M. Jeng

发表

Rapid mold temperature control in injection molding by using steam heating

M. Jeng, S. Chen, P. S. Minh, 2010 .

The use of a quasi-naturalistic riding method to investigate bicyclists' behaviors when motorists pass.

Ming-Chang Jeng, Ji-Liang Doong, Ching-Huei Lai, 2013, Accident; analysis and prevention.

Driver fatigue and highway driving: A simulator study

M. Jeng, J. Doong, P. Ting, 2008, Physiology & Behavior.

Study on Injection Molding Parameters for Thin-Shell Plastic Parts Using a Neural Network–Based Approach

M. Jeng, Jen-Chang Lin, Yung-Kuang Yang, 2009 .

The Assessment of Stability and Reliability of a Virtual Reality-Based Intravenous Injection Simulator

Chin-Ping Fung, Ming-Chang Jeng, Ji-Liang Doong, 2008, Computers, informatics, nursing : CIN.

Integrated model of simulated occupant injury risk and real medical costs.

Ming-Chang Jeng, Ji-Liang Doong, Wei-Chung Liu, 2009, Journal of safety research.

Thermohydrodynamic Analysis and Design of Dual Conical-Cylindrical Bearings Using Non-Newtonian Lubricants

Ming-Chang Jeng, Yung-Kuang Yang, M. Jeng, 2006 .

Analysis of thermal effects on the misaligned hydraulic servo cylinder

Ming-Chang Jeng, Yung-Kuang Yang, M. Jeng, 2001 .

Comparison of Thermal Effects on the Conical-Cylindrical Bearing with 2-D and 3-D Energy Equations

Ming-Chang Jeng, Yung-Kuang Yang, M. Jeng, 2002 .

Thermohydrodynamic Analysis of the Misaligned Conical-Cylindrical Bearing with Non-Newtonian Lubricants

Ming-Chang Jeng, Yung-Kuang Yang, M. Jeng, 2003 .

Analysis of Viscosity Interaction and Heat Transfer on the Dual Conical-Cylindrical Bearing©

Ming-Chang Jeng, Yung-Kuang Yang, M. Jeng, 2004 .

Mortality burden from motor vehicle accidents in Taiwan.

Kai-Kuo Chang, Wei-Shin Huang, Ming-Chang Jeng, 2008, Public health nursing.

Differences in Cognitive Process-Related Skills between Taxi and Non-Taxi Drivers between 50 and 70 Years Old

M. Jeng, Kai-Hsiang Chuang, Ching-Huei Lai, 2014, Perceptual and motor skills.

A Tolerance Allocation Optimization Design for Product Components-Using Particle Swarm Algorithm

M. Jeng, Chin-Young Lin, Wei-Hsin Huang, 2014 .

Wear behaviour of solid lubricants Ag and BaF2-CaF2 obtained by laser surface cladding

M. Jeng, Y. Soong, 1993 .

Fatigue crack growth rate of zirconia ceramics

M. Jeng, Jiun-Ren Hwang, J. Shih, 1997 .

Optimization of wire electrical discharge machining of pure tungsten using neural network and response surface methodology

C-J Tzeng, Y-K Yang, M-H Hsieh, 2011 .

Dry Sliding Wear Properties of Ultra-high Molecular Weight Polyethylene Parts Made by the Injection Molding Process

M. Jeng, Hsien-Chang Kuo, 2011 .

Post weld heat treatment effects on fatigue crack propagation in an electron beam weldment

M. Jeng, Chien-Chun Wang, J. Hwang, 1993 .

A study on the wear resistance characteristics of pulse electroforming Ni–P alloy coatings as plated

M. Jeng, M. Ger, K. Hou, 2007 .

The heat treatment effects on the structure and wear behavior of pulse electroforming Ni-P alloy coatings

M. Jeng, M. Ger, K. Hou, 2007 .

A Study on Wear Resistance of HVOF-Sprayed Ni-MoS2 Self-Lubricating Composite Coatings

Y. L. Liu, M. Jeng, J. Hwang, 2015, Journal of Thermal Spray Technology.

Evidence for the selective attention mechanism and dual-task interference.

