P. Kumta

P. Kumta, P. Kumta, J. Y. Kim, 1998, Proceedings of the IEEE 1998 National Aerospace and Electronics Conference. NAECON 1998. Celebrating 50 Years (Cat. No.98CH36185).

Effect of Incorporation of Nitrogen on the Structure and Dielectric Properties of Modified Oxide Sol‐Precipitated Borosilicate Glasses and Glass‐Ceramics

P. Kumta, K. Jinyong, R. Hsu, 1996 .

Si/TiN Nanocomposite Anodes by High‐Energy Mechanical Milling

P. Kumta, G. Blomgren, I. Kima, 2012 .

New Nanostructured Silicon and Titanium Nitride Composite Anodes for Li‐Ion Batteries

P. Kumta, G. Blomgren, II‐seok Kim, 2012 .

Pyrolysis of an alkyltin/polymer mixture to form a tin/carbon composite for use as an anode in lithium-ion batteries

P. Kumta, P. Patel, I. Kim, 2004 .

Synthesis and characterization of tin and antimony based composites derived by mechanochemical in situ reduction of oxides

P. Kumta, P. Patel, I. Kim, 2004 .

Hydrazide sol /gel process: A novel approach, for synthesizing nanostructured titanium nitride

P. Kumta, I. Kim, 2003 .

MODIFIED SOL-GEL BASED APPROACHES FOR SYNTHESIZING BOROPHOSPHOSILICATE GLASSES AND GLASS-CERAMICS

P. Kumta, J. Y. Kim, 1998 .

A novel reductive nitrogenation approach for synthesizing aluminum nitride powders

P. Kumta, J. Y. Kim, 1998 .

New molecular routes for synthesizing titanium disulfide

P. Kumta, M. Sriram, 1995 .

Computational and experimental investigation of Co and S-doped Ni2P as an efficient electrocatalyst for acid mediated proton exchange membrane hydrogen evolution reaction

P. Kumta, P. M. Shanthi, M. Datta, 2021, Catalysis Science & Technology.

Scaffoldless Tissue-engineered Dental Pulp Cell Constructs for Endodontic Therapy

P. Kumta, C. Sfeir, F. Syed-Picard, 2014, Journal of dental research.

Surface mediated non-viral gene transfection on titanium substrates using polymer electrolyte and nanostructured silicate substituted calcium phosphate pDNA (NanoSiCaPs) composites

P. Kumta, Boeun Lee, S. Shekhar, 2018, Materials Today Communications.

Highly Efficient Fluorine Doped Ni2P Electrocatalysts for Alkaline Mediated Oxygen Evolution Reaction

P. Kumta, P. M. Shanthi, M. Datta, 2021 .

Oxide and Nonoxide Ceramics, Synthesis of

P. Kumta, 2001 .

Si / TiN Nanocomposites Novel Anode Materials for Li ‐ Ion Batteries

P. Kumta, G. Blomgren, I. Kim, 1999 .

Microstructure of Mg–Zn–Ca thin film derived by pulsed laser deposition

P. Kumta, Daeho Hong, Sung-Jae Chung, 2011 .

Synthesis, characterization, and electrochemical studies of chemically synthesized NaFePO4

Daniel J. Haynes, A. Manivannan, P. Kumta, 2012 .

Low‐Temperature Chemical Approaches for Synthesizing Sulfides and Nitrides of Reactive Transition Metals

K. S. Weil, P. Kumta, K. Weil, 1997 .

Chemical synthesis of the high-pressure cubic-spinel phase of ZnIn2S4

P. Kumta, S. Misture, X. Wang, 1998 .

Synthesis of transition metal nitride powders and coatings using alkanolamine chelated precursors

P. Kumta, Kimberly Weil, 2001 .

Synthesis and Characterization of Nanostructured Niobium and Molybdenum Nitrides by a Two‐Step Transition Metal Halide Approach

D. Choi, P. Kumta, 2011 .

Amorphous Calcium Phosphate Blended Polymer Coatings for Biomedical Implants

P. Kumta, Boeun Lee, S. Desai, 2014 .

Nanostructured robust cobalt metal alloy based anode electro-catalysts exhibiting remarkably high performance and durability for proton exchange membrane fuel cells

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2015 .

Reversible high capacity nanocomposite anodes of Si/C/SWNTs for rechargeable Li-ion batteries

P. Kumta, Wei Wang, 2007 .

Synthesis, Structure, and Electrochemical Characterization of Nanocrystalline Tantalum and Tungsten Nitrides

D. Choi, P. Kumta, 2007 .

Particulate sol–gel synthesis and electrochemical characterization of LiMO2 (M=Ni, Ni0.75Co0.25) powders

P. Kumta, Chun-Chieh Chang, 1998 .

Vanadium nitride supercapacitors: Effect of Processing Parameters on electrochemical charge storage behavior

Prashanth Jampani Hanumantha, P. Kumta, M. Datta, 2016 .

