emge, 1998 .

Micelle encapsulated curcumin and piperine-laden 3D printed calcium phosphate scaffolds enhance in vitro biological properties.

S. Bose, Naboneeta Sarkar, Ujjayan Majumdar, 2023, Colloids and surfaces. B, Biointerfaces.

Interaction of human osteoblasts with bioinert and bioactive ceramic substrates.

Amit Bandyopadhyay, Susmita Bose, A. Bandyopadhyay, 2005, Journal of biomedical materials research. Part A.

Additive Manufacturing of Ceramics

Dongxu Ke, Amit Bandyopadhyay, Susmita Bose, 2015, Additive Manufacturing.

Liposome-Encapsulated Curcumin-Loaded 3D Printed Scaffold for Bone Tissue Engineering.

S. Bose, Naboneeta Sarkar, 2019, ACS applied materials & interfaces.

Effects of SiO2, SrO, MgO, and ZnO dopants in tricalcium phosphates on osteoblastic Runx2 expression.

S. Bose, Gary A. Fielding, William R Smoot, 2014, Journal of biomedical materials research. Part A.

Surface modification of biomaterials and biomedical devices using additive manufacturing.

A. Bandyopadhyay, S. Bose, Samuel F Robertson, 2018, Acta biomaterialia.

Piezoelectric micromachined ultrasonic transducers: modeling the influence of structural parameters on device performance

F. Akasheh, J.D. Fraser, S. Bose, 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.