R. DeVor

发表

The Prediction of Surface Accuracy in End Milling

W. Kline, R. DeVor, I. Shareef, 1982 .

Agile manufacturing research: accomplishments and opportunities

R. DeVor, R. Graves, J. Mills, 1997 .

A Submicron Multiaxis Positioning Stage for Micro- and Nanoscale Manufacturing Processes

R. DeVor, S. Kapoor, A. Balasubramanian, 2008 .

An application of multiple criteria decision making principles for planning machining operations

R. DeVor, M. Dessouky, M. Ghiassi, 1984 .

Microstructure-Level Force Prediction Model for Micro-Milling of Multi-Phase Materials

R. DeVor, S. Kapoor, M. Vogler, 2001, Manufacturing Engineering.

Machining Simulation of Ductile Iron and its Constituents: Part II — Numerical Simulation and Experimental Validation of Machining

R. DeVor, D. Bammann, S. Kapoor, 2001, Manufacturing Engineering.

Microstructure-Level Modeling of Ductile Iron Machining

Richard E. DeVor, Shiv Gopal Kapoor, L. Chuzhoy, 2001, Manufacturing Engineering.

Machining Simulation of Ductile Iron and Its Constituents, Part 2: Numerical Simulation and Experimental Validation of Machining

Richard E. DeVor, Shiv Gopal Kapoor, L. Chuzhoy, 2001 .

Machining Simulation of Ductile Iron and Its Constituents, Part 1: Estimation of Material Model Parameters and Their Validation

Richard E. DeVor, Shiv Gopal Kapoor, Armand Joseph Beaudoin, 2001 .

Chatter Stability Analysis of the Variable Speed Face-Milling Process

Geir E. Dullerud, Richard E. DeVor, Shiv Gopal Kapoor, 2001 .

On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part I: Surface Generation

Richard E. DeVor, Shiv Gopal Kapoor, Michael P. Vogler, 2004 .

Statistical Quality Design and Control: Contemporary Concepts and Methods

Richard E. DeVor, John W. Sutherland, Tsong-how Chang, 1992 .

Effect of tool-tip vibration and stability on acoustic emission generation in micro-endmilling

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2007 .

Influence of Thermal Effects on Hole Quality in Dry Drilling, Part 1: A Thermal Model of Workpiece Temperatures

Richard E. DeVor, Shiv Gopal Kapoor, Shiva Kalidas, 2002 .

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Richard E. DeVor, Shiv Gopal Kapoor, Anil K. Srivastava, 2012 .

Droplet Behavior on a Rotating Surface for Atomization-Based Cutting Fluid Application in Micromachining

John E. Wentz, R. DeVor, S. Kapoor, 2010 .

Solvent extraction of zein from dry-milled corn

R. DeVor, M. Cheryan, R. Shukla, 2000 .

The Influence of Fluid Management Policy and Operational Changes on Metalworking Fluid Functionality

R. DeVor, S. Kapoor, N. Rajagopalan, 2004 .

Charts for the Interpretation and Estimation of the Second Order Autoregressive Model

S. Wu, R. DeVor, C. M. Stralrowski, 1970 .

A Microstructure-Level Material Model for Simulating the Machining of Carbon Nanotube Reinforced Polymer Composites

R. DeVor, S. Kapoor, J. Samuel, 2008 .

Analysis of Droplet Spreading on a Rotating Surface and the Prediction of Cooling and Lubrication Performance of an Atomization-Based Cutting Fluid System

R. DeVor, S. Kapoor, J. Samuel, 2013 .

Microstructure-Level Machining Simulation of Carbon Nanotube Reinforced Polymer Composites—Part II: Model Interpretation and Application

R. DeVor, S. Kapoor, J. Samuel, 2008 .

An approach to the economic manufacture of an aerostatic lead screw for micro-scale machine tools

R. DeVor, S. Kapoor, Kurt Adair, 2011 .

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

Richard E. DeVor, Shiv Gopal Kapoor, Johnson Samuel, 2012 .