Synthesis of nanoscale titanium nitride-tungsten nitride alloy powders using a novel complexed precursor

K. S. Weil, P. Kumta, K. Weil, 1999 .

Revisiting a Rare Intermetallic Ternary Nitride, Ni2Mo3N: Crystal Structure and Property Measurements

K. S. Weil, P. Kumta, K. Weil, 1999 .

A Complexed Sol-Gel (CSG) Approach to High Surface Area (HSA) Durable Ultra Active Platinum-Ruthenium Electro-Catalysts for Direct Methanol Fuel Cells

Prashanth Jampani Hanumantha, P. Kumta, J. Poston, 2014 .

Effect of boron on the stability of monoclinic NaMnO2: Theoretical and experimental studies

D. Choi, P. Kumta, O. Velikokhatnyi, 2006 .

Synthesis and electrochemical study of Mg 1.5 MnO 3 : A defect spinel cathode for rechargeable magnesium battery

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2015 .

Corrosion and bone healing of Mg-Y-Zn-Zr-Ca alloy implants: Comparative in vivo study in a non-immobilized rat femoral fracture model

P. Kumta, Boeun Lee, Daeho Hong, 2019, Journal of biomaterials applications.

Evaluation of magnesium alloys for use as an intraluminal tracheal for pediatric applications in a rat tracheal bypass model.

P. Kumta, T. Gilbert, Jingyao Wu, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys.

Boeun Lee, P. Kumta, Boeun Lee, 2016, Acta biomaterialia.

Nano-sized calcium phosphate (CaP) carriers for non-viral gene deilvery

P. Kumta, Donghyun Lee, K. Upadhye, 2012 .

Novel sol–gel derived calcium phosphate coatings on Mg4Y alloy

P. Kumta, Boeun Lee, M. Datta, 2011 .

Nanostructured ceramics in medical devices: Applications and prospects

Charles Sfeir, Daiwon Choi, D. Choi, 2004 .

Fluorine doped (Ir,Sn,Nb)O2 anode electro-catalyst for oxygen evolution via PEM based water electrolysis

Prashanth H. Jampani, P. Kumta, M. Datta, 2014 .

Synthesis of a New Ternary Nitride, Fe4W2N, with a Uniqueη-Carbide Structure

P. Kumta, K. Weil, P. N. Kumta, 1997 .

Structural Characterization of a Series of New Ternary η-Nitride Compounds

P. Kumta, K. Weil, 1997 .

Nanostructured calcium phosphates for biomedical applications: novel synthesis and characterization.

D. Choi, P. Kumta, C. Sfeir, 2005, Acta biomaterialia.

High performance robust F-doped tin oxide based oxygen evolution electro-catalysts for PEM based water electrolysis

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2013 .

Energetics of the lithium-magnesium imide–magnesium amide and lithium hydride reaction for hydrogen storage: An ab initio study

P. Kumta, O. Velikokhatnyi, 2007 .

Experimental and Theoretical Validation of High Efficiency and Robust Electrocatalytic Response of One-Dimensional (1D) (Mn,Ir)O2:10F Nanorods for the Oxygen Evolution Reaction in PEM-Based Water Electrolysis

P. Kumta, Susheng Tan, P. M. Shanthi, 2019, ACS Catalysis.

Fluorine substituted (Mn,Ir)O2:F high performance solid solution oxygen evolution reaction electro-catalysts for PEM water electrolysis

P. Kumta, P. M. Shanthi, M. Datta, 2017 .

A rapid solid-state synthesis of electrochemically active Chevrel phases (Mo6T8; T = S, Se) for rechargeable magnesium batteries

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2017, Nano Research.

Electrochemical Performance of Chemically and Solid State-Derived Chevrel Phase Mo6T8 (T = S, Se) Positive Electrodes for Sodium-Ion Batteries

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2015 .

Magnesium Phosphate Cement Systems for Hard Tissue Applications: A Review.

Prashant N. Kumta, Abhijit Roy, P. Kumta, 2016, ACS biomaterials science & engineering.

