X. Ren

发表

Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel

Lai‐Chang Zhang, Jinzhong Lu, K. Luo, 2010 .

Theoretical Analysis and Experimental Research on the Braced Stress of Vacuum Glazing

Chaojun Yang, De Jun Kong, Hong Miao, 2007 .

LSP Numerical Simulation

X. Ren, 2015 .

Comparison of the simulation and experimental fatigue crack behaviors in the nanoseconds laser shocked aluminum alloy

X. Ren, K. Chen, Y. Jiang, 2011 .

Morphology selective preparation and formation mechanism of graphene nanoribbons from graphite by liquid-phase pulsed laser ablation

X. Ren, R. Liu, L. M. Zheng, 2016 .

Surface nano-crystallization of AZ91D magnesium alloy induced by laser shock processing

X. Ren, F. F. Liu, Huang Jianyu, 2015 .

Magnet-assisted laser hole-cutting in magnesium alloys with and without water immersion

X. Ren, N. Ren, Houxiao Wang, 2021 .

Fatigue behavior of double-sided laser shock peened Ti-6Al-4V thin blade subjected to foreign object damage

X. Ren, Zhaopeng Tong, Yu Yang, 2020 .

Laser Shocking Nano-Crystallization and High-Temperature Modification Technology

X. Ren, 2015 .

Laser Shock Processing at Elevated Temperature

X. Ren, 2015 .

High temperature mechanical properties and surface fatigue behavior improving of steel alloy via laser shock peening

X. Ren, L. M. Zheng, Y. Wang, 2014 .

Mechanical properties and residual stresses changing on 00Cr12 alloy by nanoseconds laser shock processing at high temperatures

Y. Zhang, X. Ren, D. Jiang, 2011 .

Effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engine blades manufactured by LY2 aluminum alloy

Huixue Yao, Hongbing Yao, X. Ren, 2009 .

Influence of LSP on Stress Intensity Factor of Hole-Edge Crack

X. Ren, 2015 .

Dislocation polymorphism transformation of 6061-T651 aluminum alloy processed by laser shock processing: Effect of tempering at the elevated temperatures

Jianzhong Zhou, X. Ren, L. M. Zheng, 2013 .

Investigation of the stress intensity factor changing on the hole crack subject to laser shock processing

X. Ren, Lingjiu Zhou, Y. K. Zhang, 2009 .

Effect of laser shock processing on the fatigue crack initiation and propagation of 7050-T7451 aluminum alloy

Y. Zhang, X. Ren, D. Jiang, 2011 .

The characteristics investigation under the unsteady cavitation condition in a centrifugal pump

Jianping Yuan, Shouqi Yuan, Banglun Zhou, 2017 .

Modification of surface characteristics and electrochemical corrosion behavior of laser powder bed fused stainless-steel 316L after laser polishing

X. Ren, F. Pfefferkorn, B. Richter, 2020 .

Surface roughness control of LY2 aluminum alloy milled surface subjected to laser shock wave planishing processing

Jianzhong Zhou, X. Ren, X. Hua, 2019, Applied Surface Science.

Finite element analysis of laser shock peening induced near-surface deformation in engineering metals

Enoch Asuako Larson, X. Ren, Zhaopeng Tong, 2019, Optics & Laser Technology.

Experimental investigation on dynamic characteristics and strengthening mechanism of laser-induced cavitation bubbles.

X. Ren, R. Liu, Y. P. Ren, 2016, Ultrasonics sonochemistry.

Experimental Investigation on Residual Stress of Model S1100 of Crankshaft Chamfer Based on XRD

Jinzhong Lu, Y. Zhang, X. Ren, 2007 .

