T. Aoyama

发表

Pre-deformation-assisted cryogenic micromachining for fabrication of three-dimensional unique micro channels

Koji Mishima, Y. Kakinuma, T. Aoyama, 2009 .

Micromachining of Soft Polymer Material applying Cryogenic Cooling

Y. Kakinuma, T. Aoyama, N. Yasuda, 2008 .

Ultra-precision cryogenic machining of viscoelastic polymers

Y. Kakinuma, T. Aoyama, Sinya Kidani, 2012 .

State of Grinding Fluid in the Arc of Contact

T. Aoyama, I. Inasaki, Yoji Tsunasawa, 1982 .

Improvement of Grinding Fluid Application in Creep Feed Grinding : Relation between State of Grinding Fluid Application and Workpiece Temperature

T. Aoyama, I. Inasaki, Yoji Tsunasawa, 1984 .

Controlling metal structure with remelting process in direct energy deposition of Inconel 625

T. Aoyama, Ryo Koike, M. Kondo, 2018 .

Basic properties of Gel-structured electro-rheological fluids

Y. Kakinuma, T. Aoyama, Katsutoshi Tanaka, 2005 .

Application of ER gel with variable friction surface to the clamp system of aerostatic slider

Y. Kakinuma, T. Aoyama, Katsutoshi Tanaka, 2006 .

Performance of Metal Cutting on Endmills Manufactured by Cooling-Air and Minimum Quantity Lubrication Grinding

T. Aoyama, S. Inoue, 2005 .

Educational Program for Design and Production Using Digital Tools (Part 2)( Digital Engineering)

Tojiro Aoyama, Hideki Aoyama, Nirimasa Iida, 2003 .

Fluid elements in machine tools

Tojiro Aoyama, Josef Mayr, Konrad Wegener, 2017 .

Hydrostatic Bearing

T. Aoyama, 2019, CIRP Encyclopedia of Production Engineering.

509 Advanced Motion Control for the Table of Machine Tools with Differential Slider

Kouhei Ohnishi, Seiichiro Katsura, Tojiro Aoyama, 2006 .

Enhancement of in-process identification for stable spindle rotation against chatter vibration with a time-domain milling simulator

Kouhei Ohnishi, Tojiro Aoyama, Ryo Koike, 2015 .

Development of Workpiece Fixturing Planning System

Tojiro Aoyama, Manabu Sasada, T. Aoyama, 2002 .

Development of high stiffness externally pressurized journal air bearings with an automatically controlled restrictor

Tojiro Aoyama, Ichiro Inasaki, H. Yokota, 1992 .

A Study of Nanometric Surface Generation on Tungsten Carbide Using a Micro Polycrystalline Diamond End Mill

Tojiro Aoyama, Kazuo Yamazaki, Kazutoshi Katahira, 2012, Int. J. Autom. Technol..

A study on error compensation on high precision machine tool system using a 2D laser holographic scale system

Kazuo Yamazaki, Tojiro Aoyama, Kayoko Taniguchi, 2012 .

Outlook for the future of the Japan society for precision engineering

Tojiro Aoyama, T. Aoyama, 2017 .

Editorial: High Performance Cutting and Related Manufacturing Technologies

Tojiro Aoyama, T. Aoyama, 2011, Int. J. Autom. Technol..

Performance evaluation of ER-gels with different material parameters

Y. Kakinuma, T. Aoyama, H. Anzai, 2011 .

Development of chatter vibration detection utilizing disturbance observer (1st report) precise sensor-less process monitoring utilizing average T method

Yasuhiro Kakinuma, Tojiro Aoyama, Yui Sudo, 2011 .

Deformation and interface pressure distribution of 1/10 tapered joints at high rotation speed

Masaomi Tsutsumi, Tojiro Aoyama, Soichi Hachiga, 1996 .

Helical Milling of Carbon Fiber Reinforced Plastics Using Ultrasonic Vibration and Liquid Nitrogen

Yasuhiro Kakinuma, Tojiro Aoyama, Takuki Ishida, 2014 .

