Andreas Theodorakakos

发表

Effect of nozzle geometry on the numerical prediction of water-mist spray formation

Gianpietro Cossali, Simona Tonini, Manolis Gavaises, 2011 .

Structure of high-pressure diesel sprays

C. Arcoumanis, Manolis Gavaises, Andreas Theodorakakos, 2001 .

Effect of time varying in-cylinder thermodynamic conditions on the development of multiple injection diesel sprays

Gianpietro Cossali, Simona Tonini, Manolis Gavaises, 2008 .

Modelling of internal and near-nozzle flow of a pintle-type outwards-opening gasoline piezo-injector

Simona Tonini, Manolis Gavaises, Andreas Theodorakakos, 2006 .

Simulation of heating effects caused by extreme fuel pressurisation in cavitating flows through Diesel fuel injectors

Andreas Theodorakakos, Nicholas Mitroglou, E. Gavaises, 2012, CAV 2012.

Three-dimensional numerical investigation of a droplet impinging normally onto a wall film

Nikos Nikolopoulos, Andreas Theodorakakos, George Bergeles, 2007, J. Comput. Phys..

Numerical investigation on the evaporation of droplets depositing on heated surfaces at low Weber numbers

Manolis Gavaises, Andreas Theodorakakos, George Bergeles, 2008 .

Pore scale 3D modelling of heat and mass transfer in the gas diffusion layer and cathode channel of a PEM fuel cell

D. Bouris, Manolis Gavaises, Andreas Theodorakakos, 2011 .

The Influence of Variable Fuel Properties in High-Pressure Diesel Injectors

E. Giannadakis, Manolis Gavaises, Andreas Theodorakakos, 2009 .

Modeling wall impaction of diesel sprays

Manolis Gavaises, Andreas Theodorakakos, George Bergeles, 1996 .

Numerical investigation of the free surface in a continuous steel casting mold model

Andreas Theodorakakos, G. A. Panaras, G. Berggeles, 1998 .

Simulation of sharp gas–liquid interface using VOF method and adaptive grid local refinement around the interface

Andreas Theodorakakos, George Bergeles, A. Theodorakakos, 2004 .

Normal impingement of a droplet onto a wall film: a numerical investigation

Nikos Nikolopoulos, Andreas Theodorakakos, George Bergeles, 2005 .

Characterization of string cavitation in large-scale Diesel nozzles with tapered holes

Manolis Gavaises, Andreas Theodorakakos, Nicholas Mitroglou, 2009 .

Modelling of high-pressure dense diesel sprays with adaptive local grid refinement

Simona Tonini, Manolis Gavaises, Andreas Theodorakakos, 2008 .

Nozzle Flow and Spray Characteristics from VCO Diesel Injector Nozzles

Manolis Gavaises, Andreas Theodorakakos, M. Gavaises, 2004 .

Multi-component fuel vaporization modelling and its effect on spray development in gasoline direct injection engines

Simona Tonini, Manolis Gavaises, Andreas Theodorakakos, 2007 .

Effect of dwell-time on multi-component fuel vaporisation of high-pressure Diesel sprays injected from cylindrical and reverse tapered multi-hole nozzles

Marco Marengo, Gianpietro Cossali, Simona Tonini, 2007 .

Evaluation of the Effect of Droplet Collisions on Spray Mixing

Manolis Gavaises, Andreas Theodorakakos, Günter Brenn, 1996 .

A numerical investigation of the evaporation process of a liquid droplet impinging onto a hot substrate

Nikos Nikolopoulos, Andreas Theodorakakos, George Bergeles, 2007 .

An Adjoint Method for Hole Cavitating Control Through Inverse Nozzle Design

Manolis Gavaises, Andreas Theodorakakos, S. Petropoulou, 2006 .

3D numerical simulation of flow and conjugate heat transfer through a pore scale model of high porosity open cell metal foam

D. Bouris, Andreas Theodorakakos, E. Gavaises, 2010 .

Non-dimensionalisation parameters for predicting the cooling effectiveness of droplets impinging on moderate temperature solid surfaces

Nikos Nikolopoulos, Manolis Gavaises, Andreas Theodorakakos, 2011 .

Flow Patterns at Stented Coronary Bifurcations: Computational Fluid Dynamics Analysis

Manolis Gavaises, Nicos Karcanias, Andreas Theodorakakos, 2012, Circulation. Cardiovascular interventions.

Link Between Cavitation Development and Erosion Damage in Diesel Injector Nozzles

E. Giannadakis, Manolis Gavaises, Andreas Theodorakakos, 2007 .