C. Turner

发表

A TWO DIMENSIONAL DYNAMIC LINEAR ELASTIC FINITE ELEMENT PROGRAM FOR THE ANALYSIS OF UNSTABLE CRACK PROPAGATION AND ARREST

J. L. Head, Keegstra P.N.R., C. Turner, 1978 .

An Investigation of the I and dJ/da Concepts for Ductile Tearing Instability

Etemad, C. Turner, 1986 .

Method for Laboratory Determination of J c

C. Turner, J. Sumpter, 1976 .

An improved collapse axis on the R6 FAD for combined tension and bending loading

C. Turner, N. Kristiansen, 1993 .

Prediction of settled cyclic behaviour of metals using first cycle data and combined hardening laws for reversed plasticity

C. Turner, V. O. Oloyede, 1994 .

Design using elastic-plastic fracture mechanics

C. Turner, J. Sumpter, 1976, International Journal of Fracture.

Theory of thin elastic shells applied to pipe bends subjected to bending and internal pressure

C. Turner, J. Blomfield, 1972 .

Slow stable crack growth in structural steel

C. Turner, S. Garwood, 1978 .

The meaning of elastic-plastic fracture criteria during slow crack growth

P. L. Pratt, C. Turner, A. Willoughby, 1981, International Journal of Fracture.

Designing against fracture in brittle plastics

C. Turner, J. Williams, J. Radon, 1968 .

Fracture toughness and absorbed energy measurements in impact tests on brittle materials

J. G. Williams, G. P. Marshall, C. E. Turner, 1973 .

Workshop 4 A J-Based Fracture Safe Estimation Procedure, EnJ., with Applications Including Estimation of the Maximum Load for Ductile Tearing.

C. Turner, 1985 .

Fracture toughness measurements by instrumented impact test

C. E. Turner, J. Radon, C. Turner, 1969 .

An application of finite element techniques to post-yield analysis of proposed standard three-point bend fracture test pieces

C. E. Turner, D. J. Hayes, C. Turner, 1974 .

Relevance of Nonlinear Fracture Mechanics to Creep Cracking

C. Turner, G. Webster, K. Nikbin, 1976 .

Application of fracture mechanics to creep crack growth

C. Turner, G. Webster, 1974 .

A J-Integral Approach to Development of η -Factors

Pc Paris, P. C. Paris, C. Turner, 1980 .

The Ubiquitous η Factor

C. Turner, Ce Turner, 1980 .

The measurement of crack growth resistance curves (R-curves) using the J integral

C. Turner, J. N. Robinson, S. Garwood, 1975, International Journal of Fracture.

ON THE BLUNTING LINE AND INITIATION TO TEARING FOR TWO STEELS

C. Turner, Yungang Wei, M. Etemad, 2013 .

A Review of Elasto-Plastic Fracture Design Methods and Suggestions for a Related Hierarchy of Procedures to Suit Various Structural Uses

C. E. Turner, C. Turner, 1983 .

Workshop 3. The Cod Method for Assessing the Significance of Defects

C. E. Turner, C. Turner, 1985 .

A MICRO AND MACRO APPROACH TO THE ENERGY DISSIPATION RATE MODEL OF STABLE DUCTILE CRACK GROWTH

C. Turner, O. Kolednie, 1994 .

THE USE OF THE J INTEGRAL TO MEASURE THE RESISTANCE OF MILD STEEL TO SLOW STABLE CRACK GROWTH

C. Turner, S. Garwood, 1978 .

Fully plastic ductile tearing of HY130 steel—an analysis by J, COD, energy rate and crack opening angle

C. Turner, M. Dagbasi, 1995 .

Geometry independent R-curves in a titanium alloy using a normalised axis for crack growth

C. Turner, S. John, 1990 .

Yielding fracture mechanics

C. Turner, 1975 .

Fracture toughness measurements on low strength structural steels

J. Radon, C. Turner, 2013 .

A Comparison of Methods of Correlating Creep Crack Growth

C. Turner, G. Webster, K. Nikbin, 2013 .

Description of Stable and Unstable Crack Growth in the Elastic Plastic Regime in Terms of Jr Resistance Curves

C. Turner, 1979 .