B. Cockeram

发表

Flexural Strength and Shear Strength of Silicon Carbide to Silicon Carbide Joints Fabricated by a Molybdenum Diffusion Bonding Technique

B. Cockeram, 2005 .

The role of stress-state on the deformation and fracture mechanism of hydrided and non-hydrided Zircaloy-4

B. Cockeram, J. Hollenbeck, 2015 .

Weldable ductile molybdenum alloy development

B. Cockeram, L. Snead, T. Byun, 2008 .

Atom probe examinations of Zircaloy irradiated at nominally 358 °C

B. Cockeram, K. Leonard, P. Edmondson, 2019, Nuclear Materials and Energy.

The fracture toughness and toughening mechanisms of nickel-base wear materials

B. Cockeram, B. V. Cockeram, 2002 .

The fracture toughness and toughening mechanisms of wrought low carbon arc cast, oxide dispersion strengthened, and molybdenum-0.5 pct titanium-0.1 pct zirconium molybdenum plate stock

B. Cockeram, 2005 .

Some observations of the influence of δ-ferrite content on the hardness, galling resistance, and fracture toughness of selected commercially available iron-based hardfacing alloys

B. Cockeram, 2002 .

Measuring the fracture toughness of molybdenum-0.5 pct titanium-0.1 pct zirconium and oxide dispersion-strengthened molybdenum alloys using standard and subsized bend specimens

B. Cockeram, 2002 .

Fracture toughness testing and toughening mechanisms of some commercial cobalt-free hardfacing alloys

B. Cockeram, 1998 .

Irradiation hardening in unalloyed and ODS molybdenum during low dose neutron irradiation at 300 °C and 600 °C

B. Cockeram, R. Smith, L. Snead, 2008 .

The role of stress state on the fracture toughness and toughening mechanisms of wrought molybdenum and molybdenum alloys

B. Cockeram, 2010 .

The Fracture Toughness and Toughening Mechanism of Commercially Available Unalloyed Molybdenum and Oxide Dispersion Strengthened Molybdenum with an Equiaxed, Large Grain Structure

B. Cockeram, 2009 .

In-Situ Fracture Studies and Modeling of the Toughening Mechanism Present in Wrought Low-Carbon Arc-Cast Molybdenum, Titanium-Zirconium-Molybdenum, and Oxide-Dispersion-Strengthened Molybdenum Flat Products

Kwai S. Chan, B. Cockeram, K. Chan, 2008 .

Isothermal and cyclic oxidation resistance of boron-modified and germanium-doped silicide coatings for titanium alloys

B. Cockeram, R. Rapp, 1996 .

The swelling, microstructure, and hardening of wrought LCAC, TZM, and ODS molybdenum following neutron irradiation

B. Cockeram, R. Smith, L. Snead, 2011 .

The increase in fatigue crack growth rates observed for Zircaloy-4 in a PWR environment

B. Cockeram, B. Kammenzind, 2018 .

The development and testing of emissivity enhancement coatings for themophotovoltaic (TPV) radiator applications

B. Cockeram, B. V. Cockeram, D. P. Measures, 1999 .

THE SPECTRAL EMITTANCE AND LONG-TERM THERMAL STABILITY OF COATINGS FOR THERMOPHOTOVOLTAIC (TPV) RADIATOR APPLICATIONS

B. Cockeram, J. Hollenbeck, B. V. Cockeram, 2002 .

In situ studies and modeling of the deformation and fracture mechanism for wrought Zircaloy-4 and Zircaloy-2 as a function of stress-state

B. Cockeram, K. Chan, B. V. Cockeram, 2013 .

The use of a laser-assisted Local Electrode Atom Probe and TEM to examine the microstructure of Zircaloy and precipitate structure following low dose neutron irradiation at nominally 358 °C

B. Cockeram, L. Snead, K. Leonard, 2013 .

Development of microstructure and irradiation hardening of Zircaloy during low dose neutron irradiation at nominally 358 °C

B. Cockeram, R. Smith, L. Snead, 2011 .

In situ studies and modeling the fracture of Zircaloy-4

B. Cockeram, K. Chan, 2009 .

The hardness, adhesion and wear resistance of coatings developed for cobalt-base alloys

B. Cockeram, W. Wilson, 2000 .

Role of Nb3Si in high temperature deformation of a cast Nb - 10 a/o Si in-situ composite

B. Cockeram, R. Srinivasan, I. Weiss, 1992 .

The kinetics of multilayered titanium-silicide coatings grown by the pack cementation method

B. Cockeram, R. Rapp, 1995 .

Preventing the accelerated low-temperature oxidation of MoSi2 (pesting) by the application of superficial alkali-salt layers

B. Cockeram, R. Rapp, G. Wang, 1996 .

Deformation and fracture properties in neutron irradiated pure Mo and Mo alloys

B. Cockeram, L. Snead, T. Byun, 2008 .

The mechanical properties and fracture mechanisms of wrought low carbon arc cast (LCAC), molybdenum–0.5pct titanium–0.1pct zirconium (TZM), and oxide dispersion strengthened (ODS) molybdenum flat products

