A. Edidin

发表

Miniature specimen shear punch test for UHMWPE used in total joint replacements.

S. M. Kurt, C. Jewett, J. Bergström, 2002, Biomaterials.

Degradation of mechanical behavior in UHMWPE after natural and accelerated aging.

C. Jewett, A. Edidin, S. Kurtz, 2000, Biomaterials.

Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty.

A. Edidin, S. Kurtz, O. Muratoglu, 1999, Biomaterials.

The Basic Tools and Terminology of Spine Treatment

A. Edidin, S. Kurtz, 2006 .

Interlaboratory validation of oxidation-index measurement methods for UHMWPE after long-term shelf aging.

F. Shen, A. Edidin, S. Kurtz, 2002, Journal of biomedical materials research.

Plasticity-induced damage layer is a precursor to wear in radiation-cross-linked UHMWPE acetabular components for total hip replacement. Ultra-high-molecular-weight polyethylene.

C. Jewett, A. Edidin, S. Kurtz, 1999, The Journal of arthroplasty.

The role of backside polishing, cup angle, and polyethylene thickness on the contact stresses in metal-backed acetabular components.

D. Bartel, A. Edidin, S. Kurtz, 1997, Journal of biomechanics.

Static and fatigue mechanical behavior of bone cement with elevated barium sulfate content for treatment of vertebral compression fractures.

S M Kurtz, K Zhao, A. Edidin, 2005, Biomaterials.

A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement.

S M Kurtz, C. Jewett, J. Foulds, 2001, Biomaterials.

A miniature specimen mechanical testing technique scaled to articulating surface of polyethylene components for total joint arthroplasty.

C. Jewett, J. Foulds, A. Edidin, 1999, Journal of biomedical materials research.

2006 Otto Aufranc Award Paper: significance of in vivo degradation for polyethylene in total hip arthroplasty.

V. Goldberg, A. Edidin, S. Kurtz, 2006, Clinical orthopaedics and related research.

Constitutive modeling of ultra-high molecular weight polyethylene under large-deformation and cyclic loading conditions.

S M Kurtz, A. Edidin, S. Kurtz, 2002, Biomaterials.

The relationship between the clinical performance and large deformation mechanical behavior of retrieved UHMWPE tibial inserts.

V. Goldberg, C. Jewett, A. Edidin, 2000, Biomaterials.

In vivo degradation of polyethylene liners after gamma sterilization in air.

V. Goldberg, A. Edidin, S. Kurtz, 2005, The Journal of bone and joint surgery. American volume.

Assessment of Surface Roughness and Waviness Using White Light Interferometry for Short-Term Implanted, Highly Crosslinked Acetabular Components

A. Edidin, S. Kurtz, C. Rimnac, 2004 .

Deconvolution of surface topology for quantification of initial wear in highly cross-linked acetabular components for THA.

A. Edidin, S. Kurtz, J. Turner, 2002, Journal of biomedical materials research.

Surface morphology and wear mechanisms of four clinically relevant biomaterials after hip simulator testing.

A. Edidin, S. Kurtz, C. Muhlstein, 2000, Journal of biomedical materials research.

Influence of mechanical behavior on the wear of 4 clinically relevant polymeric biomaterials in a hip simulator.

A. Edidin, S. Kurtz, 2000, The Journal of arthroplasty.

Thermomechanical behavior of virgin and highly crosslinked ultra-high molecular weight polyethylene used in total joint replacements.

J. Bergström, A. Edidin, S. Kurtz, 2002, Biomaterials.

Validation of a small punch testing technique to characterize the mechanical behaviour of ultra-high-molecular-weight polyethylene.

C. Jewett, J. Foulds, A. Edidin, 1997, Biomaterials.

Mechanics of bone/PMMA composite structures: an in vitro study of human vertebrae.

Amos Race, A. Edidin, A. Race, 2007, Journal of biomechanics.

The yielding, plastic flow, and fracture behavior of ultra-high molecular weight polyethylene used in total joint replacements.

C. Jewett, A. Edidin, S. Kurtz, 1998, Biomaterials.

Mechanical behavior, wear surface morphology, and clinical performance of UHMWPE acetabular components after 10 years of implantation

Clare M. Rimnac, Victor M. Goldberg, V. Goldberg, 2001 .

Development and Validation of the Small Punch Test for Uhmwpe Used in Total Joint Replacements

A. Edidin, S. Kurtz, 2000, Materials: Book of Abstracts.

Validation of a micro-CT technique for measuring volumetric wear in retrieved acetabular liners.

A. Edidin, S. Kurtz, A. Bowden, 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

Life expectancy following diagnosis of a vertebral compression fracture

A. Edidin, S. Kurtz, A. Edidin, 2011, Osteoporosis International.

Multiaxial fatigue behavior of conventional and highly crosslinked UHMWPE during cyclic small punch testing.

A. Edidin, S. Kurtz, M. Villarraga, 2003, Journal of biomedical materials research. Part A.

Accelerated aging studies of UHMWPE. I. Effect of resin, processing, and radiation environment on resistance to mechanical degradation.

S M Kurtz, A. Edidin, S. Kurtz, 2002, Journal of biomedical materials research.

Chapter 32 – Development and Application of the Small Punch Test to UHMWPE

A. Edidin, 2009 .

Chapter 13 – Development and Application of the Small Punch Test to UHMWPE

A. Edidin, 2004 .

Development and Application of the Small Punch Test to UHMWPE

A. Edidin, 2004 .

Evolution of morphology in UHMWPE following accelerated aging: the effect of heating rates.

A. Edidin, S. Kurtz, L. Pruitt, 1999, Journal of biomedical materials research.

Accelerated aging studies of UHMWPE. II. Virgin UHMWPE is not immune to oxidative degradation.

S M Kurtz, A. Edidin, S. Kurtz, 2002, Journal of biomedical materials research.

Radiation and chemical crosslinking promote strain hardening behavior and molecular alignment in ultra high molecular weight polyethylene during multi-axial loading conditions.

C. Jewett, J. Foulds, A. Edidin, 1999, Biomaterials.

Multiaxial Fatigue Behavior of Oxidized and Unoxidized UHMWPE During Cyclic Small Punch Testing at Body Temperature

A. Edidin, S. Kurtz, M. Villarraga, 2004 .

The wear of oriented UHMWPE under isotropically rough and scratched counterface test conditions.

A. Edidin, S. Kurtz, J. Fisher, 2001, Bio-medical materials and engineering.

The use of white light interferometry to characterize wear in short term retrieved highly crosslinked UHMWPE liners

Steven M. Kurtz, Joseph Turner, M. P. Herr, 2002, Proceedings of the IEEE 28th Annual Northeast Bioengineering Conference (IEEE Cat. No.02CH37342).