Deug-Woo Lee

发表

Microstructure of fast tool servo machining on copper alloy

Hong Lu, Soo-chang Choi, Sang Min Lee, 2012 .

Compensation for five DOF motion errors of hydrostatic feed table by utilizing actively controlled capillaries

Deug-Woo Lee, Chun-Hong Park, Yoon-Jin Oh, 2006 .

Measurement of Five DOF Motion Errors in the Ultra Precision Feed Tables

Deug-Woo Lee, Chun-Hong Park, Yoon-Jin Oh, 2006 .

Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motors

Deug-Woo Lee, Sang-Moon Hwang, B. Kang, 2001 .

Pulse electrochemical polishing for microrecesses based on a coulostatic analysis

Deug Woo Lee, Deug-Woo Lee, Jeong-Woo Park, 2009 .

Modeling and machining evaluation of microstructure fabrication by fast tool servo-based diamond machining

Deug-Woo Lee, Hong Lu, Deug-Woo Lee, 2014 .

Analysis of harmonic distortion due to uneven magnetic field in a micro-speaker used for mobile phones

Sang-Moon Hwang, Beom-Soo Kang, Deug-Woo Lee, 2002 .

Mechanical Approach to Nanomachining of Silicon Using Oxide Characteristics Based on Tribo Nanolithography (TNL) in KOH Solution

Deug-Woo Lee, N. Morita, N. Kawasegi, 2004 .

The possibility of multi-layer nanofabrication via atomic force microscope-based pulse electrochemical nanopatterning

Deug-Woo Lee, N. Morita, M. Jun, 2017, Nanotechnology.

Surface patterning for brittle amorphous material using nanoindenter-based mechanochemical nanofabrication.

Soo-chang Choi, Deug-Woo Lee, Y. W. Kim, 2008, Nanotechnology.

Improving the efficiency of a dye-sensitized solar cell with a reflex condenser system.

Soo-chang Choi, Deug-Woo Lee, Jong-Man Kim, 2012, Optics express.

Inclined-wall regular micro-pillar-arrayed surfaces covered entirely with an alumina nanowire forest and their improved superhydrophobicity

Deug-Woo Lee, S. Kim, C. Cho, 2011 .

Evaluation of characteristics for dye-sensitized solar cell with reflector applied.

Soo-chang Choi, Deug-Woo Lee, Sang-min Lee, 2011, Optics express.

Development of a high-efficiency laminated dye-sensitized solar cell with a condenser lens.

Soo-chang Choi, Deug-Woo Lee, Sang-min Lee, 2011, Optics express.

Manufacturing and characterization of physically modified aluminum anodes based air battery with electrolyte circulation

Simon S. Park, Deug-Woo Lee, C. Yim, 2017, International Journal of Precision Engineering and Manufacturing-Green Technology.

Effect of TiO2 nanoparticle-accumulated bilayer photoelectrode and condenser lens-assisted solar concentrator on light harvesting in dye-sensitized solar cells

Ji Hoon Kim, Deug-Woo Lee, Ji Young Ahn, 2013, Nanoscale Research Letters.

Cerebral angiography using transauricular access in a rabbit model: a new technique

Deug-Woo Lee, B. Jhun, Jin-Wook Yoo, 2020, Acta radiologica.

Highly flexible, transparent and self-cleanable superhydrophobic films prepared by a facile and scalable nanopyramid formation technique.

Ji Hoon Kim, Jong-Kweon Park, Deug-Woo Lee, 2014, Nanoscale.

Influence of multiple ultrasonic impact treatments on surface roughness and wear performance of SUS301 steel

Deug-Woo Lee, Liang Li, M. Bae, 2016 .

Effect of oxidizer nanostructures on propulsion forces generated by thermal ignition of nano-aluminum-based propellants.

Ji Hoon Kim, Deug-Woo Lee, S. Kim, 2013, Journal of nanoscience and nanotechnology.

