I. Jawahir

发表

The effects of cryogenic cooling on surface integrity in hard machining: A comparison with dry machining

D. Umbrello, F. Micari, I. Jawahir, 2011 .

Surface integrity in cryogenic machining of nickel based alloy—Inconel 718

I. Jawahir, F. Pušavec, H. Hamdi, 2011 .

Cryogenic machining of porous tungsten for dispenser cathode applications

I. Jawahir, F. Pušavec, J. Tarter, 2008, 2008 IEEE International Vacuum Electronics Conference.

Analysis of Surface Integrity in Dry and Cryogenic Machining of AZ31B Mg Alloys

D. Umbrello, I. Jawahir, S. Caruso, 2011 .

Cryogenic Processing of Biomaterials for Improved Surface Integrity and Product Sustainability

I. Jawahir, S. Yang, O. Dillon, 2011 .

Microstructural Changes of AZ31 Magnesium Alloys Induced by Cryogenic Machining and Its Influence on Corrosion Resistance in Simulated Body Fluid for Biomedical Applications

I. Jawahir, O. Dillon, Z. Pu, 2010 .

Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools

I. Jawahir, A. Moisan, G. Poulachon, 2001 .

Progressive tool-wear in machining with coated grooved tools and its correlation with cutting temperature

I. Jawahir, O. Dillon, G. Poulachon, 2005 .

Progressive tool-wear mechanisms and their effects on chip-curl/chip-form in machining with grooved tools: an extended application of the equivalent toolface (ET) model

K. C. Ee, I. S. Jawahir, A. K. Balaji, 2003 .

Force decomposition model for tool-wear in turning with grooved cutting tools

A. K. Balaji, I. Jawahir, K. Ee, 2001 .

The influence of cryogenic cooling on process stability in turning operations

Janez Kopac, I. S. Jawahir, Edvard Govekar, 2011 .

Analysis of Tool-wear and Cutting Force Components in Dry, Preheated, and Cryogenic Machining of NiTi Shape Memory Alloys☆

I. S. Jawahir, Haluk E. Karaca, Ronald D. Noebe, 2013 .

Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining

I. S. Jawahir, Tao Lu, Yusuf Kaynak, 2014 .

Size effects in finish machining of porous powdered metal for engineered surface quality

I. Jawahir, J. Schoop, T. Balk, 2016 .

Size effects in manufacturing of metallic components

I. Jawahir, D. Biermann, F. Vollertsen, 2009 .

Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius

I. Jawahir, O. Dillon, K. Ee, 2005 .

Evaluation of Chip Morphology in Hard Turning Using Constitutive Models and Material Property Data

I. Jawahir, A. Moisan, G. Poulachon, 2001, Manufacturing Engineering.

Finite element modeling of microstructural changes in turning of AA7075-T651 Alloy

L. Settineri, D. Umbrello, I. Jawahir, 2013 .

Towards Predictive Modeling and Optimization of Machining Operations

A. K. Balaji, C. A. van Luttervelt, I. Jawahir, 1997, Manufacturing Science and Engineering: Volume 2.

SURFACE INTEGRITY CHARACTERIZATION AND PREDICTION IN MACHINING OF HARDENED AND DIFFICULT-TO-MACHINE ALLOYS: A STATE-OF-ART RESEARCH REVIEW AND ANALYSIS

Yuebin Guo, I. S. Jawahir, W. Li, 2009 .

Wear behavior of CBN tools while turning various hardened steels

Gérard Poulachon, I. S. Jawahir, B. P. Bandyopadhyay, 2004 .

Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material

I. S. Jawahir, Yusuf Kaynak, I. Jawahir, 2016 .

Correlation of surface integrity with processing parameters and advanced interface cooling/lubrication in burnishing of Ti-6Al-4V alloy

I. Jawahir, J. Schoop, J. Caudill, 2018, Advances in Materials and Processing Technologies.

Analysis of the influence of nitrogen phase and surface heat transfer coefficient on cryogenic machining performance

Janez Kopac, I. S. Jawahir, Franci Pusavec, 2016 .

The influence of the microstructure of hardened tool steel workpiece on the wear of PCBN cutting tools

Gérard Poulachon, I. S. Jawahir, B. P. Bandyopadhyay, 2003 .

