M. Stone

发表

Experimental and Theoretical Study of the Contact Mechanics of Five Total Knee Joint Replacements

Z. Jin, J. Fisher, T. Stewart, 1995, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Comparison of wear in a total knee replacement under different kinematic conditions

J. Fisher, D. Auger, M. Stone, 2001, Journal of materials science. Materials in medicine.

A comparison of the wear and debris generation of GUR 1120 (compression moulded) and GUR 4150HP (ram extruded) ultra high molecular weight polyethylene.

B. Wroblewski, J. Fisher, M. Stone, 1999, Bio-medical materials and engineering.

Investigation of wear of knee prostheses in a new displacement/force-controlled simulator

J. Fisher, D. Auger, M. Stone, 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear, Debris, and Biologic Activity of Cross-linked Polyethylene in the Knee: Benefits and Potential Concerns

J. Fisher, M. Stone, E. Ingham, 2004, Clinical orthopaedics and related research.

The influence of design, materials and kinematics on the in vitro wear of total knee replacements.

C. J. Bell, J. Fisher, D. Auger, 2005, Journal of biomechanics.

Comparison of wear, wear debris and functional biological activity of moderately crosslinked and non-crosslinked polyethylenes in hip prostheses

J. Fisher, M. Stone, E. Ingham, 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Quantitative analysis of polyethylene wear debris, wear rate and head damage in retrieved Charnley hip prostheses

B. Wroblewski, J. Fisher, M. Stone, 2000, Journal of materials science. Materials in medicine.

Effect of size and dose on bone resorption activity of macrophages by in vitro clinically relevant ultra high molecular weight polyethylene particles.

J. Fisher, M. Stone, E. Ingham, 2000, Journal of biomedical materials research.

Identification of nanometre-sized ultra-high molecular weight polyethylene wear particles in samples retrieved in vivo.

J. Fisher, M. Stone, E. Ingham, 2008, The Journal of bone and joint surgery. British volume.

Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator

J. Fisher, M. Stone, E. Ingham, 2001 .

An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads

J. Fisher, T. Stewart, M. Stone, 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A Review of Symptomatic Leg Length Inequality following Total Hip Arthroplasty

T. Stewart, M. Stone, A. Redmond, 2013, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Sequential mechanical and pharmacological thromboprophylaxis in the surgery of hip fractures

M. Stone, A. Furlong, D. Limb, 1997, International Orthopaedics.

Revision surgery for leg length inequality after primary hip replacement

M. Stone, A. McWilliams, A. Lampropoulos, 2018, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Length inequality after total hip replacement DIAGNOSIS OF SYMPTOMATIC LLI FOLLOWING TOTAL HIP REPLACEMENT

T. Stewart, M. Stone, A. Redmond, 2013 .

Assessing Reproducibility for Radiographic Measurement of Leg Length Inequality after Total Hip Replacement

T. Stewart, M. Stone, A. Redmond, 2011, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Wear of crosslinked polyethylene under different tribological conditions

Zhongmin Jin, John Fisher, Eileen Ingham, 2006, Journal of materials science. Materials in medicine.

Wear of fixed bearing and rotating platform mobile bearing knees subjected to high levels of internal and external tibial rotation

D D Auger, J Fisher, A A Goldsmith, 2001, Journal of materials science. Materials in medicine.

Quantitative analysis of the wear and wear debris from low and high carbon content cobalt chrome alloys used in metal on metal total hip replacements

J. Fisher, M. Stone, E. Ingham, 1999, Journal of materials science. Materials in medicine.

Modeling of damage to articulating surfaces by third body particles in total joint replacements

J. Fisher, M. Stone, D. Barton, 2000, Journal of materials science. Materials in medicine.

Isolation and characterization of UHMWPE wear particles down to ten nanometers in size from in vitro hip and knee joint simulators.

J. Fisher, M. Stone, E. Ingham, 2006, Journal of biomedical materials research. Part A.

Some factors affecting the strength of the cement-metal interface.

