P. Prangnell

F. J. Humphreys, J. Bowen, P. Prangnell, 1999, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

Microstructure simulation and ballistic behaviour of weld zones in friction stir welds in high strength aluminium 7xxx plate

J. Robson, P. Prangnell, I. Horsfall, 2011 .

Analysis of the billet deformation behaviour in equal channel angular extrusion

J. Bowen, P. Prangnell, A. Gholinia, 2000 .

Porosity Regrowth During Heat Treatment of Hot Isostatically Pressed Additively Manufactured Titanium Components

P. Prangnell, P. Withers, I. Todd, 2016 .

Co-deformation and dynamic annealing effects on the texture development during alpha–beta processing of a model Zr-Nb alloy

P. Prangnell, M. Preuss, J. Quinta da Fonseca, 2020, Acta Materialia.

Loss of High Angle Boundary Area during Annealing a Cryo-SPD Processed Al-Alloy with a Nano-Scale Lamellar Grain Structure

P. Prangnell, Y. Huang, G. H. Zahid, 2012 .

Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure

P. Prangnell, Y. Huang, G. H. Zahid, 2009 .

Modelling texture development during equal channel angular extrusion of aluminium

P. Prangnell, A. Gholinia, P. Bate, 2002 .

A combined approach to microstructure mapping of an Al-Li AA2199 friction stir weld

P. Prangnell, A. Deschamps, A. Steuwer, 2011 .

The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE

P. Prangnell, A. Gholinia, M. Markushev, 2000 .

Microstructural characterisation and mechanical properties of Ti-5Al-5V-5Mo-3Cr built by wire and arc additive manufacture

P. Prangnell, A. Davis, J. Fellowes, 2022, Philosophical Magazine.

Hydrogen-assisted stable crack growth in iron-3 wt% silicon steel

P. Prangnell, J. Knott, M. Strangwood, 1996 .

Interactions between zirconium and manganese dispersoid-forming elements on their combined addition in Al–Cu–Li alloys

J. Robson, P. Prangnell, C. Sigli, 2012 .

Ultrafine-Grain Structures Produced by Severe Deformation Processing

P. Prangnell, C. Heason, P. Apps, 2004 .

Environmental cracking performance of new generation thick plate 7000-T7x series alloys in humid air

J. Robson, P. Prangnell, T. Burnett, 2020 .

The potential for grain refinement of Wire-Arc Additive Manufactured (WAAM) Ti-6Al-4V by ZrN and TiN inoculation

P. Prangnell, E. Pickering, A. Davis, 2021, Additive Manufacturing.

Production of ultra-fine grain microstructures in Al–Mg alloys by coventional rolling

F. J. Humphreys, Ali Gholinia, Philip B. Prangnell, 2002 .

High-Strain Rate Superplasticity in Three Contrasting Fine Grained Aluminum Alloys

P. Prangnell, J. S. Kim, G. H. Zahid, 1999 .

Superplasticity in an alulllinium alloy 2124/SiCp composite

P. Prangnell, G. H. Zahid, R. Todd, 1998 .

Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–Cu–Li alloy AA2195

P. Prangnell, B. Rodgers, 2016 .

Predicting recrystallised volume fraction in aluminium alloy 7050 hot rolled plate

J. Robson, P. Prangnell, 2002 .

CALPHAD-informed phase-field model for two-sublattice phases based on chemical potentials: η-phase precipitation in Al-Zn-Mg-Cu alloys

P. Prangnell, D. Raabe, P. Shanthraj, 2021, Acta Materialia.

Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

J. Robson, P. Prangnell, L. Bourgeois, 2022, Progress in Materials Science.

Microstructure refinement and mechanical properties of severely deformed Al–Mg–Li alloys

P. Prangnell, Z. C. Wang, 2002 .

The formation of nanograin structures and accelerated room-temperature theta precipitation in a severely deformed Al–4 wt.% Cu alloy

J. Robson, P. Prangnell, Yan Huang, 2010 .

Process response of Inconel 718 to wire + arc additive manufacturing with cold metal transfer

P. Prangnell, R. Morana, M. Roy, 2020 .

J. Robson, P. Prangnell, Chaoqun Zhang, 2016 .

Microstructure and performance of a biodegradable Mg–1Ca–2Zn–1TCP composite fabricated by combined solidification and deformation processing

P. Prangnell, Yan Huang, D. Liu, 2012 .

On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing

Hao Zhao, Filomeno Martina, Philip B. Prangnell, 2019, Acta Materialia.

