D. Wang

发表

Truss Optimization on Shape and Sizing with Frequency Constraints

D. Wang, Weihong Zhang, J. S. Jiang, 2004 .

Fatigue experimental analysis and numerical simulation of FSW joints for 2219 Al–Cu alloy

D. Wang, Shujun Chen, Guoqin Sun, 2015 .

Shake Table Testing of a Self-Centering Post-Tensioned Steel Frame

D. Wang, A. Filiatrault, 2008 .

Sensitivity Analysis of Structural Response to External Load Position

D. Wang, 2015 .

Minimum stiffness location of point support for control of fundamental natural frequency of rectangular plate by Rayleigh-Ritz method

D. Wang, Zhiwen Yu, Zhichun Yang, 2010 .

Validation of a nonsmooth discrete element method by confined compression and rod penetration

D. Wang, M. Servin, 2013 .

Optimum Design of Intermediate Support for Raising Fundamental Frequency of a Beam or Column under Compressive Axial Load

D. Wang, 2014 .

Optimization of support positions to minimize the maximal deflection of structures

D. Wang, D. Wang, 2004 .

Evaluation of ductile-brittle transition temperature of anisotropy material by small punch test with U-shaped notch

D. Wang, K. Guan, J. Dobrovskâ, 2018, Ubiquity Proceedings.

Stiffness and Poisson ratio in longitudinal compression of fiber yarns in meso-FE modelling of composite reinforcement forming

P. Boisse, D. Wang, E. Vidal-Sallé, 2018 .

Frequency sensitivity analysis for beams carrying lumped masses with translational and rotary inertias

D. Wang, 2012 .

The small punch creep test: some results from a numerical model

D. Wang, M. Evans, 2008 .

Sensitivity Analysis and Shape Optimization of a Hole in a Vibrating Rectangular Plate for Eigenfrequency Maximization

D. Wang, 2012 .

Optimizing the sensitivity of the small-disc creep test to damage and test conditions

M Evans, D Wang, D. Wang, 2007 .

Vibration and Sensitivity Analysis of a Beam With a Lumped Mass of Translational and Rotary Inertias

D. Wang, D. Wang, 2012 .

Optimal Design of an Intermediate Support for a Beam With Elastically Restrained Boundaries

D. Wang, 2011 .

The minimum support stiffness required to raise the fundamental natural frequency of plate structures

M. Friswell, D. Wang, 2007 .

Micromechanics and poroelasticity of hydrated cellulose networks.

D. Wang, M. Gidley, J. Stokes, 2014, Biomacromolecules.

Optimal shape design of a frame structure for minimization of maximum bending moment

D. Wang, D. Wang, 2007 .

Sensitivity analysis of structural response to position of external applied load in plate flexural condition

D. Wang, D. Wang, 2017 .

Combined shape and sizing optimization of truss structures

W. H. Zhang, Weihong Zhang, D. Wang, 2002 .

Longitudinal compression and Poisson ratio of fiber yarns in meso-scale finite element modeling of composite reinforcements

P. Boisse, D. Wang, E. Vidal-Sallé, 2018 .

Maximizing the natural frequency of a beam with an intermediate elastic support

Michael I. Friswell, D. Wang, M. Friswell, 2006 .

Plain bearing stresses due to forming and oil film pressure

Stavros Syngellakis, Philippa A.S. Reed, A. Burke-Veliz, 2009 .

Support position optimization with minimum stiffness for plate structures including support mass

M.I. Friswell, D. Wang, M. Friswell, 2021 .

Composite compression bottom flange for steel box girders, January 1986, FINAL REPORT, to Federal Highway Administration

B. T. Yen, T. Huang, D. Wang, 1986 .

Feasibility study of steel-concrete composite compression flange in steel box girders, Preliminary draft, November 1984

T. Huang, D. Wang, C. K. Chuang, 1984 .

Micromechanics and poroelasticity of hydrated cellulose networks.

D. Wang, M. Gidley, S. Brulhart, 2014, Biomacromolecules.

Study of wellbore stresses and stability based on a hollow cylinder model

P. Nawrocki, D. Wang, Z. Qi, 2012 .

Stochastic modelling of the small disc creep test

D. Wang, M. Evans, 2007 .