C. Chao

发表

Hexagonal microlens array modeling and fabrication using a thermal reflow process

Che-Ping Lin, Hsiharng Yang, C. Chao, 2003 .

Mechanical tests and finite element models for bone holding power of tibial locking screws.

C. Chao, S. Hou, Jaw-Lin Wang, 2004, Clinical biomechanics.

Increase of pullout strength of spinal pedicle screws with conical core: Biomechanical tests and finite element analyses

C. Chao, S. Hou, Jaw-Lin Wang, 2005, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Rigid stamp indentation for a thermoelastic half-plane

C. Chao, B. Gao, 2000 .

On the general treatment of multiple inclusions in antiplane elastostatics

C. Chao, C. Young, 1998 .

Thermodynamic Derivation in Magneto-Electro-Elasticity

C. Chao, O. P. Niraula, 2012 .

Thermal/mechanical damage of 6061-T6 aluminum tensile specimen

C. Chao, G. Sih, F. Lieu, 1987 .

Control relevant issues in semiconductor manufacturing : Overview with some new results

Cheng-Ching Yu, Ching-Kong Chao, Hsiao-Ping Huang, 2007 .

(Journal of Micromechanics and Microengineering,13(5):748-757)A new microlens array fabrication method using UV proximity printing

Ching-Kong Chao, Hsiharng Yang, Che-Ping Lin, 2003 .

Influence of load amplitude and uniaxial tensile properties on fatigue crack growth

C. Chao, G. Sih, 1984 .

A thin cracked layer bonded to an elastic half-space under an antiplane concentrated load

C. Chao, B. Kao, 1997 .

Micro-ball lens array modeling and fabrication using thermal reflow in two polymer layers

Ching-Kong Chao, Hsiharng Yang, Sheng-Chih Shen, 2004 .

New dual-curvature microlens array with high fill-factor for organic light emitting diode modules

Hsiharng Yang, C. Chao, Tsung-Hung Lin, 2012, 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS.

Effects of Hole Transport and Injection Layers on the Efficiency of Flexible Organic Light emitting Diodes

C. Chao, S. Cai, R. Chang, 2015 .

OPTIMAL DISTAL SCREW ALIGNMENT IN THE GAMMA NAIL

C. Chao, Po-Quang Chen, Chun-Ching Hsiao, 2002 .

Investigation and Evaluation of Pyroelectric Materials for Thermal Energy Harvesting

C. Chao, C. Hsiao, An-Shen Siao, 2019, physica status solidi (a).

Effects of internal stresses on the mechanical properties of deposition thin films

C. T. Chuang, C. Chao, R. Chang, 2008 .

Pyroelectric waste heat energy harvesting using the Olsen cycle on Pb(Zr, Ti)O3-Pb(Ni, Nb)O3ceramics

C. Chao, Laurent Pilon, C. Hsiao, 2018, Journal of Applied Physics.

ANALYTICAL SOLUTIONS AND NUMERICAL EXAMPLES FOR THERMOELASTIC INTERFACE CRACK PROBLEMS IN DISSIMILAR ANISOTROPIC MEDIA

C. Chao, R. Chang, 1994 .

Interfacial stresses of a coated polygonal hole subject to a point heat source

C. Chao, W. Chiu, S. Tseng, 2020 .

Interfacial Stresses of a Coated Square Hole Induced by a Remote Uniform Heat Flow

C. Chao, S. Tseng, F. M. Chen, 2020 .

Microcrack propagation induced by dynamic infiltration of calcium-magnesium-alumino-silicate in columnar structures for thermal barrier coatings

C. Chao, Weixu Zhang, Xueling Fan, 2020, Journal of the Chinese Institute of Engineers.

Effects of different interlayers on indium-tin oxide thin films sputtered on flexible PET substrates

C. Chao, R. Chang, C. Chao, 2011 .

Residual stresses and mechanical properties of a ZnO pyroelectric sensor

C. Chao, Yuh-Chung Hu, C. Hsiao, 2009 .

Analytical solutions to a coated triangle hole embedded in an infinite plate under a remote uniform heat flow