Tribonanolithography of silicon in aqueous solution based on atomic force microscopy

Noboru Morita, Deug Woo Lee, Noritaka Kawasegi, 2004 .

A simple route to morphology-controlled polydimethylsiloxane films based on particle-embedded elastomeric masters for enhanced superhydrophobicity.

Jong-Kweon Park, Deug-Woo Lee, Jong-Man Kim, 2014, ACS applied materials & interfaces.

A study on micro-grooving characteristics of planar lightwave circuit and glass using ultrasonic vibration cutting

Yoong-Ho Jung, Deug-Woo Lee, Woo-Seop Chung, 2002 .

Study on surface modification of aluminum 6061 by multiple ultrasonic impact treatments

Liang Li, Mi-Ru Kim, Deug-Woo Lee, 2018 .

A two-step periodic micro-nano patterning process via ultrasonic impact treatment on a rough SUS301 stainless steel surface

Deug-Woo Lee, Jaebeom Lee, Liang Li, 2017 .

Attaching single carbon nanotube on tip's apex using dielectrophoresis of DC-pulse voltage

Deug-Woo Lee, Heejeong Jeong, Yoongho Jung, 2009 .

Aero-sol–gel synthesis and photovoltaic properties of mesoporous TiO2 nanoparticles

C. Y. Cho, Whi Dong Kim, Deug-Woo Lee, 2012 .

Generation of filament-winding paths for complex axisymmetric shapes based on the principal stress field

Yoong-Ho Jung, Jaedeuk Yun, Deug-Woo Lee, 2017 .

Surface Characteristics based on Material and Process Changes in Surface Treatment using Fast Tool Servo

Deug Woo Lee, Jong-Man Kim, Seung-Jun Lee, 2015 .

Simple and cost-effective fabrication of highly flexible, transparent superhydrophobic films with hierarchical surface design.

Jong-Kweon Park, Deug-Woo Lee, Jaebeom Lee, 2015, ACS applied materials & interfaces.

Effects of micro textured sapphire tool regarding cutting forces in turning operations

Chaneel Park, Yuan Wei, Simon S. Park, 2017 .

Improving efficiency of dye-sensitized solar cell by micro reflectors

Beom-Soo Kang, Yong-Woo Kim, Deug-Woo Lee, 2015 .

Characteristics of machined surface controlled by cutting tools and conditions in machining of brittle material

Soo-chang Choi, Deug-Woo Lee, Yong Woo Kim, 2009 .

Measurement of cemented carbide-PCD microdrill geometry error based on computer vision algorithm

Deug-Woo Lee, kang-Seok Kim, Seung-jun Lee, 2022, Measurement.

Effect on friction reduction of micro/nano hierarchical patterns on sapphire wafers

Sang Min Lee, Deug-Woo Lee, Y. W. Kim, 2017 .

A Study on the Influence of Waviness Error to a Hydrostatic Bearing for a Crankshaft Pin Turner

Yang Hyup Ha, Deug Woo Lee, Seung-Jun Lee, 2013 .

Indirect tool monitoring in drilling based on gap sensor signal and multilayer perceptron feed forward neural network

Siti Nurfadilah Binti Jaini, Deug-Woo Lee, Seung-Jun Lee, 2020, Journal of Intelligent Manufacturing.

DRY ETCHING OF SnO2 AND ZnO FILMS IN HALOGEN-BASED INDUCTIVELY COUPLED PLASMAS

Deug-Woo Lee, Jong Cheon Park, Jin Kon Kim, 2011 .

Turbulent Lubrication Theory Using Algebraic Reynolds Stress Model in Finite Journal Bearings with Cavitation Boundary Conditions

Deug-Woo Lee, Kyung-Woong Kim, 1990 .

Development of Dye-Sensitized Solar Cell for High Conversion Efficiency

Deug-Woo Lee, Yong-woo Kim, 2011 .

Motion Error Compensation Method for Hydrostatic Tables Using Actively Controlled Capillaries

Deug-Woo Lee, Chun-Hong Park, Yoon-Jin Oh, 2006 .