P. Jain

发表

DESIGN VERIFICATION THROUGH TOLERANCE STACK UP ANALYSIS OF MECHANICAL ASSEMBLY AND LEAST COST TOLERANCE ALLOCATION

Pramod Kumar Jain, Satish C. Sharma, A. K. Sahani, 2014 .

Important issues in tolerance design of mechanical assemblies. Part 2: Tolerance synthesis

P. Jain, P. K. Singh, S. C. Jain, 2009 .

MANUFACTURING INDUSTRIES: AN OVERVIEW

P. Jain, N. Rathore, 2014 .

EMPIRICAL MODELLING OF MRR IN ELECTROCHEMICAL-MECHANICAL FINISHING OF BEVEL GEARS

J. P. Misra, D. K. Dwivedi, P. Jain, 2014 .

Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel

D. I. Lalwani, P. Jain, D. Lalwani, 2008 .

Experimental study on drilling characteristics of the hybrid sisal–jute fibre epoxy composites

P. Jain, H. Singh, B. Dewangan, 2021, Journal of Micromanufacturing.

An integrated methodology to overcome barriers to climate change mitigation strategies: a case of the cement industry in India

P. Jain, Sachin Balsara, A. Ramesh, 2021, Environmental Science and Pollution Research.

Analyzing Enablers of Emission Reduction Strategies of Cement-manufacturing Industry of India under Fuzzy Environment

P. Jain, Sachin Balsara, A. Ramesh, 2019, Advances in Simulation, Product Design and Development.

An integrated approach using AHP and DEMATEL for evaluating climate change mitigation strategies of the Indian cement manufacturing industry.

P. Jain, Sachin Balsara, A. Ramesh, 2019, Environmental pollution.

Chemical reaction optimization algorithm for machining parameter of abrasive water jet cutting

P. Jain, H. Singh, Saurabh Pratap, 2021, OPSEARCH.

Modeling for control of HCCI engines

Gregory M. Shaver, P. A. Caton, Christopher F. Edwards, 2003, Proceedings of the 2003 American Control Conference, 2003..

Transient Numerical Simulation of Solidification in Continuous Casting Slab Caster

P. Jain, P. Jha, V. Gupta, 2021, Lecture Notes in Mechanical Engineering.

Effect of Vacuum Residue on Rheological Properties of Low Viscosity Bituminous Binders for Road Construction

P. Jain, Khusboo Arora, S. S. Kar, 2014 .

Tactical supply chain planning for tyre remanufacturing considering carbon tax policy

P. Jain, A. Sharma, L. Saxena, 2018 .

Impact of recycled asphalt pavement on properties of foamed bituminous mixtures

P. Jain, A. Swamy, S. S. Kar, 2018 .

Green chemistry: Petal sap of Delonix regia as a substitute for hazardous internal indicators in volumetric analysis

P. Jain, P. Jain, Prajvi Jain, 2013 .

On the Drainage of Irrigated Lands Under Sequential Water Application

P. Jain, D. Hillel, G. Sinai, 1987 .

Impact of Reconfiguration Effort on Reconfigurable Manufacturing System

P. K. Jain, P. Jain, K. K. Mittal, 2014 .

Characterization and Strain-Hardening Behavior of Friction Stir-Welded Ferritic Stainless Steel

D. K. Dwivedi, P. Jain, G. Sharma, 2017, Journal of Materials Engineering and Performance.

Impact of low viscosity grade bitumen on foaming characteristics

P. Jain, A. Swamy, S. S. Kar, 2018 .

Impact of binder on properties of foamed bituminous mixtures

P. Jain, A. Swamy, S. S. Kar, 2017 .

A fuzzy goal programme–based sustainable Greenfield supply network design for tyre retreading industry

P. Jain, A. Sharma, Lokesh Kumar, 2020, The International Journal of Advanced Manufacturing Technology.

Supply Chain Modelling Under Uncertainty: A Supplier’s Perspective

P. K. Jain, P. Jain, S. Maheshwari, 2015 .

Impact of Chemical Composition on Foaming Characteristics of Asphalt Binder

P. Jain, A. Swamy, S. S. Kar, 2020 .

Tactical supply chain planning for tyre remanufacturing considering carbon tax policy