Non-aqueous chemical synthesis of tetragonal (β-La2S3) lanthanum sulfide powders

S. Risbud, P. Kumta, 1993 .

Thio sol-gel process for the synthesis of titanium disulfide

P. Kumta, M. Sriram, 1994 .

New Chemical Approaches to Synthesize Titanium Disulfide

P. Kumta, M. Sriram, 1993 .

Systematic Assessment of Synthesized Tri-magnesium Phosphate Powders (Amorphous, Semi-crystalline and Crystalline) and Cements for Ceramic Bone Cement Applications

P. Kumta, Abhijit Roy, Vidisha Sharma, 2015 .

In vivo monitoring the biodegradation of magnesium alloys with an electrochemical H2 sensor.

V. Shanov, W. Heineman, P. Kumta, 2016, Acta biomaterialia.

Synthesis, Osteoblast, and Osteoclast Viability of Amorphous and Crystalline Tri-Magnesium Phosphate.

P. Kumta, Boeun Lee, Daeho Hong, 2015, ACS biomaterials science & engineering.

Sol–gel synthesis and characterization of nanostructured hydroxyapatite powder

Prashant N. Kumta, Il-seok Kim, P. Kumta, 2004 .

In Vitro Biodegradation and In Vivo Biocompatibility of Forsterite Bio-Ceramics: Effects of Strontium Substitution.

P. Kumta, Boeun Lee, M. Roy, 2019, ACS biomaterials science & engineering.

Exploration of Amorphous and Crystalline Tri‐Magnesium Phosphates for Bone Cements

P. Kumta, Abhijit Roy, Vidisha Sharma, 2015 .

Chemical synthesis and characterization of magnesium substituted amorphous calcium phosphate (MG-ACP)

P. Kumta, Donghyun Lee, 2010 .

Reaction Kinetics and Mechanism of Formation of LiNiO2 from Particulate Sol‐Gel (PSG) Derived Precursors

P. Kumta, Z. G. Yang, J. Y. Kim, 2012 .

Implications of reaction mechanism and kinetics on the synthesis of stoichiometric LiNiO2

P. Kumta, Chun-Chieh Chang, J. Y. Kim, 2002 .

Novel Composite Polymer Electrolytes of PVdF-HFP Derived by Electrospinning with Enhanced Li-Ion Conductivities for Rechargeable Lithium–Sulfur Batteries

Prashanth Jampani Hanumantha, P. Kumta, P. M. Shanthi, 2018 .

Solution sol-gel synthesis and phase evolution studies of cordierite xerogels, aerogels and thin films

W. C. Johnson, P. Kumta, R. Hackenberg, 1994 .

Chemical synthesis and stabilization of magnesium substituted brushite

P. Kumta, Donghyun Lee, 2010 .

Synthesis, characterization, and in-vitro cytocompatibility of amorphous β-tri-calcium magnesium phosphate ceramics.

P. Kumta, I. Banerjee, Boeun Lee, 2016, Materials science & engineering. C, Materials for biological applications.

A study of strontium doped calcium phosphate coatings on AZ31.

P. Kumta, I. Banerjee, Boeun Lee, 2014, Materials science & engineering. C, Materials for biological applications.

Corrosion protection and improved cytocompatibility of biodegradable polymeric layer-by-layer coatings on AZ31 magnesium alloys.

P. Kumta, Boeun Lee, Abhijit Roy, 2013, Acta biomaterialia.

Effects of strontium-substitution in sputter deposited calcium phosphate coatings on the rate of corrosion of magnesium alloys

P. Kumta, B. Meenan, Zhigang Xu, 2021 .

Chemical synthesis of poly(lactic-co-glycolic acid)/hydroxyapatite composites for orthopaedic applications.

P. Kumta, K. Marra, Sarah E. Petricca, 2006, Acta biomaterialia.

Fast and Reversible Surface Redox Reaction in Nanocrystalline Vanadium Nitride Supercapacitors

Prashant N. Kumta, Daiwon Choi, D. Choi, 2006 .

MC3T3-E1 proliferation and differentiation on biphasic mixtures of Mg substituted β-tricalcium phosphate and amorphous calcium phosphate.

P. Kumta, I. Banerjee, Boeun Lee, 2014, Materials science & engineering. C, Materials for biological applications.

Mechanochemical synthesis of LiNiO2

P. Kumta, Chun-Chieh Chang, 2005 .

Synthesis and electrochemical characterization of LiMO2 (M=Ni, Ni0.75Co0.25) for rechargeable lithium ion batteries

P. Kumta, N. Scarr, C. Chang, 1998 .

A Versatile Chemical Strategy for Ultrafine AlN and Al-O-N Powders

S. Risbud, P. Kumta, B. Phillips, 2000 .

Chemical synthesis and characterization of lithium orthosilicate (Li4SiO4)

C. C. Wang, P. Kumta, C. Chang, 2001 .

An Alternative Chemical Route for the Synthesis and Thermal Stability of Chemically Enriched Hydroxyapatite

D. Choi, P. Kumta, 2006 .

Biomimetic Rotated Lamellar Plywood Motifs by Additive Manufacturing of Metal Alloy Scaffolds for Bone Tissue Engineering.

