D. Smith

发表

Advanced Materials Research

H. Coules, D. Smith, K. Serasli, 2014 .

Three dimensional finite element prediction of crack closure and fatigue crack growth rate for a corner crack

Martyn J Pavier, S Simandjuntak, David J. Smith, 2006 .

Statistical analysis of the effects of prior load on fracture

D. Smith, J. Booker, D. Smith, 2007 .

Using local out-of-plane compression (LOPC) to study the effects of residual stress on apparent fracture toughness

D. Smith, A. Mahmoudi, C. Truman, 2008 .

Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs

P. J. Bouchard, David J. Smith, Lyndon Edwards, 2005 .

Three-dimensional mapping of the residual stress field in a locally rolled aluminium alloy specimen

P. Colegrove, H. Coules, D. Smith, 2017 .

EXPERIMENTAL MEASUREMENT AND FINITE ELEMENT SIMULATION OF THE INTERACTION BETWEEN RESIDUAL STRESSES AND MECHANICAL LOADING

C. A. McMahon, David J. Smith, Gholam Hossein Farrahi, 2001 .

The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading

M. Pavier, D. Smith, M. Ayatollahi, 2001 .

Mode I cracks subjected to large T-stresses

M. Pavier, D. Smith, M. Ayatollahi, 2002 .

A New Procedure to Measure Near Yield Residual Stresses Using the Deep Hole Drilling Technique

M. Pavier, D. Smith, D. Smith, 2009 .

The effect of cold expansion on fatigue crack growth from open holes at room and high temperature

M. J. Pavier, David J. Smith, V. Lacarac, 2001 .

Use of Elastic Follow-Up to Study the Effect of Displacement Controlled Loading on Plastic Collapse Pressures for Circumferentially Cracked Pipes

M. Pavier, D. Smith, Guiyi Wu, 2015 .

Effects of Load and Displacement Controlled Bending on Plastic Collapse of Pressurized Pipes

M. Pavier, D. Smith, Guiyi Wu, 2014 .

The influence of long-range residual stress on plastic collapse of pressurised pipes with and without flaws

M. Pavier, D. Smith, Guiyi Wu, 2013 .

A new method for assessing high-temperature crack growth

D. Smith, A. Fookes, 2005 .

Influence of prior cyclic hardening on high temperature deformation and crack growth in type 316L (N) stainless steel

D. Smith, S. Li, D. Smith, 1998 .

Estimating the creep-fracture mechanics parameter C [t] from uniaxial creep strain and rupture data

D. Smith, D. Smith, 1991 .

RATE-DEPENDENT DEFORMATION AND FRACTURE OF α-TITANIUM

D. Smith, R. Jones, 1991 .

An inverse approach to determination of residual stresses induced by shot peening in round bars

David J. Smith, Gholam Hossein Farrahi, S. A. Faghidian, 2009 .

The formation of fracture process zones in polygranular graphite as a precursor to fracture

D. Smith, D. Smith, P. Flewitt, 2012, Journal of Materials Science.

High Strain Biaxial Fatigue of a Structural Steel

D. Smith, G. Shatil, E. Ellison, 1994 .

Through thickness residual stresses in large rolls and sleeves for metal working industry

D. Smith, C. Truman, F. Hosseinzadeh, 2009 .

Prediction and Measurement of Through Thickness Residual stresses in Large Quenched Components

D. Smith, A. Mahmoudi, C. Truman, 2009 .

Modeling and Measurement of Residual Stresses in a Steel Vessel Containing Glass

D. Smith, B. Thomas, S. Nakhodchi, 2011 .

Approximating the upper bound in elastic stress intensity factor for a crack in an unknown residual stress field

H. Coules, D. Smith, D. Smith, 2015 .

A review of the changes of internal state related to high temperature creep of polycrystalline metals and alloys

D. Smith, D. Smith, P. Flewitt, 2015 .

HIGH TEMPERATURE FATIGUE‐CREEP BEHAVIOUR OF SINGLE CRYSTAL SRR90 NICKEL BASE SUPERALLOYS: PART 1—CYCLIC MECHANICAL RESPONSE