M H Stone, M. Stone, R Wilkinson, 1989, The Journal of bone and joint surgery. British volume.

Comparative study of the activity of total hip arthroplasty patients and normal subjects.

D Dowson, A A Goldsmith, B M Wroblewski, 2001, The Journal of arthroplasty.

Influence of simulator kinematics on the wear of metal-on-metal hip prostheses

J. Fisher, M. Stone, E. Ingham, 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Towards UK poSt Arthroplasty Follow-up rEcommendations (UK SAFE): protocol for an evaluation of the requirements for arthroplasty follow-up, and the production of consensus-based recommendations

M. Stone, R. West, N. Arden, 2017, BMJ Open.

The effect of hyaluronic acid and phospholipid based lubricants on friction within a human cartilage damage model.

J. Fisher, M. Stone, E. Ingham, 2006, Biomaterials.

Reliability of slice-encoding for metal artefact correction (SEMAC) MRI to identify prosthesis loosening in patients with painful total hip arthroplasty – a single centre, prospective, surgical validation study

M. Stone, A. Redmond, H. Pandit, 2022, The British journal of radiology.

Production of TNF-alpha and bone resorbing activity by macrophages in response to different types of bone cement particles.

J. Fisher, M. Stone, E. Ingham, 2000, Biomaterials.

Comparison of the response of human peripheral blood mononuclear cells to challenge with particles of three bone cements in vitro.

J. Fisher, M. Stone, E. Ingham, 2003, Biomaterials.

The impact of surgeon handedness in total hip replacement.

T. Stewart, M. Stone, A. Redmond, 2014, Annals of the Royal College of Surgeons of England.

Revision hip surgery in the elderly: is it worthwhile?

M. Stone, M. Andrews, G. Radcliffe, 1999, The Journal of arthroplasty.

A comparison of intermittent calf compression and enoxaparin for thromboprophylaxis in total hip replacement

M. Stone, D. Limb, D. Stead, 1997, International Orthopaedics.

Is a questionnaire and radiograph-based follow-up model for patients with primary hip and knee arthroplasty a viable alternative to traditional regular outpatient follow-up clinic?

M. Stone, B. Dube, S. Kingsbury, 2016, The bone & joint journal.

Comparison of the cytotoxicity of clinically relevant cobalt-chromium and alumina ceramic wear particles in vitro.

J Fisher, E Ingham, M H Stone, 2003, Biomaterials.

Comparative wear under different conditions of surface-engineered metal-on-metal bearings for total hip arthroplasty.

J. Fisher, M. Stone, E. Ingham, 2004, The Journal of arthroplasty.

Accelerated fracture union in association with severe head injury.

M. Stone, R. Newman, S. Mukherjee, 1987, Injury.

Quantification of third-body damage and its effect on UHMWPE wear with different types of femoral head.

J Fisher, E Ingham, B M Wroblewski, 1998, The Journal of bone and joint surgery. British volume.

Leg length inequality following total hip replacement

T. Stewart, M. Stone, A. Redmond, 2011 .

Hip Contact Forces in Asymptomatic Total Hip Replacement Patients 31 Differ from Normal Healthy Individuals : Implications for Preclinical

M. Stone, 2019 .

Hip stem fatigue: : The implications of increasing patient mass

T. Stewart, M. Stone, Ashley P Westerman, 2018, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking

J. Fisher, T. Stewart, M. Stone, 2015, Clinical biomechanics.

Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing.

J. Fisher, T. Stewart, M. Stone, 2014, Clinical biomechanics.

Effect of swing phase load on metal-on-metal hip lubrication, friction and wear.

J. Fisher, M. Stone, E. Ingham, 2006, Journal of biomechanics.

Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation

J Fisher, M Butterfield, E Ingham, 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A hip joint simulator study using new and physiologically scratched femoral heads with ultra-high molecular weight polyethylene acetabular cups

J Fisher, P S Barbour, M H Stone, 2000, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear and biological activity of highly crosslinked polyethylene in the hip under low serum protein concentrations

J Fisher, E Ingham, M H Stone, 2007, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Polyethylene particles of a 'critical size' are necessary for the induction of cytokines by macrophages in vitro.