P. Kumta, Daeho Hong, Da-Tren Chou, 2017, ACS biomaterials science & engineering.

Exploring tin tantalates and niobates as prospective catalyst supports for water electrolysis

P. Kumta, O. Velikokhatnyi, 2009 .

Study of hMSC proliferation and differentiation on Mg and Mg-Sr containing biphasic β-tricalcium phosphate and amorphous calcium phosphate ceramics.

P. Kumta, Boeun Lee, Satish S. Singh, 2016, Materials science & engineering. C, Materials for biological applications.

Murine osteoblastic and osteoclastic differentiation on strontium releasing hydroxyapatite forming cements.

P. Kumta, Boeun Lee, Satish S. Singh, 2016, Materials science & engineering. C, Materials for biological applications.

Effect of zinc oxide doping on in vitro degradation of magnesium silicate bioceramics

P. Kumta, Boeun Lee, M. Roy, 2017 .

Structure and thermal stability of biodegradable Mg–Zn–Ca based amorphous alloys synthesized by mechanical alloying

P. Kumta, P. Saha, M. Datta, 2011 .

In Vivo Biocompatibility of Zinc-Doped Magnesium Silicate Bio-Ceramics.

P. Kumta, M. Roy, S. Nandi, 2018, ACS biomaterials science & engineering.

New Molecular Precursors from the Reaction of Hydrazine and Aluminum Alkoxide for the Synthesis of Powders in the Al−O−N System

S. Risbud, P. Kumta, B. Phillips, 1997 .

Chemically induced reduction: A viable process for synthesizing γ-TiAl based intermetallic matrix composite powders containing nanocrystalline TiC

P. Kumta, J. Y. Kim, Ki-Seog Chang, 2000 .

Interaction of solvent and the nature of adducts on the chemical synthesis of molybdenum nitride powders

E. I. Ko, P. Kumta, M. Sriram, 1995 .

Novel in-situ synthesis and characterization of nanostructured magnesium substituted β-tricalcium phosphate (β-TCMP)

P. Kumta, C. Sfeir, Donghyun Lee, 2009 .

Magnesium alloys as a biomaterial for degradable craniofacial screws.

Spandan Maiti, Siladitya Pal, P. Kumta, 2014, Acta biomaterialia.

A Review of PMMA Bone Cement and Intra-Cardiac Embolism

P. Kumta, S. Cho, A. Plakseychuk, 2016, Materials.

Visual H2 sensor for monitoring biodegradation of magnesium implants in vivo.

W. Heineman, P. Kumta, Daoli Zhao, 2016, Acta biomaterialia.

First-principles studies on alloying and simplified thermodynamic aqueous chemical stability of calcium-, zinc-, aluminum-, yttrium- and iron-doped magnesium alloys.

P. Kumta, O. Velikokhatnyi, 2010, Acta biomaterialia.

Anticorrosive Self-Assembled Hybrid Alkylsilane Coatings for Resorbable Magnesium Metal Devices.

P. Kumta, A. Patil, Susheng Tan, 2017, ACS biomaterials science & engineering.

Bioactive Synthetic Polymer-Based Polyelectrolyte LbL Coating Assembly on Surface Treated AZ31-Mg Alloys

P. Kumta, Boeun Lee, Joseph E Candiello, 2023, Journal of Functional Biomaterials.

Chemical synthesis of hydroxyapatite/poly(ε-caprolactone) composites

D. Choi, P. Kumta, K. Marra, 2004 .

The Spray Deposition of Transition Metal Nitride thin Films Using Alcohol Based Precursor Solutions

K. S. Weil, P. Kumta, K. Weil, 1997 .

Synthesis of ternary transition metal nitrides using chemically complexed precursors

Prashant N. Kumta, K. S. Weil, P. Kumta, 1996 .

A Complexed Precursor Approach To The Synthesis Of Ternary Transition Metal Nitrides

K. S. Weil, P. Kumta, K. Weil, 1995 .

Theoretical Study of Magnesium and Zinc Tantalates and Niobates as Prospective Catalyst Supports for Water Electrolysis

P. Kumta, Karan Kadakia, Sung-Kyoo Park, 2012 .

Chemical Synthesis and Structural Investigation of a New Ternary Nitride, CrWN2

K. S. Weil, P. Kumta, K. Weil, 1997 .

Synthesis and structural investigation of a new ternary transition metal nitride, Co3W3N

P. Kumta, K. Weil, 1998 .

Novel synthesis strategies for natural polymer and composite biomaterials as potential scaffolds for tissue engineering

P. Kumta, C. Sfeir, Hsu-Feng Ko, 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

A low temperature chemical approach using hydrazine to synthesize Mo2N powders

E. I. Ko, P. Kumta, M. Sriram, 1995 .

A Convenient Approach to Mo6S8 Chevrel Phase Cathode for Rechargeable Magnesium Battery

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2014 .