C. Chao, S. Tseng, F. M. Chen, 2018, Journal of Thermal Stresses.

Interaction between a Nonuniformly Coated Circular Inclusion and a Remote Uniform Heat Flow

C. Chao, L. M. Lu, F. Chen, 2012 .

An exact solution for thermal stresses in a three-phase composite cylinder under uniform heat flow

C. Chao, M. Shen, F. M. Chen, 2007 .

Effects of a viscoelastic substrate on a cracked body under in-plane concentrated loading

C. Chao, S. Wang, R. Chang, 2001 .

Thermal Stresses in a Generally Anisotropic Body With an Elliptic Inclusion Subject to Uniform Heat Flow

C. Chao, M. Shen, 1998 .

General solution to the hygrothermoelastic interface problem with discontinuity between dissimilar anisotropic media

C. Chao, R. Chang, 1993 .

Solutions of a Crack Interacting with Tri-MaterialComposite in Plane Elasticity

C. Chao, A. Wikarta, 2013 .

Explicit Solutions for the Antiplane Problem of Bonded Dissimilar Materials with Two Concentric Circular-Arc Inclusions

C. Chao, S. P. Wu, 1995 .

Circular-Arc Inclusion at Isotropic Bimaterial Interface

C. Chao, M. Shen, 1995 .

The Inversion and Kelvin's Transformation in Plane Thermoelasticity with Circular or Straight Boundaries

C. H. Wu, C. Chao, K. Ting, 2018 .

Stress Analysis of an Infinite Plate with a Coated Elliptic Hole Under a Remote Uniform Heat Flow

C. Chao, F. M. Chen, F. M. Chen, 2008 .

On Approximate Solutions for Two-Dimensional Thermoelastic Problems with a Nearly Circular Hole

C. Chao, Chung-Hao Wang, 2003 .

On Perturbation Solutions for Nearly Circular Inclusion Problems in Plane Thermoelasticity

C. Chao, C. Wang, 2002 .

On Bonded Circular Inclusions in Plane Thermoelasticity

C. Chao, M. Shen, 1997 .

Effect of hydride embrittlement on creep life of spent fuel cladding

C. Chao, Kuo-ching Yang, C. Tseng, 2011 .

Damage evaluation of cladding integrity for spent fuel in interim storage

C. Chao, T. Lin, M. Chern, 2009 .

Creep crack growth on spent fuel zircaloy cladding in interim storage

C. Chao, K. C. Yang, C. Tseng, 2007 .

Stability of failure initiation by fracture for a bimaterial body with an edge crack

C. Chao, J. Shie, 1990 .

Thermal stress analysis for rapid thermal process with convective cooling

C. Chao, S. Hung, 2005 .

A novel fabrication method of micro-needle mold by using the micro-lens mask through contact printing

C. Chao, S. Hung, Tsung-Hung Lin, 2014, Microsystem Technologies.

Failure initiation in unnotched specimens subjected to monotonic and cyclic loading

G. C. Sih, C. Chao, G. Sih, 1984 .

Increasing bending strength of tibial locking screws: mechanical tests and finite element analyses.

Ching-Kong Chao, Ching-Chi Hsu, Jinn Lin, 2007, Clinical biomechanics.

Pushout strength of tibial locking screws: Development of finite element models

C. Chao, S. Hou, Jaw-Lin Wang, 2003 .

Notch sensitivity jeopardizes titanium locking plate fatigue strength.

C. Chao, Wo-Jan Tseng, Jinn Lin, 2016, Injury.

Hydride effect on crack instability of Zircaloy cladding

C. Chao, Mingni Sun, Mingwu Sun, 2014 .

Fabrication of a microlens array electroformed mold with low roughness and high hardness

Hsiharng Yang, C. Chao, S. Hung, 2007 .

