P. Qiao

发表

Impact Mechanics and High-Energy Absorbing Materials: Review

P. Qiao, Mijia Yang, F. Bobaru, 2008 .

Developing Connections for Longitudinal Joints between Deck Bulb Tees - Development of UHPC Mixes with Local Materials

Pizhong Qiao, Zhidong Zhou, Srinivas Allena, 2016 .

A systematic analysis and design approach for single-span FRP deck/stringer bridges

P. Qiao, J. Davalos, B. Brown, 2000 .

Experimental Damage Identification of Carbon/Epoxy Composite Beams Using Curvature Mode Shapes

Gangbing Song, Pizhong Qiao, Cole S. Hamey, 2004 .

Curvature mode shape-based damage detection in composite laminated plates

Pizhong Qiao, Jialai Wang, Wahyu Lestari, 2007 .

Active vibration control of a smart pultruded fiber-reinforced polymer I-beam

Gangbing Song, Pizhong Qiao, Vineet Sethi, 2004 .

Probabilistic damage modeling and service-life prediction of concrete under freeze–thaw action

P. Qiao, Fangliang Chen, 2015 .

Novel Laplacian scheme and multiresolution modal curvatures for structural damage identification

M. Cao, P. Qiao, 2009 .

Curvature Mode Shape-based Damage Assessment of Carbon/Epoxy Composite Beams

S. Hanagud, P. Qiao, W. Lestari, 2007 .

Mechanics of Composite Sinusoidal Honeycomb Cores

P. Qiao, Jialai Wang, 2005 .

Fatigue Life Prediction of Pultruded E-glass/Polyurethane Composites

P. Qiao, Mijia Yang, 2006 .

Vibration of beams with arbitrary discontinuities and boundary conditions

Pizhong Qiao, Jialai Wang, P. Qiao, 2007 .

Dynamics-based Damage Identification

Pizhong Qiao, Wei Fan, P. Qiao, 2013 .

Improved Damage Detection for Beam-type Structures using a Uniform Load Surface

Pizhong Qiao, Jialai Wang, P. Qiao, 2007 .

A strain energy-based damage severity correction factor method for damage identification in plate-type structures

Pizhong Qiao, Wei Fan, P. Qiao, 2012 .

On irregularity-based damage detection method for cracked beams

Pizhong Qiao, Jialai Wang, P. Qiao, 2008 .

Postbuckling of buried geodesically-stiffened pipelines under combined external pressure and axial compression

P. Qiao, Zhimin Li, 2015 .

MITIGATION STRATEGIES FOR EARLY-AGE SHRINKAGE CRACKING IN BRIDGE DECKS

P. Qiao, D. Mclean, Jia-Xiang Zhuang, 2010 .

A state-based peridynamic model for quantitative fracture analysis

Pizhong Qiao, Heng Zhang, P. Qiao, 2018, International Journal of Fracture.

Actuating and sensing mechanism of embedded piezoelectric transducers in concrete

P. Qiao, Linjun Lu, Haifan Yu, 2020, Smart Materials and Structures.

Assessment of wave modulus of elasticity of concrete with surface-bonded piezoelectric transducers

P. Qiao, Linjun Lu, Haifan Yu, 2020 .

Durability and Smart Condition Assessment of Ultra-High Performance Concrete in Cold Climates

P. Qiao, S. Allena, Zhidong Zhou, 2016 .

4. TITLE AND SUBTITLE

P. Qiao, Fangliang Chen, 2012 .

SEISMIC PERFORMANCE AND SMART HEALTH MONITORING OF CONCRETE WITH RECYCLED AGGREGATE Part I: Smart Health Monitoring of Concrete with Recycled Aggregate

P. Qiao, 2010 .

Waveform fractal dimension for mode shape-based damage identification of beam-type structures

Pizhong Qiao, Maosen Cao, M. Cao, 2008 .

A novel C1 continuity finite element based on Mindlin theory for doubly-curved laminated composite shells

P. Qiao, Zhimin Li, Sun Jin, 2021 .

Impact analysis of fiber reinforced polymer honeycomb composite sandwich beams

P. Qiao, Mijia Yang, 2007 .

Polarization-multiplexed broadband hologram on all-dielectric metasurface

P. Qiao, Xiulun Yang, G. Dong, 2018, EPL (Europhysics Letters).

Vibration analysis of laminated composite plates with damage using the perturbation method

P. Qiao, Jifeng Xu, Zhen-xin Wang, 2015 .

Electromechanical Behavior of Interface Deformable Piezoelectric Bilayer Beams

P. Qiao, Fangliang Chen, 2010 .

Thermal postbuckling analysis of anisotropic laminated beams with different boundary conditions resting on two-parameter elastic foundations

P. Qiao, Zhimin Li, Zhi-min Li, 2015 .

On an exact bending curvature model for nonlinear free vibration analysis shear deformable anisotropic laminated beams

Pizhong Qiao, Zhi-Min Li, P. Qiao, 2014 .