P. Jain, A. Sharma, L. Saxena, 2018, The International Journal of Advanced Manufacturing Technology.

On wire breakage and microstructure in WEDC of SiCp/6061 aluminum metal matrix composites

P. Jain, N. Jain, P. Shandilya, 2012 .

Effect Of Slate Pencil Dust Pollution On Leaf Morphology Of Triticum Aestivum (L), Linum Usitatissimum (Forsk.) AND Plantago Ovata (L).

P. Jain, P. Jain, 2014 .

Bibliometric Survey on Supply Chain in Healthcare using Artificial Intelligence

P. Jain, K. Kotecha, Gagandeep Kaur, 2020 .

Correlation studies in fenugreek (Trigonella foenum-graecum L.)

P. Jain, K. Singh, S. Sengupta, 2013 .

Investigation on the combined effect of ZnO nanorods and Y2O3 nanoparticles on the microstructural and mechanical response of aluminium

P. Jain, Saurabh Pratap, M. Gupta, 2021, Advanced Composite Materials.

Carbon-carbon composites made with oxidised PAN (Panex) fibers

T. L. Dhami, P. Jain, O. P. Bahl, 1995 .

Effect of carbon fiber type on the mechanical performance of carbon/carbon composites

P. Jain, O. P. Bahl, L. Manocha, 1992 .

Abrasive wear behaviour of continuously compacted thermal-sprayed Ni base alloy powder coatings in different conditions

D. K. Dwivedi, P. Jain, Sattainathan Sharma, 2008 .

Effect of La2O3 addition on the microstructure, hardness and abrasive wear behavior of flame sprayed Ni based coatings

P. K. Jain, Dheerendra Kumar Dwivedi, D. K. Dwivedi, 2009 .

Effect of CeO2 addition on the microstructure, hardness, and abrasive wear behaviour of flame-sprayed Ni-based coatings

D. K. Dwivedi, P. Jain, S. Sharma, 2008 .

RSM and ANN Modeling Approaches For Predicting Average Cutting Speed During WEDM of SiCp/6061 Al MMC

Neelesh Kumar Jain, Pragya Shandilya, P. K. Jain, 2013 .

Remanufacturing with ECH – A Concept

Pramod Kumar Jain, Harpreet Singh, P. Jain, 2014 .

Study on ultrasonic-assisted electrochemical honing of bevel gears

Pramod Kumar Jain, Harpreet Singh, P. Jain, 2018 .

Extension of Oxley's predictive machining theory for Johnson and Cook flow stress model

P. K. Jain, N. K. Mehta, D. I. Lalwani, 2009 .

Smart Manufacturing Process of Carbon-Based Low-Dimensional Structures and Fiber-Reinforced Polymer Composites for Engineering Applications

P. Jain, C. Bowen, A. Pegoretti, 2020, Journal of Materials Engineering and Performance.

Optimization of Recycled Asphalt Pavement in Cold Emulsified Mixtures by Mechanistic Characterization

Sravani Arimilli, M. N. Nagabhushana, Pramod Kumar Jain, 2016 .

Machining with minimum quantity lubrication: a step towards green manufacturing

Pramod Kumar Jain, N. K. Mehta, Vikas Upadhyay, 2013 .

Study and model development of erosive wear by RSM

D. K. Dwivedi, P. Jain, S. Sharma, 2012 .

Variability in the nutraceutical properties of fenugreek (Trigonella foenum-graecum L.) seeds

P. Jain, K. Singh, S. Paroha, 2014 .

A hybrid salp swarm algorithm based on TLBO for reliability redundancy allocation problems

P. Jain, Tanmay Kundu, Deepmala, 2022, Applied Intelligence.

Cell formation in the presence of reconfigurable machines

P. K. Jain, N. K. Mehta, L. N. Pattanaik, 2007 .

APPLYING SWARM INTELLIGENCE TO DESIGN THE RECONFIGURABLE FLOW LINES

Madhu Jain, P. K. Jain, Kapil Kumar Goyal, 2013 .

