X. Nie

发表

Surface Nanocrystallization and Amorphization of Dual-Phase TC11 Titanium Alloys under Laser Induced Ultrahigh Strain-Rate Plastic Deformation

S. Luo, Liucheng Zhou, Xuede Wang, 2018, Materials.

Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening

S. Luo, Liucheng Zhou, X. Nie, 2018, Journal of Alloys and Compounds.

Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance

Qipeng Li, Weifeng He, Xiangfan Nie, 2014 .

Fatigue strength improvement in Ti-6Al-4V subjected to foreign object damage by combined treatment of laser shock peening and shot peening

S. Luo, Liucheng Zhou, X. Nie, 2021, International Journal of Fatigue.

Formation Mechanism and Control Method of Residual Stress Profile by Laser Shock Peening in Thin Titanium Alloy Component

X. Nie, Weifeng He, Haonian Wu, 2021, Materials.

High Cycle Fatigue Performance in Laser Shock Peened TC4 Titanium Alloys Subjected to Foreign Object Damage

S. Luo, Liucheng Zhou, X. Nie, 2018, Journal of Materials Engineering and Performance.

Optimization and fracture mechanism analysis of TC17 titanium alloy simulated-blade with two-sided laser shock processing

X. Nie, W. He, L. Zhou, 2014 .

The strengthening mechanism of a nickel-based alloy after laser shock processing at high temperatures

Weifeng He, Bo Wang, Xiangfan Nie, 2013, Science and technology of advanced materials.

The effect of cyclic loading on the creep fatigue life and creep strength of a DS superalloy: Damage mechanism and life modeling

X. Nie, Weifeng He, Guolei Miao, 2020 .

Effect of the Variation of Film Thickness on the Properties of Multilayered Si-Doped Diamond-Like Carbon Films Deposited on SUS 304, Al and Cu Substrates

X. Nie, Guangan Zhang, Qingchun Chen, 2020, Journal of Materials Engineering and Performance.

Thermomechanical fatigue behavior and lifetime modeling of Powder metallurgy superalloy considering phase angle effect

X. Nie, Jie Shen, Yun Jiang, 2022, International Journal of Fatigue.

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

Liucheng Zhou, X. Nie, Weifeng He, 2022, Materials.

Tuning pulse frequency for improvement in the corrosion resistance of 304SS pipes inner DLC coatings deposited by hollow cathode PECVD

X. Nie, Guangan Zhang, Zhibin Lu, 2021 .

Tribological performance of a novel wide-temperature applicable a-C/(WC/a-C) film against M50 steel

X. Nie, Weifeng He, Guangan Zhang, 2020 .

Tribological performance of GLC, WC/GLC and TiN films on the carburized M50NiL steel

X. Nie, Weifeng He, B. Liao, 2019, Surface and Coatings Technology.

Simulation and Experimental Study on Residual Stress Distribution in Titanium Alloy Treated by Laser Shock Peening with Flat-Top and Gaussian Laser Beams

S. Luo, X. Nie, Weifeng He, 2019, Materials.

Fatigue Resistance Improvement on Double-Sided Welded Joints of a Titanium Alloy Treated by Laser Shock Peening

X. Nie, Yun Jiang, X. Teng, 2022, Journal of Materials Engineering and Performance.

Surface nanocrystallization of metallic alloys with different stacking fault energy induced by laser shock processing

X. Nie, Yong Li, G. He, 2016 .

Laser shock peening induced surface nanocrystallization and martensite transformation in austenitic stainless steel

S. Luo, Liucheng Zhou, X. Nie, 2016 .

Deposition of DLC films on the inner wall of U-type pipes by hollow cathode PECVD

X. Nie, Guangan Zhang, Zhibin Lu, 2021 .

Tribology performance of laser-peened MB8 magnesium alloy under different working conditions

X. Nie, Le Tian, Li Yan, 2021, The International Journal of Advanced Manufacturing Technology.

Effect study and application to improve high cycle fatigue resistance of TC11 titanium alloy by laser shock peening with multiple impacts

Weifeng He, Xiangfan Nie, Xuede Wang, 2014 .