Dispersoid precipitation and process modelling in zirconium containing commercial aluminium alloys

Joseph D. Robson, Philip B. Prangnell, J. Robson, 2001 .

The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al–Cu–Li AA2198 sheet

P. Prangnell, D. Tsivoulas, 2014 .

Dynamic Recovery during Low Temperature Deformation in an Al‐0.1 Mg Alloy

P. Prangnell, Y. Huang, 2012 .

The effect of cryogenic deformation on the limiting grain size in an SMG Al-alloy

P. Prangnell, Y. Huang, Y. Huang, 2008, Journal of Materials Science.

Mechanisms of Formation of Submicron Grain Structures by Severe Deformation

P. Prangnell, Yan Huang, M. Berta, 2007 .

The effect of coarse second-phase particles on the rate of grain refinement during severe deformation processing

J. Bowen, P. Prangnell, P. Apps, 2003 .

The solidification behaviour of dilute aluminium–scandium alloys

P. Prangnell, A. Norman, A. Norman, 1998 .

Grain structure formation during friction stir welding observed by the ‘stop action technique’

P. Prangnell, C. Heason, 2005 .

Ultra-fine grain structures in aluminium alloys by severe deformation processing

J. Bowen, P. Prangnell, P. Apps, 2004 .

The effect of dispersoids on the grain refinement mechanisms during deformation of aluminium alloys to ultra-high strains

P. Prangnell, M. Berta, P. Apps, 2005 .

Texture Evolution and Grain Refinement in Al Deformed to Ultra-High Strains by Accumulative Roll Bonding (ARB)

P. Prangnell, C. Heason, 2002 .

Modeling of Intermetallic Compounds Growth Between Dissimilar Metals

Li Wang, Joseph D. Robson, Philip B. Prangnell, 2015, Metallurgical and Materials Transactions A.

Modelling intermetallic phase formation in dissimilar metal ultrasonic welding of aluminium and magnesium alloys

J. Robson, P. Prangnell, A. Panteli, 2012 .

Microstructural characterization and mechanical properties of high power ultrasonic spot welded aluminum alloy AA6111–TiAl6V4 dissimilar joints

Joseph D. Robson, Philip B. Prangnell, J. Robson, 2014 .

Stewart Williams, Goncalo Pardal, Philip B. Prangnell, 2014 .

The effect of cooling rate on the morphology of primary Al3Sc intermetallic particles in Al–Sc alloys

P. Prangnell, A. Norman, K. Hyde, 2001 .

The Influence of Grain Structure on Intermetallic Compound Layer Growth Rates in Fe-Al Dissimilar Welds

J. Robson, P. Prangnell, Lei Xu, 2018, Metallurgical and Materials Transactions A.

Stability of nugget zone grain structures in high strength Al-alloy friction stir welds during solution treatment

P. Prangnell, A. Norman, A. Norman, 2003 .

Numerical prediction of the development of particle stress in the forging of aluminium metal matrix composites

Philip J. Withers, Jan Kusiak, S. M. Roberts, 1996 .

