Z. Pan

Weihua Li, Z. Pan, D. Ding, 2017, 2017 IEEE 7th Annual International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (CYBER).

An overview on TiFe intermetallic for solid-state hydrogen storage: microstructure, hydrogenation and fabrication processes

Z. Pan, Huijun Li, N. Alam, 2020, Critical Reviews in Solid State and Materials Sciences.

Hot Deformation Behavior and Microstructural Evolution of Wire-Arc Additively Fabricated Inconel 718 Superalloy

Z. Pan, N. Alam, D. Liang, 2022, Metallurgical and Materials Transactions A.

A strut-based process planning method for wire arc additive manufacturing of lattice structures

Z. Pan, D. Ding, Huijun Li, 2021 .

Effect of post-weld heat treatment on microstructure and mechanical properties of deep penetration autogenous TIG-welded dissimilar joint between creep strength enhanced ferritic steel and austenitic stainless steel

Z. Pan, D. Cuiuri, Zhenyu Fei, 2020, The International Journal of Advanced Manufacturing Technology.

Z. Pan, D. Cuiuri, Huijun Li, 2020, The International Journal of Advanced Manufacturing Technology.

Investigation into the viability of K-TIG for joining armour grade quenched and tempered steel

Bintao Wu, Z. Pan, D. Ding, 2018 .

Microstructure and mechanical properties of 600 MPa grade ultra-high strength aluminum alloy fabricated by wire-arc additive manufacturing

Haiyang Li, Z. Pan, P. Xue, 2023, Journal of Materials Science & Technology.

Low neutron cross-section FeCrVTiNi based high-entropy alloys: design, additive manufacturing and characterization

Z. Pan, Huijun Li, C. Shen, 2022, Microstructures.

Microstructural characterization and mechanical properties of K-TIG welded SAF2205/AISI316L dissimilar joint

Z. Pan, D. Cuiuri, Huijun Li, 2019, Journal of Manufacturing Processes.

A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system

Shanben Chen, Huijun Li, Chunyang Xia, 2020, Journal of Manufacturing Systems.

Precipitation Strengthening in Ni–Cu Alloys Fabricated Using Wire Arc Additive Manufacturing Technology

Z. Pan, Huijun Li, C. Shen, 2019, Metals.

Precipitation strengthening in NiCu alloys fabricated using wire arc additive manufacturing technology

Z. Pan, Huijun Li, C. Shen, 2019 .

The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution

Bintao Wu, Z. Pan, D. Ding, 2018, Corrosion Science.

Neutron Optics Upgrades to the Residual Stress Diffractometer, KOWARI

M. New, Z. Pan, N. Hoye, 2016 .

Fabrication of FeNi intermetallic using the wire-arc additive manufacturing process: A feasibility and neutron diffraction phase characterization study

Z. Pan, Huijun Li, C. Shen, 2020 .

Comparative study on crystallographic orientation, precipitation, phase transformation and mechanical response of Ni-rich NiTi alloy fabricated by WAAM at elevated substrate heating temperatures

Z. Pan, Huijun Li, Jun Wang, 2021 .

In-situ dual wire arc additive manufacturing of NiTi-coating on Ti6Al4V alloys: Microstructure characterization and mechanical properties

Z. Pan, Huijun Li, Jun Wang, 2020 .

Wire-feed additive manufacturing of metal components: technologies, developments and future interests

Zengxi Pan, Dominic Cuiuri, Donghong Ding, 2015 .

Fabrication of Copper-Rich Cu-Al Alloy Using the Wire-Arc Additive Manufacturing Process

Z. Pan, Huijun Li, Yan Ma, 2017, Metallurgical and Materials Transactions B.

Microstructural evolution and mechanical properties of deep cryogenic treated Cu–Al–Si alloy fabricated by Cold Metal Transfer (CMT) process

Z. Pan, Xizhang Chen, Kun Liu, 2020 .

The effect of postproduction heat treatment on γ-TiAl alloys produced by the GTAW-based additive manufacturing process

Zengxi Pan, Dominic Cuiuri, Yan Ma, 2016 .

Introduction of ternary alloying element in wire arc additive manufacturing of titanium aluminide intermetallic

Z. Pan, D. Cuiuri, Huijun Li, 2019, Additive Manufacturing.

Improving the weld microstructure and material properties of K-TIG welded armour steel joint using filler material

Bintao Wu, Z. Pan, D. Cuiuri, 2018, The International Journal of Advanced Manufacturing Technology.

Characterization of In-Situ Alloyed and Additively Manufactured Titanium Aluminides

Zengxi Pan, Dominic Cuiuri, Yan Ma, 2014, Metallurgical and Materials Transactions B.

Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process

Dominic Cuiuri, Donghong Ding, Zengxi Stephen Pan, 2017 .

Model-free adaptive iterative learning control of melt pool width in wire arc additive manufacturing

Shanben Chen, Huijun Li, Chunyang Xia, 2020, The International Journal of Advanced Manufacturing Technology.

On the development of pseudo-eutectic AlCoCrFeNi2.1 high entropy alloy using Powder-bed Arc Additive Manufacturing (PAAM) process

Bintao Wu, Z. Pan, Huijun Li, 2021 .

Tungsten doping enhances the mechanical properties of FeCr2V-based medium entropy alloy revealed by experiments and calculations

D. Wexler, Z. Pan, Yangfan Wang, 2023, Journal of Alloys and Compounds.

Comparative effect of Mn/Ti solute atoms and TiC/Ni3(Al,Ti) nano-particles on work hardening behaviour in Ni Cu alloys fabricated by wire arc additive manufacturing

Z. Pan, H. Li, S. van Duin, 2019, Materials Science and Engineering: A.

Effect of chemical composition on microstructure, strength and wear resistance of wire deposited Ni-Cu alloys

Z. Pan, D. Ding, H. Li, 2018, Additive Manufacturing.

Feasibility Study of Low Force Robotic Friction Stir Process and its Effect On Cavitation Erosion and Electrochemical Corrosion for Ni Al Bronze Alloys

Z. Pan, D. Cuiuri, Huijun Li, 2014, Metallurgical and Materials Transactions B.

Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4V alloy deposited by wire arc additive manufacturing

Bintao Wu, Dominic Cuiuri, Donghong Ding, 2018, Additive Manufacturing.

Effect of Heat Input on Weld Formation and Tensile Properties in Keyhole Mode TIG Welding Process

Bintao Wu, Z. Pan, D. Ding, 2019, Metals.

Improving the weld microstructure and material properties of K-TIG welded armour steel joint using filler material

Bintao Wu, Z. Pan, D. Cuiuri, 2018, The International Journal of Advanced Manufacturing Technology.

Investigation of humping phenomenon for the multi-directional robotic wire and arc additive manufacturing

Weihua Li, Z. Pan, D. Ding, 2020, Robotics Comput. Integr. Manuf..

A tool-path generation strategy for wire and arc additive manufacturing

Dominic Cuiuri, Donghong Ding, Huijun Li, 2014, The International Journal of Advanced Manufacturing Technology.

Neutron diffraction residual stress determinations in Fe3Al based iron aluminide components fabricated using wire-arc additive manufacturing (WAAM)

Z. Pan, D. Cuiuri, Huijun Li, 2019, Additive Manufacturing.

Microstructure and mechanical properties of ultra-high strength Al-Zn-Mg-Cu-Sc aluminum alloy fabricated by wire + arc additive manufacturing

Z. Pan, Xinpeng Guo, Siyu Zhou, 2022, Journal of Manufacturing Processes.

Microstructural characterization and oxidation performance of solution-annealed and precipitation hardened wire-arc additively manufactured Inconel 718 superalloys

Z. Pan, Huijun Li, N. Alam, 2022, Additive Manufacturing.

Process planning for robotic wire and arc additive manufacturing

Zengxi Pan, Dominic Cuiuri, Donghong Ding, 2015, 2015 IEEE 10th Conference on Industrial Electronics and Applications (ICIEA).

A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)

Huijun Li, Zengxi Pan, Dominic Cuiuri, 2015 .

Process Planning Strategy for Wire and Arc Additive Manufacturing

Zengxi Pan, Donghong Ding, Huijun Li, 2015 .

A tool-path generation strategy for wire and arc additive manufacturing

Z. Pan, D. Ding, D. Cuiuri, 2014, The International Journal of Advanced Manufacturing Technology.

Modelling and prediction of surface roughness in wire arc additive manufacturing using machine learning

Z. Pan, Huijun Li, Shanben Chen, 2021, Journal of Intelligent Manufacturing.

Model predictive control of layer width in wire arc additive manufacturing

Z. Pan, Huijun Li, Long Wang, 2020 .

Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding

Z. Pan, D. Cuiuri, Huijun Li, 2015 .

In-Situ Fabrication of Titanium Iron Intermetallic Compound by the Wire Arc Additive Manufacturing Process

Bintao Wu, Z. Pan, Huijun Li, 2019, Metallurgical and Materials Transactions A.

Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling

Bintao Wu, Z. Pan, D. Ding, 2019, Science and Technology of Welding and Joining.