Elastic local buckling of periodic sinusoidal corrugated composite panels subjected to in-plane shear

P. Qiao, S. Pathirana, 2020 .

Local buckling analysis of periodic sinusoidal corrugated composite panels under uniaxial compression

P. Qiao, S. Pathirana, 2019, Composite Structures.

Failure analysis of plates with singular and non-singular stress raisers by a coupled peridynamic model

P. Qiao, Linjun Lu, Heng Zhang, 2019, International Journal of Mechanical Sciences.

Buckling and postbuckling of anisotropic laminated cylindrical shells under combined external pressure and axial compression in thermal environments

P. Qiao, Zhimin Li, 2015 .

Torsion of honeycomb FRP sandwich beams with a sinusoidal core configuration

P. Qiao, J. Davalos, Vinod Ramayanam, 2009 .

Explicit local buckling analysis of rotationally restrained composite plates under uniaxial compression

P. Qiao, Luyang Shan, L. Shan, 2008 .

Variational Principles in Stability Analysis of Composite Structures

P. Qiao, Luyang Shan, 2005 .

Buckling and postbuckling behavior of shear deformable anisotropic laminated beams with initial geometric imperfections subjected to axial compression

P. Qiao, Zhimin Li, Zhi-min Li, 2015 .

Flexural behaviour of GFRP-encased concrete panels

P. Qiao, Qinghui Liu, Zheng Lu, 2018, Magazine of Concrete Research.

Dynamics-based Damage Detection of Composite Laminated Beams using Contact and Noncontact Measurement Systems

P. Qiao, W. Lestari, Jialai Wang, 2007 .

On the improved dynamic analysis of delaminated beams

P. Qiao, Fangliang Chen, 2012 .

and Noncontact Measurement Systems Dynamics-based Damage Detection of Composite Laminated Beams using Contact

P. Qiao, W. Lestari, Jialai Wang, 2007 .

Peridynamic modeling of elastic bimaterial interface fracture

P. Qiao, Yan Liu, Heng Zhang, 2022, Computer Methods in Applied Mechanics and Engineering.

On the computation of energy release rates by a peridynamic virtual crack extension method

P. Qiao, Heng Zhang, 2020 .

A state-based peridynamic model for quantitative elastic and fracture analysis of orthotropic materials

P. Qiao, Heng Zhang, 2019, Engineering Fracture Mechanics.

An improved peridynamic approach for quasi-static elastic deformation and brittle fracture analysis

Pizhong Qiao, Dan Huang, Guangda Lu, 2015 .

A stability-enhanced peridynamic element to couple non-ordinary state-based peridynamics with finite element method for fracture analysis

P. Qiao, C. Su, Yijia Dong, 2020 .

Mechanics and fracture of crack tip deformable bi-material interface

Pizhong Qiao, Jialai Wang, P. Qiao, 2004 .

Buckling Analysis of Bilayer Beam-columns with an Asymmetric Delamination

P. Qiao, Qinghui Liu, 2018 .

Mixed mode fracture characterization of GFRP-concrete bonded interface using four-point single leg bending test

P. Qiao, Linjun Lu, Qinghui Liu, 2018, Engineering Structures.

Mixed mode fracture characterization of GFRP-concrete bonded interface using four-point asymmetric end-notched flexure test

P. Qiao, Qinghui Liu, 2017 .

Energy release rate of beam-type fracture specimens with hygrothermal influence

P. Qiao, Qinghui Liu, 2016 .

An improved four-parameter model with consideration of Poisson’s effect on stress analysis of adhesive joints

P. Qiao, Wensheng Jiang, 2015 .

On the intralaminar and interlaminar stress analysis of adhesive joints in plated beams

P. Qiao, Fangliang Chen, 2012 .

Buckling of delaminated bi-layer beam-columns

P. Qiao, Fangliang Chen, 2011 .

On the Compliance and Energy Release Rate of Generically-unified Beam-type Fracture Specimens

P. Qiao, Fangliang Chen, 2011 .

Fracture characterization of Carbon fiber-reinforced polymer-concrete bonded interfaces under four-point bending

P. Qiao, Fangliang Chen, Lei Zhang, 2011 .

Local Delamination Buckling of Laminated Composite Beams Using Novel Joint Deformation Models

P. Qiao, Jialai Wang, Fangliang Chen, 2010 .

Analysis of Unified Beam-Type Fracture Specimens

P. Qiao, Fangliang Chen, 2010 .

On the Study of Interface Crack in Layered Piezoelectric Structures

P. Qiao, Fangliang Chen, 2010 .

Interface crack between two interface deformable piezoelectric layers

P. Qiao, Fangliang Chen, 2009 .

An improved adhesively bonded bi-material beam model for plated beams

P. Qiao, Fangliang Chen, 2008 .

Interface Stress Distribution in FRP-Strengthened Concrete Beams

P. Qiao, Fangliang Chen, 2008 .

Fracture Analysis of Shear Deformable Bi-Material Interface

P. Qiao, Jialai Wang, 2006 .

Analysis of beam-type fracture specimens with crack-tip deformation

P. Qiao, Jialai Wang, 2005 .

Novel Bi-layer Beam Theories for Delamination Fracture Analysis

P. Qiao, Jialai Wang, 2005 .

Novel joint deformation models and their application to delamination fracture analysis