The Effect of Active Phase of the Work Material on Machining Performance of a NiTi Shape Memory Alloy

I. S. Jawahir, Haluk E. Karaca, Ronald D. Noebe, 2015, Metallurgical and Materials Transactions A.

Chip formation and phase transformation in orthogonal machining of NiTi shape memory alloy: microstructure-based modelling and experimental validation

I. Jawahir, D. Biermann, Y. Kaynak, 2020 .

Effects of cryogenic cooling on surface layer alterations in machining of AISI 52100 steels

I. S. Jawahir, O. W. Dillon, Domenico Umbrello, 2012 .

On the Effects of Residual Stresses Induced by Coated and Uncoated Cutting Tools with Finite Edge Radii in Turning Operations

I. S. Jawahir, José Outeiro, A. M. Dias, 2006 .

On Designing for Enhanced Product Sustainability by Considering the Induced Residual Stresses in Machining Operations

I. Jawahir, O. Dillon, J. Outeiro, 2007 .

An Investigation of Process Performance when Drilling Carbon Fiber Reinforced Polymer (CFRP) Composite under Dry, Cryogenic and MQL Environments

I. Jawahir, A. Uysal, A. Nagaraj, 2020 .

Experimental study on surface integrity of cryogenically machined Ti-6Al-4V alloy for biomedical devices

F. Klocke, I. Jawahir, B. Döbbeler, 2018 .

Validation of the slip-line model for serrated chip formation in orthogonal turning under dry and MQL conditions

I. Jawahir, A. Uysal, 2019, Procedia CIRP.

A review of surface integrity in machining of hardened steels

I. Jawahir, Á. R. Machado, W. Sales, 2020, Journal of Manufacturing Processes.

An Experimental Study of Cryogenic Machining on Nanocrystalline Surface Layer Generation

I. S. Jawahir, Volker Schulze, Frederik Zanger, 2014 .

Modeling and Simulation of Machining-induced Surface Integrity Characteristicsof NiTi Alloy

I. Jawahir, Y. Kaynak, S. Manchiraju, 2015 .

The effects of machining on the microstructure and transformation behavior of NiTi Alloy

I. Jawahir, H. Karaca, Y. Kaynak, 2014 .

Surface Characteristics of Machined NiTi Shape Memory Alloy: The Effects of Cryogenic Cooling and Preheating Conditions

I. Jawahir, H. Karaca, Y. Kaynak, 2017, Journal of Materials Engineering and Performance.

Machining

A. K. Balaji, I. Jawahir, 2019, Encyclopedia of Aluminum and Its Alloys.

Contour Turning of Aluminum Alloys with PCD Flat-faced and Diamond Coated Grooved Tools: A Study on Dry Machining Performance Evaluation

A. K. Balaji, I. Jawahir, 2000 .

Sulphide inclusion effects on tool-wear in high productivity milling of tool steels

J. Lebrun, I. Jawahir, G. Poulachon, 2002 .

An investigation of sustained machining performance for controlled surface quality requirements in porous tungsten

I. Jawahir, M. Effgen, D. Head, 2005, IEEE Transactions on Electron Devices.

Surface integrity in material removal processes: Recent advances

Ekkard Brinksmeier, David K. Aspinwall, I. S. Jawahir, 2011 .

Analysis of residual stresses induced by dry turning of difficult-to-machine materials

I. S. Jawahir, Franci Pusavec, José Outeiro, 2008 .

Dry and Cryogenic Machining: Comparison from the Sustainability Perspective

L. Settineri, I. Jawahir, O. Dillon, 2012 .

Recent advances in modelling of metal machining processes

Matthew A. Davies, I. S. Jawahir, Tuğrul Özel, 2013 .

Sustainable machining of high temperature Nickel alloy – Inconel 718: part 1 – predictive performance models

Janez Kopac, I. S. Jawahir, Franci Pusavec, 2014 .