Investigation of flux decline in tortuous pore structures via three-dimensional simulation of cross-flow microfilter fouling

John E. Wentz, R. DeVor, S. Kapoor, 2014 .

Performance of Ingredients in a Soybean Whipped Topping: A Response Surface Analysis

R. DeVor, M. Steinberg, L. Wei, 1988 .

Applicability of Microfiltration for Recycling Semi-Synthetic Metalworking Fluids

John E. Wentz, R. DeVor, S. Kapoor, 2007 .

Ingredient-Wise Study of Flux Characteristics in the Ceramic Membrane Filtration of Uncontaminated Synthetic Metalworking Fluids, Part 2: Analysis of Underlying Mechanisms

Steven J. Skerlos, Richard E. DeVor, Shiv Gopal Kapoor, 2000 .

Transiently stable emulsions for metalworking fluids

R. DeVor, S. Kapoor, Peter J. Bittorf, 2011 .

Modeling chip-evacuation forces and prediction of chip-clogging in drilling

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2002 .

The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science

Kornel Ehmann, Shiv Gopal Kapoor, Richard E. DeVor, 2004 .

Machining-Induced Residual Stress: Experimentation and Modeling

Richard E. DeVor, Shiv Gopal Kapoor, Kurt Jacobus, 2000 .

Effect of microstructural parameters on the machinability of aligned carbon nanotube composites

R. DeVor, K. Hsia, S. Kapoor, 2010 .

Microstructure-Level Machining Simulation of Carbon Nanotube Reinforced Polymer Composites-Part I. Model Development and Validation

R. DeVor, S. Kapoor, J. Samuel, 2008 .

Response Surface Methodology Approach to the Optimization of Boneless Ham Yield

R. DeVor, P. Bechtel, R. Motycka, 1984 .

Ingredient-Wise Study of Flux Characteristics in the Ceramic Membrane Filtration of Uncontaminated Synthetic Metalworking Fluids, Part 1: Experimental Investigation of Flux Decline

Steven J. Skerlos, Richard E. DeVor, Shiv Gopal Kapoor, 2000 .

A RESPONSE SURFACE METHODOLOGY APPROACH TO THE OPTIMIZATION OF WHIPPING PROPERTIES OF AN ULTRAFILTERED SOY PRODUCT

Richard E. DeVor, Munir Cheryan, R. DeVor, 1980 .

International Assessment of Research and Development in Micromanufacturing

Thomas R. Kurfess, Kornel Ehmann, Kamlakar P Rajurkar, 2005 .

An Experimental Investigation of the Crack Growth Phenomenon for Drilling of Fiber-Reinforced Composite Materials

Richard E. DeVor, Shiv Gopal Kapoor, R. DeVor, 1996 .

A Mechanistic Approach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite Materials

R. DeVor, S. Kapoor, V. Chandrasekharan, 1993 .

Effect of Carbon Nanotube (CNT) Loading on the Thermomechanical Properties and the Machinability of CNT-Reinforced Polymer Composites

R. DeVor, K. Hsia, S. Kapoor, 2009 .

Effect of Carbon Nanotube (CNT) Loading on the Thermo-Mechanical Properties and the Machinability of CNT-Reinforced Polymer Composites

R. DeVor, K. Hsia, S. Kapoor, 2008 .

Experimental Investigation of the Machinability of Polycarbonate Reinforced With Multiwalled Carbon Nanotubes

R. DeVor, K. Hsia, S. Kapoor, 2006 .

An Analytical Model for the Prediction of Minimum Chip Thickness in Micromachining

Richard E. DeVor, Shiv Gopal Kapoor, R. DeVor, 2006 .

An Experimental Approach to Machinability Testing

Richard E. DeVor, John C. Miller, R. DeVor, 1980 .

Cutting Mechanisms and Their Influence on Dynamic Forces, Vibrations and Stability in Micro-Endmilling

Martin B.G. Jun, Shiv Gopal Kapoor, Richard E. DeVor, 2004 .