Parametric Optimization During Wire Electrical Discharge Machining using Response Surface Methodology

Neelesh Kumar Jain, Pragya Shandilya, P. K. Jain, 2012 .

Optimization of Key Process Parameters on Electro Chemical Honing (ECH) of External Cylindrical Surfaces of Titanium alloy Ti 6Al 4V

P. S. Rao, D. K. Dwivedi, P. Jain, 2017 .

ELECTRO CHEMICAL HONING (ECH) PROCESS

D. K. Dwivedi, P. Jain, Sudhakar Rao, 2016 .

International Symposium on Intelligent Manufacturing and Automation , DAAAM 2014 Electro Chemical Honing ( ECH ) of External Cylindrical Surfaces of Titanium Alloys

P. S. Rao, D. K. Dwivedi, P. Jain, 2015 .

Configuration selection of reconfigurable manufacturing system based on performance

Pramod Kumar Jain, Dinesh Kumar, Ashutosh Gupta, 2015 .

Surface Modification of Cast Al-17%Si Alloys Using Friction Stir Processing

D. K. Dwivedi, P. Jain, H. Singh, 2015 .

A fuzzy goal programme with carbon tax policy for Brownfield Tyre remanufacturing strategic supply chain planning

Pramod Kumar Jain, Lokesh Kumar Saxena, P. Jain, 2018, Journal of Cleaner Production.

Advanced optimal tolerance design of mechanical assemblies with interrelated dimension chains and process precision limits

Satish C. Jain, Pramod K. Jain, Pradeep K. Singh, 2005, Comput. Ind..

Design of reconfigurable flow lines using MOPSO and maximum deviation theory

P. Jain, Kapil Kumar Goyal, 2015, The International Journal of Advanced Manufacturing Technology.

Design of reconfigurable flow lines using MOPSO and maximum deviation theory

Pramod Kumar Jain, Kapil Kumar Goyal, P. Jain, 2015 .

An Overview of Performance Measures in Reconfigurable Manufacturing System

Kamal Kumar Mittal, Pramod Kumar Jain, P. Jain, 2014 .

Configuration selection in reconfigurable manufacturing system based on reconfigurability

Kamal Kumar Mittal, Pramod Kumar Jain, Dinesh Kumar, 2017 .

Optimum configuration selection in Reconfigurable Manufacturing System involving multiple part families

Dinesh Kumar, Faisal Hasan, P. K. Jain, 2014 .

Machine Reconfigurability Models Using Multi-Attribute Utility Theory and Power Function Approximation

Dinesh Kumar, P. K. Jain, Faisal Hasan, 2013 .

A novel methodology to measure the responsiveness of RMTs in reconfigurable manufacturing system

Pramod Kumar Jain, Madhu Jain, Kapil Kumar Goyal, 2013 .

Part family formation for reconfigurable manufacturing system using K-means algorithm

Pramod Kumar Jain, Dinesh Kumar, Ashutosh Gupta, 2014 .

Ontology Development and Agent Communication in Agent-Based Simulation of AGVS

Pramod Kumar Jain, N. K. Mehta, V. R. Komma, 2012 .

AGENT-BASED SIMULATION OF A SHOP FLOOR CONTROLLER USING HYBRID COMMUNICATION PROTOCOLS

Pramod Kumar Jain, N. K. Mehta, V. R. Komma, 2007 .

In-process prediction of surface roughness in turning of Ti–6Al–4V alloy using cutting parameters and vibration signals

Pramod Kumar Jain, N. K. Mehta, Vikas Upadhyay, 2013 .

Rutting in Flexible Pavement: An Approach of Evaluation with Accelerated Pavement Testing Facility

Pramod Kumar Jain, Shahbaz Khan, Devesh Tiwari, 2013 .