Stress analysis of an inclusion layer bonded to an irregularly shaped pore under an edge dislocation or a concentrated load

C. Chao, S. Tseng, Y. Liao, 2022, Journal of Mechanics.

Stress Field for a Coated Triangle-Like Hole Problem in Plane Elasticity

C. Chao, S. Tseng, F. M. Chen, 2020 .

The Stress Field Due to an Edge Dislocation Interacting With Two Circular Inclusions

C. Chao, T. Lin, F. M. Chen, 2017 .

Interaction of an edge dislocation with a coated elliptic inclusion

C. Chao, F. Chen, Chin-Kun Chen, 2011 .

Circularly cylindrical layered media in plane elasticity

C. Chao, M. Shen, F. M. Chen, 2006 .

Screw head plugs increase the fatigue strength of stainless steel, but not of titanium, locking plates

C. Chao, J. Lin, L. Hung, 2018, Bone & Joint Research.

Effects of merged holes, partial thread removal, and offset holes on fatigue strengths of titanium locking plates.

C. Chao, Jinn Lin, Balraj Muthusamy, 2022, Clinical biomechanics.

Contradictory working length effects in locked plating of the distal and middle femoral fractures-a biomechanical study.

C. Chao, Jinn Lin, Jian-ming Wu, 2020, Clinical biomechanics.

Half-threaded holes markedly increase the fatigue life of locking plates without compromising screw stability

C. Chao, Jinn Lin, You-Lin Chen, 2020, Bone & joint research.

Analysis of compressive strength and subsidence of a vertebral body cage with Taguchi methods

C. Chao, Ching-Chi Hsu, Y. Tsai, 2010 .

Parametric study on the interface pullout strength of the vertebral body replacement cage using FEM-based Taguchi methods.

Ching-Kong Chao, Ching-Chi Hsu, Wen-Hsien Hsu, 2009, Medical engineering & physics.

Rupture of spent fuel Zircaloy cladding in dry storage due to delayed hydride cracking

Ching-Kong Chao, C. Chao, K. C. Yang, 2008 .

Comparison study of the pullout strength of conventional spinal pedicle screws and a novel design in full and backed-out insertions using mechanical tests

C. Chao, Jinn Lin, Y. Amaritsakul, 2014, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Increasing Bending Strength and Pullout Strength in Conical Pedicle Screws: Biomechanical Tests and Finite Element Analyses

Ching-Kong Chao, Ching-Chi Hsu, Jinn Lin, 2008, Journal of spinal disorders & techniques.

Biomechanical evaluation of bending strength of spinal pedicle screws, including cylindrical, conical, dual core and double dual core designs using numerical simulations and mechanical tests.

C. Chao, Jinn Lin, Y. Amaritsakul, 2014, Medical engineering & physics.

Biomechanical comparisons of different posterior instrumentation constructs after two-level ALIF: a finite element study.

C. Chao, Ching-Chi Hsu, Shang-Chih lin, 2010, Medical engineering & physics.

Fabrication of high-resolution periodical structure on polymer waveguides using a replication process.

Wei-Ching Chuang, Ching-Kong Chao, Chi-Ting Ho, 2007, Optics express.

Transducing Mechanical Forces Using a Polymer Optical Grating Sensor

C. Chao, W. Chuang, R. Shyu, 2006 .

The Optimum Cage Position and Orientation on the ALIF with Facet Screw Fixation: A Finite Element Analysis and the Taguchi Method

C. Chao, Ching-Chi Hsu, K. Chao, 2011 .

APPLICATIONS OF FINITE ELEMENT ANALYSES-BASED TAGUCHI METHODS FOR SUBSIDENCE PROBLEM OF VERTEBRAL BODY CAGES USED IN CERVICAL SPINE

C. Chao, Jinn Lin, Ching-Chi Hsu, 2013 .

A new novel means of transducing tensile stresses

C. Chao, W. Chuang, R. Shyu, 2005 .

Green's function for a point heat source embedded in an infinite body with two circular elastic inclusions

C. Chao, T. Lin, F. M. Chen, 2018 .

Biomechanical analysis of distal radius fractures using intramedullary Kirschner wires.