J Fisher, E Ingham, B M Wroblewski, 1998, Biomaterials.

A novel method for the prediction of functional biological activity of polyethylene wear debris

J. Fisher, M. Stone, E. Ingham, 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

In vitro analysis of the wear, wear debris and biological activity of surface-engineered coatings for use in metal-on-metal total hip replacements

J. Fisher, M. Stone, E. Ingham, 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Evaluation of the response of primary human peripheral blood mononuclear phagocytes to challenge with in vitro generated clinically relevant UHMWPE particles of known size and dose.

B. Wroblewski, J. Fisher, M. Stone, 2000, Journal of biomedical materials research.

Influence of gelatin and bovine serum lubricants on ultra-high molecular weight polyethylene wear debris generated in in vitro simulations

B. Wroblewski, J. Fisher, M. Stone, 2000, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Hip surgeons and leg length inequality after primary hip replacement

T. Stewart, M. Stone, A. Redmond, 2018, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Iliopsoas tendonitis caused by overhang of a collared femoral prosthesis.

M. Stone, C. Brew, I. Stockley, 2011, The Journal of arthroplasty.

PRESIDENTIAL GUEST LECTURE: Tribology of Alternative Bearings

Zhongmin Jin, John Fisher, Eileen Ingham, 2006, Clinical orthopaedics and related research.

A new method of treatment for periprosthetic supracondylar fractures of the femur for prostheses with a stemmed femoral component.

M. Stone, N. Oxborrow, 1997, The Journal of arthroplasty.

The influence of molecular weight, crosslinking and counterface roughness on TNF-alpha production by macrophages in response to ultra high molecular weight polyethylene particles.

J. Fisher, M. Stone, E. Ingham, 2004, Biomaterials.

Comparison of the response of primary human peripheral blood mononuclear phagocytes from different donors to challenge with model polyethylene particles of known size and dose.

B. Wroblewski, J. Fisher, M. Stone, 2000, Biomaterials.

Quantitative comparison of wear debris from UHMWPE that has and has not been sterilised by gamma irradiation.

J Fisher, E Ingham, B M Wroblewski, 1998, The Journal of bone and joint surgery. British volume.

Reduction of postoperative blood loss after press-fit condylar knee arthroplasty with use of a femoral intramedullary plug.

B. Wroblewski, M. Stone, V. Raut, 1993, The Journal of bone and joint surgery. American volume.

Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator.

J Fisher, E Ingham, M H Stone, 2001, Bio-medical materials and engineering.

Comparison of wear of ultra-high molecular weight polyethylene acetabular cups against surface-engineered femoral heads

J. Fisher, M. Stone, E. Ingham, 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Comparative wear and wear debris under three different counterface conditions of crosslinked and non-crosslinked ultra high molecular weight polyethylene.

J. Fisher, M. Stone, E. Ingham, 2001, Bio-medical materials and engineering.

Rupture of muscle belly of the extensor carpi radialis longus.

M. Stone, J. Southgate, 1992, Injury.

The influence of phospholipid concentration in protein-containing lubricants on the wear of ultra-high molecular weight polyethylene in artificial hip joints

J. Fisher, M. Stone, E. Ingham, 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

An experimental model of tibial counterface polyethylene wear in mobile bearing knees: the influence of design and kinematics.

J. Fisher, D. Auger, M. Stone, 1999, Bio-medical materials and engineering.

A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates

J Fisher, P S Barbour, M H Stone, 1999, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Comparison of the biological activity of grade GUR 1120 and GUR 415HP UHMWPE wear debris.

J. Fisher, M. Stone, E. Ingham, 2002, Bio-medical materials and engineering.

Comparison of the response of primary murine peritoneal macrophages and the U937 human histiocytic cell line to challenge with in vitro generated clinically relevant UHMWPE particles.