Ultrasonic spot welding of aluminium to steel for automotive applications—microstructure and optimisation

Y. Chen, P. Prangnell, F. Haddadi, 2011 .

Evaluation of Zn-rich coatings for IMC reaction control in aluminum-magnesium dissimilar welds

P. Prangnell, Y. Wang, 2018 .

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

P. Prangnell, P. Withers, S. Roberts, 1996 .

Comparison of the Effect of Individual and Combined Zr and Mn Additions on the Fracture Behavior of Al-Cu-Li Alloy AA2198 Rolled Sheet

P. Prangnell, D. Tsivoulas, 2014, Metallurgical and Materials Transactions A.

Effect of welding parameters on the solidification microstructure of autogenous TIG welds in an Al-Cu-Mg-Mn alloy

P. Prangnell, A. Norman, V. Drazhner, 1999 .

Finite element modelling of equal channel angular extrusion

S. M. Roberts, Philip B. Prangnell, P. Prangnell, 1997 .

Microstructural evolution during formation of ultrafine grain structures by severe deformation

F. J. Humphreys, J. Bowen, P. Prangnell, 2000 .

Interactions between precipitation and recrystallisation in an Al–Mg–Si alloy

F. J. Humphreys, P. Prangnell, S. Lillywhite, 2000 .

Discontinuous precipitation in high Li content AlLiZr alloys

P. Prangnell, W. Stobbs, D. Özkaya, 1994 .

Effect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir welds

P. Prangnell, A. Norman, S. Williams, 2003 .

The effect of a paint bake treatment on joint performance in friction stir spot welding AA6111-T4 sheet using a pinless tool

P. Prangnell, Ying Chen, D. Bakavos, 2013 .

Interface structure and bonding in abrasion circle friction stir spot welding: A novel approach for rapid welding aluminium alloy to steel automotive sheet

Ali Gholinia, Philip B. Prangnell, Y. Chen, 2012 .

3.03 – Precipitation Behaviors in MMCs

P. Prangnell, 2000 .

The effect of high strain rate deformation on intermetallic reaction during ultrasonic welding aluminium to magnesium

J. Robson, P. Prangnell, I. Brough, 2012 .

Interfacial Segregation of Alloying Elements During Dissimilar Ultrasonic Welding of AA6111 Aluminum and Ti6Al4V Titanium

S. Haigh, J. Robson, P. Prangnell, 2019, Metallurgical and Materials Transactions A.

Ultra-Fine Grained High Carbon Steel by Innovative Deformation

P. Prangnell, D. Crowther, P. Apps, 2007 .

Effect of processing route and second phase particles on grain refinement during equal-channel angular extrusion

P. Prangnell, M. Berta, P. Apps, 2005 .

Stability of Ultra-Fine ‘Grain Structures’ Produced by Severe Deformation

J. Bowen, P. Prangnell, P. Bate, 2004 .

Microstructural parameters and flow stress in Al–0.13% Mg deformed by ECAE processing

J. Bowen, P. Prangnell, N. Hansen, 2004 .

Grain Refinement and Texture Evolution during the Deformation of Al to Ultra-High Strains by Accumulative Roll Bonding (ARB)

P. Prangnell, C. Heason, 2002 .

High Resolution EBSD Analysis of the Grain Structure in an AA2024 Friction Stir Weld

P. Prangnell, A. Norman, I. Brough, 2000 .

The significance of intermetallic compounds formed during interdiffusion in aluminum and magnesium dissimilar welds

P. Prangnell, Y. Wang, 2017 .

Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components

Paul A. Colegrove, Jan Hönnige, Filomeno Martina, 2017 .

Influence of Galvanized Coatings on Abrasion Circle Friction Stir Spot Welding Aluminium to Steel for Automotive Applications

P. Prangnell, Ying Chen, S. Liu, 2014 .

The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting

Philip J. Withers, Iain Todd, Philip B. Prangnell, 2016, Metallurgical and Materials Transactions A.

Material Interactions in a Novel Pinless Tool Approach to Friction Stir Spot Welding Thin Aluminum Sheet

Laurent Babout, P. Prangnell, L. Babout, 2011 .