A computer simulation method for dynamic and stability analyses of air bearings

Gang Lin, Ichiro Inasaki, Tojiro Aoyama, 1988 .

Evaluation of Sensor-less Identification Method for Stable Spindle Rotation against Chatter with Milling Simulation Analysis

Kouhei Ohnishi, Tojiro Aoyama, Ryo Koike, 2016 .

Disturbance Observer–Based In-process Detection and Suppression of Chatter Vibration

Kouhei Ohnishi, Tojiro Aoyama, Yasuhiro Kakinuma, 2012 .

Detection of chatter vibration in end milling applying disturbance observer

Yasuhiro Kakinuma, Tojiro Aoyama, Yui Sudo, 2011 .

Development of Fixture Devices for Thin and Compliant Workpieces

Yasuhiro Kakinuma, Tojiro Aoyama, Y. Kakinuma, 2005 .

Ultrafast Feed Drilling of Carbon Fiber-Reinforced Thermoplastics☆

Berend Denkena, Ryo Koike, Yasuhiro Kakinuma, 2015 .

Performances of HSK Tool Interfaces under High Rotational Speed

Tojiro Aoyama, Ichiro Inasaki, T. Aoyama, 2001 .

Ultrasonic Vibration and Cavitation-aided Micromachining of Hard and Brittle Materials

Yasuhiro Kakinuma, Tojiro Aoyama, Seiji Hamada, 2012 .

Development of a new lean lubrication system for near dry machining process

Yasuhiro Kakinuma, M. Yamashita, Tojiro Aoyama, 2008 .

A sensorless approach for tool fracture detection in milling by integrating multi-axial servo information

Kouhei Ohnishi, Tojiro Aoyama, Ryo Koike, 2016 .

Fabrication method for stainless steel foam block in directed energy deposition

T. Aoyama, Ryo Koike, M. Kondo, 2020 .

Evaluation for mechanical characteristics of Inconel625-SUS316L joint produced with direct energy deposition

Y. Kakinuma, T. Aoyama, Ryo Koike, 2017 .

Micro-electrical discharge machining of polycrystalline diamond using rotary cupronickel electrode

Tojiro Aoyama, Jiwang Yan, T. Aoyama, 2014 .

Evaluation of correlation between baseplate temperature and deposition properties in directed energy deposition

Y. Kakinuma, T. Aoyama, Ryo Koike, 2017 .

Drill fracture detection by integrating disturbance observer and rotational digital filter

Tojiro Aoyama, Ryo Koike, Yasuhiro Kakinuma, 2014 .

Monitoring of tool collision in drilling by disturbance observer

Tojiro Aoyama, Ryo Koike, Yasuhiro Kakinuma, 2014 .

Inprocess Detection of Drill Breakage with Acoustic Emission Signals

Ichiro Inasaki, Tojiro Aoyama, T. Aoyama, 1985 .

A basic study on metal foam fabrication with titanium hydride in direct energy deposition

Y. Kakinuma, T. Aoyama, Ryo Koike, 2018 .

Development of a mixture supply system for machining with minimal quantity lubrication

Tojiro Aoyama, T. Aoyama, 2002 .

Basic Study on Electro-Adhesive Surface Applying 3-Dimensional Micro Structures

Tojiro Aoyama, Ryo Koike, Yasuhiro Kakinuma, 2016, Int. J. Autom. Technol..

Estimation of Cutting Temperature in High-Feed-Speed Machining of Carbon Fiber-Reinforced Thermoplastics

Tojiro Aoyama, Ryo Koike, Yasuhiro Kakinuma, 2016, Int. J. Autom. Technol..

Basic study on Ultraprecision machining of Single-crystal Calcium Fluoride

Y. Kakinuma, T. Aoyama, Yuta Mizumoto, 2011 .

Electric Field-Assisted Glass Polishing Using Electro-Rheological Gel Pad

Yasuhiro Kakinuma, Tojiro Aoyama, Hidenobu Anzai, 2009 .