P. Qiao, Jialai Wang, 2005 .

Analysis of tapered ENF specimen and characterization of bonded interface fracture under Mode-II loading

P. Qiao, J. Davalos, Jialai Wang, 2003 .

Tapered beam on elastic foundation model for compliance rate change of TDCB specimen

P. Qiao, J. Davalos, Jialai Wang, 2003 .

Interface crack between two shear deformable elastic layers

P. Qiao, Jialai Wang, 2004 .

Novel beam analysis of end notched flexure specimen for mode-II fracture

P. Qiao, Jialai Wang, 2004 .

Buckling and Postbuckling of Anisotropic Laminated Doubly Curved Panels under Lateral Pressure

P. Qiao, Zhimin Li, Tao Liu, 2021 .

Backward wave separation method in a single transmitter and multi-receiver sensor array for improved damage identification of two-dimensional structures

P. Qiao, Zijian Wang, 2017 .

Improved Mechanical Properties and Early-Age Shrinkage Resistance of Recycled Aggregate Concrete with Atomic Polymer Technology

P. Qiao, Fangliang Chen, 2013 .

Static and Nonlinear Impact Analyses of Free–Free Sandwich Plates on a Solid Half-space

P. Qiao, Mijia Yang, 2005 .

A Semi-analytical Model for Static and Impact Responses of Sandwich Plates on a Solid Half-space

P. Qiao, Mijia Yang, 2005 .

Mode I Fracture Toughness of Fiber Reinforced Composite-Wood Bonded Interface

P. Qiao, J. Davalos, E. Láng, 1998 .

A new bond failure criterion for ordinary state-based peridynamic mode II fracture analysis

P. Qiao, Yong Zhang, 2019, International Journal of Fracture.

High energy absorbing materials for blast resistant design

P. Qiao, Mijia Yang, 2010 .

Virtual crack closure technique in peridynamic theory

P. Qiao, Heng Zhang, 2020 .

Effects of Freeze-Thaw and Dry-Wet Conditionings on the Mode-I Fracture of FRP-Concrete Interface Bonds

P. Qiao, Ying Xu, 2004 .

Modeling of dynamic responses of CNT-reinforced composite cylindrical shells under impact loads

Pizhong Qiao, K. M. Liew, L. W. Zhang, 2017 .

On the modeling of tensile behavior of ultra-high performance fiber-reinforced concrete with freezing-thawing actions

P. Qiao, Zhidong Zhou, Linjun Lu, 2019, Composites Part B: Engineering.

Experimental Investigation on FRP-to-Timber Bonded Interfaces

Scott T. Smith, P. Qiao, Fangliang Chen, 2014 .

Thermo-mechanical modeling and characterization of three-phase shape memory alloy hybrid composites

P. Qiao, Linjun Lu, Haifan Yu, 2020, Smart Materials and Structures.

Concrete Performance Using Low-Degradation Aggregates

P. Qiao, Fangliang Chen, D. Mclean, 2012 .

Dependence of chloride ion diffusivity on evolution of pore-structures in freeze-thawed shotcrete: Multiscale characterization and modeling

P. Qiao, Lizhi Sun, Mengxin Liu, 2021 .

Micropolar in-Plane Shear and Rotation Moduli of Unidirectional Fiber Composites with Fiber–Matrix Interfacial Debonding

P. Qiao, P. Hutapea, 2002 .

Nonlinear low-velocity impact analysis of temperature-dependent nanotube-reinforced composite plates

P. Qiao, Jifeng Xu, Zhen-xin Wang, 2014 .

Buckling and free vibration analysis of shear deformable graphene-reinforced composite laminated plates

P. Qiao, Zhimin Li, Miao Wang, 2021, Composite Structures.

Nonlinear vibration analysis of geodesically-stiffened laminated composite cylindrical shells in an elastic medium

P. Qiao, Zhimin Li, Zhi-min Li, 2014 .

Nonlinear vibration and dynamic instability analyses of laminated doubly curved panels in thermal environments

P. Qiao, Zhimin Li, Tao Liu, 2020, Composite Structures.

EVALUATION OF MODE-I FRACTURE OF CONCRETE-FRP BONDED INTERFACES USING THREE-POINT BENDING TESTS

P. Qiao, Ying Xu, 2002 .

Novel bi-layer beam elements for elastic fracture analysis of delaminated composite beams

P. Qiao, Qinghui Liu, Shuyan Fu, 2022, Engineering Fracture Mechanics.

Mechanics of bimaterial interface : Shear deformable split bilayer beam theory and fracture

