P. Wright

D. Steingart, P. Wright, J.W. Evans, 2007, Polytronic 2007 - 6th International Conference on Polymers and Adhesives in Microelectronics and Photonics.

Vibrational energy scavenging via thin film piezoelectric ceramics

Elizabeth K. Reilly, P. Wright, S. Roundy, 2004 .

Corrugated aluminum nitride energy harvesters for high energy conversion effectiveness

Albert P. Pisano, Liwei Lin, Paul K. Wright, 2011 .

Comparison between MEMS and Meso Scale Piezoelectric Energy Harvesters

P. Wright, P. Mitcheson, E. Halvorsen, 2016 .

Maximum Performance of Piezoelectric Energy Harvesters When Coupled to Interface Circuits

Igor Paprotny, Paul D. Mitcheson, Einar Halvorsen, 2016, IEEE Sensors Journal.

Coulomb-damped resonant generators using piezoelectric transduction

Paul D. Mitcheson, Einar Halvorsen, Lindsay M. Miller, 2012 .

Printed flexible thermoelectric generators for use on low levels of waste heat

James W. Evans, P. Wright, Zuo-qian Wang, 2015 .

Dispenser printed circular thermoelectric devices using Bi and Bi0.5Sb1.5Te3

Alic Chen, James W. Evans, Paul K. Wright, 2014 .

Medical Applications of Thermoelectrics

Paul K. Wright, P. Wright, A. Chen, 2012 .

Printed Se-Doped MA n-Type Bi2Te3 Thick-Film Thermoelectric Generators

Alic Chen, James W. Evans, Paul K. Wright, 2012, Journal of Electronic Materials.

Enhanced performance of dispenser printed MA n-type Bi₂Te₃ composite thermoelectric generators.

Alic Chen, Paul K. Wright, Zuoqian Wang, 2012, ACS applied materials & interfaces.

Dispenser printed composite thermoelectric thick films for thermoelectric generator applications

Alic Chen, James W. Evans, Paul K. Wright, 2011 .

Dispenser-printed planar thick-film thermoelectric energy generators

James W. Evans, P. Wright, Alic Chen, 2011 .

Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload

P. Wright, E. Leland, 2006 .

Anisotropic material properties of fused deposition modeling ABS

P. Wright, Sung-hoon Ahn, S. Roundy, 2002 .

Stress analysis in machining with the use of sapphire tools

P. Wright, A. Bagchi, 1987, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

Surface finishes from turning and facing with round nosed tools

Sangkee Min, Yasuo Yamane, Katsuhiko Sekiya, 2008 .

A SELF-POWERED MEMS SENSOR FOR AC ELECTRIC CURRENT

Peter Minor, Paul K. Wright, Christopher Sherman, 2009 .

A MEMS AC current sensor for residential and commercial electricity end-use monitoring

Paul K. Wright, Richard M. White, P. Wright, 2009 .

Energy scavenging power sources for household electrical monitoring

Paul K. Wright, Richard M. White, P. Wright, 2008 .

Energy scavenging for wireless sensor networks

Jan M. Rabaey, Paul K. Wright, Shad Roundy, 2003 .

Material Characterization of Fused Deposition Modeling (FDM) ABS by Designed Experiments

P. Wright, Sung-hoon Ahn, S. Roundy, 2001 .

Metallurgical appraisal of wear mechanisms and processes on high-speed-steel cutting tools

E. M. Trent, P. Wright, E. Trent, 1974 .

Cutting tool materials I

P. Wright, E. Trent, 2000 .

Wear mechanisms that dominate tool-life in machining

P. Wright, A. Bagchi, P. K. Wright, 1981 .

Dynamic plasticity: A comparison between results from mechanical testing and machining

P. Wright, A. Holzer, 1981 .

Transparent sapphire tools

P. Wright, 1990 .

Wireless sensors for automated control of total incombustible content (TIC) of dust deposited in underground coal mines

Igor Paprotny, John Sabino, Omid Mahdavipour, 2015, 2015 IEEE SENSORS.