Room temperature instability of an Al-4%Cu super saturated solid solution in a nano-crystalline alloy produced by SPD

J. Robson, P. Prangnell, Y. Huang, 2010 .

Modelling Al3Zr dispersoid precipitation in multicomponent aluminium alloys

J. Robson, P. Prangnell, 2003 .

Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten

P. Prangnell, P. Fox, Yingtao Tian, 2019, International Journal of Refractory Metals and Hard Materials.

The effect of loading direction on strain localisation in wire arc additively manufactured Ti–6Al–4V

P. Prangnell, F. Martina, D. Lunt, 2020 .

Microstructural Interactions during Stress Ageing a 7475 Aerospace Alloy

P. Prangnell, B. Bès, D. Bakavos, 2006 .

The Effectiveness of Surface Coatings on Preventing Interfacial Reaction During Ultrasonic Welding of Aluminum to Magnesium

J. Robson, P. Prangnell, A. Panteli, 2013, Metallurgical and Materials Transactions A.

CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in Al-Zn-Mg-Cu alloys

P. Prangnell, D. Raabe, B. Gault, 2021, 2104.05791.

P. Prangnell, S. Williams, G. Pardal, 2014, The International Journal of Advanced Manufacturing Technology.

Structure and mechanical behaviour of an Al-Mg alloy after equal channel angular extrusion

P. Prangnell, A. Gholinia, M. Murashkin, 1999 .

The effect of silver on microstructural evolution in two 2xxx series Al-alloys with a high Cu:Mg ratio during ageing to a T8 temper

P. Prangnell, B. Bès, D. Bakavos, 2008 .

The Influence of Extended and Variable Pre-Stretching on the Strength of AA2195 Alloy Taper-Rolled Plates

P. Prangnell, B. Rodgers, R.J. Cinderey, 2016 .

Effects of Combined Zr and Mn Additions on Dispersoid Formation and Recrystallisation Behaviour of AA2198 Sheet

P. Prangnell, C. Sigli, B. Bès, 2010 .

Grain refinement response during twist extrusion of an Al-0.13% Mg alloy

Dmitry Orlov, Philip B. Prangnell, P. Prangnell, 2007 .

Orientation splitting and its contribution to grain refinement during equal channel angular extrusion

P. Prangnell, Y. Huang, 2008, Journal of Materials Science.

Stationary shoulder FSW for joining high strength aluminum alloys

P. Prangnell, Hao Wu, D. Strong, 2015 .

Weld zone and residual stress development in AA7050 stationary shoulder friction stir T-joint weld

P. Prangnell, P. Withers, C. Simpson, 2019, Journal of Materials Processing Technology.

The effect of shoulder coupling on the residual stress and hardness distribution in AA7050 friction stir butt welds

P. Prangnell, P. Withers, A. Reynolds, 2017, Materials Science and Engineering: A.

Comparison of residual stress distributions in conventional and stationary shoulder high-strength aluminum alloy friction stir welds

Matthew Roy, Philip J. Withers, Philip B. Prangnell, 2017 .

The Effect of Small Scandium Additions to AA7050 on the As-Cast and Homogenized Microstructure

J. Robson, P. Prangnell, F. Costello, 2002 .

Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting

Philip B. Prangnell, P. Prangnell, A. Antonysamy, 2013 .

Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components

D. Hand, P. Prangnell, Yingtao Tian, 2018 .

A Comparison of the Stress Relaxation Behaviour of Three Aluminium Aerospace Alloys for use in Age-Forming Applications

P. Prangnell, R. Dif, R. Robey, 2004 .

The Effectiveness of Grain Refinement by Machine Hammer Peening in High Deposition Rate Wire-Arc AM Ti-6Al-4V

P. Prangnell, S. Williams, J. Hönnige, 2020, Metallurgical and Materials Transactions A.

Cast microstructure and dispersoid formation in spray deposited Al–Li alloys

P. Prangnell, A. Gholinia, 1999 .

The Effects of Second Phase Particles, Dislocation Density and Grain Boundaries on the Electrical Conductivity of Aluminium Alloys

P. Prangnell, R. Pilkington, G. Lorimer, 1996 .

Decomposition of the supersaturated solid solution in a rapidly solidified hypereutectic AlCu alloy

P. Prangnell, S. C. Gill, 1994 .

The Effectiveness of Al-Si Coatings for Preventing Interfacial Reaction in Al-Mg Dissimilar Metal Welding

P. Prangnell, Y. Wang, B. Al-Zubaidy, 2017, Metallurgical and Materials Transactions A.

Preliminary Investigation into the Suitability of 2xxx Alloys for Wire-Arc Additive Manufacturing

Stewart Williams, Jialuo Ding, Philip B. Prangnell, 2016 .