Wei-Shin Huang, Ming-Chang Jeng, Ji-Liang Doong, 2009, Applied ergonomics.

Integrating video-capture virtual reality technology into a physically interactive learning environment for English learning

Jie Chi Yang, Chih Hung Chen, Ming Chang Jeng, 2010, Comput. Educ..

Abrasive wear study of bainitic nodular cast iron

M. Jeng, 1993, Journal of Materials Science.

Study of an assembly tolerance allocation model based on Monte Carlo simulation

Wei-Hsin Huang, Ming-Chang Jeng, Ji-Liang Doong, 1997 .

Induction heating with the ring effect for injection molding plates

M. Jeng, S. Chen, P. S. Minh, 2012 .

Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis

Ming-Chang Jeng, Yu-Hsin Lin, Yung-Kuang Yang, 2009 .

Mechanical properties of gas-assisted injection moulded PS, PP and Nylon parts

M. Jeng, S. Chen, R. Chien, 1999 .

Survival hazards of road environment factors between motor-vehicles and motorcycles.

Wei-Shin Huang, Ming-Chang Jeng, Ji-Liang Doong, 2009, Accident; analysis and prevention.

Effects of part geometry and injection molding conditions on the tensile properties of ultra-high molecular weight polyethylene polymer

M. Jeng, Hsien-Chang Kuo, 2010 .

Optimization of die casting conditions for wear properties of alloy AZ91D components using the Taguchi method and design of experiments analysis

Ming-Chang Jeng, Yung-Kuang Yang, Jeong-Lian Wen, 2009 .

The study on the tribological properties of fiber-reinforced PBT composites for various injection molding process parameters

M. Jeng, C. Fung, T. Li, 2002 .

A Desktop Virtual Reality Earth Motion System in Astronomy Education

Jie-Chi Yang, Chih-Hung Chen, Sarah Shen, 2007, J. Educ. Technol. Soc..

The effects of carbon content and microstructure on the metal removal rate in electrochemical machining

M. Jeng, J. Doong, Chih-Wen Yang, 1993 .

Analyses and Measurements on Bending Performance of Gas-Assisted Injection Molded Parts

M. Jeng, S. Chen, R. Chien, 1999 .

Differences in urban and rural accident characteristics and medical service utilization for traffic fatalities in less-motorized societies.

Ming–Der Li, Ji–Liang Doong, Kai–Kuo Chang, 2008, Journal of safety research.

The influence of injection molding on tribological characteristics of ultra-high molecular weight polyethylene under dry sliding

M. Jeng, Hsien-Chang Kuo, 2010 .

An investigation of thermal sprayed aluminum/hard anodic composite coating on wear and corrosion resistant performance

M. Jeng, C. Su, C. Chang, 2009 .

Effects of Heat Treatment on the Structures and Wear Behaviors of HVOF-Sprayed Ni–MoS2 Coatings

M. Jeng, J. Hwang, Chiao Chang, 2020, MATERIALS TRANSACTIONS.

Psychological benefits of virtual reality for patients in rehabilitation therapy.

Chin-Ping Fung, Tien-Yow Chuang, Ming-Chang Jeng, 2009, Journal of sport rehabilitation.

The Response Patterns of Young Bicyclists to a Right-Turning Motorcycle: A Simulator Study

Ming-Chang Jeng, Ji-Liang Doong, Wei-Chung Liu, 2012, Perceptual and motor skills.

Using data linkage to generate 30-day crash-fatality adjustment factors for Taiwan.

Kai-Kuo Chang, Wei-Shin Huang, Ming-Chang Jeng, 2006, Accident; analysis and prevention.