Opto-Dielectrometric Sensor for Measuring Total Incombustible Content in Underground Coal Mines

Richard M. White, P. Wright, John Sabino, 2017, IEEE Sensors Journal.

Microstructural characterization of a platinum-modified diffusion aluminide bond coat for thermal barrier coatings

M. Chen, P. Wright, K. Livi, 2003 .

Microstructural evolution of platinum modified nickel aluminide bond coat during thermal cycling

P. Wright, T. Hufnagel, R. Ott, 2003 .

Evolution of a diffusion aluminide bond coat for thermal barrier coatings during thermal cycling

P. Wright, K. Hemker, Mingwei Chen, 2003 .

UC Berkeley Precision Manufacturing Group Title Surface finishes from turning and facing with round nosed tools Permalink

D. Dornfeld, P. Wright, Y. Yamane, 2008 .

Annular screen printed thermoelectric generators for ultra-low-power sensor applications

P. Wright, K. Gururangan, Z. Gima, 2016 .

Designing a thermoelectrically powered wireless sensor network for monitoring aluminium smelters

Paul K. Wright, James W. Evans, Michael Harris Schneider, 2006 .

A piezoelectric vibration based generator for wireless electronics

P. Wright, S. Roundy, 2004 .

Strip drawing: A theoretical-experimental comparison

P. Wright, O. Richmond, M. Devenpeck, 1984 .

Role of lead in free-machining brass

P. Wright, A. Wolfenden, 1979 .

Machine Design and Thermal Aspects of the Friction Welding Process

P. Wright, P. Smith, M. Kirkham, 1979 .

Micromechanical modeling of fiber/matrix interface effects in transversely loaded SiC/Ti-6-4 metal matrix composites

P. Wright, P Kennard Wright, Rp Nimmer, 1991 .

The influence of thermal-mechanical processing on residual stresses in titanium matrix composites

J. Roberts, P. Wright, M. Bourke, 1997 .

Thermal stress effects in intermetallic matrix composites

P. Wright, H. Wadley, D. Kupperman, 1993 .

Comparison of Methods

Jan M. Rabaey, Paul K. Wright, Shad Roundy, 2004 .

The Influence of Orientation on the Fatigue of Directionally Solidified Superalloys

A. F. Anderson, P. Wright, 1980 .

The high temperature creep behavior of doped tungsten wire

P. Wright, 1978 .

DISPENSER PRINTED THERMOELECTRIC ENERGY GENERATORS

M. Koplow, P. Wright, D. Madan, 2009 .

Interfacial conditions and bond strength in cold pressure welding by rolling

P. Wright, D. A. Snow, C. Tay, 1978 .

HIGH CYCLE FATIGUE IN A SINGLE CRYSTAL SUPERALLOY: TIME DEPENDENCE AT ELEVATED TEMPERATURE

D. Cameron, P. Wright, P. K. Wright, 2004 .

Measuring the Properties of Diffusion Aluminide Bond Coat Layers with Microsample Tensile Testing

P. Wright, K. Hemker, D. Pan, 2000 .

Influence of cyclic strain on life of a PVD TBC

P. Wright, P Kennard Wright, 1998 .

MEMS capacitive flow sensor for natural gas pipelines

Igor Paprotny, Paul K. Wright, Richard M. White, 2015 .

Vortex shedding induced energy harvesting from piezoelectric materials in heating, ventilation and air conditioning flows

Paul K. Wright, Martin R. Cacan, Lee A. Weinstein, 2012 .

Boundary conditions at the chip-tool interface in machining: Comparisons between seizure and sliding friction

Paul K. Wright, D. Tabor, D. Tabor, 1979 .

Application of Multizone HVAC Control Using Wireless Sensor Networks and Actuating Vent Registers

Paul K. Wright, Andrew Redfern, William A. Watts, 2007 .

