Qin Shan

发表

State-of-the-art development of numerical simulations of phase change materials based systems

Liu Peng, Qin Shan, GU Xiaobin, 2018 .

The influence of different additives on microstructure and mechanical properties of aluminum titanate ceramics

Qin Shan, Anze Shui, Weiwei Chen, 2021 .

Template-free preparation of humidity self-regulating silica-based mesoporous oxide from volcanic ash

Qin Shan, Anze Shui, Shanjun Ke, 2020, Journal of Sol-Gel Science and Technology.

Oxidation behavior in wet oxygen environment of Al2O3 added reaction-sintered Si-B-C ceramics

Qin Shan, S. Dong, Jianbao Hu, 2018 .

More effective crack self‐healing capability of SiC f /SiC‐B 4 C with Al 2 O 3 modified under wet environment

Qin Shan, Anze Shui, Sheng Zeng, 2020 .

The Surface Cracking Resistance of Al2O3‐Modified SiCf/SiC‐B4C Composites after Cyclic Oxidation in Wet Environment

Qin Shan, S. Dong, Jinshan Yang, 2019, Advanced Engineering Materials.

Oxidation behavior of Al2O3 added reaction-sintered SiC ceramics in wet oxygen environment at 1300°C

Qin Shan, S. Dong, Jinshan Yang, 2018, Journal of Asian Ceramic Societies.

High pressure X-ray diffraction study of SrMnO3 perovskite

Qin Shan, K. Takumi, Liu Ying-xin, 2011 .

The influence of sintering temperature on the mechanical evolution of Al2TiO5 flexible ceramics based on the acoustic emission

Qin Shan, Anze Shui, Yudong Xue, 2021, Journal of Alloys and Compounds.

Damage development of a woven SiCf/SiC composite during multi-step fatigue tests at room temperature

Qin Shan, Long Li, S. Dong, 2020 .

Environmental Effects of Micro‐ and Ultra‐microchannel Structures of Natural Minerals

Qin Shan, Huang Shanshan, Lu Anhuai, 2006 .

Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites

Qin Shan, S. Dong, Jinshan Yang, 2019, Journal of Advanced Ceramics.

Pressure-induced phase transition of wulfenite

Qin Shan, L. Xiaodong, Liu Ying-xin, 2009 .

The oxidation resistance mechanism of SiC-B4C-xAl2O3 ceramics at 1400 ℃ in air atmosphere

Qin Shan, Anze Shui, Qiankun Xu, 2022, Journal of the European Ceramic Society.

The fabrication of porous mullite ceramics based on the different sizes of aluminum hydroxide

Qin Shan, Anze Shui, J. Lian, 2022, International Journal of Applied Ceramic Technology.

The influence of ZrO2 on the microstructure and mechanical properties of Al2TiO5 flexible ceramics

Qin Shan, Anze Shui, Qiankun Xu, 2022, Materials Characterization.

Influence of Cooling Rates on the Microstructure and Mechanical Properties of Aluminum Titanate Flexible Ceramic

Qin Shan, Anze Shui, Qiankun Xu, 2021, Advanced Engineering Materials.

The effect of Al2O3 on the high‐temperature oxidation resistance of Si‐B‐C ceramic under air atmosphere

Qin Shan, S. Dong, Jianbao Hu, 2018 .

Study on the Dolomitization and Dolostone Genesis

Qin Shan, 2010 .

High-strength building materials by recycling porcelain stoneware waste with aluminum powder

Qin Shan, Anze Shui, Bin Du, 2022, Journal of Cleaner Production.

The tensile damage behavior of SiC f /SiC–B 4 C after oxidation in wet atmosphere based on acoustic emission pattern recognition

Qin Shan, Anze Shui, Yudong Xue, 2021 .

A kinetic model involving oxidation and volatilization in SiC-B4C-xAl2O3 ceramics system

Qin Shan, Anze Shui, Qiankun Xu, 2022, Journal of the European Ceramic Society.

Foaming mechanism of polishing porcelain stoneware tile residues via adding C, Al and Si powder

Qin Shan, Anze Shui, Xiuan Xi, 2021, Journal of the European Ceramic Society.

Influence of boron nitride nanotubes on the damage evolution of SiCf/SiC composites

Qin Shan, S. Dong, Jinshan Yang, 2018, Journal of the European Ceramic Society.

Fabrication of foamed ceramics with enhanced compressive strength and low thermal conductivity via a simple route

Qin Shan, Anze Shui, Xiuan Xi, 2021, Materials Chemistry and Physics.

Acoustic emission and X-ray computed microtomography characterization of damage accumulation in a woven Cf/SiC composite

Qin Shan, S. Dong, Yudong Xue, 2019, Materials Characterization.

Errors involved in the taylor’s model for the crustal composition and evolution—an analysis of their causers

Qin Shan, Chen Yanjing, Zhao Yongchao, 1997 .

Effects of MgO and Fe2O3 additives on the microstructure and fracture properties of aluminium titanate flexible ceramics

Qin Shan, Anze Shui, Chao He, 2023, Ceramics International.

Investigation on the microcrcaks strengthening effect in the damage behavior of Al2TiO5 flexible ceramics based on the AE

Qin Shan, Anze Shui, Yudong Xue, 2021, Ceramics International.

Synthesis of Pb‐Feldspar by Ion Exchange Reaction and Its Implications

Qin Shan, Lu Anhuai, Liu Rui, 2006 .

Sintering Temperature Dependence of the Flexibility of ZrO2‐Modified Aluminum Titanate Flexible Ceramics

Qin Shan, Anze Shui, Chao He, 2023, Advanced Engineering Materials.

MDOxidation behavior in wet oxygen environment of Al2O3 modified SiCf/(SiC + B4C) at 1200 °C

Qin Shan, S. Dong, Jinshan Yang, 2018, Materials Letters.

Compressibility of Epidote up to 20 GPa at 298 K

Qin Shan, L. Jun, Wu Xiang, 2003 .