C. Chao, T. Lu, Shang-Chih lin, 2009, Medical engineering & physics.

Hygrothermal stresses for a plane crack in a generally anisotropic plate

C. Chao, R. Chang, 1993 .

Thermal stresses induced by a remote uniform heat flow interacting with two circular inclusions

C. Chao, T. Lin, F. M. Chen, 2017 .

Anti-plane interaction of a crack and reinforced elliptic hole in an infinite matrix

C. Chao, A. Korsunsky, A. Wikarta, 2010 .

Analytical solution for a reinforcement layer bonded to an elliptic hole under a remote uniform load

C. K. Chen, C. Chao, L. M. Lu, 2009 .

Thermal stresses in a viscoelastic trimaterial

C. Chao, 2010 .

Interaction between a Crack and an Isotropic Tri-Material Media in Anti-Plane Elasticity

C. Chao, A. Wikarta, 2014 .

Anti-Plane Interaction between a Crack and an Elliptically Cylindrical Layered Media

C. Chao, A. Wikarta, 2013 .

On multiple circular inclusions in plane thermoelasticity

C. Chao, M. Shen, C. Fung, 1997 .

Interaction between a crack and a circular elastic inclusion under remote uniform heat flow

J. Y. Lee, C. Chao, 1996 .

Antiplane interaction of an anisotropic elliptic inclusion with an arbitrarily oriented crack

C. Chao, T. F. Chiang, 1996 .

Steady-state heat conduction problem of the interface crack between dissimilar anisotropic media

R. C. Chang, C. Chao, C. K. Chao, 1993 .

Thermal stresses in a viscoelastic three-phase composite cylinder

C. T. Chuang, C. Chao, R. Chang, 2007 .

Green's Functions for a Point Heat Source in Circularly Cylindrical Layered Media

C. Chao, M. Shen, F. M. Chen, 2006 .

Thermal stresses in an isotropic trimaterial interacted with a pair of point heat source and heat sink

C. Chao, F. M. Chen, 2004 .

Stress analysis of an elastic cracked layer bonded to a viscoelastic substrate

C. Chao, R. Chang, C. Hsiao, 2004 .

Mixed boundary-value problems of two-dimensional anisotropic thermoelasticity with elliptic boundaries

C. Chao, B. Gao, 2001 .

Green's Function for a Point Heat Source in an Anisotropic Body Containing an Elliptic Hole or a Rigid Inclusion

C. Chao, Chung-Hao Wang, 1999 .

Thermal stresses in an infinite body with a partially reinforced elliptic hole ‐ a type of mixed boundary‐value problem

C. Chao, Chung-Hao Wang, S. Tsai, 1999 .

Crack trajectories influenced by mechanical and thermal disturbance in anisotropic material

C. Chao, R. Chang, 1992 .

Mode-III Stress Intensity Factors of a Three-Phase Composite with an Eccentric Circular Inclusion

C. Chao, A. Wikarta, 2012 .

Interacting circular inclusions in antiplanepiezoelectricity

C. Chao, K. Chang, 1999 .

Explicit solutions for the elastic and thermoelastic fields with a rigid circular-arc inclusion

C. Chao, M. Shen, 1994 .

Solutions of a crack interacting with a three-phase composite in plane elasticity

C. Chao, A. Wikarta, 2016 .

Solutions of thermoelastic crack problems in bonded dissimilar media or half-plane medium

C. Chao, M. Shen, 1995 .

Mode-III stress intensity factors for two circular inclusions subject to a remote uniform shear load

C. Chao, S. Tseng, F. M. Chen, 2018, Journal of the Chinese Institute of Engineers.

Antiplane Interaction of a Crack with a Circular Inclusion in an Elastic Half-Plane

C. Chao, C. Young, 1998 .

Mode-III Stress Intensity Factors of an Arbitrarily Oriented Crack Crossing Interface in a Layered Structure

C. Chao, L. M. Lu, L. M. Lu, 2013 .

Thermoelastic interaction between a hole and an elastic circular inclusion

C. Chao, T. Heh, 1999 .

Explicit Solutions of Plane Elastostatics Problems in Heterogeneous Solids

C. Chao, B. Gao, 1998 .

Boundary Integral Equations for Notch Problems in Plane Thermoelasticity

C. Chao, 1997 .

Thermal stresses in a viscoelastic trimaterial with a combination of a point heat source and a point heat sink

C. T. Chuang, C. Chao, R. Chang, 2008 .

High fill-factor microlens array mold insert fabrication using a thermal reflow process

Ching-Kong Chao, Hsiharng Yang, Che-Ping Lin, 2004 .