P. Qiao, Jialai Wang, 2005 .

Fracture Mechanics Methods for Interface Bond Evaluations of Fiber-Reinforced Plastic/Wood Hybrid Composites

P. Qiao, J. Davalos, 2003 .

Nonlinear stability analysis of thin-walled I-section laminated composite curved beams with elastic end restraints

P. Qiao, Sixin Huang, 2021 .

Buckling of thin-walled I-section laminated composite curved beams

P. Qiao, Sixin Huang, 2020 .

A renewable admixture to enhance the performance of cement mortars through a pre-hydration method

P. Qiao, Jialai Wang, Liang Wang, 2021, Journal of Cleaner Production.

Strength nature of two-dimensional woven nanofabrics under biaxial tension

P. Qiao, Yinfeng Li, Han Ye, 2019 .

CHARACTERIZATION OF MODE-II FRACTURE OF BI-MATERIAL BONDED INTERFACES USING TAPERED ENF SPECIMEN

P. Qiao, Jialai Wang, 2003 .

Performance enhancement of silica fume blended mortars using bio-functionalized nano-silica

P. Qiao, Jialai Wang, Haibin Ma, 2021, Construction and Building Materials.

Low-cost, ubiquitous biomolecule as a strength enhancer for cement mortars

P. Qiao, Jialai Wang, Yijia Dong, 2021, Construction and Building Materials.

Impact and Damage Prediction of Sandwich Beams with Flexible Core Considering Arbitrary Boundary Effects

P. Qiao, Mijia Yang, 2007 .

FRP Deck–Steel Girder Bridge System

P. Qiao, J. Davalos, An Chen, 2013 .

Finite Element Modeling and Analysis of FRP Composite Trough

P. Qiao, L. Shan, 2011 .

Finite element modeling and analysis of composite coverboards

P. Qiao, L. Shan, 2011, 2011 International Conference on Electric Technology and Civil Engineering (ICETCE).

Local Buckling Analysis of Restrained Orthotropic Plates under Generic In-Plane Loading

Zizi Lu, P. Qiao, Jifeng Xu, 2013 .

Application of Multifractal to Characterize Microscopic Crack Propagation in Red Sandstone

M. Cao, P. Qiao, Q. Ren, 2006 .

A coupled peridynamic strength and fracture criterion for open-hole failure analysis of plates under tensile load

P. Qiao, Heng Zhang, 2018, Engineering Fracture Mechanics.

Vibration analysis of sandwich plates with carbon nanotube-reinforced composite face-sheets

P. Qiao, Zhimin Li, Miao Wang, 2018, Composite Structures.

EXPLICIT LOCAL BUCKLING ANALYSIS OF ROTATIONALLY- AND VERTICALLY-RESTRAINED ORTHOTROPIC PLATES UNDER UNIAXIAL COMPRESSION

P. Qiao, X. Huo, 2012 .

Fatigue characterization and reliability analysis of wood flour filled polypropylene composites

M. Wolcott, P. Qiao, Han-Seung Yang, 2009 .

DeepFEM: A Novel Element-Based Deep Learning Approach for Solving Nonlinear Partial Differential Equations in Computational Solid Mechanics

P. Qiao, Zhimin Li, Tao Liu, 2023, Journal of Engineering Mechanics.

Cohesive fracture simulation and failure modes of FRP–concrete bonded interfaces

Pizhong Qiao, P. Qiao, Y. Chen, 2008 .

Freeze-Thaw Durability and Long-Term Performance Evaluation of Shotcrete in Cold Regions

P. Qiao, Zhidong Zhou, 2017 .

Best practices of using shotcrete for wall fascia and slope stabilization (phase 1 study)

P. Qiao, Zhidong Zhou, 2017 .

Multiscale modeling of damage and fracture in freeze-thawed shotcrete

P. Qiao, Lizhi Sun, Mengxin Liu, 2021, International Journal of Damage Mechanics.

Characterization of microstructural damage evolution of freeze-thawed shotcrete by an integrative micro-CT and nanoindentation statistical approach

P. Qiao, Lizhi Sun, Dongxu Liu, 2021 .

Recycled aggregate concrete enhanced with polymer aluminium sulfate

Pizhong Qiao, Haifang Wen, Xuefeng Song, 2015 .

Bond behavior of epoxy-coated rebar in ultra-high performance concrete

Pizhong Qiao, Zhidong Zhou, P. Qiao, 2018, Construction and Building Materials.

Multiscale Performance Characterization of Concrete Formed by Controlled Permeability Formwork Liner

P. Qiao, Z. Tian, 2013 .

Durability of ultra-high performance concrete in tension under cold weather conditions

P. Qiao, Zhidong Zhou, 2018, Cement and Concrete Composites.

Fiber-Reinforced Composite and Wood Bonded Interfaces: Part 1. Durability and Shear Strength

Julio F. Davalos, Pizhong Qiao, P. Qiao, 2000 .