B. Wroblewski, J. Fisher, M. Stone, 2000, Bio-medical materials and engineering.

Bulk autograft for a deficient acetabulum in Charnley low-friction arthroplasty. A 2-9-year follow-up study.

B. Wroblewski, P. Siney, M. Stone, 1994, The Journal of arthroplasty.

Pain relief management following proximal femoral fractures: Options, issues and controversies.

M. Stone, P. Giannoudis, T. Tosounidis, 2015, Injury.

A retrieval study of capital hip prostheses with titanium alloy femoral stems.

J. Fisher, M. Stone, E. Ingham, 2001, The Journal of bone and joint surgery. British volume.

Alternative bearing couples in total hip replacements: Solutions for young patients.

J. Fisher, M. Stone, E. Ingham, 2003, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

The influence of femoral condylar lift-off on the wear of artificial knee joints

R. Komistek, J. Fisher, M. Stone, 2007, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

i) Wear of polyethylene in artificial knee joints

C. J. Bell, J. Fisher, T. Stewart, 2001 .

Wear of surface engineered metal-on-metal hip prostheses

J Fisher, E Ingham, M H Stone, 2004, Journal of materials science. Materials in medicine.

A comparative study of patients presenting for planned and unplanned revision hip or knee arthroplasty

M. Stone, S. Kingsbury, P. Conaghan, 2022, The bone & joint journal.

Quantitative characterization of polyethylene debris isolated from periprosthetic tissue in early failure knee implants and early and late failure Charnley hip implants.

J. Fisher, M. Stone, P. Barnett, 2001, Journal of biomedical materials research.

Long-term results of a total knee prosthesis utilising an all polyethylene tibial component

T. Stewart, M. Stone, G. Whitwell, 2013, Archives of Orthopaedic and Trauma Surgery.

Metal-on-metal bearing wear with different swing phase loads.

John Fisher, Eileen Ingham, Sophie Williams, 2004, Journal of biomedical materials research. Part B, Applied biomaterials.

Ultra-High Molecular Weight Polyethylene Wear Debris Generated in Vivo and in Laboratory Tests; the Influence of Counterface Roughness

J Fisher, E Ingham, B M Wroblewski, 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

The influence of lubricant on the morphology of ultra-high molecular weight polyethylene wear debris generated in laboratory tests

J. Fisher, M. Stone, E. Ingham, 1999, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Urinary retention after total hip replacement. A prospective study.

M. Stone, P. Staniforth, N. Waterhouse, 1987, The Journal of bone and joint surgery. British volume.

Periprosthetic fracture of a total hip replacement presenting with isolated knee pain: a case report

M. Stone, M. A. el Masry, S. Thambapillay, 2007, European Journal of Orthopaedic Surgery & Traumatology.

Influences of sterilising techniques on polyethylene wear.

J. Fisher, M. Stone, E. Ingham, 2004, The Knee.

Quantification of third body damage to the tibial counterface in mobile bearing knees

J. Fisher, D. Auger, M. Stone, 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Acetabular version and long posterior wall cup in total hip replacement.

M. Stone, P. Chandran, M. Azzabi, 2008, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

The effect of application time of two types of bone cement on the cement–bone interface strength

T. Stewart, M. Stone, Z. Dahabreh, 2015, European Journal of Orthopaedic Surgery & Traumatology.

Preliminary study of the effect of aging following irradiation on the wear of ultrahigh-molecular-weight polyethylene.

J. Fisher, D. Shaw, M. Stone, 1995, The Journal of arthroplasty.

Leg length inequality after primary total hip arthroplasty

M. Stone, H. Pandit, A. McWilliams, 2017 .

Spectral analysis of the sound produced during femoral broaching and implant insertion in uncemented total hip arthroplasty

T. Stewart, M. Stone, C. Brockett, 2013, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A novel three-dimensional tissue equivalent model to study the combined effects of cyclic mechanical strain and wear particles on the osteolytic potential of primary human macrophages in vitro

J. Fisher, M. Stone, E. Ingham, 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

2009 Knee Society Presidential Guest Lecture: Polyethylene Wear in Total Knees

John Fisher, Eileen Ingham, Louise M. Jennings, 2010, Clinical orthopaedics and related research.