The influence of temperature on microstructural damage during uniaxial compression of aluminium matrix composites

P. Prangnell, P. Withers, S. Roberts, 1995 .

THE DEFORMATION OF DISCONTINUOUSLY REINFORCED MMCS .1. THE INITIAL YIELDING BEHAVIOR

P. Prangnell, P. Withers, W. Stobbs, 1994 .

Effect of Interfacial Reaction on the Mechanical Performance of Steel to Aluminum Dissimilar Ultrasonic Spot Welds

Yingchun Chen, Joseph D. Robson, Philip B. Prangnell, 2015, Metallurgical and Materials Transactions A.

Automated Multi-Scale Microstructure Heterogeneity Analysis of Selective Electron Beam Melted TiAl6V4 Components

P. Prangnell, A. Antonysamy, Hao Zhao, 2015 .

The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components

P. Prangnell, P. Withers, I. Todd, 2017, Scientific Reports.

Control of weld composition when arc welding high strength aluminium alloys using multiple filler wires

P. Prangnell, S. Williams, C. Derry, 2010 .

Control of weld composition when welding high strength aluminium alloy using the tandem process

J. Robson, P. Prangnell, S. Williams, 2009 .

Predicting the Influence of Porosity on the Fatigue Performance of Titanium Components Manufactured by Selective Electron Beam Melting

P. Prangnell, P. Withers, I. Todd, 2016 .

Coating Design for Controlling Phase IMC Formation in Dissimilar Al-Mg Metal Welding

J. Robson, P. Prangnell, Y. Wang, 2016 .

Coating Design for Controlling β Phase IMC Formation in Dissimilar Al-Mg Metal Welding

J. Robson, P. Prangnell, Y. Wang, 2015 .

Effect of Zinc Coatings on Joint Properties and Interfacial Reactions in Aluminum to Steel Ultrasonic Spot Welding

P. Prangnell, D. Strong, F. Haddadi, 2012 .

Novel Approaches to Friction Spot Welding Thin Aluminium Automotive Sheet

P. Prangnell, D. Bakavos, Dimitrios Bakavos, 2010 .

Processing to ultrafine grain structures by conventional routes

F. J. Humphreys, P. Prangnell, A. Gholinia, 2000 .

The Effect of Thermal History on Microstructural Evolution, Cold-Work Refinement and {\alpha}/\b{eta} Growth in Ti-6Al-4V Wire + Arc AM

P. Prangnell, P. Colegrove, A. Ho, 2018, 1811.02903.

Optimization of Aluminium-to-Magnesium Ultrasonic Spot Welding

P. Prangnell, A. Panteli, D. Strong, 2012 .

Development of new high strength Al – Sc filler wires for fusion welding 7000 series aluminium aerospace alloys

P. Prangnell, A. Norman, S. Birley, 2003 .

Modelling and visualisation of material flow in friction stir spot welding

Yingchun Chen, Aidan Reilly, Hugh Shercliff, 2015 .

Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis

P. Prangnell, F. Martina, J. Hönnige, 2020 .

Novel processing routes to ultrafine grained steel

F. J. Humphreys, J. Bowen, P. Prangnell, 2001 .

Computational study of the geometrical influence of grain topography on short crack propagation in AA7XXX series alloys

P. Prangnell, P. Shanthraj, T. Burnett, 2023, Materialia.

Ultrafine grain structures formed by thermomechanical processing of spray cast Al–Li alloys

P. Prangnell, P. Withers, A. Gholinia, 1999 .

Ageformable panels for commercial aircraft

Frank Eberl, S. Gardiner, Philip B. Prangnell, 2008 .