Homogenized elastic properties of honeycomb sandwich with skin effect

Pizhong Qiao, P. Qiao, X. Frank Xu, 2002 .

Characterization of Mode-I fracture of hybrid material interface bonds by contoured DCB specimens

Julio F. Davalos, Pizhong Qiao, P. Qiao, 1997 .

Fracture Toughness of Wood—Wood and Wood—FRP Bonded Interfaces Under Mode-II Loading

P. Qiao, Jialai Wang, 2003 .

Compliance rate change of tapered double cantilever beam specimen with hybrid interface bonds

M. Wolcott, P. Qiao, J. Davalos, 1998 .

Peridynamic simulation of two-dimensional axisymmetric pull-out tests

P. Qiao, Yong Zhang, 2019, International Journal of Solids and Structures.

EVALUATION OF FRACTURE ENERGY OF COMPOSITE-CONCRETE BONDED INTERFACES USING THREE-POINT BEND TESTS

Pizhong Qiao, P. Qiao, Ying Xu, 2004 .

An extended state-based peridynamic model for damage growth prediction of bimaterial structures under thermomechanical loading

P. Qiao, Heng Zhang, 2017 .

An extended peridynamic approach for deformation and fracture analysis

Pizhong Qiao, Dan Huang, Guangda Lu, 2015 .

On the wavelet–fractal nonlinear damage diagnosis of mechanical systems

Pizhong Qiao, Maosen Cao, M. Cao, 2009 .

Impact identification on concrete panels using a surface-bonded smart piezoelectric module system

P. Qiao, Ayumi Manawadu, 2021, Smart Materials and Structures.

A computational approach for analysis and optimal design of FRP beams

Julio F. Davalos, Pizhong Qiao, P. Qiao, 1999 .

Dept. of Civil and Environmental Engineering, Washington State University CE 537 Section 02 Structural Composites - Composite Materials in Civil Infrastructure An Introductory Composites Design Course for Graduate/Senior Undergraduate Students

Pizhong Qiao, P. Qiao, 2007 .

On the energy release rate and mode mix of delaminated shear deformable composite plates

Pizhong Qiao, Jialai Wang, P. Qiao, 2004 .

A new peridynamic mixed-mode bond failure model for interface delamination and homogeneous materials fracture analysis

P. Qiao, Heng Zhang, Xiong Zhang, 2021 .

Vibration-based Damage Identification Methods: A Review and Comparative Study

Pizhong Qiao, Wei Fan, P. Qiao, 2011 .

Molecular dynamics evaluation of strain rate and size effects on mechanical properties of FCC nickel nanowires

P. Qiao, Qing Zhang, Dan Huang, 2011 .

Analysis and design of pultruded FRP shapes under bending

Julio F. Davalos, Pizhong Qiao, Roberto Lopez-Anido, 1996 .

A new semi-analytical method for nonlinear stability analysis of stiffened laminated composite doubly-curved shallow shells

P. Qiao, Sixin Huang, 2020 .

Nonlinear stability analysis of rotationally-restrained imperfect doubly-curved composite shallow shells

P. Qiao, Linjun Lu, Sixin Huang, 2019, Thin-Walled Structures.

Semi-analytical solutions to buckling and free vibration analysis of carbon nanotube-reinforced composite thin plates

Pizhong Qiao, Zhi-Min Li, P. Qiao, 2016 .

Micro-CT-based micromechanics and numerical homogenization for effective elastic property of ultra-high performance concrete

P. Qiao, Zhidong Zhou, Yanlin Zhao, 2020, International Journal of Damage Mechanics.

An axisymmetric ordinary state-based peridynamic model for linear elastic solids

Pizhong Qiao, P. Qiao, Yong Zhang, 2018, Computer Methods in Applied Mechanics and Engineering.

Tolerance Design of Multistage Aero-Engine Casing Assembly by Vibration Characteristic Evaluation

P. Qiao, Zhimin Li, Tao Liu, 2021 .

A two-dimensional elasticity model for bending and free vibration analysis of laminated graphene-reinforced composite beams

P. Qiao, Zhimin Li, Miao Wang, 2019, Composite Structures.

Localization and size quantification of surface crack of concrete based on Rayleigh wave attenuation model

P. Qiao, Linjun Lu, Haifan Yu, 2021 .

Free Vibration Analysis of Fiber-Reinforced Plastic Composite Cantilever I-Beams

Pizhong Qiao, Guiping Zou, P. Qiao, 2002 .

The closed-form solutions for buckling and postbuckling behaviour of anisotropic shear deformable laminated doubly-curved shells by matching method with the boundary layer of shell buckling

P. Qiao, Zhimin Li, Tao Liu, 2021, Acta Mechanica.

A novel semi-analytical method for buckling analysis of stiffened laminated composite plates

P. Qiao, Sixin Huang, 2020 .

Damage and progressive failure of concrete structures using non-local peridynamic modeling

Pizhong Qiao, Dan Huang, Qing Zhang, 2011 .