Effects of synchronized magnetic arc oscillation on microstructure, texture, grain boundary and mechanical properties of wire arc additively manufactured Ti6Al4V alloy

D. Wexler, Bintao Wu, Z. Pan, 2022, Additive Manufacturing.

A review of slicing methods for directed energy deposition based additive manufacturing

Ken Chen, Jing Xu, Donghong Ding, 2018, Rapid Prototyping Journal.

Automatic multi-direction slicing algorithms for wire based additive manufacturing

Zengxi Pan, Dominic Cuiuri, Donghong Ding, 2016 .

A Review on Chatter in Robotic Machining Process Regarding Both Regenerative and Mode Coupling Mechanism

Weihua Li, Lei Yuan, Zengxi Pan, 2018, IEEE/ASME Transactions on Mechatronics.

Chatter analysis of robotic machining process

Hui Zhang, Zengxi Pan, Jianjun Wang, 2006 .

Robotic skeleton arc additive manufacturing of aluminium alloy

Yu Ziping, Zengxi Pan, Stephen van Duin, 2021, The International Journal of Advanced Manufacturing Technology.

A practical fabrication strategy for wire arc additive manufacturing of metallic parts with wire structures

Z. Pan, D. Ding, Huijun Li, 2021, The International Journal of Advanced Manufacturing Technology.

Adaptive path planning for wire-feed additive manufacturing using medial axis transformation

Dominic Cuiuri, Donghong Ding, Zengxi Stephen Pan, 2016 .

A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures

Huijun Li, Zengxi Pan, Dominic Cuiuri, 2015 .

Mode coupling chatter prediction and avoidance in robotic machining process

Lei Yuan, Thomas Lepper, Stephen van Duin, 2019, The International Journal of Advanced Manufacturing Technology.

Analysis and suppression of chatter in robotic machining process

Hui Zhang, Zengxi Pan, Z. Pan, 2007, 2007 International Conference on Control, Automation and Systems.

Influences of postproduction heat treatment on Fe3Al-based iron aluminide fabricated using the wire-arc additive manufacturing process

Dominic Cuiuri, Stephen van Duin, Zengxi Stephen Pan, 2018 .

Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing

Zengxi Pan, Donghong Ding, Chen Shen, 2016, Materials.

Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part

Chen Shen, Huijun Li, Zengxi Pan, 2016, Comput. Aided Des..

The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process

Ying Wang, Dominic Cuiuri, Donghong Ding, 2018, Additive Manufacturing.

In-depth study of the mechanical properties for Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process

Z. Pan, D. Cuiuri, Huijun Li, 2016 .

Effects of inter-layer remelting frequency on the microstructure evolution and mechanical properties of equimolar CoCrFeNiMn high entropy alloys during in-situ powder-bed arc additive manufacturing (PBAAM) process

Z. Pan, Huijun Li, Jun Wang, 2022, Journal of Materials Science & Technology.

Mask R-CNN-Based Welding Image Object Detection and Dynamic Modelling for WAAM

Yanling Xu, Zengxi Pan, Chunyang Xia, 2020 .

Toward a smart wire arc additive manufacturing system: A review on current developments and a framework of digital twin

Z. Pan, Hongmin Wang, Lijuan Yuan, 2023, Journal of Manufacturing Systems.

The well-distributed volumetric heat source model for numerical simulation of wire arc additive manufacturing process

Z. Pan, D. Ding, Huijun Li, 2021 .

Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing

Zengxi Pan, Dominic Cuiuri, Donghong Ding, 2016 .

Research and application of artificial intelligence techniques for wire arc additive manufacturing: a state-of-the-art review

Z. Pan, D. Ding, Lijuan Yuan, 2023, Robotics Comput. Integr. Manuf..

Development of a DC-LSND welding process for GMAW on DH-36 Steel

John Norrish, Zengxi Pan, Huijun Li, 2011 .

Recent Progress on Programming Methods for Industrial Robots

John Norrish, Zengxi Pan, Stephen van Duin, 2010, ISR/ROBOTIK.

Recognizing human motions through mixture modeling of inertial data

Montserrat Ros, Fazel Naghdy, David Stirling, 2015, Pattern Recognit..

Automatic program generation for welding robots from CAD

Zengxi Pan, Stephen van Duin, Andrew Short, 2016, 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).

Dynamic Modeling of Weld Bead Geometry Features in Thick Plate GMAW Based on Machine Vision and Learning

Zengxi Pan, Yinshui He, Guohong Ma, 2020, Sensors.

Recent progress on sampling based dynamic motion planning algorithms

Zengxi Pan, Stephen van Duin, Andrew Short, 2016, 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).

Motion capture in robotics review

Fazel Naghdy, Matthew Field, Zengxi Pan, 2009, 2009 IEEE International Conference on Control and Automation.

