H. Hamdi

发表

Surface integrity in cryogenic machining of nickel based alloy—Inconel 718

I. Jawahir, F. Pušavec, H. Hamdi, 2011 .

Effect of the belt grinding on the surface texture: Modeling of the contact and abrasive wear

H. Hamdi, H. Zahouani, J. Rech, 2005 .

OPTIMIZATION OF THE CUTTING EDGE GEOMETRY OF COATED CARBIDE TOOLS IN DRY TURNING OF STEELS USING A FINITE ELEMENT ANALYSIS

H. Hamdi, J. Rech, T. Altan, 2009 .

Characterization of abrasive grain’s behavior and wear mechanisms

H. Hamdi, H. Zahouani, M. Dursapt, 2003 .

Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts

Konstantinos-Dionysios Bouzakis, T. Altan, Hédi Hamdi, 2005 .

Improvement of the numerical modeling in orthogonal dry cutting of an AISI 316L stainless steel by the introduction of a new friction model

Hédi Hamdi, Joël Rech, Frédéric Valiorgue, 2008 .

Identification of a friction model—Application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN coated carbide tool

Hédi Hamdi, Jean-Michel Bergheau, Joël Rech, 2008 .

Study of the simultaneous Grinding/Ball-burnishing of AISI 4140 based on finite element simulations and experiments

H. Hamdi, J. Sghaier, Yasmine Charfeddine, 2020 .

Numerical assessment of residual stresses induced by combining turning-burnishing (CoTuB) process of AISI 4140 steel using 3D simulation based on a mixed approach

H. Hamdi, Tarek Mabrouki, S. Sghaier, 2018 .

Tool nose radius effects in turning process

H. Hamdi, Hassen Khlifi, Lefi Abdellaoui, 2020 .

Effects of Gyroscopic Coupling on the Dynamics of a Wind Turbine Blade with Horizontal Axis

H. Hamdi, R. Nasri, C. Mrad, 2012 .

Material Removal Processes by Cutting and Abrasion: Numerical Methodologies, Present Results and Insights

H. Hamdi, Tarek Mabrouki, F. Valiorgue, 2014 .

Analysis of the surface integrity induced by face milling of Laser Metal Deposited Ti-6Al-4V

H. Hamdi, A. Duchosal, A. Morandeau, 2020 .

Diversity and distribution of gelatinous zooplankton in the Southwestern Mediterranean Sea

H. Hamdi, M. Yahia, J. Goy, 2012 .

Analysis of Measured and Predicted Residual Stresses Induced by Finish Cylindrical Grinding of High Speed Steel with CBN Wheel

H. Hamdi, H. Sallem, 2015 .

Ductility improvement of aluminum 1050A rolled sheet by a newly designed ball burnishing tool device

H. Hamdi, T. Benameur, S. Sghaier, 2011, The International Journal of Advanced Manufacturing Technology.

Residual Stresses prediction with a new Thermo Mechanical simulation of Grinding

H. Hamdi, J. Bergheau, A. Brosse, 2008 .

Emissivity calibration for temperatures measurement using thermography in the context of machining

Hédi Hamdi, Jean-Michel Bergheau, Joël Rech, 2013 .

Local material removal mechanisms of cemented carbides in abrasive flow machining

H. Hamdi, C. Courbon, F. Salvatore, 2019, PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019.

Some insights on the modelling of chip formation and its morphology during metal cutting operations

Tarek Mabrouki, Daniel Nelias, Hédi Hamdi, 2016 .

Residual stresses computation in a grinding process

Hédi Hamdi, Hassan Zahouani, Jean-Michel Bergheau, 2004 .

On the residual stress field induced by a scratching round abrasive grain

H. Hamdi, J. Rech, G. Kermouche, 2010 .

Numerical modelling of fatigue crack's initiation in rolling contact of sintered steels

H. Hamdi, H. Zahouani, J. Rech, 2005 .

Numerical modeling and experimental measurement of MQL impingement over an insert in a milling tool with inner channels

Roger Serra, Hédi Hamdi, Arnaud Duchosal, 2015 .

