X. Shan

发表

Rotating-tool diamond turning of Fresnel lenses on a roller mold for manufacturing of functional optical film

A. Kumar, Xinquan Zhang, Rui Huang, 2018 .

Assembly and characterization of micromachined combustor

X. Shan, Z. Wang, Y. Jin, 2004, Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004) (IEEE Cat. No.04EX971).

Roll-to-roll embossing of optical linear Fresnel lens polymer film for solar concentration.

Xinquan Zhang, Kui Liu, X. Shan, 2014, Optics express.

Large Scale Triboelectric Nanogenerator and Self-Powered Pressure Sensor Array Using Low Cost Roll-to-Roll UV Embossing

X. Shan, F. Tay, Zhiping Wang, 2016, Scientific Reports.

Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation

Yee Cheong Lam, Hiong Yap Gan, X. Shan, 2009 .

Development of 1 × 4 MEMS-based optical switch

Wilfried Noell, Siak Piang Lim, Xue Chuan Shan, 2004 .

A novel self-sensitive SFM for nondestructive measurement of tiny vertical surfaces with restricted access

X. Shan, Y. Murakoshi, R. Maeda, 2003, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2003..

Microstructure formation via roll-to-roll UV embossing using a flexible mould made from a laminated polymer–copper film

X. Shan, Z. Zhong, Z. Zhong, 2012 .

Formation of large format functional films via roll-to-roll (R2R) ultraviolet (UV) embossing

X. Shan, A. Lu, T. Liu, 2011, 2011 IEEE 13th Electronics Packaging Technology Conference.

Roll-to-roll large-format slot die coating of photosensitive resin for UV embossing

X. Shan, Z. Zhong, S. J. Wong, 2011 .

Process study on roll-to-roll ultraviolet (UV) embossing

X. Shan, Z. Zhong, C. W. Lu, 2010, 2010 12th Electronics Packaging Technology Conference.

Parametric investigation of flexographic printing processes for R2R printed electronics

X. Shan, Z. Zhong, S. Chen, 2020 .

Investigation of Antiadhesive Coatings for Nanoimprinting Lithography

X. Shan, Z. Zhong, Y. Yao, 2010 .

Large area roll-to-roll screen printing of electrically conductive circuitries

X. C. Shan, B. Salam, X. Shan, 2016, 2016 IEEE 18th Electronics Packaging Technology Conference (EPTC).

Washability of Flexible Printed Circuitry for Wearable Electronics Applications

X. Shan, B. Salam, B. Lok, 2020, 2020 IEEE 22nd Electronics Packaging Technology Conference (EPTC).

A polymer-metal hybrid flexible mould and application for large area hot roller embossing

X. Shan, C. W. Lu, L. Jin, 2010 .

Large area micro roller embossing using low cost flexible mould fabricated from polymer-metal film

X. Shan, C. W. Lu, L. Jin, 2010, 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP).

Micromachining of a roller mould and roll-to-roll imprinting to form large area optical films with radial Fresnel lens arrays

Xinquan Zhang, Rui Huang, Kui Liu, 2017 .

Mechanical and electrical characteristics of screen printed stretchable circuits on thermoplastic polyurethane

X. Shan, Z. Zhong, M. Goh, 2017, 2017 IEEE 19th Electronics Packaging Technology Conference (EPTC).

Development of a roll-to-roll thermal imprinting system with seamless belt-type template

X. Shan, J. Wei, S. Chen, 2017 .

Process considerations, process challenges and manufacturing systems for roll-to-roll processing

X. Shan, J. Wei, B. Salam, 2016, 2016 IEEE 18th Electronics Packaging Technology Conference (EPTC).

Roll-to-roll thermal embossing for large area microstructure formation and application

X. Shan, M. B. Mohahidin, 2015, 2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP).

Roll-to-roll (R2R) hot embossing for structuring 3D microstructures on polymer films

X. Shan, A. Lu, M. B. Mohahidin, 2012, 2012 IEEE 14th Electronics Packaging Technology Conference (EPTC).

UV curing kinetic of high performance epoxy resin for Roll-to-Roll UV embossing

F. L. Ng, X. Shan, M. Abadie, 2010, 2010 12th Electronics Packaging Technology Conference.

Development of a low-cost 8/spl times/8 optical switch using micro hot embossing

X. Shan, R. Maeda, 2002, IEEE/LEOS International Conference on Optical MEMs.

Experimental studies on polymer deformation and flow in micro hot embossing

X. Shan, Y. Lam, Harsono, 2006, 2006 8th Electronics Packaging Technology Conference.

Roll-to-Roll Gravure Printing of Electric Heaters on Polymeric Substrates

X. Shan, B. Salam, B. Lok, 2020, 2020 IEEE 22nd Electronics Packaging Technology Conference (EPTC).

Modeling of the effect of heat flux on replication accuracy using roll-to-roll micro hot embossing