Fabrication of metallic parts with overhanging structures using the robotic wire arc additive manufacturing

John Norrish, Zengxi Pan, Donghong Ding, 2020 .

Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing

Z. Pan, Huijun Li, Jun Wang, 2019, Materials Science and Engineering: A.

Effects of Deposition Current on the Microstructure and Pseudoelasticity of Wire-Arc Additively Manufactured Ni-rich NiTi Alloys

Z. Pan, Huijun Li, Jun Wang, 2020, AHFE.

Machining with Flexible Manipulators: Critical Issues and Solutions

Hui Zhang, Jianjun Wang, Zengxi Pan, 2006 .

Machining with flexible manipulator: toward improving robotic machining performance

Zengxi Pan, Jianjun Wang, Hui Zhang, 2005, Proceedings, 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics..

Recent progress of zeolitic imidazolate frameworks (ZIFs) in superhydrophobic and anticorrosive coatings for metals and their alloys

Lin Xiao, Z. Pan, Dan Zhang, 2023, Journal of Coatings Technology and Research.

Human motion capture sensors and analysis in robotics

Fazel Naghdy, David Stirling, Matthew Field, 2011, Ind. Robot.

Effects of wire feed conditions on in situ alloying and additive layer manufacturing of titanium aluminides using gas tungsten arc welding

Zengxi Pan, Dominic Cuiuri, Yan Ma, 2014 .

Application of Multidirectional Robotic Wire Arc Additive Manufacturing Process for the Fabrication of Complex Metallic Parts

Bintao Wu, Zengxi Pan, Donghong Ding, 2020, IEEE Transactions on Industrial Informatics.

A defect detection system for wire arc additive manufacturing using incremental learning

Chunyang Xia, Joseph Polden, Lei Wang, 2021, J. Ind. Inf. Integr..

Learning Trajectories for Robot Programing by Demonstration Using a Coordinated Mixture of Factor Analyzers

Fazel Naghdy, David Stirling, Matthew Field, 2016, IEEE Transactions on Cybernetics.

Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process

Z. Pan, D. Ding, D. Cuiuri, 2016, The International Journal of Advanced Manufacturing Technology.

Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing

Z. Pan, D. Cuiuri, Huijun Li, 2019, Materials Letters.

Inertial sensing for human motor control symmetry in injury rehabilitation

Montserrat Ros, Fazel Naghdy, David Stirling, 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

Layer-by-layer model-based adaptive control for wire arc additive manufacturing of thin-wall structures

Z. Pan, Yuxing Li, Chunyang Xia, 2022, J. Intell. Manuf..

WAAM process for metal block structure parts based on mixed heat input

Z. Pan, Lijuan Yuan, Jun Wang, 2021, The International Journal of Advanced Manufacturing Technology.

The Strategy for Fabricating Wire-Structure Parts Using Robotic Skeleton Arc Additive Manufacturing

Z. Pan, D. Ding, Lei Yuan, 2019, 2019 IEEE 9th Annual International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (CYBER).

Enhanced corrosion performance in Ti-6Al-4V alloy produced via wire-arc directed energy deposition with magnetic arc oscillation

Bintao Wu, Z. Pan, Pubo Li, 2023, Additive Manufacturing.

Towards intelligent monitoring system in wire arc additive manufacturing: a surface anomaly detector on a small dataset

Z. Pan, Yuxing Li, Huijun Li, 2021, The International Journal of Advanced Manufacturing Technology.

The first step towards intelligent wire arc additive manufacturing: An automatic bead modelling system using machine learning through industrial information integration

Zengxi Pan, Donghong Ding, Lei Wang, 2021, J. Ind. Inf. Integr..

Motion segmentation for humanoid control planning

Fazel Naghdy, David Stirling, Matthew Field, 2008 .

Autonomous blimp control using reinforcement learning

Fazel Naghdy, Yiwei Liu, David Stirling, 2009 .

Wire arc additive manufacturing: A review on digital twinning and visualization process

Bintao Wu, Z. Pan, Hengrui Li, 2024, Journal of Manufacturing Processes.

Enhancing strength, ductility, and fatigue performance of Al-Zn-Mg-Cu-Sc-Zr alloy using a hybrid approach: wire-arc directed energy deposition and interlayer friction stir processing

Z. Pan, Peng Xue, D. Ni, 2023, Journal of Materials Processing Technology.

Automatic Rebar Counting using Image Processing and Machine Learning

Han Wang, Zengxi Pan, Joseph Polden, 2019, 2019 IEEE 9th Annual International Conference on CYBER Technology in Automation, Control, and Intelligent Systems (CYBER).