Expression of Phosphophoryn Is Sufficient for the Induction of Matrix Mineralization by Mammalian Cells*

P. Kumta, A. Boskey, C. Sfeir, 2011, The Journal of Biological Chemistry.

Alginate encapsulation of chitosan nanoparticles: a viable alternative to soluble chemical signaling in definitive endoderm induction of human embryonic stem cells.

P. Kumta, I. Banerjee, Joseph E Candiello, 2016, Journal of materials chemistry. B.

High performance fluorine doped (Sn,Ru)O2 oxygen evolution reaction electro-catalysts for proton exchange membrane based water electrolysis

Prashanth H. Jampani, P. Kumta, M. Datta, 2014 .

Novel (Ir,Sn,Nb)O2 anode electrocatalysts with reduced noble metal content for PEM based water electrolysis

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2012 .

Capsule stiffness regulates the efficiency of pancreatic differentiation of human embryonic stem cells.

P. Kumta, I. Banerjee, Joseph E Candiello, 2016, Acta biomaterialia.

Early differentiation patterning of mouse embryonic stem cells in response to variations in alginate substrate stiffness

P. Kumta, I. Banerjee, Joseph E Candiello, 2013, Journal of biological engineering.

Development of an Alginate Array Platform to Decouple the Effect of Multiparametric Perturbations on Human Pluripotent Stem Cells During Pancreatic Differentiation.

P. Kumta, I. Banerjee, Saik-Kia Goh, 2018, Biotechnology journal.

Inducing endoderm differentiation by modulating mechanical properties of soft substrates

P. Kumta, I. Banerjee, M. Jaramillo, 2015, Journal of tissue engineering and regenerative medicine.

Sol-Gel Processing of Glasses and Glass-Ceramics for Microelectronic Packaging

P. Kumta, M. Sriram, 1991 .

In-vivo efficacy of biodegradable ultrahigh ductility Mg-Li-Zn alloy tracheal stents for pediatric airway obstruction

P. Kumta, Boeun Lee, Ke Yang, 2020, Communications biology.

In-vivo efficacy of biodegradable ultrahigh ductility Mg-Li-Zn alloy tracheal stents for pediatric airway obstruction

P. Kumta, Boeun Lee, W. Wagner, 2020, Communications Biology.

Subglottic Stenosis: Development of a Clinically Relevant Endoscopic Animal Model

P. Kumta, L. Rigatti, L. Mady, 2020, Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.

Characterization of osteoblast-like behavior of cultured bone marrow stromal cells on various polymer surfaces.

P. Kumta, K. Marra, L. Weiss, 2000, Journal of biomedical materials research.

Effect of insertion of an elastic buffer layer on stability of patterned amorphous silicon thin film Li-ion anode

P. Kumta, S. Maiti, S. Pal, 2022, Silicon Anode Systems for Lithium-Ion Batteries.

Effect of silicon configurations on the mechanical integrity of silicon–carbon nanotube heterostructured anode for lithium ion battery: A computational study

P. Kumta, S. Maiti, S. Pal, 2016 .

Flexible sulfur wires (Flex-SWs)—A new versatile platform for lithium-sulfur batteries

Prashanth Jampani Hanumantha, P. Kumta, P. M. Shanthi, 2016 .

Nanoscale engineered electrochemically active silicon–CNT heterostructures-novel anodes for Li-ion application

P. Kumta, M. Datta, Rigved Epur, 2012 .

Vertically aligned silicon/carbon nanotube (VASCNT) arrays: Hierarchical anodes for lithium-ion battery

Wei Wang, P. Kumta, Rigved Epur, 2011 .

Amorphous silicon-carbon based nano-scale thin film anode materials for lithium ion batteries

Prashanth H. Jampani, P. Kumta, M. Datta, 2011 .

High Capacity, Reversible Silicon Thin-Film Anodes for Lithium-Ion Batteries

P. Kumta, J. Maranchi, A. Hepp, 2003 .

Modeling the delamination of amorphous-silicon thin film anode for lithium-ion battery

P. Kumta, S. Maiti, Siddharth Patel, 2014 .

Understanding the Origin of Irreversible Capacity loss in Non-Carbonized Carbonate − based Metal Organic Framework (MOF) Sulfur hosts for Lithium − Sulfur battery

Prashanth Jampani Hanumantha, P. Kumta, P. M. Shanthi, 2017 .