The tribological properties of DLC/SiC and DLC/Si3N4 under different relative humidity: The transition from abrasive wear to tribo-chemical reaction

W. Yue, X. Nie, Xueqiang Cao, 2020 .

Effect of off-axis angle on mesoscale deformation and failure behavior of plain-woven C/SiC composites with digital image correlation

X. Nie, Yun Jiang, X. Teng, 2022, Journal of the European Ceramic Society.

Thermomechanical fatigue of round tube specimens manufactured by precision directional solidification casting method

X. Nie, Jie Shen, Yun Jiang, 2022, Fatigue & Fracture of Engineering Materials & Structures.

Thermomechanical fatigue and life prediction method of a precision cast superalloy with electrical discharge machining drilled holes

X. Nie, Yun Jiang, Xing Song, 2022, International Journal of Fatigue.

Thermal stability study of TC11 titanium alloy thin component after surface nanocrystallization induced by laser shock processing

S. Luo, X. Nie, Yuyuan Tang, 2022, AIP Advances.

Experimental study and fatigue life prediction on high cycle fatigue performance of laser-peened TC4 titanium alloy

X. Nie, Zhicong Pang, Zhenyan Cao, 2021, Materials Science and Engineering: A.

Inertia-Based Identification of Elastic Anisotropic Properties for Materials Undergoing Dynamic Loadings Using the Virtual Fields Method and Heterogeneous Impact Tests

X. Nie, Jiawei Fu, L. Qi, 2021, Materials & Design.

Altering the wetting properties of orthopaedic titanium alloy (Ti–6Al–7Nb) using laser shock peening

Jonathan Lawrence, S. Prabhakaran, Soheil Nakhodchi, 2019, Journal of Alloys and Compounds.

Probing the tribological performances of hydrogenated amorphous carbon film in methane atmosphere based on Hertzian elastic contact model

X. Nie, Q. Xue, L. Shang, 2021 .

Deforming TC6 titanium alloys at ultrahigh strain rates during multiple laser shock peening

Liucheng Zhou, X. Nie, Z. An, 2013 .

The compound process of laser shock peening and vibratory finishing and its effect on fatigue strength of Ti-3.5Mo-6.5Al-1.5Zr-0.25Si titanium alloy

S. Luo, Liucheng Zhou, X. Nie, 2019, Journal of Alloys and Compounds.

Study on the Effects of Multiple Laser Shock Peening Treatments on the Electrochemical Corrosion Performance of Welded 316L Stainless Steel Joints

Liucheng Zhou, X. Nie, Yuqin Li, 2022, Metals.

Experiment investigation on microstructure and mechanical properties of TC17 titanium alloy treated by laser shock peening with different laser fluence

X. Nie, Qipeng Li, N. Long, 2013 .

Thermostablity Study on Microstructure and Microhardness of Laser Shock Processed Ti-6Al-2.5Mo-1.5Cr-0.5Fe-0.3Si

Yu Qin Li, X. Nie, Li Zhou, 2011 .

A Study of the Microstructure and Hardness of Ti-5Al-2Sn-2Zr-4Mo-4Cr by Laser Shock Peening

Wei Feng He, Yu Qin Li, Rui Jun Liu, 2011 .

The Effect on the Surface of Ti-5Al-2Sn-2Zr-4Mo-4Cr by Laser Shock Peening

X. Nie, Qi Peng Li, N. Long, 2011 .

A VFM-based identification method for the dynamic anisotropic plasticity of sheet metals

X. Nie, Jiawei Fu, L. Qi, 2022, International Journal of Mechanical Sciences.

Denoising Method for Weak Velocity Test Signals Under Laser-Induced Shock Waves Based on Attention-Guided Multi-Scale Convolutional Neural Network

X. Nie, Haonian Wu, Yuyuan Tang, 2023, SSRN Electronic Journal.

Experimental study on the pressure characteristics of laser-induced shock waves under different energy distribution

X. Nie, Haonian Wu, Yuyuan Tang, 2023, Physica Scripta.

Delamination and Dynamic Response Characteristics of CFRP Laminate Under Laser Shock

X. Nie, Haonian Wu, Yuyuan Tang, 2024, Journal of Materials Engineering and Performance.

Titanium Alloy Materials with Very High Cycle Fatigue: A Review

X. Nie, Haitao Ma, M. Shang, 2024, Materials.

Recognition and detection of aero-engine blade damage based on Improved Cascade Mask R-CNN.

S. Luo, X. Nie, Yiwen Li, 2021, Applied optics.