B. Cockeram, B. V. Cockeram, 2006 .

Oxidation-resistant boron- and germanium-doped silicide coatings for refractory metals at high temperature

B. Cockeram, R. Rapp, 1995 .

Development and growth of boron-modified and germanium-doped titanium-silicide diffusion coatings by the halide-activated, pack-cementation method

B. Cockeram, R. Rapp, 1996 .

Growth and oxidation resistance of boron-modified and germanium-doped silicide diffusion coatings formed by the halide-activated pack cementation method

B. Cockeram, 1995 .

The influence of multi-layered kinetics on the selection of the primary phase during the diffusion-controlled growth of titanium-silicide layers

B. Cockeram, G. Wang, 1995 .

The effect of Nb3Si precipitates on the deformation of the primary Nb phase in Nb-10 a/o Si in-situ composite

B. Cockeram, R. Srinivasan, I. Weiss, 1992 .

Characterization of Silicide Precipitates in Primary Nb Phase in Nb-10% Si In-Situ Composites

B. Cockeram, R. Srinivasan, I. Weiss, 1991 .

Phase relationships in Nb - 18.7 a/o Si in-situ composite

B. Cockeram, R. Srinivasan, H. A. Lipsitt, 1991 .

The diffusion bonding of silicon carbide and boron carbide using refractory metals

B. Cockeram, 1999 .

Post-irradiation fracture toughness of unalloyed molybdenum, ODS molybdenum, and TZM molybdenum following irradiation at 244 °C to 507 °C

B. Cockeram, L. Snead, T. Byun, 2013 .

Development of wear-resistant coatings for cobalt-base alloys

B. Cockeram, 1999 .

The Formation and Oxidation Resistance of Boron-Modified and Germanium-Doped Silicide Diffusion Coatings for Titanium and Molybdenum

B. Cockeram, R. Rapp, B.V. Cockeram, 1997 .

Growth kinetics and pesting resistance of MoSi2 and germanium‐doped MoSi2 diffusion coatings grown by the pack cementation method

B. Cockeram, R. Rapp, G. Wang, 1995 .

The influence of fast neutron irradiation and irradiation temperature on the tensile properties of wrought LCAC and TZM molybdenum

B. Cockeram, R. Smith, L. Snead, 2005 .

Tensile properties and fracture mode of a wrought ODS molybdenum sheet following fast neutron irradiation at temperatures ranging from 300 °C to 1000 °C

Lance Lewis Snead, B. Cockeram, R. Smith, 2005 .

Hardness and electrical resistivity of molybdenum in the post-irradiated and annealed conditions

B. Cockeram, L. Snead, J. Hollenbeck, 2005 .

The change in tensile properties of wrought LCAC molybdenum irradiated with neutrons

B. Cockeram, L. Snead, J. Hollenbeck, 2004 .

The recovery of irradiation damage for Zircaloy-2 and Zircaloy-4 following low dose neutron irradiation at nominally 358°C

B. Cockeram, L. Snead, T. Byun, 2015 .

The Role of Stress-state on the Low Cycle Fatigue Resistance of Non-hydrided Beta-treated Zircaloy-4

B. Cockeram, B. Kammenzind, 2023, Journal of Nuclear Materials.

The change in the hardness of LCAC, TZM, and ODS molybdenum in the post-irradiated and annealed conditions

B. Cockeram, R. Smith, L. Snead, 2009 .

On the Extension of the Gurson-Type Porous Plasticity Models for Prediction of Ductile Fracture under Shear-Dominated Conditions

Bryan A. Webler, Xiaosheng Gao, James C. Sobotka, 2014 .

Modeling the tension–compression asymmetric yield behavior of β-treated Zircaloy-4

B. Cockeram, B. Webler, Xiaosheng Gao, 2014 .

Preparation of TEM foils from Nb‐10 a/ Si

A. G. Jackson, B. Cockeram, R. Srinivasan, 1992, Microscopy research and technique.

Measuring the Fracture Toughness of TZM and ODS Molybdenum Alloys Using Standard and Sub-Sized Bend Specimens

B. Cockeram, 2002 .

Fracture Strength of Plate and Tubular Forms of Monolithic Silicon Carbide Produced by Chemical Vapor Deposition

B. Cockeram, Brian Vern Cockeram, 2004 .

Fracture Toughness and Flexural Strength of Chemically Vapor‐Deposited Silicon Carbide As Determined Using Chevron‐Notched and Surface Crack in Flexure Specimens

B. Cockeram, 2004 .

Observations of Solute Redistribution Obtained using Atom Probe Tomography Examinations of Bulk Zircaloy Neutron Irradiated at Nominally 410°C

B. Cockeram, B. Kammenzind, P.D. Edmondson, 2024, Journal of Nuclear Materials.