Cryogenic machining of porous tungsten for enhanced surface integrity

I. S. Jawahir, J. Schoop, Volker Schulze, 2016 .

Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining

I. Jawahir, H. Karaca, Y. Kaynak, 2013 .

The Effects of Depth of Cut and Pre-cooling on Surface Porosity in Cryogenic Machining of Porous Tungsten

I. S. Jawahir, J. Schoop, I. Jawahir, 2013 .

Enhanced Machinability of Ti-5553 Alloy from Cryogenic Machining: Comparison with MQL and Flood-cooled Machining and Modeling

I. S. Jawahir, David A. Puleo, I. Jawahir, 2015 .

A review of surface integrity in machining and its impact on functional performance and life of machined products

I. S. Jawahir, O. W. Dillon, José Outeiro, 2008 .

Numerical modeling of the influence of process parameters and workpiece hardness on white layer formation in AISI 52100 steel

I. S. Jawahir, Domenico Umbrello, D. Umbrello, 2009 .

Some Observations of the Chip Formation Process and the White Layer Formation in High Speed Milling of Hardened Steel

I. S. Jawahir, Sabahudin Ekinovic, S. Dolinsek, 2004 .

The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy

I. S. Jawahir, O. W. Dillon, Domenico Umbrello, 2013, The International Journal of Advanced Manufacturing Technology.

Future research directions in the machining of Inconel 718

S. Newman, A. Shokrani, I. Jawahir, 2021 .

Influence of the post-processing operations on surface integrity of metal components produced by laser powder bed fusion additive manufacturing: a review

I. Jawahir, Y. Kaynak, H. M. Khan, 2020 .

Improved Surface Integrity from Cryogenic Machining of Ti-6Al-7Nb Alloy for Biomedical Applications☆

I. Jawahir, D. Puleo, J. Schoop, 2016 .

A Review of Advances in Modeling of Conventional Machining Processes: From Merchant to the Present

S. Liang, S. Melkote, I. Jawahir, 2022, Journal of Manufacturing Science and Engineering.

Additive manufacturing of Ti-6Al-4V alloy- A review

I. Jawahir, D. Buddhi, A. Pramanik, 2022, Journal of Materials Research and Technology.

Evaluation of Present Numerical Models for Predicting Metal Cutting Performance And Residual Stresses

I. S. Jawahir, Domenico Umbrello, José Outeiro, 2015 .

Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions

I. S. Jawahir, Haluk E. Karaca, Yusuf Kaynak, 2015 .

Analysis of surface integrity in drilling carbon fiber reinforced polymer composite material under various cooling/lubricating conditions

I. Jawahir, S. Gururaja, A. Uysal, 2022, Journal of Manufacturing Processes.

The Impact of Novel Material Processing Methods on Component Quality, Life and Performance

I. S. Jawahir, Tao Lu, Yusuf Kaynak, 2014 .

Machining-induced surface integrity in titanium alloy Ti-6Al-4V: An investigation of cutting edge radius and cooling/lubricating strategies

I. Jawahir, Shi Chen, Guangsen Chen, 2022, Journal of Manufacturing Processes.

Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels

I. S. Jawahir, Fazleena Badurdeen, O. W. Dillon, 2010 .

Present Situation and Future Trends in Modelling of Machining Operations Progress Report of the CIRP Working Group ‘Modelling of Machining Operations’

Fritz Klocke, Yusuf Altintas, I. Grabec, 1998 .

Recent Developments in Chip Control Research and Applications

C. A. van Luttervelt, I. S. Jawahir, C. A. Luttervelt, 1993 .

A Review of Engineering Research in Sustainable Manufacturing

Andres F. Clarens, Jaime A. Camelio, Fu Zhao, 2013 .

A methodology for the optimization of PCD compact core drilling in basalt rock

R. F. Hamade, F. Pusavec, S. P. Manthri, 2012 .

Sustainable machining of high temperature Nickel alloy – Inconel 718: part 2 – chip breakability and optimization

Janez Kopac, I. S. Jawahir, O. W. Dillon, 2015 .