High Dense Compressive Residual Stress Produced in Laser Shock Processing on Ti6Al4V Alloys

Y. Zhang, Jianzhong Zhou, X. Ren, 2007 .

Impact of solid particles on cavitation behaviors and laser-induced degradation in aqueous suspension

X. Ren, Hongfeng Zhang, Chunhui Luo, 2021, Ultrasonics sonochemistry.

Laser cavitation peening of gray cast iron: Effect of coverage layer on the surface integrity

X. Ren, Jiayang Gu, Pingchuan Ma, 2020 .

Experimental research on plastic deformation of metal foil through ns laser-induced mechanical effects underwater

X. Ren, Y. Hua, Yunxia Ye, 2021 .

Conversion Model of Graphite

X. Ren, 2015 .

A conversion model of graphite to ultrananocrystalline diamond via laser processing at ambient temperature and normal pressure

X. Ren, L. M. Zheng, N. Ren, 2014 .

Graphite to ultrafine nanocrystalline diamond phase transition model and growth restriction mechanism induced by nanosecond laser processing

X. Ren, R. Liu, L. M. Zheng, 2015 .

Hole-like surface morphologies on the stainless steel surface through laser surface texturing underwater

Jianzhong Zhou, X. Ren, Lin Li, 2018, Applied Surface Science.

Achieving red room temperature afterglow carbon dots in composite matrices through chromophore conjugation degree controlling

X. Ren, Qijun Li, Yunxia Ye, 2020 .

Improvement in cavitation erosion resistance of AA5083 aluminium alloy by laser shock processing

X. Ren, Yuzhou Sun, Zhaopeng Tong, 2019, Surface and Coatings Technology.

Effect of surface morphology and microstructure on the hot corrosion behavior of TiC/IN625 coatings prepared by extreme high-speed laser cladding

X. Ren, C. Chen, Xinzhou Zhang, 2022, Corrosion Science.

Dislocation behavior in nickel and iron during laser shock-induced plastic deformation

X. Ren, Zhaopeng Tong, Yu Yang, 2020 .

High pH-induced efficient room-temperature phosphorescence from carbon dots in hydrogen-bonded matrices

X. Ren, Dongmei Yue, Wei Zhao, 2018 .

Influence of laser power on interface characteristics and cracking behavior during laser remanufacturing of nodular cast iron

X. Ren, S. Dong, Binshi Xu, 2021 .

High-sensitivity detection of chlorothalonil via terahertz metasensor

X. Ren, Jianquan Yao, L. Liang, 2020, Materials Research Express.

High temperature wear performance of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy subjected to laser shock peening

X. Ren, Zhaopeng Tong, F. Dai, 2018, Materials Science and Technology.

Time‐Dependent Phosphorescence Colors from Carbon Dots for Advanced Dynamic Information Encryption

Zikang Tang, X. Ren, S. Qu, 2021, Advanced materials.

Tensile behavior of nickel with gradient microstructure produced by laser shock peening

X. Ren, Zhaopeng Tong, Yu Yang, 2020 .

Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium alloy

Jinzhong Lu, X. Ren, C. Cui, 2010 .

Initial dislocation density effect on strain hardening in FCC aluminium alloy under laser shock peening

X. Ren, N. Ren, S. Adu-Gyamfi, 2017 .

Nanocrystallization in the duplex Ti-6Al-4V alloy processed by multiple laser shock peening

X. Ren, Fanfan Liu, Lin Li, 2016 .

Effect of laser shock peening on wear behaviors of TC11 alloy at elevated temperature

Lin Li, X. Ren, F. Dai, 2019, Optics & Laser Technology.