A novel approach for part family formation for reconfiguration manufacturing system

P. K. Jain, Dinesh Kumar, Dinesh Kumar, 2014 .

PART-MACHINE GROUP FORMATION WITH ORDINAL-RATIO LEVEL DATA & PRODUCTION VOLUME

L. Kumar, P. K. Jain, P. Jain, 2009 .

PART-MACHINE GROUP FORMATION WITH OPERATION SEQUENCE, TIME AND PRODUCTION VOLUME

J Kumar, P K Jain, P. Jain, 2008 .

An approach for agent modeling in manufacturing on JADE™ reactive architecture

Pramod Kumar Jain, N. K. Mehta, Venkateswara Rao Komma, 2011 .

Study of mechanical and metallurgical characteristics of flame sprayed NiCrBSi as-sprayed and continuous compacted coating

P. Jain, D. Dwivedi, S. Sharma, 2010 .

An integrated model of dynamic cellular manufacturing and supply chain system design

P. K. Jain, Lokesh Kumar Saxena, P. Jain, 2012 .

SERVICE LEVEL AS PERFORMANCE INDICATOR FOR MULTIPLE PART FAMILIES IN A RECONFIGURABLE MANUFACTURING SYSTEM

Dinesh Kumar, P. K. Jain, Faisal Hasan, 2013 .

Service Level as Performance Index for Reconfigurable Manufacturing System Involving Multiple Part Families

Pramod Kumar Jain, Dinesh Kumar, Faisal Hasan, 2014 .

A genetic algorithm-based solution to optimal tolerance synthesis of mechanical assemblies with alternative manufacturing processes: focus on complex tolerancing problems

P. K. Jain, P. K. Singh *, S. C. Jain, 2004 .

CONCURRENTLY PART-MACHINE GROUPS FORMATION WITH IMPORTANT PRODUCTION DATA

J Kumar, P K Jain, P. Jain, 2010 .

Solving multi-objective cell design problem: an evolutionary genetic algorithm approach

N. K. Mehta, Pramod K. Jain, L. N. Pattanaik, 2007, Int. J. Manuf. Technol. Manag..

Experimental Study Pertaining to Microwave Sintering (MWS) of Al-Metal Matrix Composite - A Review

P. Jain, H. Singh, Saurabh Pratap, 2018, Materials Science Forum.

A novel approach to predict the inclusion removal in a billet caster mold with the use of electromagnetic stirrer

P. Jain, P. Jha, V. Gupta, 2022, Journal of Manufacturing Processes.

Numerical investigation into flow and solidification behavior of billet continuous casting with and without mold electromagnetic stirring

P. Jain, P. Jha, V. Gupta, 2021, Heat Transfer.

Modeling of Wall Shear Stress Induced Inclusion Transport and Removal in Multi-Strand Tundish

P. Jain, P. Jha, Vipul Gupta, 2021, ISIJ International.

Important issues in tolerance design of mechanical assemblies. Part 1: Tolerance analysis

P K Singh, P K Jain, S C Jain, 2009 .

A genetic algorithm based solution to optimum tolerance synthesis of mechanical assemblies with alternate manufacturing processes—benchmarking with the exhaustive search method using the Lagrange multiplier

Satish C. Jain, P K Singh, P K Jain, 2004 .

Characterization of Reclaimed Asphalt Pavement (RAP) for Use in Bituminous Road Construction

Pramod Kumar Jain, T.Anil Pradyumna, Abhishek Mittal, 2013 .

Modelling and process optimisation for wire electric discharge machining of metal matrix composites

Neelesh Kumar Jain, Pragya Shandilya, P. K. Jain, 2016 .

