J. Hua

发表

The Rationale for CAD-CAM Uncemented Custom Hips: An Interim Assessment

J. Hua, P. Walker, W. Muirhead-Allwood, 1995 .

A comparison of cortical strain following cemented and uncemented proximal and distal femoral replacement

J. Hua, P. Walker, 1991 .

A comparison of cortical strain after cemented and press‐fit proximal and distal femoral replacement

P S Walker, J. Hua, P. Walker, 1992, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Use of mesenchymal stem cells to enhance bone formation around revision hip replacements

A. Goodship, J. Hua, G. Blunn, 2008, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Muscle atrophy and metal-on-metal hip implants

J. Hua, A. Guppy, A. Hart, 2015, Acta orthopaedica.

Comparison of mesenchymal stem cell proliferation and differentiation between biomimetic and electrochemical coatings on different topographic surfaces

J. Hua, G. Blunn, J. Knowles, 2012, Journal of Materials Science: Materials in Medicine.

Preoperative Simulation System for the ZCHW Custom Hip Prosthesis and Its Usage Through the Internet

Jia Hua, Yukio Yoshida, Nobuhiko Tanaka, 2001 .

Analysis and 5-year clinical experience with a CAD-CAM custom hip revision cases

J. Hua, P. Walker, S. Culligan, 1997 .

Mesenchymal stem cells with increased stromal cell-derived factor 1 expression enhanced fracture healing.

J. Hua, G. Blunn, M. Coathup, 2015, Tissue engineering. Part A.

Calculating the hip center of rotation using contralateral pelvic anatomy

J. Hua, J. Henckel, A. Hart, 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Can mesenchymal stem cells survive under normal impaction force in revision total hip replacements?

A. Goodship, J. Hua, G. Blunn, 2006, Tissue engineering.

Agreement Between Faculty and %Comparison for Preparation Depth Assessment in a Dental Technique Skills Course.

J. Hua, R. Sadid-Zadeh, Hema Arany, 2019, Journal of dental education.

On the Morphological Deviation in Additive Manufacturing of Porous Ti6Al4V Scaffold: A Design Consideration

J. Hua, Chaozong Liu, M. Moazen, 2022, Materials.

Stem cell engineered bone with calcium-phosphate coated porous titanium scaffold or silicon hydroxyapatite granules for revision total joint arthroplasty

J. Hua, G. Blunn, E. García-Gareta, 2014, Journal of Materials Science: Materials in Medicine.

Enhanced wear and corrosion in modular tapers in total hip replacement is associated with the contact area and surface topography

J. Hua, G. Blunn, A. Hart, 2013, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Mesenchymal stem cells with increased SDF-1 expression enhanced fracture healing

J. Hua, G. Blunn, M. Coathup, 2014 .

Stress Shielding and Bone Resorption of Press-Fit Polyether–Ether–Ketone (PEEK) Hip Prosthesis: A Sawbone Model Study

J. Hua, Chaozong Liu, Ling Wang, 2022, Polymers.

The effect of mesenchymal stromal cells on the osseoinduction of impaction grafts.

J. Hua, G. Blunn, N. Heidari, 2010, Tissue engineering. Part A.

Osseointegration of acellular and cellularized osteoconductive scaffolds: is tissue engineering using mesenchymal stem cells necessary for implant fixation?

J. Hua, G. Blunn, E. García-Gareta, 2015, Journal of biomedical materials research. Part A.

Stability and Bone Preservation in Custom Designed Revision Hip Stems

J. Hua, P. Walker, G. Bentley, 2000, Clinical orthopaedics and related research.

Biomimetic surface functionalization of clinically relevant metals used as orthopaedic and dental implants

J. Hua, G. Blunn, J. Knowles, 2017, Biomedical materials.

The use of hydroxyapatite-coated CAD-CAM femoral components in adolescents and young adults with inflammatory polyarthropathy: ten-year results.

J. Hua, P. Walker, C. McCullough, 2006, The Journal of bone and joint surgery. British volume.

Clinical Usefulness of SPECT-CT in Patients with an Unexplained Pain in Metal on Metal (MOM) Total Hip Arthroplasty.

J. Hua, J. Henckel, S. Wan, 2015, The Journal of arthroplasty.

Prediction of clinical outcome of THR from migration measurements on standard radiographs. A study of cemented Charnley and Stanmore femoral stems.

P S Walker, J. Hua, P. Walker, 1995, The Journal of bone and joint surgery. British volume.

Uncemented total hip arthroplasty with subtrochanteric derotational osteotomy for severe femoral anteversion.

J. Hua, P. Walker, S. Muirhead-Allwood, 1999, The Journal of arthroplasty.

The Effect of a Lateral Flare Feature on Uncemented Hip Stems

J. Hua, P. Walker, G. Bentley, 1999 .

Uncemented computer-assisted design-computer-assisted manufacture femoral components in revision total hip replacement: a minimum follow-up of ten years.

J. Hua, P. Walker, J. Skinner, 2010, The Journal of bone and joint surgery. British volume.

Metal on metal hip resurfacing versus uncemented custom total hip replacement - early results

J. Hua, J. Skinner, N. Sandiford, 2010, Journal of orthopaedic surgery and research.

Accuracy of using radiographs for custom hip stem design.

P S Walker, J. Hua, P. Walker, 1996, The Journal of arthroplasty.

Screen Key Genes Associated with Distraction-Induced Osteogenesis of Stem Cells Using Bioinformatics Methods

J. Hua, Wenhui Song, Jishizhan Chen, 2021, International journal of molecular sciences.

Correlation of radiographic and telemetric data from massive implant fixations.

J. Hua, S. Taylor, A. Shah, 2006, Journal of biomechanics.

Relative motion of hip stems under load. An in vitro study of symmetrical, asymmetrical, and custom asymmetrical designs.

P S Walker, J. Hua, P. Walker, 1994, The Journal of bone and joint surgery. American volume.

A novel hybrid design and modelling of a customised graded Ti-6Al-4V porous hip implant to reduce stress-shielding: An experimental and numerical analysis

J. Hua, Chaozong Liu, M. Moazen, 2023, Frontiers in Bioengineering and Biotechnology.

Custom Uncemented Revision Stems Based on a Femoral Classification

J. Hua, P. Walker, G. Bentley, 2010 .

Uncemented custom computer-assisted design and manufacture of hydroxyapatite-coated femoral components: survival at 10 to 17 years.

J. Hua, P. Walker, J. Skinner, 2010, The Journal of bone and joint surgery. British volume.

Closeness of fit of uncemented stems improves the strain distribution in the femur

J. Hua, P. Walker, Peter Walker, 1995, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Migration of the uncemented CLS femoral component.

J. Hua, P. Walker, D. Ward, 1999, Orthopedics.

Biomechanical Principles in Designing Custom-Made Hip Prosthesis

J. Hua, 2020 .

Migration of the uncemented CLS acetabular component.

J. Hua, P. Walker, D. Ward, 1999, Orthopedics.

The effect of temperature on the viability of human mesenchymal stem cells

J. Hua, G. Blunn, M. Korda, 2013, Stem Cell Research & Therapy.

Long-term dynamic compression enhancement TGF-β3-induced chondrogenesis in bovine stem cells: a gene expression analysis

J. Hua, Wenhui Song, Jishizhan Chen, 2021, BMC genomic data.

ENHANCED WEAR AND CORROSION IN MODULAR TAPERS IN TOTAL HIP REPLACEMENT - AN IN-VITRO BIOMECHANICAL STUDY

J. Hua, G. Blunn, S. Muirhead-Allwood, 2012 .