On the General Solutions for Annular Problems With a Point Heat Source

C. Chao, C. Tan, 2000 .

Thermal interface crack problems in dissimilar anisotropic media

C. Chao, R. Chang, 1992 .

THERMOELASTIC PROBLEM OF CURVILINEAR CRACK WITH A POINT HEAT SOURCE

C. Chao, L. Y. Kuo, 1994 .

EXPLICIT SOLUTIONS FOR CURVILINEAR CRACKS IN THE THERMOELASTIC MEDIUM

C. Chao, M. Shen, 1993 .

Analytical Exact Solutions of Heat Conduction Problems for a Three-Phase Elliptical Composite

C. Chao, F. Chen, Chin-Kun Chen, 2009 .

Thermal problem of curvilinear cracks in bonded dissimilar materials with a point heat source

C. Chao, L. Y. Kuo, 1993 .

Thermal problem of curvilinear cracks in bonded dissimilar materials

C. Chao, M. Shen, 1993 .

Study on Pyroelectric Harvesters with Various Geometry

Chun-Ching Hsiao, An-Shen Siao, Ching-Kong Chao, 2015, Sensors.

Modification of the screw hole structures to improve the fatigue strength of locking plates

C. Chao, Jinn Lin, Chen-Huei Lin, 2018, Clinical biomechanics.

Notch sensitivity of titanium causing contradictory effects on locked nails and screws.

C. Chao, Jinn Lin, Ching-Chi Hsu, 2010, Medical engineering & physics.

Comparison of multiple linear regression and artificial neural network in developing the objective functions of the orthopaedic screws

Ching-Chi Hsu, Jinn Lin, Ching-Kong Chao, 2011, Comput. Methods Programs Biomed..

Fractographic identification of fracture origin mainly controlled by the intensity of singular stress field (ISSF) in prismatic butt joint with corner fillet

C. Chao, N. Noda, Y. Sano, 2021 .

A Strip Cell in Pyroelectric Devices

Chun-Ching Hsiao, An-Shen Siao, Ching-Kong Chao, 2016, Sensors.

New horizontal frustum optical waveguide fabrication using UV proximity printing

Tsung-Hung Lin, Ching-Kong Chao, Ruey-Fang Shyu, 2008, ArXiv.

Stress analysis in the vertical Bridgman growth with the modified thermal boundary condition

C. Chao, S. Hung, 2003 .

High-frequency resonant characteristics of triple-layered piezoceramic bimorphs determined using experimental measurements and theoretical analysis

C. Chao, Yu-Hsi Huang, Chien-Ching Ma, 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

Depositing High-Performance Conductive Thin Films by Using Atomic Layer Deposition

C. Chao, R. Chang, F. Tsai, 2015 .

Size effect of cylindrical specimens with fatigue cracks

C. Chao, G. Sih, 1984 .

Improving socket design to prevent difficult removal of locking screws.