Experimental and numerical study of laser-assisted machining of Ti6Al4V titanium alloy

H. Hamdi, G. Germain, W. B. Salem, 2014 .

Temperature measurement and heat flux characterization in grinding using thermography

Hédi Hamdi, Jean-Michel Bergheau, Alexandre Brosse, 2008 .

Workpiece Surface Integrity

Hédi Hamdi, Joël Rech, H. Hamdi, 2008 .

Some insights on Combined Turning-Burnishing (CoTuB) process on workpiece surface integrity

Hédi Hamdi, Salem Sghaier, Anis Rami, 2018 .

Some insights on Combined Turning-Burnishing (CoTuB) process on workpiece surface integrity

H. Hamdi, S. Sghaier, F. Gharbi, 2018, International Journal of Precision Engineering and Manufacturing.

Ductility improvement of aluminum 1050A rolled sheet by a newly designed ball burnishing tool device

Hédi Hamdi, Tarek Benameur, Salem Sghaier, 2012 .

Residual stresses computation induced by turning of AISI 4140 steel using 3D simulation based on a mixed approach

H. Hamdi, S. Sghaier, A. Kallel, 2017, The International Journal of Advanced Manufacturing Technology.

Residual stresses computation induced by turning of AISI 4140 steel using 3D simulation based on a mixed approach

Salem Sghaier, Sawsen Youssef, Anis Rami, 2017 .

A New Procedure to Increase the Orthogonal Cutting Machining Time Simulated

Tarek Mabrouki, Hédi Hamdi, Jean-Michel Bergheau, 2015, Procedia CIRP.

Elaboration of analytical thermo-mechanical cutting model matched by numerical and experimental results

H. Hamdi, F. Salvatore, Tarek Mabrouki, 2013 .

Modeling and Simulation of Tool Wear During the Cutting Process

Hédi Hamdi, Ferdinando Salvatore, H. Hamdi, 2013 .

The use of numerical simulations to improve a new analytical chip formation model

Tarek Mabrouki, Hédi Hamdi, Ferdinando Salvatore, 2012 .

Numerical modelling of orthogonal cutting: influence of numerical parameters

Hédi Hamdi, Jean-Michel Bergheau, Joël Rech, 2005 .

Experimental study of abrasive process

Hédi Hamdi, Jean-Michel Bergheau, Joël Rech, 2008 .

Numerical Study of Residual Stress Induced by Multi-steps Orthogonal Cutting☆

Hédi Hamdi, Ferdinando Salvatore, H. Hamdi, 2013 .

3D modeling of residual stresses induced in finish turning of an AISI304L stainless steel

Philippe Gilles, Hédi Hamdi, Jean-Michel Bergheau, 2012 .

Microstructural and mechanical properties evolution of 690 nickel-based alloy subjected to severe hand disc grinding conditions

H. Hamdi, O. Calonne, Sawsen Youssef, 2022, Materials Characterization.

Analytical Model of Chip Formation in Case of Orthogonal Cutting Processes

Tarek Mabrouki, Hédi Hamdi, Ferdinando Salvatore, 2011 .

Numerical optimization of the Minimum Quantity Lubrication parameters by inner canalizations and cutting conditions for milling finishing process with Taguchi method

Roger Serra, Hédi Hamdi, Arnaud Duchosal, 2015 .

Multistep hybrid approach applied to material removal operation using cutting tool

Hédi Hamdi, El Houcein Aassif, Ferdinando Salvatore, 2013 .

Numerical and experimental study of residual stress induced by machining process

H. Hamdi, F. Salvatore, Tarek Mabrouki, 2012 .

An experimental and numerical case study of thermal and mechanical consequences induced by laser welding process

H. Hamdi, J. Bergheau, J. Sijobert, 2022, Case Studies in Thermal Engineering.

Centrifugal and gyroscopic effects on dynamic response of rotating cantilever beams under step loading

H. Hamdi, A. Hamdi, R. Nasri, 2023, Mechanics Research Communications.

ANALYTICAL MODEL FOR CHIP FORMATION IN CASE OF ORTHOGONAL MACHINING PROCESS

H. Hamdi, F. Salvatore, Tarek Mabrouki, 2011 .