Increased Surface Integrity in Porous Tungsten from Cryogenic Machining with Cermet Cutting Tool

I. S. Jawahir, J. Schoop, Volker Schulze, 2016 .

Numerical Modeling of Cutting Forces and Temperature Distribution in High Speed Cryogenic and Flood-cooled Milling of Ti-6Al-4V

I. Jawahir, J. Schoop, J. Caudill, 2019, Procedia CIRP.

Improved Product Quality and Resource Efficiency in Porous Tungsten Machining for Dispenser Cathode Application by Elimination of the Infiltration Process

I. Jawahir, M. Effgen, J. Schoop, 2013 .

The effects of progressive tool wear and tool restricted contact on chip breakability in machining

I. S. Jawahir, X. D. Fang, I. Jawahir, 1993 .

Numerical modeling of Ti-6Al-4V alloy orthogonal cutting considering microstructure dependent work hardening and energy density-based failure behaviors

I. Jawahir, C. Ren, Guangsi Chen, 2022, Journal of Manufacturing Processes.

On modelling the influence of thermo-mechanical behavior in chip formation during hard turning of 100Cr6 bearing steel

Gérard Poulachon, I. S. Jawahir, A. Moisan, 2001 .

Surface integrity and superelastic response of additively manufactured Nitinol after heat treatment and finish machining

I. Jawahir, L. Ceseracciu, S. Bruschi, 2023, CIRP Annals.

The Effects of Cutting Tool Thermal Conductivity on Tool-Chip Contact Length and Cyclic Chip Formation in Machining with Grooved Tools

I. S. Jawahir, E. Lenz, A. K. Balaji, 1999 .

Performance-Based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 2—Assessment of Chip Forms/Chip Breakability

A. K. Balaji, I. S. Jawahir, R. Ghosh, 2006 .

On the Controllability of Chip Breaking Cycles and Modes of Chip Breaking in Metal Machining

I. S. Jawahir, I. Jawahir, 1990 .

The Tool Restricted Contact Effect as a Major Influencing Factor in Chip Breaking: An Experimental Analysis

P.L.B. Oxley, I. S. Jawahir, I. Jawahir, 1988 .

Optimization of multi-pass turning operations using genetic algorithms for the selection of cutting conditions and cutting tools with tool-wear effect

I. S. Jawahir, X. Wang, I. Jawahir, 2001, Proceedings Joint 9th IFSA World Congress and 20th NAFIPS International Conference (Cat. No. 01TH8569).

Cryogenic Machining of Hard-To-Machine Material, AISI 52100: A Study of Chip Morphology and Comparison with Dry Machining

I. S. Jawahir, Domenico Umbrello, Yusuf Kaynak, 2012 .

A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing

I. S. Jawahir, P. W. Marksberry, I. Jawahir, 2008 .

Contour finish turning operations with coated grooved tools : Optimization of machining performance

I. S. Jawahir, Masaya Hagiwara, S. Chen, 2009 .

Web-based optimization of milling operations for the selection of cutting conditions using genetic algorithms

I. S. Jawahir, X Wang, I. Jawahir, 2004 .

A hybrid algorithm for predicting chip form/chip breakability in machining

I. S. Jawahir, X. D. Fang, J. Fei, 1996 .

Optimized tabu search estimation of wear characteristics and cutting forces in compact core drilling of basalt rock using PCD tool inserts

Ramsey F. Hamade, I. S. Jawahir, Chady Ghnatios, 2019, Comput. Ind. Eng..

A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steel

I. S. Jawahir, Domenico Umbrello, Rachid M'Saoubi, 2010 .

Machinability and surface integrity of adhesively bonded Ti/CFRP/Ti hybrid composite laminates under dry and cryogenic conditions

I. Jawahir, I. S. Jawahir, S. Gururaja, 2020 .

An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning

Gérard Poulachon, I. S. Jawahir, I. Jawahir, 2005 .

Optimization of Sustainable Machining of Ti6Al4V Alloy Using Genetic Algorithm for Minimized Carbon Emissions and Machining Costs, and Maximized Energy Efficiency and Human Health Benefits

I. Jawahir, A. Uysal, 2021, Volume 2B: Advanced Manufacturing.

Analysis of slip-line model for serrated chip formation in orthogonal machining of AISI 304 stainless steel under various cooling/lubricating conditions

I. Jawahir, A. Uysal, 2021, Journal of Manufacturing Processes.

Minimising carbon emissions and machining costs with improved human health in sustainable machining of austenitic stainless steel through multi-objective optimisation

I. Jawahir, J. Schoop, A. Uysal, 2020, International Journal of Sustainable Manufacturing.

High speed cryogenic finish machining of Ti-6Al4V with polycrystalline diamond tools