Microwave material processing: a clean, green, and sustainable approach

P. Jain, H. Singh, Saurabh Pratap, 2019, Sustainable Engineering Products and Manufacturing Technologies.

Estimation of Carbon Footprints of Bituminous Road Construction Process

P. Jain, A. Shukla, S. S. Kar, 2015 .

A novel approach for part family formation using K-means algorithm

P. K. Jain, Dinesh Kumar, Dinesh Kumar, 2013 .

Prediction of surface roughness during wire electrical discharge machining of SiC p /6061 Al metal matrix composite

P. K. Jain, Neelesh Kumar Jain, Pragya Shandilya, 2012 .

A Critical Review on Foam and Emulsion Based Cold Recycled Asphalt Mixes

P. Jain, A. Swamy, S. S. Kar, 2017 .

Association of Characters and their Direct and Indirect Contribution for Seed Yield in Fenugreek ( trigonella Foenum Graecum l.) Germplasms

P. Jain, K. Singh, S. Sengupta, 2010 .

Optimal Configuration Selection in Reconfigurable Manufacturing System

Kamal Kumar Mittal, Pramod Kumar Jain, Dinesh Kumar, 2018, Decision Science in Action.

Performance modelling of dispatching strategies under resource failure scenario in reconfigurable manufacturing system

Dinesh Kumar, P. K. Jain, Faisal Hasan, 2014 .

Optimal Design of Reconfigurable Flow Lines

Madhu Jain, Kapil Kumar Goyal, P. K. Jain, 2012 .

Multiple Objective Optimization of Reconfigurable Manufacturing System

Madhu Jain, Pramod K. Jain, Kapil Kumar Goyal, 2011, SocProS.

Developments in abrasive water jet machining process—from 1980 to 2020

P. Jain, H. Singh, Neeraj Kumar Bhoi, 2021 .

A comprehensive approach to operation sequence similarity based part family formation in the reconfigurable manufacturing system

Madhu Jain, P. K. Jain, Kapil Kumar Goyal, 2013 .

A novel approach to recognize interacting features for manufacturability evaluation of prismatic parts with orthogonal features

Pramod Kumar Jain, Manish Kumar Gupta, Abinash Kumar Swain, 2019, The International Journal of Advanced Manufacturing Technology.

MACHINE ELEMENT RECONSTRUCTION USING INTEGRATED REVERSE ENGINEERING AND RAPID PROTOTYPING APPROACH

Atul Kumar, P. K. Jain, Pushparaj Mani Pathak, 2014 .

Extraction of compound volumetric features from a three-dimensional wire frame model

P K Jain, P. Jain, 1999 .

Manufacturing system development framework using a data models driven approach

Yoshiro Fukuda, P. K. Jain, M. Yamamoto, 2003 .

Simultaneous optimal selection of design and manufacturing tolerances with different stack-up conditions using genetic algorithms

Satish C. Jain, P. K. Jain, Pradeep K. Singh, 2003 .

A STEP AP 203–214-based machinable volume identifier for identifying the finish-cut machinable volumes from rough-machined parts

P. K. Jain, A. Arivazhagan, N. K. Mehta, 2009 .

Prediction of surface roughness using cutting parameters and vibration signals in minimum quantity coolant assisted turning of Ti-6Al-4V alloy

N. K. Mehta, Pramod K. Jain, Vikas Upadhyay, 2013, Int. J. Manuf. Technol. Manag..

Prediction of tribological performance of electrochemical honed bevel gears teeth profile

J. P. Misra, D. K. Dwivedi, P. Jain, 2015 .

Study of electrochemical-mechanical finishing of bevel gears

N. K. Mehta, Pramod K. Jain, J. P. Misra, 2013, Int. J. Manuf. Technol. Manag..

A Study of Influence of Electrolyte Composition on ECH of Bevel Gears using Mixture D-Optimal Design

P. K. Jain, Joy Prakash Misra, Dheerendra Kumar Dwivedi, 2014 .

24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013 Remanufacturing with ECH - A Concept

Pramod Kumar Jain, Harpreet Singh, P. Jain, 2014 .

Study of Time Dependent Behaviour of ECH of Bevel Gears

P. K. Jain, N. K. Mehta, Joy Prakash Misra, 2013 .

Ech of Spur Gears - A Step Towards Commercialization

J. P. Misra, P. Jain, R. Sevak, 2012 .

Electrochemical Honing - a Novel Technique for Gear Finishing

J. P. Misra, D. K. Dwivedi, P. Jain, 2011 .