D. Smith, S. Li, 1995 .

Microstructural sensitivity of 316H austenitic stainless steel: Residual stress relaxation and grain boundary fracture

D. Smith, P. Flewitt, D. Smith, 2010 .

Application of multiple analysis methods in optimising complex residual stress characterisation

D. Smith, C. Truman, G. Zheng, 2017, Experimental Techniques.

Interpretation of residual stress distributions in previously loaded cracked beams

P. J. Webster, D. Smith, D. Smith, 1992 .

Measurement and Prediction of Residual Stresses in Quenched Stainless Steel Components

D. Smith, C. Truman, S. Hossain, 2014 .

Creep deformation and rupture of low alloy ferritic weldments under shear loading

David J. Smith, Ns Walker, D. Smith, 1996 .

Creep Damage Accumulation and Failure in Narrow Regions of Steel Welds

D. Smith, D. Smith, S. Kimmins, 2001 .

The ductile grinding of glass using diamond fibres oriented radially in a grinding wheel

David Smith, Michael N. R. Ashfold, D. Smith, 2003 .

Generation of residual stress and plastic strain in a fracture mechanics specimen to study the formation of creep damage in type 316 stainless steel

D. Smith, C. Truman, D. Smith, 2011 .

45th US Rock Mechanics / Geomechanics Symposium

M. Pavier, D. Smith, M. Ayatollahi, 2011 .

Validation of Mechanical Strain Relaxation Methods for Stress Measurement

D. Smith, D. Smith, D. Smith, 2013 .

Simulation and Measurement of Residual Stresses in a Type 316H Stainless Steel Offset Repair in a Pipe Girth Weld

D. Smith, C. Truman, M.S. Hossain, 2011 .

Residual Stress Distributions in Welded Ferritic Steel T-plate Joints

D. Smith, D. Stefanescu, N. O'Dowd, 2003 .

Statistical analysis of pipe girth weld experimental residual stress data

Michael Smith, Brahim Nadri, P. John Bouchard, 2014 .

Constitutive equations that describe creep stress relaxation for 316H stainless steel at 550°C

D. Smith, P. Flewitt, M. W. Spindler, 2011 .

The effect of specimen dimensions on mixed mode ductile fracture

M. Pavier, D. Smith, D. Smith, 2008 .

Uncertainties in Triaxial Residual Stress Measurements

D. Smith, E. Kingston, C. Truman, 2011 .

Measured and predicted residual stresses in thick section electron beam welded steels

Christopher M. Gill, D. Smith, E. Kingston, 2014 .

The Influence of Elastic Follow-Up on the Integrity of Structures

D. Smith, S. Hadidi-Moud, 2010 .

Spatial variation of residual stresses in a welded pipe for high temperature applications

M. Pavier, D. Smith, S. Simandjuntak, 2009 .

AN ANALYTICAL SOLUTION FOR INVERSE DETERMINATION OF RESIDUAL STRESS FIELD

S. A. Faghidian, D. Smith, G. Farrahi, 2012 .

Crack growth in brittle materials exhibiting primary creep

D. Smith, D. Smith, 1990 .

Asymmetric behaviour of fibrous metal matrix composites

M. Pavier, D. Smith, M. Pavier, 2001 .

Internal strains between grains during creep deformation of an austenitic stainless steel

D. Smith, D. Smith, S. Kabra, 2015, Journal of Materials Science.

A method for reconstruction of residual stress fields from measurements made in an incompatible region

H. Coules, D. Smith, C. Truman, 2014 .

Critical analysis of the prediction of stress relaxation from forward creep of Type 316H austenitic stainless steel

D. Smith, C. Truman, Yiqiang Wang, 2016 .

The maximum possible stress intensity factor for a crack in an unknown residual stress field

H. Coules, D. Smith, 2015 .

Proceedings of SEM Conference on Experimental and Applied Mechanics

D. Smith, D. Stefanescu, C. Truman, 2003 .

3D residual stresses around cold expanded holes in a new creep resistant aluminium alloy

M. Pavier, D. Smith, P. Holdway, 1970 .

Micro-mechanics of off-axis loading of metal matrix composites using finite element analysis

David J. Smith, Martyn J Pavier, Mohammad Mohammadi Aghdam, 2001 .