A Slip-Line Field for Ploughing During Orthogonal Cutting

Shiv Gopal Kapoor, Richard E. DeVor, Daniel J. Waldorf, 1997, Manufacturing Science and Engineering: Volume 2.

Experimentation on the Residual Stresses Generated by Endmilling

Richard E. DeVor, Shiv Gopal Kapoor, Kurt Jacobus, 2001 .

On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part II: Cutting Force Prediction

Richard E. DeVor, Shiv Gopal Kapoor, Michael P. Vogler, 2004 .

An Experimental Evaluation of an Atomization-Based Cutting Fluid Application System for Micromachining

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2008 .

Floquet Theory Based Approach for Stability Analysis of the Variable Speed Face-Milling Process

Richard E. DeVor, Shiv Gopal Kapoor, R. DeVor, 2002 .

Mechanistic Modeling of the Ball End Milling Process for Multi-Axis Machining of Free-Form Surfaces

Richard E. DeVor, Shiv Gopal Kapoor, Rixin Zhu, 2001 .

Estimation of the specific cutting pressures for mechanistic cutting force models

Richard E. DeVor, Shiv Gopal Kapoor, S. Jayaram, 2001 .

Evaluation of a spindle-based force sensor for monitoring and fault diagnosis of machining operations

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2002 .

Investigation of the Dynamics of Microend Milling—Part II: Model Validation and Interpretation

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

Model-Based Analysis of the Surface Generation in Microendmilling—Part I: Model Development

Richard E. DeVor, Shiv Gopal Kapoor, Xinyu Liu, 2007 .

The effect of runout on cutting geometry and forces in end milling

Richard E. DeVor, W. A. Kline, W. Kline, 1983 .

The effects of process faults and misalignments on the cutting force system and hole quality in reaming

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

Investigation of the Dynamics of Microend Milling—Part I: Model Development

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems

John W. Sutherland, Richard E. DeVor, J. Sutherland, 1986 .

A Dual-Mechanism Approach to the Prediction of Machining Forces, Part 1: Model Development

William J. Endres, Richard E. DeVor, Shiv Gopal Kapoor, 1995 .

Machining Process Modeling: A Review

Kornel Ehmann, Richard E. DeVor, Shiv Gopal Kapoor, 1997 .

A Model for the Prediction of Surface Flatness in Face Milling

Shreyes N. Melkote, Richard E. DeVor, Shiv Gopal Kapoor, 1997 .

DEVELOPMENT OF MECHANISTIC MODELS FOR THE PREDICTION OF MACHINING PERFORMANCE: MODEL BUILDING METHODOLOGY

Richard E. DeVor, Shiv Gopal Kapoor, Rixin Zhu, 1998 .

An Enhanced Cutting Force Model for Face Milling With Variable Cutter Feed Motion and Complex Workpiece Geometry

Richard E. DeVor, Shiv Gopal Kapoor, F. Gu, 1997 .

The prediction of cutting forces in end milling with application to cornering cuts

Richard E. DeVor, William A. Kline, J. R. Lindberg, 1982 .

Microfiltration of Polyoxyalkylene Metalworking Fluid Lubricant Additives Using Aluminum Oxide Membranes

Steven J. Skerlos, Richard E. DeVor, Shiv Gopal Kapoor, 2001 .

A hybrid process for manufacturing surgical-grade knife blade cutting edges from bulk metallic glass

R. DeVor, S. Kapoor, Alex J. Krejcie, 2012 .

Finite element-based study of the mechanics of microgroove cutting

Richard E. DeVor, Shiv Gopal Kapoor, Keith A. Bourne, 2013 .

Transforming the Landscape of Manufacturing: Distributed Manufacturing Based on Desktop Manufacturing (DM)2

Jian Cao, Kornel Ehmann, Richard E. DeVor, 2012 .

