Takeshi Kobayashi

发表

811 A piezoelectric MEMS switch to activate event-driven type wireless sensor node using low-frequency vibrations

Hirofumi Nogami, Takeshi Kobayashi, Hironao Okada, 2011 .

A piezoelectric cantilever-type differential pressure sensor for a low standby power trigger switch

Takeshi Kobayashi, Ryutaro Maeda, Toshihiro Itoh, 2013 .

Fabrication and Characterization of Bi-epitaxial Grain Boundary Junctions in YBa 2 Cu 3 O 7 δ

Takeshi Kobayashi, Kazuya Kinoshita, Syuuji Arisaka, 1993 .

Investigation of a MEMS piezoelectric energy harvester system with a frequency-widened-bandwidth mechanism introduced by mechanical stoppers

Chengkuo Lee, Takeshi Kobayashi, Chenggen Quan, 2012 .

A scrape-through piezoelectric MEMS energy harvester with frequency broadband and up-conversion behaviors

Chengkuo Lee, Takeshi Kobayashi, Huicong Liu, 2011 .

Ultra-Low Power Event-Driven Wireless Sensor Node Using Piezoelectric Accelerometer for Health Monitoring

Takashi Masuda, Takeshi Kobayashi, Hironao Okada, 2009 .

Passive piezoelectric DC sensor applicable to one-wire or two-wire DC electric appliances for end-use monitoring of DC power supply

Takeshi Kobayashi, Ryutaro Maeda, Toshihiro Itoh, 2012 .

On the Japanese Industrial Standard (Draft) for Removal for Finish Cut

Takeshi Kobayashi, 1966 .

A piezoelectric flow sensor for use as a wake-up switch for a wireless sensor network node

Takeshi Kobayashi, Ryutaro Maeda, Toshihiro Itoh, 2013 .

Ultra-low Power MEMS Activity Sensor for Wireless Health Monitoring System

Takashi Masuda, Hirofumi Nogami, Takeshi Kobayashi, 2014 .

Investigation of piezoelectric MEMS-based wideband energy harvesting system with assembled frequency-up-conversion mechanism

Chengkuo Lee, Takeshi Kobayashi, Chenggen Quan, 2011 .

Fabrication and Characterization of Bi-epitaxial Grain Boundary Junctions in YBa_2Cu_3O_<7δ> (Special Issue on High-Temperature Superconducting Electronics)

Takeshi Kobayashi, Kazuya Kinoshita, Syuuji Arisaka, 1993 .

Passive piezoelectric single-side MEMS DC current sensor with five parallel PZT plates applicable to two-wire DC electric appliances without using cord separator

Takeshi Kobayashi, Ryutaro Maeda, Toshihiro Itoh, 2013 .

Photovoltaic properties of ferroelectrics and their applications to optical sensor

Takeshi Kobayashi, Ryutaro Maeda, Masaaki Ichiki, 2007, SPIE Micro + Nano Materials, Devices, and Applications.

Product Quality Stabilization and Die-Life Improvement for Hot Forging Process of Crankshafts by Utilizing Measurement Tools

Takeshi Kobayashi, Takeshi Inada, Yoshikazu Nogami, 2010 .

Vacuum chucking assist sheet for fixing flexible sheets during the printing process

Takeshi Kobayashi, Hirobumi Ushijima, Ken-ichi Nomura, 2016 .

Direct Delivery of Cas9-sgRNA Ribonucleoproteins into Cells Using a Nanoneedle Array

Takeshi Kobayashi, Yuki Honda, Futoshi Iwata, 2019, Applied Sciences.

Current Status of Development of Demonstration Fast Breeder Reactor and Prospect of FBR Commercialization.

Takeshi Kobayashi, Hiroto Kawakami, Masahiro Ueta, 1995 .

Flexible Sheet Device by Weaving Functional Fibers( The 1st Symposium on Micro-Nano Engineering)

Takeshi Kobayashi, Toshihiro Itoh, Koji Miyake, 2010 .

Formation and its characteristics of PLZT layered film structure for transducers

Takeshi Nakada, Takeshi Kobayashi, Ryutaro Maeda, 2004, SPIE Micro + Nano Materials, Devices, and Applications.

Morphological Study of YBa_2Cu_3O_y Thin Films Grown by Excimer Laser Ablation Method (Special Issue on Toward Digital and Analog Applications of Superconductors)

Takeshi Kobayashi, Shingo Tomohisa, Minoru Tachiki, 1996 .

1015 Development of A MEMS DC Current Sensor for Electricity End-use Monitoring (Part III)

Takeshi Kobayashi, Ryutaro Maeda, Toshihiro Itoh, 2012 .