Vibration Analysis of Honeycomb FRP Sandwich Beams by a High Order Theory

P. Qiao, W. Fan, X. Huo, 2008 .

Higher-Order Finite Strip Method for Postbuckling Analysis of Imperfect Composite Plates

Pizhong Qiao, Guiping Zou, P. Qiao, 2002 .

Integrated wavelet transform and its application to vibration mode shapes for the damage detection of beam-type structures

Pizhong Qiao, Maosen Cao, M. Cao, 2008, Smart Materials and Structures.

FEASIBILITY STUDY OF PROTOTYPE GFRP-REINFORCED WOOD RAILROAD CROSSTIE

Julio F. Davalos, Pizhong Qiao, P. Qiao, 1999 .

Shear bearing of cross-plate joints between diaphragm wall panels – II: numerical analysis and prediction formula

Pizhong Qiao, Jin-Jian Chen, Jian-Hua Wang, 2016 .

Formation epoch and genesis of intrusive rocks in Huogeqi orefield of Inner Mongolia and their relationship with copper mineralization

P. Qiao, Mlr Key, 2010 .

Microstructural damage evolution and its effect on fracture behavior of concrete subjected to freeze-thaw cycles

P. Qiao, Lizhi Sun, C. Su, 2018, International Journal of Damage Mechanics.

Cohesive fracture and probabilistic damage analysis of freezing-thawing degradation of concrete

Pizhong Qiao, Fangliang Chen, P. Qiao, 2013 .

Prediction of Restrained Shrinkage Cracking of Shotcrete Rings Using Fracture Mechanics–Based Approach

P. Qiao, Zhidong Zhou, 2019, Journal of Materials in Civil Engineering.

Durability of air-entrained shotcrete exposed to cyclic freezing and thawing effect

P. Qiao, Zhidong Zhou, 2019, Cold Regions Science and Technology.

Damage detection of fiber-reinforced polymer honeycomb sandwich beams

Pizhong Qiao, Wahyu Lestari, P. Qiao, 2005 .

A 2-D continuous wavelet transform of mode shape data for damage detection of plate structures

Pizhong Qiao, Wei Fan, P. Qiao, 2009 .

Flexural-torsional buckling of fiber-reinforced plastic composite open channel beams

Pizhong Qiao, Luyang Shan, P. Qiao, 2005 .

Explicit local buckling analysis and design of fiber–reinforced plastic composite structural shapes

Pizhong Qiao, Luyang Shan, P. Qiao, 2005 .

Approximate closed-form solution for buckling of orthotropic plates with longitudinal edges elastically restrained against rotation

P. Qiao, Qingyuan Chen, 2022, Thin-Walled Structures.

Buckling and postbuckling of rotationally-restrained laminated composite plates under shear

P. Qiao, Qingyuan Chen, 2021 .

Post-buckling behavior of imperfect laminated composite plates with rotationally-restrained edges

P. Qiao, Qingyuan Chen, 2015 .

Buckling analysis of laminated plate structures with elastic edges using a novel semi-analytical finite strip method

Pizhong Qiao, Qingyuan Chen, P. Qiao, 2016 .

Development of Surface-Mounted Smart Piezoelectric Modules for Condition Assessment of Bridges

Pizhong Qiao, Zhidong Zhou, Ayumi K. Manawadu, 2018 .

Higher-order impact modeling of sandwich structures with flexible core

Pizhong Qiao, Mijia Yang, P. Qiao, 2005 .

Modeling and experimental detection of damage in various materials using the pulse-echo method and piezoelectric sensors/actuators

Pizhong Qiao, Mijia Yang, P. Qiao, 2005, Smart Materials and Structures.

Guided-wave based damage detection method for various materials using piezoelectric sensors/actuators

Pizhong Qiao, Mijia Yang, Wahyu Lestari, 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Application of Wave Propagation Analysis for Damage Identification in Composite Laminated Beams

Pizhong Qiao, Wahyu Lestari, P. Qiao, 2005 .

Experimental investigation of damage detection on composite plates using wave analysis

Pizhong Qiao, Wahyu Lestari, P. Qiao, 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Delamination identification of laminated composite plates using a continuum damage mechanics model and subset selection technique

Pizhong Qiao, Gun Jin Yun, Shen Shang, 2010 .

Smart FRP Composite Sandwich Bridge Decks in Cold Regions

Pizhong Qiao, Wei Fan, J. Leroy Hulsey, 2011 .

Design Optimization of Fiber Reinforced Plastic Composite Shapes

Julio F. Davalos, Pizhong Qiao, Ever J. Barbero, 1998 .

Multiobjective material architecture optimization of pultruded FRP I-beams

Julio F. Davalos, Pizhong Qiao, Ever J. Barbero, 1996 .