A simple facile approach to large scale synthesis of high specific surface area silicon nanoparticles

P. Kumta, M. Datta, Rigved Epur, 2013 .

Modeling of lithium segregation induced delamination of a-Si thin film anode in Li-ion batteries☆

P. Kumta, S. Maiti, S. Pal, 2013 .

Tin and graphite based nanocomposites: Potential anode for sodium ion batteries

P. Kumta, P. Saha, M. Datta, 2013 .

Guar gum: Structural and electrochemical characterization of natural polymer based binder for silicon–carbon composite rechargeable Li-ion battery anodes

Prashanth H. Jampani, P. Kumta, P. M. Shanthi, 2015 .

A Novel Sulforaphane-Regulated Gene Network in Suppression of Breast Cancer–Induced Osteolytic Bone Resorption

P. Kumta, Shivendra V. Singh, Boeun Lee, 2019, Molecular Cancer Therapeutics.

High energy density titanium doped-vanadium oxide-vertically aligned CNT composite electrodes for supercapacitor applications

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2015 .

CVD Derived Vanadium Oxide Nano-Sphere-Carbon Nanotube (CNT) Nano-Composite Hetero-Structures: High Energy Supercapacitors

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2013 .

Nanocrystalline TiN Derived by a Two-Step Halide Approach for Electrochemical Capacitors

D. Choi, P. Kumta, 2006 .

Chemically Synthesized Nanostructured VN for Pseudocapacitor Application

D. Choi, P. Kumta, 2005 .

Electrochemically active and robust cobalt doped copper phosphosulfide electro-catalysts for hydrogen evolution reaction in electrolytic and photoelectrochemical water splitting

Prashanth Jampani Hanumantha, P. Kumta, P. M. Shanthi, 2018 .

Nitrogen and cobalt co-doped zinc oxide nanowires – Viable photoanodes for hydrogen generation via photoelectrochemical water splitting ☆

Prashanth Jampani Hanumantha, A. Manivannan, P. Kumta, 2015 .

3D heterogeneous islet organoid generation from human embryonic stem cells using a novel engineered hydrogel platform.

Taraka Sai Pavan Grandhi, P. Kumta, I. Banerjee, 2018, Biomaterials.

Influence of Defects on Activity-Stability of Cu1.5Mn1.5O4 for Acid-Mediated Oxygen Evolution Reaction

P. Kumta, P. M. Shanthi, M. Datta, 2020, Journal of The Electrochemical Society.

Noble metal-free bifunctional oxygen evolution and oxygen reduction acidic media electro-catalysts

Prashanth H. Jampani, P. Kumta, P. M. Shanthi, 2016, Scientific Reports.

Nanostructured (Ir,Sn)O2:F – Oxygen Evolution Reaction Anode Electro-Catalyst Powders for PEM Based Water Electrolysis

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2014 .

A Sol-Gel-Based Approach to Synthesize High-Surface-Area Pt-Ru Catalysts as Anodes for DMFCs

P. Kumta, S. Narayanan, Chun-Chieh Chang, 2003 .

Cobalt based nanostructured alloys: Versatile high performance robust hydrogen evolution reaction electro-catalysts for electrolytic and photo-electrochemical water splitting

Prashanth Jampani Hanumantha, A. Manivannan, P. Kumta, 2017 .

Fluorine-Doped IrO2: A Potential Electrocatalyst for Water Electrolysis

P. Kumta, M. Datta, Karan Kadakia, 2013 .

Exploring calcium tantalates and niobates as prospective catalyst supports for water electrolysis

P. Kumta, O. Velikokhatnyi, 2012 .

Ab-initio study of fluorine-doped tin dioxide: A prospective catalyst support for water electrolysis

P. Kumta, O. Velikokhatnyi, 2010 .

Synthesis and characterization of electrochemically active graphite–silicon–tin composite anodes for Li-ion applications

P. Kumta, Nicolaus L. Rock, 2007 .

Nanostructured F doped IrO2 electro-catalyst powders for PEM based water electrolysis

Prashanth H. Jampani, P. Kumta, M. Datta, 2014 .

Regenerative Technologies for Craniomaxillofacial Surgery.

P. Kumta, C. Sfeir, B. Costello, 2015, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

26 Ceramic Materials for Lithium-Ion Battery Applications

P. Kumta, M. Datta, I. Kim, 2005 .

The thio-sol-gel synthesis of titanium disulfide and niobium disulfide. Part 1.–Materials chemistry

P. Kumta, M. Sriram, 1998 .

Novel three Dimensional Biodegradable Scaffolds for Bone Tissue Engineering

Lee E. Weiss, Prashant N. Kumta, Phil G. Campbell, 1998 .