Achieving excellent wear and corrosion properties in laser additive manufactured CrMnFeCoNi high-entropy alloy by laser shock peening

X. Ren, Zhaopeng Tong, Yu Yang, 2021 .

Microstructure and corrosion resistance of TiC/Inconel 625 composite coatings by extreme high speed laser cladding

X. Ren, Pengfei Gu, Lan Chen, 2022, Optics & Laser Technology.

High-temperature oxidation behavior and mechanism of Inconel 625 super-alloy fabricated by selective laser melting

X. Ren, Lin Li, Yuzhou Sun, 2020 .

Improvement of high temperature oxidation resistance of additively manufactured TiC/Inconel 625 nanocomposites by laser shock peening treatment

X. Ren, Lin Li, Yuzhou Sun, 2020 .

Effect of heat treatment on the microstructure and high temperature oxidation behavior of TiC/Inconel 625 nanocomposites fabricated by selective laser melting

X. Ren, Lin Li, Yuzhou Sun, 2020, Corrosion Science.

Microstructure and microhardness of fiber laser butt welded joint of stainless steel plates

Tao Liu, X. Ren, C. Cui, 2013 .

Preparation of phosphate conversion coating on laser surface textured surface to improve corrosion performance of magnesium alloy

X. Ren, Yu Yang, Xuyang Pan, 2021 .

Interface phase evolution during laser cladding of Ni-Cu alloy on nodular cast iron by powder pre-placed method

X. Ren, S. Dong, P. He, 2021 .

Microstructure, microhardness and residual stress of laser additive manufactured CoCrFeMnNi high-entropy alloy subjected to laser shock peening

X. Ren, Zhaopeng Tong, Yu Yang, 2020 .

Improving electrochemical corrosion properties of AZ31 magnesium alloy via phosphate conversion with laser shock peening pretreatment

X. Ren, Zhaopeng Tong, Yu Yang, 2020 .

Improving stress corrosion cracking resistance of AZ31 magnesium alloy in Hanks’ solution via phosphate conversion with laser shock peening pretreatment

D. Yang, X. Ren, Zhaopeng Tong, 2022, Materials Today Communications.

Effect of Laser Surface Texturing Depth and Pattern on the Bond Strength and Corrosion Performance of Phosphate Conversion Coating on Magnesium Alloy

X. Ren, Zhaopeng Tong, Jiayang Gu, 2022, SSRN Electronic Journal.

Laser additive manufacturing of CrMnFeCoNi high entropy alloy: Microstructural evolution, high-temperature oxidation behavior and mechanism

X. Ren, Yu Yang, Wangfan Zhou, 2020 .

Microstructure evolution and lubricant wear performance of laser alloyed layers on automobile engine chains

X. Ren, G. Yuan, Kai Wang, 2014 .

Study on transient characteristics and influencing of temperature on cavitation bubbles in various environments

Enoch Asuako Larson, X. Ren, Hongfeng Zhang, 2019, Optik.

Surface integrity of 2A70 aluminum alloy processed by laser-induced peening and cavitation bubbles

Enoch Asuako Larson, X. Ren, S. Adu-Gyamfi, 2019, Results in Physics.

Novel morphologies and growth mechanism of Cr2O3 oxide formed on stainless steel surface via Nd: YAG pulsed laser oxidation

X. Ren, C. Cui, Yanji Wang, 2015 .

Thermal stability of surface nano-crystallization layer in AZ91D magnesium alloy induced by laser shock peening

X. Ren, Lin Li, Huang Jianyu, 2018 .

Improving the strength and ductility of laser directed energy deposited CrMnFeCoNi high-entropy alloy by laser shock peening

X. Ren, Zhaopeng Tong, Yu Yang, 2020 .

Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property

Enoch Asuako Larson, X. Ren, Zhaopeng Tong, 2019, Journal of Alloys and Compounds.

The effects of residual stress on fatigue behavior and crack propagation from laser shock processing-worked hole

Hongyu Yang, Xudong Ren, Sun Guifang, 2013 .