Finite element micromechanical modelling of yield and collapse behaviour of metal matrix composites

David J. Smith, Martyn J Pavier, Mohammad Mohammadi Aghdam, 2000 .

On the evaluation of the Bauschinger effect in an austenitic stainless steel—The role of multi-scale residual stresses

D. Smith, P. Flewitt, Jianan Hu, 2016 .

Quantifying internal stress and internal resistance associated with thermal ageing and creep in a polycrystalline material

David J. Smith, Jianan Hu, B Chen, 2014 .

Prediction and Measurement of Residual Stresses in Cladded Steel

D. Smith, D. Stefanescu, H. Hänninen, 2002 .

Novel Applications of the Deep-Hole Drilling Technique for Measuring Through-Thickness Residual Stress Distributions

Ej Kingston, David J. Smith, Christopher E Truman, 2006 .

MEASUREMENT OF THE TRANSVERSE LOCAL STRAIN RESPONSE OF SINGLE CRYSTAL SUPERALLOYS

D. Smith, S. Li, S. Han, 1999 .

Comparison of measured and modelled residual stresses in a welded P91 steel pipe undergoing post weld heat treatment

M. Pavier, D. Smith, A. Becker, 2020, International Journal of Pressure Vessels and Piping.

Impact of residual stress and elastic follow-up on fracture

S. Hadidi-Moud, Christopher E Truman, D. Smith, 2007 .

Measurement of Internal Stress and Internal Resistance Resulting from Creep of Type 316H Stainless Steel

D. Smith, Bo Chen, 2013 .

Self-consistent Modelling and the Evaluation of Lattice Deformation in a Polycrystalline Austenitic Stainless Steel

D. Smith, P. Flewitt, Jianan Hu, 2015 .

A Self-consistent Model in the Local Residual Stress Evaluation of 316 H Stainless Steel

D. Smith, P. Flewitt, Jianan Hu, 2013 .

Comparison of phenomenological and crystallographic models for single crystal nickel base superalloys. I. Analytical identification

D. Smith, Shuxin Li, Songlin Han, 2001 .

Comparison of phenomenological and crystallographic models for single crystal nickel base superalloys. II. Numerical simulations

D. Smith, Shuxin Li, Songlin Han, 2001 .

Prediction and measurement of residual stresses in quenched stainless-steel spheres

Sayeed Hossain, Mark R. Daymond, David J. Smith, 2004 .

An Inverse Method for Reconstruction of the Residual Stress Field in Welded Plates

David J. Smith, Gholam Hossein Farrahi, S A Faghidian, 2010 .

An optimisation study of the modified deep-hole drilling technique using finite element analyses applied to a stainless steel ring welded circular disc

D. Smith, E. Kingston, C. Truman, 2017 .

Development of an anisotropic constitutive model for single crystal superalloy for combined fatigue and creep loading

D. Smith, S. Li, 1998 .

Obtaining multiaxial residual stress distributions from limited measurements

C. A. McMahon, David J. Smith, Gholam Hossein Farrahi, 2001 .

Measurement of residual stress in thick section composite laminates using the deep-hole method

Ej Kingston, David J. Smith, Martyn J Pavier, 2005 .

Creep deformation and stress relaxation of a martensitic P92 steel at 650 °C

D. Smith, C. Truman, P. Flewitt, 2017 .

Creep Deformation and Stress Relaxation of a Martensitic P92 Steel at 650C

D. Smith, C. Truman, P. Flewitt, 2017 .

Micromechanical Modelling Of Metal Matrix Composites Subjected To Combined Thermal And Shear Loading

M. Pavier, D. Smith, M. M. Aghdam, 1998 .

Application of quenching to create highly triaxial residual stresses in type 316H stainless steels

Sayeed Hossain, Mark R. Daymond, David J. Smith, 2006 .

Determination of T-stress from finite element analysis for mode I and mixed mode I/II loading

Majid R. Ayatollahi, David J. Smith, Martyn J Pavier, 1998 .