X. Shan, Z. Zhong, S. Chen, 2016, 2016 IEEE 18th Electronics Packaging Technology Conference (EPTC).

Study of mechanical response in micro-indentation of laminated ceramic green substrates

X. Shan, Y. Liu, 2009 .

Hot roller embossing of multi-dimensional microstructures using elastomeric molds

X. Shan, S. Chen, Z. Zhong, 2017, Microsystem Technologies.

Microstructure formation on low temperature co-fired ceramic green substrates using micro embossing

S. H. Ling, H. P. Maw, X. Shan, 2008 .

Applications of micro hot embossing for optical switch formation

Ryutaro Maeda, Xue Chuan Shan, Tsuyoshi Ikehara, 2005 .

A study of screen printing of stretchable circuits on polyurethane substrates

Zhaowei Zhong, X. C. Shan, S. H. Chen, 2019 .

The edge-effect on roll-to-roll thermal embossing of micro channels

X. Shan, Z. Zhong, Y. Z. Lim, 2015 .

The edge-effect on roll-to-roll thermal embossing of micro channels

X. Shan, Z. Zhong, Y. Z. Lim, 2014, Microsystem Technologies.

Numerical and experimental study of the filling stage of roll-to-roll UV embossing process with micro features

Xu Song, X. C. Shan, S. L. Chow, 2015 .

Micro Hot Embossing for Replication of Microstructures

R. Maeda, Y. Murakoshi, X. Shan, 2002, 2002 International Microprocesses and Nanotechnology Conference, 2002. Digest of Papers..

A Process Study of Laser Patterning of Different Conductive Layers for Printed Electronics

X. Shan, G. Lim, Wenhe Feng, 2019, 2019 IEEE 21st Electronics Packaging Technology Conference (EPTC).

Laser patterning of printed silver for selective lighting of electroluminescence film

X. Shan, J. N. Tey, Hongyu Y Zheng, 2019, Journal of Manufacturing Processes.

Studies on a micro combustor for gas turbine engines

Ryutaro Maeda, Yufeng Jin, C. K. Wong, 2005 .

A study of screen printing of stretchable circuits on polyurethane substrates

X. Shan, S. Chen, Z. Zhong, 2018, Microsystem Technologies.

Hot roller embossing of multi-dimensional microstructures using elastomeric molds

X. Shan, S. Chen, Z. Zhong, 2018 .

Study on micro hot embossing of low temperature co-firable ceramic green substrates

S. H. Ling, H. P. Maw, X. Shan, 2009 .

Solvent-assisted low pressure room temperature lamination of low temperature cofirable ceramic green tapes for formation of embedded micro channels

H. P. Maw, X. Shan, C. Lu, 2010 .

A micro roller embossing process for structuring large-area substrates of laminated ceramic green tapes

X. Shan, C. W. P. Shi, L. Jin, 2009 .

Printing Process of Electrically Conductive Silver on Heat Transfer Polymer Substrates for Wearable Electronics Applications

X. Shan, B. Salam, B. Lok, 2019, 2019 IEEE 21st Electronics Packaging Technology Conference (EPTC).

Process simulation of Kovar-glass-silicon bonding for micromachined combustor

Xue Chuan Shan, Ying Zhao, Min Miao, 2006, International Commission for Optics.

Critical Dimension Uniformity Via Real-Time Photoresist Thickness Control

Weng Khuen Ho, A. Tay, Ming Chen, 2007, IEEE Transactions on Semiconductor Manufacturing.

Investigation of Roll-to-Roll Gravure Printing for Printed Electronics with Fine Features

S. H. Chen, S. T. Pua, Z. W. Zhong, 2020 .

A Silicon-Based Micro Gas Turbine Engine for Power Generation pdf

Ryutaro Maeda, M. Wu, Xuechuan Shan, 2007, arXiv.org.

Studies of polymer deformation and recovery in micro hot embossing

X. Shan, Y. Liu, Y. Lam, 2008 .

Studies of Polymer Deformation and Recovery in Hot Embossing pdf

Y. C. Lam, Xuechuan Shan, Y. C. Liu, 2008, ArXiv.

Fabrication of Movable Mirror-Array Structure Using Hot-Embossing for Optical Switch Applications

Ryutaro Maeda, Xue Chuan Shan, Tsuyoshi Ikehara, 2004 .

Micro- and nano- patterning using imprinting technique

X. Shan, S. Ng, Yaofeng Sun, 2006 .

Diamond micro engraving of gravure roller mould for roll-to-roll printing of fine line electronics

Kui Liu, Xinquan Zhang, Xuechuan Shan, 2015 .

Hot embossing characteristics of PEEK compared to PC and PMMA

X. Shan, Y. Murakoshi, T. Shimizu, 2003, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2003..