In situ TiC/Inconel 625 nanocomposites fabricated by selective laser melting: Densification behavior, microstructure evolution, and wear properties

X. Ren, Lin Li, Yuzhou Sun, 2020 .

Microstructure evolution, mechanical properties, and strengthening mechanism of TiC reinforced Inconel 625 nanocomposites fabricated by selective laser melting

X. Ren, Lin Li, Yuzhou Sun, 2020, Materials Science and Engineering: A.

Simulation, microstructure and microhardness of the nano-SiC coating formed on Al surface via laser shock processing

Y. M. Wang, X. Ren, C. Cui, 2014 .

Deformation microstructures of austenitic stainless steel 2Cr13Mn9Ni4 under ultrafast strain rate by laser shock processing

X. Ren, Kangmin Chen, X. Luo, 2013 .

Microstructure evolution and grain refinement of Ti-6Al-4V alloy by laser shock processing

Yunpeng Ren, Xudong Ren, X. Ren, 2016 .

A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH4169

Sun Guifang, X. Ren, Jun Zhou, 2014 .

Effects of laser shock peening with contacting foil on micro laser texturing surface of Ti6Al4V

X. Ren, Shu Huang, F. Dai, 2018 .

Wear resistance of 20Cr2Ni4A alloy steel treated by laser shock peening and implantation of diamond nanoparticles

X. Ren, Hao Zhu, Zhiduo Xin, 2021 .

Study on processing and strengthening mechanisms of mild steel subjected to laser cavitation peening

X. Ren, Chunhui Luo, Pingchuan Ma, 2021 .

Effect of laser shock peening and carbonitriding on tribological properties of 20Cr2Mn2Mo steel alloy under dry sliding conditions

X. Ren, Hao Zhu, Yunpeng Ren, 2021, Surface and Coatings Technology.

Direct transfer-adsorption: The new molecular dynamics transition mechanism of nano-diamond preparation by laser shock processing

X. Ren, L. M. Zheng, N. Ren, 2015 .

Friction and wear on laser textured Ti6Al4V surface subjected to laser shock peening with contacting foil

X. Ren, Shu Huang, J. Geng, 2018, Optics & Laser Technology.

Plastic-deformation-driven SiC nanoparticle implantation in an Al surface by laser shock wave: Mechanical properties, microstructure characteristics, and synergistic strengthening mechanisms

Jinzhong Lu, K. Luo, Jianzhong Zhou, 2017 .

Effect of TiC on the high-temperature oxidation behavior of WMoTaNbV refractory high entropy alloy fabricated by selective laser melting

X. Ren, Xinzhou Zhang, Lan Chen, 2022, International Journal of Refractory Metals and Hard Materials.

Cracking mechanism of brittle FeCoNiCrAl HEA coating using extreme high-speed laser cladding

Peng Liu, X. Ren, Yong Li, 2021 .

A coupled ray-tracing based CFD and cellular automaton model for predicting molten pool formation and microstructure evolution in narrow gap laser welding

X. Ren, Lin Li, Heng Gu, 2023, International Journal of Heat and Mass Transfer.

Investigation on laser cavitation micro-forming process: Deformation behavior of 1060 aluminum foil and bubble evolution in a gap

X. Ren, C. Luo, Gu Jiayang, 2021, Journal of Manufacturing Processes.

Mechanical effect of laser-induced cavitation bubble of 2A02 alloy

X. Ren, C. Zuo, Hang Zhang, 2018, Optics & Laser Technology.

Microstructural evolution and mechanical properties of selective laser melted a nickel-based superalloy after post treatment

X. Ren, Lin Li, Yuzhou Sun, 2020 .

Evolution of microstructure and grain refinement mechanism of pure nickel induced by laser shock peening

X. Ren, Zhaopeng Tong, S. Adu-Gyamfi, 2018, Materials Science and Engineering: A.

Microstructure, mechanical properties and corrosion behavior of Ce doped TiN films

X. Ren, H. Cui, Yanlai Wang, 2021, Applied Surface Science.

Online detection of laser paint removal based on laser-induced breakdown spectroscopy and the K-nearest neighbor method

X. Ren, Y. Tong, Jianfeng Liu, 2022, Journal of laser applications.

Electrochemical Corrosion Behavior of 5083 Aluminum Alloy Subjected to Laser Shock Peening

Enoch Asuako Larson, Xudong Ren, Xueqing Yang, 2019, Journal of Materials Engineering and Performance.