Improving power output for vibration-based energy scavengers

Jan M. Rabaey, Paul K. Wright, Brian P. Otis, 2005, IEEE Pervasive Computing.

Alternative Geometries for Increasing Power Density in Vibration Energy Scavenging for Wireless Sensor Networks

Paul K. Wright, Shad Roundy, Jessy Baker, 2005 .

Modeling, fabrication and stress compensation of an epitaxial thin film piezoelectric microscale energy scavenging device

Paul K. Wright, Elizabeth K. Reilly, P. Wright, 2009 .

A study of low level vibrations as a power source for wireless sensor nodes

Jan M. Rabaey, Paul K. Wright, Shad Roundy, 2003, Comput. Commun..

Mechanical fatigue as a mechanism of water tree propagation in TR-XLPE

Zuoqian Wang, R. O. Ritchie, R. Ritchie, 2012, IEEE Transactions on Dielectrics and Electrical Insulation.

Modeling of Interdigitated Electrodes and Supercapacitors with Porous Interdigitated Electrodes

P. Wright, M. Cowell, J. Evans, 2017 .

Cutting tool materials II

P. Wright, E. Trent, 2000 .

Energy Scavenging in Support of Ambient Intelligence: Techniques, Challenges, and Future Directions

Paul K. Wright, Brian Otis, Jan M. Rabaey, 2006 .

Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations

Jan M. Rabaey, Paul K. Wright, Shad Roundy, 2012 .

Modeling and experimental verification of low-frequency MEMS energy harvesting from ambient vibrations

Tao Dong, Einar Halvorsen, Lindsay M. Miller, 2011 .

Coupling in situ atomic force microscopy (AFM) and ultra-small-angle X-ray scattering (USAXS) to study the evolution of zinc morphology during electrodeposition within an imidazolium based ionic liquid electrolyte

P. Wright, J. Keist, J. Hammons, 2020 .

DESIGN AND FABRICATION OF PIEZOELECTRIC ALUMINUM NITRIDE CORRUGATED BEAM ENERGY HARVESTER

A. Pisano, Liwei Lin, P. Wright, 2010 .

Condition Monitoring in End-Milling Using Wireless Sensor Networks (WSNs)

Paul K. Wright, David Dornfeld, Nathan Ota, 2008 .

Micropower Materials Development for Wireless Sensor Networks

James W. Evans, Paul K. Wright, Daniel A. Steingart, 2008 .

he Electric Power Grid: oday and Tomorrow

P. Wright, S. Roundy, J. Evans, 2008 .

An in situ AFM Study of the Evolution of Surface Roughness for Zinc Electrodeposition within an Imidazolium Based Ionic Liquid Electrolyte

James W. Evans, Paul K. Wright, Christine A. Orme, 2015 .

Coupling in-situ techniques to analyze zinc deposition and dissolution for energy storage applications

D. Steingart, P. Wright, F. Ross, 2013 .

Powering Ambient Intelligent Networks

Paul K. Wright, M. Strasser, Shad Roundy, 2005, Ambient Intelligence.

Degradation of Piezoelectric Materials for Energy Harvesting Applications

Eric M. Yeatman, Andrew S. Holmes, Paul K. Wright, 2014 .

Atmospheric Sensors and Energy Harvesters on Overhead Power Lines

Paul K. Wright, Zhiwei Wu, Richard M. White, 2018, Sensors.

A STUDY OF AMBIENT VIBRATIONS FOR PIEZOELECTRIC ENERGY CONVERSION

Paul K. Wright, Lindsay M. Miller, Elizabeth K. Reilly, 2009 .

Electromagnetic energy harvester for atmospheric sensors on overhead power distribution lines

P. Wright, J. Stetter, D. Nguyen, 2018, Journal of Physics: Conference Series.

Trends in wireless sensor networks for manufacturing

Paul K. Wright, Nathan Ota, P. Wright, 2006, Int. J. Manuf. Res..