Dynamics-based Damage Detection of Composite Laminated Beams using Contact and Noncontact Measurement Systems

P. Qiao, W. Lestari, Jialai Wang, 2007 .

Tensile behavior of ultra-high performance concrete: Analytical model and experimental validation

P. Qiao, Zhidong Zhou, 2019, Construction and Building Materials.

Direct Tension Test for Characterization of Tensile Behavior of Ultra-High Performance Concrete

P. Qiao, Zhidong Zhou, 2018, Journal of Testing and Evaluation.

Experimental Investigation on Bond Performance of Sea Sand Coral Concrete with Frp Bars Reinforcement for Marine Environment

P. Qiao, Chunwei Zhang, Li Sun, 2022, SSRN Electronic Journal.

Interface durability of construction materials externally reinforced with FRP composites

P. Qiao, J. Davalos, 2001 .

Crack Growth Resistance of Hybrid Fiber-Reinforced Cement Matrix Composites

Pizhong Qiao, Ying Chen, P. Qiao, 2011 .

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials:

Pizhong Qiao, Mijia Yang, P. Qiao, 2008 .

Analysis of cushion systems for impact protection design of bridges against overheight vehicle collision

Pizhong Qiao, Mijia Yang, P. Qiao, 2010 .

Fast inverse identification of delamination of E-glass/epoxy laminated composite panels

Pizhong Qiao, Gun Jin Yun, Shen Shang, 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Debonding analysis of FRP–concrete interface between two balanced adjacent flexural cracks in plated beams

P. Qiao, Fangliang Chen, 2009 .

Investigation on degradation of micromechanical properties of interfacial transition zone of ultra-high performance concrete under freeze-thaw cycles

P. Qiao, Linjun Lu, R. Xie, 2018, SCIENTIA SINICA Technologica.

Neural network committee-based sensitivity analysis strategy for geotechnical engineering problems

Pizhong Qiao, Maosen Cao, M. Cao, 2008, Neural Computing and Applications.

A Critical Review on Buckling and Post- Buckling Analysis of Composite Structures

Pizhong Qiao, Jifeng Xu, P. Qiao, 2013 .

Flexural-torsional buckling of pultruded fiber reinforced plastic composite I-beams: experimental and analytical evaluations

Julio F. Davalos, Hani A. Salim, Pizhong Qiao, 1997 .

An improved mesoscale damage model for quasi-brittle fracture analysis of concrete with ordinary state-based peridynamics

P. Qiao, C. Su, Yijia Dong, 2020 .

Probabilistic damage modeling and service-life prediction of concrete under freeze–thaw action

P. Qiao, Fangliang Chen, 2014, Materials Structure.

Thermal effects on the fracture of adhesively bonded composite-concrete interface

P. Qiao, Ying Xu, 2005 .

A thermal-hydraulic-mechanical coupling model for freezing process simulation of cementitious materials with entrained air voids

P. Qiao, Lizhi Sun, C. Su, 2020 .

Modeling and optimal design of composite-reinforced wood railroad crosstie

Julio F. Davalos, Pizhong Qiao, P. Qiao, 1998 .

CT image-based synthetic mesostructure generation for multiscale fracture analysis of concrete

Pizhong Qiao, Yijia Dong, P. Qiao, 2021 .

Characterization of Substrate-to-Overlay Interface Bond in Concrete Repairs: A Review

P. Qiao, Haifang Wen, Ayumi Manawadu, 2023, Construction and Building Materials.

Transverse Shear Stiffness of Composite Honeycomb Cores and Efficiency of Material

Pizhong Qiao, Jialai Wang, P. Qiao, 2005 .

Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications

Julio F. Davalos, Pizhong Qiao, Karl E Barth, 2001 .

RETRACTION: Homogenization and Optimization of Sinusoidal Honeycomb Cores for Transverse Shear Stiffness

P. Qiao, J. Davalos, W. Fan, 2008 .

TRANSVERSE SHEAR STIFFNESS OF COMPOSITE HONEYCOMB CORE WITH GENERAL CONFIGURATION

Julio F. Davalos, Pizhong Qiao, P. Qiao, 2001 .

Freeze-thaw durability of shotcrete-concrete interface bonds in tension

P. Qiao, Haifang Wen, Ayumi Manawadu, 2023, Cold Regions Science and Technology.

A two-dimensional ordinary state-based peridynamic model for elastic and fracture analysis

P. Qiao, Heng Zhang, 2020, Engineering Fracture Mechanics.

Free vibration analysis of fiber-reinforced polymer honeycomb sandwich beams with a refined sandwich beam theory

Pizhong Qiao, Wei Fan, Shi Cheng, 2016 .

Microstructural crack segmentation of three-dimensional concrete images based on deep convolutional neural networks

Pizhong Qiao, Chao Su, Lizhi Sun, 2020 .

Active Vibration Damping of Composite Beam using Smart Sensors and Actuators

Pizhong Qiao, G. Song, Wieslaw K. Binienda, 2002 .