C. Chao, Jinn Lin, Chen-Huei Lin, 2018, Injury.

Contact stresses in an infinite plate containing a smooth circular insert under thermal load

C. Chao, F. M. Chen, 2004 .

5685 - ON THE ENERGY RELEASE RATE OF FINITE CRACKED BODIES

C. Chao, R. Chang, 2013 .

Application of energy density theory on finite cracked bodies

C. Chao, R. Chang, 2004 .

Failure prediction of a plate weakened by an elliptic hole under thermal or mechanical load

C. Chao, Jaw-Lin Wang, 1993 .

Contact stresses in an infinite plate containing a rigid circular inclusion under thermal loads

C. Chao, K. Chang, 2001 .

Boundary integral equations for notch problems in an anisotropic half-space

C. Chao, C. Hsiao, 2000 .

Thermoelastic contact between a flat punch and an anisotropic half-space

C. Chao, B. Gao, S. P. Wu, 1999 .

Indentation Problems of Two-Dimensional Anisotropic Thermoelasticity With Perturbed Boundaries

C. Chao, B. Gao, 2003 .

Stress intensity factors of two bonded half-plane problem with a point heat source

C. K. Chao, S. J. Chen, C. Chao, 1996 .

Parametric Study on Bone Screw Designs for Holding Power

C. K. Chao, C.-C. Hsiao, C. Chao, 2006 .

Damage evaluation of two-layer targets impacted by a projectile

C. K Chao, R. C Chang, C. Chao, 2000 .

Failure stability of a cracked layer between dissimilar materials

C. Chao, C. K. Chao, S. Y. Lin, 1990 .

Characterization of oxide barrier layers prepared by atomic layer deposition

Fa-Ta Tsai, Ching-Kong Chao, Kai-Jyun Jhong, 2017 .

Stress intensity factors for fibrous composite with a crack embedded in an infinite matrix under a remote uniform load

C. Chao, T. Lin, F. M. Chen, 2017 .

Scaling of size/time/temperature — Part 2: Progressive damage in uniaxial compressive specimen

C. Chao, G. Sih, 1989 .

Fabrication of microlens array with graduated sags using UV proximity printing method

C.-P. Lin, H. Yang, C.-K. Chao, 2005 .

Biomechanical influence of pin placement and elbow angle on joint distraction and hinge alignment for an arthrodiatasis elbow–pin–fixator construct

Ching-Kong Chao, Kao-Shang Shih, Chang-Yuan Fan, 2012, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Finite Element Analysis for the Treatment of Proximal Femoral Fracture

C. Chao, J. Lin, Ching-Chi Hsu, 2009 .

Deep drawing of plastically and incrementally deformed circular cylindrical cup

C. Chao, G. Sih, C. Liu, 1991 .

Springback in cold metal-forming of AOOH steel: nonhomogeneous deformation

C. Chao, G. Sih, Y. Hwu, 1990 .

Fatigue failure initiation analysis of wing/fuselage bolt assembly

G. C. Sih, C. K. Chao, C. Chao, 1989 .

Antiplane problem of curvilinear cracks in bonded dissimilar materials

C. Chao, W. Huang, 1993 .

Stress intensity factors for cusp-type crack problem under mechanical and thermal loading

C. Chao, N. Noda, C. Chiu, 2021, Journal of Mechanics.

The Effect of Lamps Radius on Thermal Stresses for Rapid Thermal Processing System

Cheng-Ching Yu, Ching-Kong Chao, Shih-Yu Hung, 2003 .

Thermal stress analysis for rapid thermal processor

Cheng-Ching Yu, Ching-Kong Chao, Shih-Yu Hung, 2003 .

Lamp design for fast cooling of rapid thermal processes with a two-zone lamp using a step cooling process

C. Chao, S. Hung, C. Hsu, 2004 .

Fabrication of optical filters based on polymer asymmetric Bragg couplers.

An-Chen Lee, C. Chao, W. Chuang, 2009, Optics express.

Fabrication of High Aspect Ratio Periodical Structure on Metal Using an Electroforming Process

C. Chao, W. Chang, W. Chuang, 2007 .

New fabrication method for micro-pyramidal vertical probe array for probe cards

Hsiharng Yang, C. Chao, Mau-Shiun Yeh, 2009, 2009 Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS.

Multiobjective Optimization Design of Spinal Pedicle Screws Using Neural Networks and Genetic Algorithm: Mathematical Models and Mechanical Validation

Ching-Kong Chao, Jinn Lin, Yongyut Amaritsakul, 2013, Comput. Math. Methods Medicine.