Regenerative medicine for craniomaxillofacial surgery.

P. Kumta, C. Sfeir, B. Costello, 2010, Oral and maxillofacial surgery clinics of North America.

Recent advances in silicon materials for Li-ion batteries: Novel processing, alternative raw materials, and practical considerations

P. Kumta, Sourav Ghosh, S. Martha, 2022, Silicon Anode Systems for Lithium-Ion Batteries.

High performance and durable nanostructured TiN supported Pt 50 –Ru 50 anode catalyst for direct methanol fuel cell (DMFC)

Ayyakkannu Manivannan, Prashant N. Kumta, Moni Kanchan Datta, 2015 .

A Scientific Study of Current Collectors for Mg Batteries in Mg(AlCl2EtBu)2/THF Electrolyte

Ayyakkannu Manivannan, Prashant N. Kumta, Donghai Wang, 2013 .

Molybdenum doped bilayer photoanode nanotubes for enhanced photoelectrochemical water splitting

P. Kumta, M. Datta, O. Velikokhatnyi, 2021, International Journal of Hydrogen Energy.

Active and robust novel bilayer photoanode architectures for hydrogen generation via direct non-electric bias induced photo-electrochemical water splitting

Prashanth Jampani Hanumantha, P. Kumta, P. M. Shanthi, 2018, International Journal of Hydrogen Energy.

Vertically aligned nitrogen doped (Sn,Nb)O2 nanotubes – Robust photoanodes for hydrogen generation by photoelectrochemical water splitting

Prashanth Jampani Hanumantha, A. Manivannan, P. Kumta, 2016 .

* Programmed Platelet-Derived Growth Factor-BB and Bone Morphogenetic Protein-2 Delivery from a Hybrid Calcium Phosphate/Alginate Scaffold.

P. Kumta, E. Bayer, M. Fedorchak, 2017, Tissue engineering. Part A.

Biocompatible Sol–Gel Based Nanostructured Hydroxyapatite Coatings on Nano-porous SiC

W. J. Choyke, P. Kumta, P. Campbell, 2012 .

Cover Picture: Fast and Reversible Surface Redox Reaction in Nanocrystalline Vanadium Nitride Supercapacitors (Adv. Mater. 9/2006)

D. Choi, P. Kumta, G. Blomgren, 2006 .

Modified oxide sol-gel (MOSG) synthesis of borophosphosilicate glasses and glass-ceramics

P. Kumta, T. P. Feist, R. Hsu, 1995 .

In situ synthesis and characterization of porous polymer-ceramic composites as scaffolds for gene delivery

P. Kumta, C. Sfeir, Hsu-Feng Ko, 2007 .

Magnetic characteristics of a new cubic defect spinel Li0.5Mg0.5MnO3

A. Manivannan, P. Kumta, V. Singh, 2012 .

Constitutional under-potential plating (CUP) – New insights for predicting the morphological stability of deposited lithium anodes in lithium metal batteries

P. Kumta, P. M. Shanthi, Bharat Gattu, 2020 .

Exploration of Cation Substitution in the Layered Compound CrWN2

P. Kumta, K. Weil, J. Grins, 2002 .

Phase Stability and Electronic Structure of NaMnO2

P. Kumta, C. Chang, O. Velikokhatnyi, 2003 .

Microwave Derived Facile Approach to Sn/Graphene Composite Anodes for, Lithium-Ion Batteries

A. Manivannan, P. Kumta, Rigved Epur, 2014 .

Test-retest reproducibility of atomic force microscopy measurements of human trabecular meshwork stiffness

G. Wollstein, L. Kagemann, R. Bilonick, 2020, Modeling and Artificial Intelligence in Ophthalmology.

Platinum aptasensor wire arrays for cardiac biomarker detection

P. Kumta, R. Kormos, M. Patil, 2018, Materials Today Communications.

Modified Sol—Gel Based Approaches for Synthesizing Borophosphosilicates Glasses and Glass‐Ceramics.