Quantitative analysis of UHMWPE wear debris isolated from the periprosthetic femoral tissues from a series of Charnley total hip arthroplasties.

B. Wroblewski, J. Fisher, M. Stone, 2002, Bio-medical materials and engineering.

Comparison of the response of three human monocytic cell lines to challenge with polyethylene particles of known size and dose

B. Wroblewski, J. Fisher, M. Stone, 2001, Journal of materials science. Materials in medicine.

Comparison of wear of ultra high molecular weight polyethylene acetabular cups against alumina ceramic and chromium nitride coated femoral heads

J. Fisher, M. Stone, E. Ingham, 2005 .

The prediction of polyethylene wear rate and debris morphology produced by microscopic asperities on femoral heads

J. Fisher, M. Stone, E. Ingham, 2000, Journal of materials science. Materials in medicine.

Hip Joints, Artificial

J. Fisher, M. Stone, E. Ingham, 2006 .

Advances in simulator testing of orthopaedic joint prostheses

John Fisher, Eileen Ingham, Joanne L. Tipper, 2003 .

A study of the combined effects of shelf ageing following irradiation in air and counterface roughness on the wear of UHMWPE.

B. Wroblewski, J. Fisher, M. Stone, 1997, Bio-medical materials and engineering.

A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis.

J Fisher, E Ingham, M H Stone, 2001, Journal of biomechanics.

A study of the wear resistance of three types of clinically applied UHMWPE for total replacement hip prostheses.

J Fisher, P S Barbour, M H Stone, 1999, Biomaterials.

The Metal/Polyethylene Interface

B. Wroblewski, J. Fisher, M. Stone, 2000 .

Contact surface motion paths associated with leg length inequality following unilateral total hip replacement

T. Stewart, M. Stone, A. Redmond, 2012, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear-simulation analysis of rotating-platform mobile-bearing knees.

J. Fisher, M. Stone, E. Ingham, 2006, Orthopedics.

Prediction of plastic strains in ultra-high molecular weight polyethylene due to microscopic asperity interactions during sliding wear

J Fisher, D C Barton, M H Stone, 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear of historical polyethylenes in hip prostheses. Biomechanical success and a biological failure.

J. Fisher, M. Stone, E. Ingham, 2003, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Gout Arthropathy Following Hip Arthroplasty

M. Stone, A. Grainger, R. Ramaswamy, 2010, Geriatric orthopaedic surgery & rehabilitation.

Quantification of third-body damage and its effect on UHMWPE wear with different types of femoral head

B. Wroblewski, J. Fisher, M. Stone, 1998 .

Quantitative comparison of wear debris from UHMWPE that has and has not been sterilised by gamma irradiation

B. Wroblewski, J. Fisher, M. Stone, 1998 .

In vitro wear of unicompartmental knee replacements—the effects of kinematics and femoral condylar lift-off on a fixed bearing design

John Fisher, Louise M. Jennings, R. Farrar, 2006 .

Simulation of tibial counterface wear in mobile bearing knees with uncoated and ADLC coated surfaces.

J. Fisher, D. Auger, M. Stone, 2001, Bio-medical materials and engineering.

Acetabular version and long posterior wall cup in total hip replacement

M. Stone, P. Chandran, M. Azzabi, 2008 .

Litigation after hip and knee replacement in the National Health Service.

T. Stewart, M. Stone, A. Redmond, 2013, The bone & joint journal.

Cement particles containing radio-opacifiers stimulate pro-osteolytic cytokine production from a human monocytic cell line.

J. Fisher, M. Stone, E. Ingham, 2003, The Journal of bone and joint surgery. British volume.

Comparison of weight changes after total hip or knee arthroplasty.

M. Stone, M. Woodruff, 2001, The Journal of arthroplasty.