Microstructural damage characterization of concrete under freeze-thaw action

P. Qiao, Lizhi Sun, Dx Liu, 2017 .

Numerical analysis of I-Lam honeycomb sandwich panels for collision protection of reinforced concrete beams

P. Qiao, Fangliang Chen, Shi Cheng, 2017 .

Mechanical Behavior and Size Sensitivity of Nanocrystalline Nickel Wires Using Molecular Dynamics Simulation

P. Qiao, Dan Huang, 2011 .

Improved buckling analysis of stiffened laminated composite plates by spline finite strip method

P. Qiao, Yanli Wang, 2021 .

Impact analysis of I-Lam sandwich system for over-height collision protection of highway bridges

Pizhong Qiao, Ayman Mosallam, Mijia Yang, 2004 .

Interaction between cracks and effect of microcrack zone on main crack tip

P. Qiao, Qing Zhang, Lijuan Li, 2010 .

Nondestructive Assessment of Reinforced Concrete Structures Based on Fractal Damage Characteristic Factors

Pizhong Qiao, Maosen Cao, Qingwen Ren, 2006 .

Damage detection of laminated composite beams with progressive wavelet transforms

Pizhong Qiao, Maosen Cao, M. Cao, 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Novel approximate waveform capacity dimension for damage identification of beam-type structures

Pizhong Qiao, Maosen Cao, M. Cao, 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Microstructural Origins of Wave Modulus of Elasticity of Concrete

P. Qiao, Zhidong Zhou, Lizhi Sun, 2020, Journal of Engineering Mechanics.

Material property assessment and crack identification of recycled concrete with embedded smart cement modules

Pizhong Qiao, Wei Fan, Fangliang Chen, 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

LOCAL BUCKLING OF COMPOSITE FRP SHAPES BY DISCRETE PLATE ANALYSIS

Julio F. Davalos, Pizhong Qiao, Jialai Wang, 2001 .

Shear Moduli of Structural Composites from Torsion Tests

P. Qiao, H. Salim, J. Davalos, 2002 .

An Over-Height Collision Protection System of Sandwich PolymerComposites Integrated with Remote Monitoring for Concrete BridgeGirders

Gangbing Song, Pizhong Qiao, Ayman Mosallam, 2008 .

Structural Damage Detection Using Local Damage Factor

Pizhong Qiao, Qingwen Ren, Shanshan Wang, 2006 .

FRP-to-Softwood Joints: Experimental Investigation

Scott T. Smith, P. Qiao, Jingui Wan, 2010 .

Mixed-Mode Fracture of Hybrid Material Bonded Interfaces under Four-Point Bending

Pizhong Qiao, Fangliang Chen, Cole S. Hamey, 2011 .

\IIntroduction to Composite Materials Design\N by Ever J. Barbero

P. Qiao, J. Davalos, 1999 .

Impact analysis ofI-Lam sandwich system f over-height collision protection ofhighway bridges

Pizhong Qiao, Ayman Mosallam, Mijia Yang, 2004 .

Post-buckling analysis of composite plates under combined compression and shear loading using finite strip method

Pizhong Qiao, Qingyuan Chen, P. Qiao, 2014 .

A new surface fractal dimension for displacement mode shape-based damage identification of plate-type structures

Pizhong Qiao, Binkai Shi, P. Qiao, 2018 .

Smart piezoelectric modules-based wave energy measurement for crack damage evaluation of concrete beams

P. Qiao, Shi Yan, W. Sun, 2023, Measurement.

On the Linear Viscoelasticity of Thin-Walled Laminated Composite Beams

P. Qiao, J. Davalos, E. Barbero, 2000 .

Performance Characterization of Wood-FRP Bonded Interfaces

P. Qiao, J. Davalos, Junhui Jia, 2007 .

Mode-II Fatigue Fracture of Wood-Composite Bonded Interfaces

P. Qiao, Guanyu Hu, 2004 .

Castigliano’s Second Theorem for Deformation Determination of a Cracked Body

P. Qiao, Yinfeng Li, Zhonghua Li, 2015 .

Active vibration control of a smart pultruded fiber-reinforced polymer I-beam

Gangbing Song, Pizhong Qiao, Vineet Sethi, 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Flexural-torsional buckling of fiber-reinforced plastic composite cantilever I-beams

Julio F. Davalos, Pizhong Qiao, Guiping Zou, 2003 .

Buckling analysis of restrained orthotropic plates under combined in-plane shear and axial loads and its application to web local buckling

P. Qiao, Qinghui Liu, Xingwen Guo, 2014 .

Explicit local buckling analysis of rotationally-restrained orthotropic plates under uniform shear

Pizhong Qiao, Xuping Huo, P. Qiao, 2011 .

Local Buckling of Elastically Restrained Fiber-Reinforced Plastic Plates and its Application to Box Sections

P. Qiao, G. Zou, 2002 .

LOCAL BUCKLING OF COMPOSITE FIBER-REINFORCED PLASTIC WIDE-FLANGE SECTIONS

Pizhong Qiao, Guiping Zou, P. Qiao, 2003 .