Power Sources for Wireless Sensor Networks

Jan M. Rabaey, Daniel A. Steingart, Paul K. Wright, 2004, EWSN.

Stick-On Piezoelectromagnetic AC Current Monitoring of Circuit Breaker Panels

M. Seidel, I. Paprotny, R. M. White, 2013, IEEE Sensors Journal.

Electromechanical Energy Scavenging From Current-Carrying Conductors

Qiliang Xu, I. Paprotny, Wai Wah Chan, 2013, IEEE Sensors Journal.

Chapter 12 – Modeling of metal cutting

Edward M. Trent, Paul K. Wright, P. Wright, 2000 .

Chapter 11 – High speed machining

Edward M. Trent, Paul K. Wright, P. Wright, 2000 .

High-performance dispenser printed MA p-type Bi(0.5)Sb(1.5)Te(3) flexible thermoelectric generators for powering wireless sensor networks.

P. Wright, Zuo-qian Wang, D. Madan, 2013, ACS applied materials & interfaces.

Predicting the Shear Plane Angle in Machining From Workmaterial Strain-Hardening Characteristics

Paul K. Wright, P. Wright, 1982 .

Reliability analysis of single crystal NiAl turbine blades

P. Wright, R. Noebe, D. Wheeler, 1995 .

Chapter 4 – Forces and stresses in metal cutting

Edward M. Trent, Paul K. Wright, P. Wright, 2000 .

Thin film piezoelectric energy scavenging systems for long term medical monitoring

Paul K. Wright, Elizabeth K. Reilly, Eric Carleton, 2006, International Workshop on Wearable and Implantable Body Sensor Networks (BSN'06).

Scheme for improved integration and lifetime for piezoelectric energy harvesters

Paul K. Wright, Paul D. Mitcheson, Lindsay M. Miller, 2013, 2013 IEEE SENSORS.

An Application-Driven Architecture for Residential Energy Management with Wireless Sensor Networks

Xin Yang, Paul K. Wright, Spencer Ahrens, 2006, 2006 IEEE International Conference on Mobile Ad Hoc and Sensor Systems.

A piezoelectric vibration based generator for wireless electronics

Paul K. Wright, Shadrach Roundy, P. Wright, 2004 .

The flow and fracture of unidirectional

L. J. Ebert, P. Wright, 1972 .

Multicycle Testing of Commercial Coin Cells for Buffering of Harvested Energy for the IoT

James W. Evans, Paul K. Wright, Ana C. Arias, 2021, IEEE Internet of Things Journal.

Validation and testing of a MEMS piezoelectric permanent magnet current sensor with vibration canceling

Paul K. Wright, Richard M. White, Christopher Sherman, 2016 .

A new MEMS sensor for AC electric current

Paul K. Wright, Peter Minor, Eli S. Leland, 2010, 2010 IEEE Sensors.

Design and Fabrication of a MEMS AC Electric Current Sensor

Paul K. Wright, Richard M. White, P. Wright, 2008 .

Modelling and simulation techniques for highly integrated, low-power wireless sensor networks

Alberto L. Sangiovanni-Vincentelli, Jan M. Rabaey, Paul K. Wright, 2007, IET Comput. Digit. Tech..

MEMS-based capacitive pressure sensors with pre-stressed sensing diaphragms

Igor Paprotny, Paul K. Wright, P. Wright, 2015, 2015 IEEE SENSORS.

A Wireless Sensor for Tool Temperature Measurement and its Integration within a Manufacturing System

Paul K. Wright, David Dornfeld, Nathan Ota, 2006 .

Cumulative Damage Modeling for Nickel-Based Superalloys Under Creep and Fatigue Loading

Mandar Chati, P. Wright, Mandar K. Chati, 2010 .

Integration of a low frequency, tunable MEMS piezoelectric energy harvester and a thick film micro capacitor as a power supply system for wireless sensor nodes

James W. Evans, Paul K. Wright, R. Ramesh, 2009, 2009 IEEE Energy Conversion Congress and Exposition.