DEFORMATION ANALYSIS OF H62 Cu ALLOY FOIL SUBJECTED TO MULTI-PULSED LASER DYNAMIC FORMING: SIMULATIONS

X. Ren, Shu Huang, J. Geng, 2020, Surface Review and Letters.

Investigation on the vibration and flow instabilities induced by cavitation in a centrifugal pump

Shouqi Yuan, Jianping Yuan, Qiaorui Si, 2017 .

Strengthening mechanisms and tensile properties of 20Cr2Mn2Mo processed by laser shock peening and vacuum carbonitriding

X. Ren, Zhiduo Xin, Yunxia Ye, 2022, Surface and Coatings Technology.

Delamination in titanium-based carbon-fibre/epoxy laminates under laser shock peening

X. Ren, Zhaopeng Tong, Yu Yang, 2021 .

Iron GH2036 alloy residual stress thermal relaxation behavior in laser shock processing

X. Ren, N. Ren, S. D. Xu, 2015 .

Effects of laser shock processing on 00Cr12 mechanical properties in the temperature range from 25 °C to 600 °C

X. Ren, H. Guan, X. Qian, 2010 .

The effects of laser shock peening scanning patterns on residual stress distribution and fatigue life of AA2024 aluminium alloy

Enoch Asuako Larson, X. Ren, S. Adu-Gyamfi, 2018, Optics & Laser Technology.

Effect of laser shock peening on microstructure and hot corrosion of TC11 alloy

X. Ren, Zhaopeng Tong, F. Dai, 2018 .

Degradation of Rhodamine B in aqueous solution by laser cavitation.

X. Ren, Hongfeng Zhang, Zhaopeng Tong, 2020, Ultrasonics sonochemistry.

Effect of laser spot size on the residual stress field of pure Al treated by laser shock processing: Simulations

Jianzhong Zhou, X. Ren, Jun Zhou, 2014 .

Effect of laser shock peening on microstructure and mechanical properties of TiC strengthened inconel 625 alloy processed by selective laser melting

X. Ren, Yuzhou Sun, T. Ge, 2022, Materials Science and Engineering: A.

Real-time observation with metallurgical examination for laser percussion drilling in stainless steel sheets using simultaneous magnetic-ultrasonic assistance

X. Ren, N. Ren, Houxiao Wang, 2021, Optics Communications.

Laser drilling in nickel super-alloy sheets with and without ultrasonic assistance characterized by transient in-process detection with indirect characterization after hole-drilling

X. Ren, N. Ren, Houxiao Wang, 2021 .

Ultra-Wideband Low-Loss Control of Terahertz Scatterings via an All-Dielectric Coding Metasurface

X. Ren, Jianquan Yao, Jie Li, 2020 .

A model for reliability and confidence level in fatigue statistical calculation

Tian Zhang, Yan Zhang, Sun Guifang, 2012 .

Phase filed simulation of dendritic growth of copper films irradiated by ultrashort laser pulses

X. Ren, N. Ren, Yunpeng Ren, 2018, Computational Materials Science.

Experimental characterization and real-time monitoring for laser percussion drilling in titanium alloy using transverse electric field assistance and/or lateral air blowing

X. Ren, N. Ren, Houxiao Wang, 2021 .

Influence of compressive stress on stress intensity factor of hole-edge crack by high strain rate laser shock processing

X. Ren, Lingjiu Zhou, Jing-dong Zhou, 2009 .

Effects of scanning path gradient on the residual stress distribution and fatigue life of AA2024-T351 aluminium alloy induced by LSP

Samuel Adu-Gyamfi, Enoch Asuako Larson, Xudong Ren, 2019, Results in Physics.