Reconstruction of residual stresses in autofrettaged thick-walled tubes from limited measurements

David J. Smith, Gholam Hossein Farrahi, S A Faghidian, 2009 .

Measurement of residual stresses in aluminium alloy aerospace components

D. Smith, C. Truman, E. Kingston, 2006 .

Benchmark measurement of residual stresses in a 7449 aluminium alloy using deep-hole and incremental centre-hole drilling methods

Sayeed Hossain, David J. Smith, Christopher E Truman, 2011 .

The effects of warm pre-stressing on cleavage fracture. Part 1: evaluation of experiments

S Hadidi-Moud, David J. Smith, D. Smith, 2004 .

Comparison of Methods for Predicting the Influence of Residual Stresses on Brittle Fracture

D. Smith, A. Mirzaee-Sisan, Saeid Hadidi-Moud, 2007 .

Application of the Local Approach to Predict Load History Effects in Ferritic Steels

David J. Smith, Christopher E Truman, A Mirzaee-Sisan, 2005 .

Predicting How Crack Tip Residual Stresses Influence Brittle Fracture

S Hadidi-Moud, Christopher E Truman, A Mirzaee-Sisan, 2002 .

A method for selecting macro-scale structures with axially loaded members

Damiano Pasini, Stuart C Burgess, David J. Smith, 2007 .

A general solution to the material performance index for bending strength design

Stuart C Burgess, David J. Smith, Kazem Alemzadeh, 2006 .

Analysis of increasing torque with recurrent slip in interference-fits

Alexander M. Korsunsky, Xu Song, Julian D Booker, 2016 .

Residual stresses created during curing of a polymer matrix composite using a viscoelastic model

M. Pavier, D. Smith, Shuxin Li, 2016 .

Weld residual stresses near the bimetallic interface in clad RPV steel: A comparison between deep-hole drilling and neutron diffraction data

M. N. James, D. Smith, K. Serasli, 2014 .

The effects of long-range residual stress, elastic follow-up and applied load on creep crack incubation and material toughness

D. Smith, A. Shirahatti, 2015 .

A New Method of Introducing Long Range Residual Stresses to Study Creep Crack Initiation

D. Smith, C. Truman, Y. Q. Wang, 2013 .

Crack-tip constraint in mode II deformation

Majid R. Ayatollahi, David J. Smith, Martyn J Pavier, 2002 .

On the use of displacement extrapolation to obtain crack tip singular stresses and stress intensity factors

David J. Smith, D. Smith, W. Zhu, 1995 .

A Theoretical Study on the Effect of Residual Stress on Creep Brittle Crack Growth

D. Smith, A. Cocks, 1991 .

A comparison of two and three-dimensional analyses of fatigue crack closure

D. A. Hills, David Nowell, M. J. Pavier, 2007 .

Measurement, analysis and reconstruction of residual stresses

D. Smith, G. Farrahi, D. Goudar, 2012 .

S69 Residual Stress Measurements in Steel Beams Using the Incremental Slitting Technique

D. Smith, M. Prime, A. Shterenlikht, 2008, Powder Diffraction.

Inelastic Deformation and Elastic Follow-Up

D. Smith, C. Truman, Yiqiang Wang, 2013 .

Influence of thermal ageing on the creep behaviour of a P92 martensitic steel

D. Smith, C. Truman, P. Flewitt, 2017 .

A finite element simulation of the cold working process for fastener holes

Cgc Poussard, David J. Smith, Martyn J Pavier, 1997 .

A new procedure based on Sachs’ boring for measuring non-axisymmetric residual stresses

M. J. Pavier, David J. Smith, A. A. Garcia-Granada, 2000 .

Fatigue crack growth from plain and cold expanded holes in aluminium alloys

David J. Smith, Martyn J Pavier, V. Lacarac, 2000 .

A local approach to cleavage fracture in ferritic steels following warm pre‐stressing

S Hadidi-Moud, David J. Smith, Christopher E Truman, 2004 .

The effects of warm pre-stressing on cleavage fracture. Part 2: finite element analysis

D. Smith, H. Fowler, Saeid Hadidi-Moud, 2004 .

Predicting the Influence of Residual Stresses on Brittle Fracture Using Local Approach

S Hadidi-Moud, A Mirzaee-Sisan, D. Smith, 2008 .

Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components

C. McMahon, D. Smith, W. Zhu, 2001 .

Residual stresses in clad nuclear reactor pressure vessel steels; prediction, measurement and reconstruction

H. Coules, D. Smith, K. Serasli, 2015 .

Residual Stress Measurement within a European UIC60 Rail Using Integrated Drilling Techniques

D. Smith, D. Stefanescu, C. Truman, 2003 .

Upper Bound Estimates of the Contribution of an Unknown Residual Stress Field to Stress Intensity Factor

H. Coules, D. Smith, 2015 .

Finite element validation of the deep hole drilling method for measuring residual stresses

Sayeed Hossain, David J. Smith, Christopher E Truman, 2012 .

The effect of plasticity on the ability of the deep hole drilling technique to measure axisymmetric residual stress

David J. Smith, Martyn J Pavier, Christopher E Truman, 2011 .

Modelling and Measuring Residual Stresses in Pipe Girth Welds: Lessons From the Style Framework 7 Project

David J. Smith, Michael Smith, Ondrej Muránsky, 2014 .

Characterising Residual Stresses in a Dissimilar Metal Electron Beam Welded Plate

D. Smith, C. Truman, K. A. Venkata, 2015 .

Effect of residual stress around cold worked holes on fracture under superimposed mechanical load

Cgc Poussard, David J. Smith, Martyn J Pavier, 1999 .

Numerical Reconstruction of Residual Stress Fields from Limited Measurements

H. Coules, D. Smith, K. Serasli, 2014 .

Finite Element Validation of the over-Coring Deep-Hole Drilling Technique

D. Smith, E. Kingston, C. Truman, 2011 .

Simulation and Measurement of Residual Stresses in a Type 316H Stainless Steel Offset Repair in a Pipe Girth Weld

D. Smith, C. Truman, M.S. Hossain, 2006 .

A statistical framework for analysing weld residual stresses for structural integrity assessment

Christopher E Truman, P. J. Bouchard, Brahim Nadri, 2008 .

PREDICTION OF CREEP CRACK INITIATION UNDER THE INTERACTION BETWEEN LONG RANGE RESIDUAL STRESS AND APPLIED LOAD

D. Smith, C. Truman, Y. Q. Wang, 2013 .

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Martyn J Pavier, David Smith, Mahmoud Mostafavi, 2009 .

MANUFACTURE AND PERFORMANCE OF DIAMOND-COATED THERMOCOUPLES

D. Smith, M. Ashfold, T. Pearce, 1999 .

Mixed Mode Brittle and Ductile Fracture of a High Strength Rotor Steel at Room Temperature

D. Smith, M. Ayatollahi, T. Swankie, 1998 .

Residual Stress Evaluation of Dissimilar Weld Joint Using Reactor Vessel Outlet Nozzle Mock-Up Model: Report 2

D. Smith, E. Kingston, K. Ogawa, 2009 .

An Experimental Procedure to Determine the Interaction between Applied Loads and Residual Stresses

D. Smith, M. Peel, Shu Yan Zhang, 2013 .

Evaluation of non-uniform cooling effects for air-cooled forgings

C. McMahon, D. Smith, M. Tierney, 2004 .

Application of the modified deep hole drilling technique (iDHD) for measuring near yield non-axisymmetric residual stresses

David J. Smith, Martyn J Pavier, Christopher E Truman, 2009 .

Predictions and measurements of residual stress in repair welds in plates

David J. Smith, Ted Brown, T. A. Dauda, 2006 .

Life Prediction of Notched Specimens Using Multiaxial Surface and Subsurface Strain Analyses

D. Smith, G. Shatil, 1996 .

Critical examination of parameters for predicting creep crack growth

D. Smith, G. Webster, E. Ellison, 2013 .

Prediction of fatigue crack growth rates using crack closure finite element analysis

M. Pavier, D. Smith, S. Simandjuntak, 2007 .

Proceedings of the Asian-Pacific Conference on Fracture and Strength (APCFS'04), Jeju Island, Korea