N. Tandon

发表

Vibration Modeling of a Rigid Rotor Supported on the Lubricated Angular Contact Ball Bearings Considering Six Degrees of Freedom and Waviness on Balls and Races

C. K. Babu, N. Tandon, R. Pandey, 2012 .

An analytical model for the prediction of the vibration response of rolling element bearings due to a localized defect

N. Tandon, A. Choudhury, 1997 .

Impact Force Based Model for Bearing Local Fault Identification

J. K. Dutt, N. Tandon, Sidra Khanam, 2015 .

Vibration Response of Rolling Element Bearings in a Rotor Bearing System to a Local Defect Under Radial Load

N. Tandon, A. Choudhury, 2006 .

Defect detection in deep groove ball bearing in presence of external vibration using envelope analysis and Duffing oscillator

N. Tandon, R. Pandey, V. Patel, 2012 .

An experimental and theoretical study on environment-friendly sound absorber sourced from nettle fibers

N. Tandon, M. Raj, S. Fatima, 2020 .

Recycled materials as a potential replacement to synthetic sound absorbers: A study on denim shoddy and waste jute fibers

Naresh Tandon, Shahab Fatima, N. Tandon, 2020 .

A study of areca nut leaf sheath fibers as a green sound-absorbing material

N. Tandon, M. Raj, S. Fatima, 2020 .

Graphene based composite grease for elastohydrodynamic lubricated point contact

N. Tandon, J. Singh, G. Anand, 2016 .

Tribological and Vibration Studies on Newly Developed Nanocomposite Greases Under Boundary Lubrication Regime

N. Tandon, J. Singh, Deepak Kumar, 2018 .

Performance of Lubricated Rolling/Sliding Concentrated Contacts With Surface Textures: A Review

N. Tandon, R. Pandey, U. Sudeep, 2015 .

Condition monitoring of electric motor ball bearings for the detection of grease contaminants

N. Tandon, G. Yadava, K. Ramakrishna, 2007 .

Comparison of vibration and acoustic measurement techniques for the condition monitoring of rolling element bearings

B. C. Nakra, N. Tandon, N. Tandon, 1992 .

A REVIEW OF CONDITION MONITORING AND FAULT DIAGNOSIS OF GEARS

Ninoslav Zuber, Rusmir Bajrić, N. Tandon, 2019 .

The effect of sound intensity measurement parameters on sound power determination

N. Tandon, 1989 .

Detection of defects in rolling element bearings by vibration monitoring

B. C. Nakra, N. Tandon, 1993 .

Tribo-Dynamics of Nanocomposite Grease Lubricated Point Contact Under Elastohydrodynamics Lubrication Regime

N. Tandon, J. Singh, Deepak Kumar, 2018, Journal of Tribology.

Friction and vibration behaviors of lubricated laser textured point contacts under reciprocating rolling motion with highlights on the used laser parameters

N. Tandon, R. Pandey, U. Sudeep, 2014 .

Rheological and Film Forming Behavior of the Developed Nanocomposite Greases Under Elastohydrodynamics Lubrication Regime

N. Tandon, J. Singh, Deepak Kumar, 2018, Journal of Tribology.

Development of an experimental set-up to measure sound absorption coefficients of porous materials

N. Tandon, M. Raj, S. Fatima, 2020 .

Fault Diagnostics and Health Monitoring of Machines Using Wireless Condition Monitoring Systems

P. Saxena, N. Tandon, 2015 .

Tribological and Vibration Studies of Textured Spur Gear Pairs under Fully Flooded and Starved Lubrication Conditions

N. Tandon, R. Pandey, D. Kalyanasundaram, 2020 .

An exploration of the performance behaviors of lubricated textured and conventional spur gearsets

N. Tandon, R. Pandey, N. Gupta, 2018, Tribology International.

Effects of surface texturing on friction and vibration behaviors of sliding lubricated concentrated point contacts under linear reciprocating motion

N. Tandon, R. Pandey, U. Sudeep, 2013 .

TECHNICAL ARTICLE practical articles in shock and vibration technology: Vibration and Acoustic Monitoring Techniques for the Detection of Defects in Rolling Element Bearings -- a Review

B. C. Nakra, N. Tandon, N. Tandon, 1992 .

Development of eco-friendly nano-greases based on vegetable oil: An exploration of the character via structure

N. Tandon, Deepak Kumar, A. Saxena, 2021, Industrial Crops and Products.

A system dynamic approach to bearing fault identification with the application of Kalman and H∞ filters

J. K. Dutt, Sidra Khanam, N. Tandon, 2016 .

Classification and detection of cavitation, particle contamination and oil starvation in journal bearing through machine learning approach using acoustic emission signals

Naresh Tandon, Surojit Poddar, N. Tandon, 2021 .