A model for thread milling cutting forces

Anna Carla Araujo, Martin B.G. Jun, Richard E. DeVor, 2006 .

A Stability Solution for the Axial Contour-Turning Process

Rohit G. Reddy, Richard E. DeVor, Shiv Gopal Kapoor, 2002 .

An Elastodynamic Model of Frictional Contact and Its Influence on the Dynamics of a Workpiece-Fixture System

Richard E. DeVor, Shiv Gopal Kapoor, B. Fang, 2001 .

An international assessment of micro-manufacturing research technology

Thomas R. Kurfess, Kornel Ehmann, Kamlakar P Rajurkar, 2005 .

Modeling of turning process cutting forces for grooved tools

Richard E. DeVor, Shiv Gopal Kapoor, Rixin Zhu, 2002 .

Development of a Novel Metalworking Fluid Engineered for Use With Microfiltration Recycling

John E. Wentz, R. DeVor, S. Kapoor, 2006 .

A methodology for integrated quality systems

Richard E. DeVor, Shiv Gopal Kapoor, M. I. Dessouky, 1987 .

Microstructure-Level Model for the Prediction of Tool Failure in WC-Co Cutting Tool Materials

Richard E. DeVor, Shiv Gopal Kapoor, Sunghyuk Park, 2006 .

Modeling and analysis of internal thread forming

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2002 .

EFFECT OF VARIABLE CHIP LOAD ON MACHINING PERFORMANCE IN FACE MILLING.

Richard E. DeVor, Shiv Gopal Kapoor, H. J. Fu, 1983 .

Development of an automated microfactory: Part 1 - Microfactory architecture and sub-systems development

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Honegger, 2006 .

Development of an automated microfactory: Part 2 - Experimentation and analysis

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Honegger, 2006 .

OPTIMAL DESIGN OF TOOTH SPACING IN FACE MILLING VIA A DYNAMIC FORCE MODEL.

Richard E. DeVor, Shiv Gopal Kapoor, H. J. Fu, 1984 .

Modeling and analysis of aerodynamic noise in milling cutters

Richard E. DeVor, Shiv Gopal Kapoor, Karthikeyan Sampath, 2007 .

Influence of Friction Damping on Workpiece-Fixture System Dynamics and Machining Stability

Richard E. DeVor, Shiv Gopal Kapoor, B. Fang, 2002 .

Analytical Stability Analysis of Variable Spindle Speed Machining

Richard E. DeVor, Shiv Gopal Kapoor, S. Jayaram, 2000 .

Nonlinear influence of effective lead angle in turning process stability

Richard E. DeVor, Shiv Gopal Kapoor, Michael P. Vogler, 2002 .

An Investigation of Variable Spindle Speed Face Milling for Tool-Work Structures With Complex Dynamics, Part 1: Simulation Results

Richard E. DeVor, Shiv Gopal Kapoor, R. Radulescu, 1997 .

Machining Process Models for Product and Process Design

Placid Mathew Ferreira, John W. Sutherland, Richard E. DeVor, 1988 .

Model-Based Analysis of the Surface Generation in Microendmilling—Part II: Experimental Validation and Analysis

Richard E. DeVor, Shiv Gopal Kapoor, Xinyu Liu, 2007 .

The Effects of Variable Speed Cutting on Vibration Control in Face Milling

Shih-Chieh Lin, Richard E. DeVor, Shiv Gopal Kapoor, 1990 .

A dual-mechanism approach to the prediction of machining forces, part 2: Calibration and validation

William J. Endres, Richard E. DeVor, Shiv Gopal Kapoor, 1995 .

Analysis of Feed Errors in Tapping by Contact Stress Model

Richard E. DeVor, Shiv Gopal Kapoor, Ajit Pal S Dogra, 2002 .

Use of radial forces for fault detection in tapping

Richard E. DeVor, Shiv Gopal Kapoor, William A. Kline, 2002 .