P. Kumta, J. Y. Kim, 2010 .

3D printing of drug-eluting bioactive multifunctional coatings for orthopedic applications

P. Kumta, Boeun Lee, S. Desai, 2023, International journal of bioprinting.

Direct Writing of Polymeric Coatings on Magnesium Alloy for Tracheal Stent Applications

P. Kumta, S. Desai, Zhigang Xu, 2015, Annals of Biomedical Engineering.

Divalent cation incorporated Li(1+x)MMgxO2(1+x) (M=Ni0.75Co0.25): viable cathode materials for rechargeable lithium-ion batteries

P. Kumta, Chun-Chieh Chang, J. Y. Kim, 2000 .

Synthesis and Electrochemical Characterization of Divalent Cation‐Incorporated Lithium Nickel Oxide

P. Kumta, Chun-Chieh Chang, J. Y. Kim, 2000 .

Phase stability of Li(Mn100−xCox)O2 oxides: an ab initio study

P. Kumta, I. Abrikosov, L. Vitos, 2002 .

Effect of magnesium substitution in lithium nickel oxide: An ab initio study

P. Kumta, Chun-Chieh Chang, O. Velikokhatnyi, 2004 .

X-ray absorption and NMR studies of LiNiCoO{sub 2} cathodes prepared by a particulate sol-gel process

P. Kumta, S. Greenbaum, Y. Wang, 1997 .

Heterostructures for Improved Stability of Lithium Sulfur Batteries

Prashanth Jampani Hanumantha, P. Kumta, Bharat Gattu, 2014 .

The effect of temperature on the growth of carbon nanotubes on copper foil using a nickel thin film as catalyst

P. Kumta, Yifan Tang, Rigved Epur, 2011 .

First Principles Simulations of Phase Stability in Stoichiometric and Doped LiMnO 2

P. Kumta, R. Ahuja, Chun-Chieh Chang, 2001 .

High energy mechano-chemical milling: Convenient approach to synthesis of LiMn1.5Ni0.5O4 high voltage cathode for lithium ion batteries

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2014 .

Design and synthesis of hydroxyapatite composites containing an mPEG-dendritic poly(L-lysine) star polycaprolactone

Prashant N. Kumta, Kacey G. Marra, P. Kumta, 2004 .

Cell Derived Hierarchical Assembly of a Novel Phosphophoryn-Based Biomaterial

P. Kumta, C. Sfeir, Donghyun Lee, 2008, Cells Tissues Organs.

Computational Study on the Mechanical Stability of Novel Sn/C Composite Particulate Structure as Potential Anodes for Rechargeable Na Ion Battery

P. Kumta, S. Maiti, M. Datta, 2013 .

Summary of the panel discussions at the 2nd Symposium on Biodegradable Metals, Maratea, Italy, 2010

Andrej Atrens, Frank Witte, Mark P. Staiger, 2011 .

Visual Hydrogen Mapping Sensor for Noninvasive Monitoring of Bioresorbable Magnesium Implants In Vivo

W. Heineman, P. Kumta, Daoli Zhao, 2020 .

Theoretical and Experimental Strategies for New Heterostructures with Improved Stability for Rechargeable Lithium Sulfur Batteries

Prashanth Jampani Hanumantha, P. Kumta, P. M. Shanthi, 2020 .

Ferrocene and Inconel assisted growth of dense carbon nanotube forests on copper foils

P. Kumta, Rigved Epur, J. Gray, 2011 .

3D heterogeneous islet organoid generation from human embryonic stem cells using a novel engineered hydrogel platform.

Taraka Sai Pavan Grandhi, P. Kumta, I. Banerjee, 2018, Biomaterials.

Capsule stiffness regulates the efficiency of pancreatic differentiation of human embryonic stem cells.

P. Kumta, I. Banerjee, Thomas Richardson, 2016, Acta biomaterialia.

Study of fluorine doped (Nb,Ir)O2 solid solution electro-catalyst powders for proton exchange membrane based oxygen evolution reaction

Prashanth H. Jampani, A. Manivannan, P. Kumta, 2016 .

Scribable multi-walled carbon nanotube-silicon nanocomposites: a viable lithium-ion battery system.

Prashanth H. Jampani, P. Kumta, Bharat Gattu, 2015, Nanoscale.

Degrees of Inflammation in the Treatment of Subglottic Stenosis in a Rabbit Model: Histopathological Assessment of a Novel Bioabsorbable Ultra-high Ductility Magnesium Alloy Stent.

P. Kumta, A. Tobey, L. Mady, 2024, International journal of pediatric otorhinolaryngology.

Advances in Biomedical and Biomimetic Materials

W. R. Wagner, Prashant N. Kumta, Roger J. Narayan, 2009 .

Effects of Antimony Doping on Electronic Structure of SnO2

P. Kumta, A. Potekaev, S. Eremeev, 2004 .

Computational and Experimental Study of Fluorine Doped (Mn1–xNbx)O2 Nanorod Electrocatalysts for Acid-Mediated Oxygen Evolution Reaction

P. Kumta, Susheng Tan, P. M. Shanthi, 2019, ACS Applied Energy Materials.