Novel online RF technique for detection of water trees in underground powered distribution cables

Paul K. Wright, Igor Paprotny, A. Giovanni Gonzalez, 2011, 2011 Electrical Insulation Conference (EIC)..

Which is better, electrostatic or piezoelectric energy harvesting systems?

Paul D. Mitcheson, Einar Halvorsen, Lindsay M. Miller, 2015 .

Further results from the wireless instrumentation of Hall-Héroult cells

Daniel A. Steingart, James W. Evans, Paul K. Wright, 2006 .

A Small, Low Cost Wireless Galvanostat based on Open Source Hardware and Software

James W. Evans, Paul K. Wright, Andrew Redfern, 2006 .

Micro-Electrostatic Vibration-to-Electricity Converters

Kristofer S. J. Pister, Paul K. Wright, Shad Roundy, 2002 .

Vibration Powered Battery-Assisted Passive RFID Tag

Paul K. Wright, Andrew Redfern, Elaine Lai, 2005, EUC Workshops.

Miniature self-powered stick-on wireless sensor node for monitoring of overhead power lines

Paul K. Wright, Igor Paprotny, Rafael Send, 2013, 2013 IEEE Energy Conversion Congress and Exposition.

Powering a wireless sensor node with a vibration-driven piezoelectric energy harvester

Paul K. Wright, Fred Burghardt, Elizabeth K. Reilly, 2011 .

Jonny Galvo: A Small, Low Cost Wireless Galvanostat

Daniel A. Steingart, James W. Evans, Paul K. Wright, 2006 .

Tailoring Electrochemical Capacitor Energy Storage Using Direct Write Dispenser Printing

Daniel A. Steingart, James W. Evans, Paul K. Wright, 2008 .

A Novel Method for Electrochemically Depositing Materials in Precise Locations without Bath Exposure

D. Steingart, P. Wright, J. Evans, 2007 .

Modeling and Stencil/Screenprint Fabrication of Thick Film Lithium Polymer Ion MicroBatteries for Smart Dust Applications

D. Steingart, P. Wright, J. Evans, 2006 .

Dispenser Printed Electrochemical Capacitors for Power Management of Millimeter Scale Lithium Ion Polymer Microbatteries for Wireless Sensors

D. Steingart, P. Wright, J. Salminen, 2009 .

Experimental passive self-tuning behavior of a beam resonator with sliding proof mass

Eric M. Yeatman, Andrew S. Holmes, Einar Halvorsen, 2013 .

Thermodynamics of water treeing

Zuoqian Wang, P. Wright, J. W. Evans, 2011, IEEE Transactions on Dielectrics and Electrical Insulation.

Wireless sensor node demonstrating indoor-light energy harvesting and voltage-triggered duty cycling

James W. Evans, Paul K. Wright, M Cowell, 2016 .

Technologies for an Autonomous Wireless Home Healthcare System

Jan M. Rabaey, Lindsay Miller, Paul K. Wright, 2009, 2009 Sixth International Workshop on Wearable and Implantable Body Sensor Networks.

Metallurgical appraisal of instabilities arising in machining

Paul K. Wright, P. Wright, P. Smith, 1978 .

Material behaviour in deformation zones of machining operation

P. Wright, P. K. Wright, J. L. Robinson, 1977 .

A 1.9GHz RF Transmit Beacon using Environmentally Scavenged Energy

Jan M. Rabaey, Paul K. Wright, Brian Otis, 2003 .

Frictional interactions in machining: comparisons between transparent sapphire and steel cutting tools

P. Wright, 1981 .

A Wireless Sensor Network and Incident Command Interface for Urban Firefighting

Paul K. Wright, Andrew Redfern, Joel Wilson, 2007, 2007 Fourth Annual International Conference on Mobile and Ubiquitous Systems: Networking & Services (MobiQuitous).