Mechanistic Model for Tapping Process With Emphasis on Process Faults and Hole Geometry

Richard E. DeVor, Shiv Gopal Kapoor, Ajit Pal S Dogra, 1999, Manufacturing Science and Engineering.

Prediction of Thread Quality by Detection and Estimation of Tapping Faults

Richard E. DeVor, Shiv Gopal Kapoor, O. Mezentsev, 2002 .

An Evaluation of Ploughing Models for Orthogonal Machining

Richard E. DeVor, Shiv Gopal Kapoor, Daniel J. Waldorf, 1999 .

MECHANISTIC MODEL FOR THE PREDICTION OF THE FORCE SYSTEM IN FACE MILLING OPERATIONS.

Richard E. DeVor, Shiv Gopal Kapoor, Richard E. DeVor, 1984 .

An Investigation of Variable Spindle Speed Face Milling for Tool-Work Structures With Complex Dynamics, Part 2: Physical Explanation

Richard E. DeVor, Shiv Gopal Kapoor, R. Radulescu, 1997 .

Modeling and Prediction of Cutting Noise in the Face-Milling Process

Richard E. DeVor, Shiv Gopal Kapoor, Karthikeyan Sampath, 2007 .

Modeling chip-evacuation forces in drilling for various flute geometries

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2003 .

Finite Element Modeling for Tap Design Improvement in Form Tapping

Richard E. DeVor, Shiv Gopal Kapoor, Curtis Warrington, 2006 .

Worn Tool Forces Based on Ploughing Stresses

Shiv Gopal Kapoor, Richard E. DeVor, Daniel J. Waldorf, 1999 .

An Algorithmic Strategy for Automated Generation of Multicomponent Software Tools for Virtual Manufacturing

Diego Klabjan, Richard E. DeVor, Shiv Gopal Kapoor, 2005 .

A Mechanistic Model to Predict the Cutting Force System for Arbitrary Drill Point Geometry

Richard E. DeVor, Shiv Gopal Kapoor, V. Chandrasekharan, 1998 .

A NEW MECHANISTIC MODEL FOR PREDICTING WORN TOOL CUTTING FORCES

Richard E. DeVor, Shiv Gopal Kapoor, David W. Smithey, 2001 .

Analysis of Force Shape Characteristics and Detection of Depth-of-Cut Variations in End Milling

Liuqing Yang, Richard E. DeVor, Shiv Gopal Kapoor, 2005 .

Experimental investigation of the machinabilty of polycarbonate reinforced with multiwalled carbon nanotubes

R. DeVor, K. Hsia, S. Kapoor, 2005 .

An Integrated Quality Systems Approach to Quality and Productivity Improvement in Continuous Manufacturing Processes

Richard E. DeVor, Shiv Gopal Kapoor, Kevin J. Dooley, 1986 .

Predictive model for the full biaxial surface and subsurface residual stress profiles from turning

Richard E. DeVor, Shiv Gopal Kapoor, Kurt Jacobus, 2001 .

Experimental Investigation of Thread Formation in Form Tapping

Richard E. DeVor, Shiv Gopal Kapoor, Curtis Warrington, 2005 .

A Chisel Edge Model for Arbitrary Drill Point Geometry

Richard E. DeVor, Shiv Gopal Kapoor, Anish Paul, 2005 .

A Mechanistic Force Model for Contour Turning

Rohit G. Reddy, Richard E. DeVor, Shiv Gopal Kapoor, 1998, Manufacturing Science and Engineering.

Microstructure-Level Model for the Prediction of Tool Failure in Coated WC-Co Cutting Tool Materials During Intermittent Cutting

Richard E. DeVor, Shiv Gopal Kapoor, Sunghyuk Park, 2007 .

An investigation of magnetic-field-assisted material removal in micro-EDM for nonmagnetic materials

Richard E. DeVor, Shiv Gopal Kapoor, V. Surla, 2011 .

Burr formation in drilling intersecting holes with Machinable Austempered Ductile Iron (MADI

R. DeVor, S. Joshi, S. Kapoor, 2007 .