Automated image mapping and quantification of microstructure heterogeneity in additive manufactured Ti6Al4V

Philip Prangnell, Hao Zhao, P. Prangnell, 2019, Materials Characterization.

A Comparison of the Effects of Ageforming on the Precipitation Behaviour in 2xxx, 6xxx and 7xxx Aerospace Alloys

P. Prangnell, D. Bakavos, B. C. Muddle, 2004 .

Mechanical and Microstructural Characterization of Percussive Arc Welded Hyper-Pins for Titanium to Composite Metal Joining

P. Prangnell, O. Ciuca, Andre de Oliveira, 2013 .

The effect of temperature on the formability of a high strength aluminium automotive alloy

P. Prangnell, J. Q. D. Fonseca, Megan Kulas, 2013 .

3D inspection of fabrication and degradation processes from X-ray (micro) tomography images using a hole closing algorithm

L. Babout, P. Prangnell, P. Withers, 2010, 2010 IEEE International Conference on Imaging Systems and Techniques.

Through Thickness Microstructural Gradients in 7475 and 2022 Creep - Ageformed Bend Coupons

Frank Eberl, Philip B. Prangnell, P. Prangnell, 2006 .

Mechanisms of environmentally induced crack initiation in humid air in new generation Al-Zn-Mg-Cu alloys

P. Prangnell, T. Burnett, C. Grant, 2023, CORROSION.

The deformation of discontinuously reinforced MMCs—II. The elastic response

P. Prangnell, P. Withers, W. Stobbs, 1994 .

The Growth Morphology and Nucleation Mechanism of Primary Ll2 Al3Sc Particles in Al-Sc Alloys

P. Prangnell, K. Hyde, A. Norman, 2000 .

Integrated Modelling of the Friction Stir Welding Process

Paul A. Colegrove, N. Kamp, Stewart Williams, 2006 .

Modelling of Friction Stir Welded AA2139 Aluminium Alloy Panels in Tension and Blast

J. Robson, P. Prangnell, Q. Li, 2022, International Journal of Impact Engineering.

Systematic Evaluation of the Advantages of Static Shoulder FSW for Joining Aluminium

P. Prangnell, Ying Chen, Hao Wu, 2014 .

Geometry Effects when Controlling Residual Stresses in Friction Stir Welds by Mechanical Tensioning

P. Prangnell, P. Withers, A. Wescott, 2006 .

Assessment by X-ray CT of the effects of geometry and build direction on defects in titanium ALM parts

Philip J. Withers, Fabien Léonard, Philip B. Prangnell, 2012 .

Forging of ‘H’ sections from aluminium metal matrix composite bars, modelled using the finite element method

P. Prangnell, P. Withers, S. Roberts, 1994 .

POTENTIAL FOR IN-SITU SOLUTIONISATION OF WIRE AND ARC ADDITIVE MANUFACTURED (WAAM) 2XXX ALUMINIUM ALLOYS

P. Prangnell, E. Eimer, B. Chéhab, 2018 .

Modeling of the Thermal Field in Dissimilar Alloy Ultrasonic Welding

Hugh Shercliff, Li Wang, Joseph D. Robson, 2015, Journal of Materials Engineering and Performance.

Analysis of the Homogeneity of Particle Refinement in Friction Stir Processing Al-Si Alloys

P. Prangnell, C. Chan, S. Barnes, 2010 .

Quantification of Microstructural Homogeneity and the Mechanisms of Particle Refinement During FSP of Al-Si Alloys

P. Prangnell, C. Y. Chan, 2010 .

The Stability of the Nugget Zone Grain Structure in AA7010 Alloy Friction Stir Welds during Solution Treatment

P. Prangnell, A. Norman, K. Hassan, 2002 .

Orientation correlations in aluminium deformed by ECAE

J. Bowen, P. Prangnell, O. Mishin, 2002 .

Accelerated Post‐Weld Natural Ageing in Ultrasonic Welding Aluminium 6111‐T4 Automotive Sheet

P. Prangnell, Ying-Chun Chen, 2012 .