Metallographic structure evolution of 6061-T651 aluminum alloy processed by laser shock peening: Effect of tempering at the elevated temperatures

X. Ren, L. M. Zheng, F. Dai, 2013 .

Dislocation evolution and properties enhancement of GH2036 by laser shock processing: Dislocation dynamics simulation and experiment

Yunpeng Ren, Xudong Ren, Naifei Ren, 2016 .

Ultrasound-assisted pulsed laser drilling for fabricating high quality microholes

Xudong Ren, Naifei Ren, Houxiao Wang, 2017, 2017 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR).

Micro-dent arrays fabricated by a novel net mask laser shock processing on the surface of LY2 aluminum alloy

Jinzhong Lu, K. Luo, X. Ren, 2012 .

Researches on the curvature adjustment of metal sheet induced by laser shock forming through experiments and simulations

X. Ren, Yunxia Ye, Yunpeng Ren, 2020 .

Experimental and numerical investigation of bubble oscillation and jet impact near a solid boundary

X. Ren, Zhang Hongfeng, Lu Zhubi, 2021 .

Study on pulsation characteristics of laser-induced cavitation bubble and its degradation of acid black solution

X. Ren, Jiayang Gu, Huaile Liu, 2023, Optics & Laser Technology.

Study on Deformation Behaviors of LD31 (6063) Aluminum Alloy Sheet by Oblique Angle Laser Shock

Jianzhong Zhou, X. Ren, A. Feng, 2006 .

Graphene–polyimide-integrated metasurface for ultrasensitive modulation of higher-order terahertz fano resonances at the Dirac point

X. Ren, Jianquan Yao, Jie Li, 2021 .

Position-guided Fano resonance and amended GaussAmp model for the control of slow light in hybrid graphene-silicon metamaterials.

X. Ren, Jianquan Yao, Yunxia Ye, 2020, Optics express.

Fatigue behaviors of foreign object damaged Ti-6Al-4V alloys under laser shock peening

X. Ren, Zhaopeng Tong, Yu Yang, 2020 .

A method to decrease surface roughness in laser shock processing

X. Ren, X. Hua, Jun Zhou, 2015 .

Dynamic response of surface micro-features subjected to a laser shock wave planishing technique

X. Ren, Shu Huang, J. Geng, 2018 .

Residual stress induced convex bending in laser peen formed aluminum alloy

Enoch Asuako Larson, X. Ren, C. C. Wang, 2018 .

Effect of laser shock peening without protective coating on surface integrity of titanium-based carbon-fibre/epoxy laminates

X. Ren, Zhaopeng Tong, Yu Yang, 2023, Optics & Laser Technology.

Characteristics of stress distribution within the metal sheet bent by laser shock forming

X. Ren, Lin Li, Y. Hua, 2019, Materials Research Express.

Laser shock deforming and induced microstructure evolution of austenitic stainless steel sheet

X. Ren, Kangmin Chen, Yongkang Zhang, 2010 .

Effects of laser shock peening post-treatment on microstructure and corrosion resistance of phosphate conversion coatings

X. Ren, Zhaopeng Tong, Huaile Liu, 2023, Optics & Laser Technology.

Effects of different contact film thicknesses on the surface roughness evolution of LY2 aluminum alloy milled surface subjected to laser shock wave planishing

X. Ren, X. Hua, Xizhang Chen, 2020 .

Dislocation behavior in nickel and iron during laser shock-induced plastic deformation

X. Ren, Zhaopeng Tong, Yu Yang, 2019, The International Journal of Advanced Manufacturing Technology.

Dynamic thermal response of aluminum films induced by femtosecond-pulsed lasers with temperature dependent optical properties

X. Ren, Lin Li, N. Ren, 2017 .

Effect of Laser Shock Processing Residual Stress on Pellet Traveling Grate Surface Crack

X. Ren, A. Feng, Y. K. Zhang, 2012 .

Influence of compound laser life-extension treatment on mechanical properties of key parts of pellet traveling grate

Ai Xin Feng, Yunlei Zhang, Xingquan Zhang, 2008, Photonics and Optoelectronics Meetings.