I. Jawahir, J. Schoop, W. F. Sales, 2017 .

Tribological behavior of PCD tools during superfinishing turning of the Ti6Al4V alloy using cryogenic, hybrid and flood as lubri-coolant environments

I. Jawahir, J. Schoop, W. F. Sales, 2017 .

Producing Sustainable Nanostructures in Ti-6Al-4V Alloys for Improved Surface Integrity and Increased Functional Life in Aerospace Applications by Cryogenic Burnishing

I. Jawahir, J. Schoop, J. Caudill, 2019, Procedia CIRP.

Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material

I. Jawahir, Y. Kaynak, T. Xia, 2015, The International Journal of Advanced Manufacturing Technology.

An investigation of the effects of chip flow on tool-wear in machining with complex grooved tools

I. S. Jawahir, X. D. Fang, I. Jawahir, 1995 .

Cutting Speed Dependent Microstructure and Transformation Behavior of NiTi Alloy in Dry and Cryogenic Machining

I. S. Jawahir, Haluk E. Karaca, Yusuf Kaynak, 2014, Journal of Materials Engineering and Performance.

Finite element modeling of microstructural changes in dry and cryogenic machining of AZ31B magnesium alloy

I. S. Jawahir, David A. Puleo, Domenico Umbrello, 2014 .

A Tool-Wear Investigation in Hard Turning of Various Work Materials with CBN Tools

I. Jawahir, G. Poulachon, P. Jacquet, 2003 .

Machining stability in turning operation when cutting with a progressively worn tool insert

K. C. Ee, I. S. Jawahir, M. S. Fofana, 2003 .

A knowledge-based approach for designing effective grooved chip breakers — 2D and 3D chip flow, chip curl and chip breaking

I. S. Jawahir, X. D. Fang, I. Jawahir, 1995 .

The chip control factor in machinability assessments: Recent trends

I. S. Jawahir, I. Jawahir, 1988 .

A universal slip-line model with non-unique solutions for machining with curled chip formation and a restricted contact tool

P.L.B. Oxley, I. S. Jawahir, N. Fang, 2001 .

Evaluation of numerical models for predicting surface integrity in metal cutting

I. S. Jawahir, Domenico Umbrello, José Outeiro, 2015 .

An Analytical Predictive Model and Experimental Validation for Machining with Grooved Tools Incorporating the Effects of Strains, Strain-rates, and Temperatures

N. Fang, I. S. Jawahir, I. Jawahir, 2002 .

Effect of cutting edge radius and cooling strategies on surface integrity in orthogonal machining of Ti-6Al-4V alloy

I. Jawahir, Shi Chen, Guangsen Chen, 2019, Procedia CIRP.

AN INVESTIGATION OF 3-D CURLED CHIP IN MACHINING-PART 2: SIMULATION AND VALIDATION USING FE TECHNIQUES

I. S. Jawahir, O. W. Dillon, R. Ghosh, 1998 .

Towards integration of hybrid models for optimized machining performance in intelligent manufacturing systems

A. K. Balaji, I. S. Jawahir, John R. Baker, 2003 .

Performance-based optimal selection of cutting conditions and cutting tools in multipass turning operations using genetic algorithms

A. K. Balaji, I. S. Jawahir, X. Wang, 2002 .

PREDICTIVE MODELING OF MACHINING PERFORMANCE IN TURNING OPERATIONS

I. S. Jawahir, M. Redetzky, O. W. Dillon, 1998 .

A survey and future predictions for the use of chip breaking in unmanned systems

I. S. Jawahir, I. Jawahir, 1988 .

Modeling the Chip-Work Contact Force for Chip Breaking in Orthogonal Machining With a Flat-Faced Tool

I. S. Jawahir, B. K. Ganapathy, I. Jawahir, 1998 .

Chip-Forms, Chip Breakability, and Chip Control

I. Jawahir, 2019, CIRP Encyclopedia of Production Engineering.

AN INVESTIGATION OF 3-D CURLED CHIP IN MACHINING-PART 1: A MECHANICS-BASED ANALYTICAL MODEL

I. S. Jawahir, O. W. Dillon, R. Ghosh, 1998 .

An Analytical Model for Cyclic Chip Formation in 2-D Machining with Chip Breaking