A Dynamic Model for Vibration Studies of Deep Groove Ball Bearings Considering Single and Multiple Defects in Races

V. N. Patel, N. Tandon, Raj K. Pandey, 2010 .

Dynamic modelling of spur gear pair and application of empirical mode decomposition-based statistical analysis for early detection of localized tooth defect

Anand Parey, F. Guillet, M. El Badaoui, 2006 .

A comparison of some condition monitoring techniques for the detection of defect in induction motor ball bearings

N. Tandon, G. S. Yadava, K. M. Ramakrishna, 2007 .

A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings

N. Tandon, A. Choudhury, N. Tandon, 1999 .

The application of the sound-intensity technique to defect detection in rolling-element bearings

B. C. Nakra, N. Tandon, N. Tandon, 1990 .

The effect of background noise on noise source location by the sound intensity technique

N. Tandon, 1989 .

A brief summary of sound intensity measurements and their application to noise control

N. Tandon, N. Tandon, 1989 .

Performance improvement of a radial ball bearing using a micro-groove on stationary outer race

C. K. Babu, N. Tandon, R. Pandey, 2022, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Multi-Event Excitation Force Model for Inner Race Defect in a Rolling Element Bearing

J. K. Dutt, N. Tandon, Sidra Khanam, 2016 .

Detection of Defects at Different Locations in Ball Bearings by Vibration and Shock Pulse Monitoring

N. Tandon, N. Tandon, K. S. Kumar, 2003 .

Comparisons of Tribological and Vibration Behaviors of Textured Point Contacts of Bearing Steel Lubricated With Oil and Grease Under Starved Conditions

N. Tandon, R. Pandey, U. Sudeep, 2016 .

Noise-reducing designs of machines and structures

N. Tandon, N. Tandon, 2000 .

Tribodynamic studies of textured gearsets lubricated with fresh and MoS2 blended greases

N. Tandon, R. Pandey, D. Kalyanasundaram, 2022 .

Vibration studies of lubricated textured point contacts of bearing steels due to surface topographies: Simulations and experiments

N. Tandon, R. Pandey, U. Sudeep, 2016 .

Study of Oil Starvation in Journal Bearing Using Acoustic Emission and Vibration Measurement Techniques

N. Tandon, Surojit Poddar, 2020 .

Detection of particle contamination in journal bearing using acoustic emission and vibration monitoring techniques

N. Tandon, Surojit Poddar, 2019, Tribology International.

Development of Nanocomposite Grease: Microstructure, Flow, and Tribological Studies

N. Tandon, J. Singh, D. Kumar, 2017 .

Nonlinear Vibration Analysis of an Elastic Rotor Supported on Angular Contact Ball Bearings Considering Six Degrees of Freedom and Waviness on Balls and Races

N. Tandon, Raj K. Pandey, C. K. Babu, 2014 .

Detection of journal bearing vapour cavitation using vibration and acoustic emission techniques with the aid of oil film photography

N. Tandon, Surojit Poddar, N. Tandon, 2016 .

Application of acoustic emission technique for the detection of defects in rolling element bearings

N. Tandon, A. Choudhury, N. Tandon, 2000 .

Experimental Study for Vibration Behaviors of Locally Defective Deep Groove Ball Bearings under Dynamic Radial Load

V. N. Patel, N. Tandon, Raj K. Pandey, 2014 .

A theoretical model to predict the vibration response of rolling bearings in a rotor bearing system to distributed defects under radial load

N. Tandon, A. Choudhury, N. Tandon, 2000 .

Force Analysis Due to Local Defect in Rolling Bearings for Fault Diagnosis

J. K. Dutt, Sidra Khanam, N. Tandon, 2015 .

Vibration Studies of Dynamically Loaded Deep Groove Ball Bearings in Presence of Local Defects on Races

V. N. Patel, N. Tandon, Raj K. Pandey, 2013 .

A Theoretical Model to Predict Vibration Response of Rolling Bearings to Distributed Defects Under Radial Load

N. Tandon, A. Choudhury, N. Tandon, 1998 .

2nd International Conference on Innovations in Automation and Mechatronics Engineering, ICIAME 2014 Fault size estimation in the outer race of ball bearing using discrete wavelet transform of the vibration signal

J. K. Dutt, N. Tandon, Sidra Khanam, 2014 .

A comparison of some vibration parameters for the condition monitoring of rolling element bearings

N. Tandon, N. Tandon, 1994 .

Noise Control of Portable Generator Set

B. C. Nakra, N. Tandon, N. Tandon, 1999 .

Noise control of engine driven portable generator set

B. C. Nakra, N. Tandon, D. R. Ubhe, 1998 .

Condition Monitoring of Rotary Machines

Anand Parey, N. Tandon, N. Tandon, 2006 .