I. S. Jawahir, X. D. Fang, I. Jawahir, 1996 .

Improved surface integrity from cryogenic machining of Al 7050-T7451 alloy with ultrafine-grained structure

I. Jawahir, Y. Kaynak, B. Huang, 2015 .

Observations on cutting edge radius effects in cryogenic machining of porous tungsten

I. Jawahir, J. Schoop, T. Balk, 2015, 2015 IEEE International Vacuum Electronics Conference (IVEC).

Recent advances in plasticity applications in metal machining: slip-line models for machining with rounded cutting edge restricted contact grooved tools

I. S. Jawahir, I. Jawahir, Xiqun Wang, 2007 .

Development of hybrid predictive models and optimization techniques for machining operations

I. S. Jawahir, Xiao Wang, I. Jawahir, 2007 .

On the interrelationships of some machinability parameters in finish turning with cermet chip forming tool inserts

I. S. Jawahir, N. Qureshi, Joseph A. Arsecularatne, 1992 .

Cryogenic Machining of Biomedical Implant Materials for Improved Functional Performance, Life and Sustainability☆

I. Jawahir, D. Puleo, J. Schoop, 2016 .

Finite Element Simulation of Residual Stresses in Cryogenic Machining of AZ31B Mg Alloy

D. Umbrello, I. Jawahir, O. Dillon, 2014 .

Performance-Based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 3—Optimum Cutting Conditions and Selection of Cutting Tools

A. K. Balaji, I. S. Jawahir, X. Wang, 2007 .

Performance-Based Predictive Models and Optimization Methods for Turning Operations and Applications: Part 1—Tool Wear/Tool Life in Turning with Coated Grooved Tools

K. C. Ee, P. X. Li, A. K. Balaji, 2006 .

A New Parametric Approach for the Assessment of Comprehensive Tool Wear in Coated Grooved Tools

P. X. Li, I. S. Jawahir, R. Gosh, 1995 .

A novel hybrid predictive model and validation of unique hook-shaped residual stress profiles in hard turning

Yuebin Guo, I. S. Jawahir, S. Anurag, 2009 .

Chip form monitoring through advanced processing of cutting force sensor signals

Krzysztof Jemielniak, I. S. Jawahir, Roberto Teti, 2006 .

Cryogenic cooling effect on surface and subsurface microstructural modifications in burnishing of Co–Cr–Mo biomaterial

I. S. Jawahir, David A. Puleo, Domenico Umbrello, 2015 .

An experimental and numerical study of the effect of cryogenic cooling on the surface integrity of drilled holes in AZ31B Mg alloy

Ramsey F. Hamade, I. S. Jawahir, O. W. Dillon, 2015 .

Enhancing the Surface Integrity of Ti-6Al-4V Alloy through Cryogenic Burnishing☆

I. S. Jawahir, J. Schoop, I. Jawahir, 2014 .

MODELING OF WHITE AND DARK LAYER FORMATION IN HARD MACHINING OF AISI 52100 BEARING STEEL

I. S. Jawahir, O. W. Dillon, Domenico Umbrello, 2010 .

Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy With Near Ultra-Fine Grained Structure

I. Jawahir, Y. Kaynak, M. Khraisheh, 2021, Journal of Manufacturing Science and Engineering.

Enhanced Surface Integrity From Cryogenic Machining of AZ31B Mg Alloy: A Physics-Based Analysis With Microstructure Prediction

I. Jawahir, I. S. Jawahir, Z. Pu, 2017 .

Predicting total machining performance in finish turning using integrated fuzzy-set models of the machinability parameters

I. S. Jawahir, X. D. Fang, I. Jawahir, 1994 .

Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy and Validation with FEM-based Burnishing Model☆

I. S. Jawahir, Yusuf Kaynak, I. Jawahir, 2015 .

Finite Element Modeling of Microstructural Changes in Turning of AA7075-T651 Alloy and Validation

L. Settineri, D. Umbrello, I. Jawahir, 2012 .

An investigation of the influence of sulphide inclusions on tool-wear in high speed milling of tool steels

J. Lebrun, I. Jawahir, G. Poulachon, 2001 .

A slip-line model for serrated chip formation in machining of stainless steel and validation

I. Jawahir, A. Uysal, 2018, The International Journal of Advanced Manufacturing Technology.