Libo Zhou

发表

Development of CMG Wheels for Stress Relief in Si Wafer Thinning Process

Yoshiaki Tashiro, Jun Shimizu, Libo Zhou, 2011 .

Effect of Wheel Additive On Chemo-Mechanical Grinding (CMG) of Single Crystal Si Wafer

Y. Mikami, Libo Zhou, J. Shimizu, 2010 .

Nanomechanical Properties and Nanostructure of CMG and CMP Machined Si Substrates

Libo Zhou, B. Wang, Han Huang, 2008 .

Studies on truing and dressing of diamond wheels (1st report) ― The measurement of protrusion height of abrasive grains by using a stereo pair and the influence of protrusion height on grinding performance

Libo Zhou, K. Syoji, S. Matsui, 1989 .

Effects of tantalum addition on microstructure and properties of titanium alloy fabricated by laser powder bed fusion

Libo Zhou, Wei Li, Jing Shu, 2021, Journal of Central South University.

Development of metal cutting process accompanied by a localized compressive hydrostatic stress field formation: Examination by molecular dynamics simulation

Libo Zhou, J. Shimizu, Keito Uezaki, 2014 .

Defect-free fabrication for single crystal silicon substrate by chemo-mechanical grinding

Libo Zhou, J. Shimizu, Sumio Kamiya, 2006 .

Characteristics of silicon substrates fabricated using nanogrinding and chemo-mechanical-grinding

Libo Zhou, J. Zou, Yong Wang, 2008 .

Study on polymer-bridging flocculation performance of ultrafine specular hematite ore and its high gradient magnetic separation behavior: Description of floc microstructure and flocculation mechanism

Libo Zhou, Yimin Zhu, Yuexin Han, 2021 .

Numerical simulation and experimental verification for magnetic field analysis of thread magnetic matrix in high gradient magnetic separation

Libo Zhou, Yuexin Han, Wenbo Li, 2019, Powder Technology.

Development of Single Step Grinding System for Large Scale ϕ300 Si Wafer: A Total Integrated Fixed-Abrasive Solution

Jun Shimizu, Hiroshi Eda, Libo Zhou, 2001 .

Material removal mechanism beyond plastic wave propagation rate

Jun Shimizu, Hiroshi Eda, Libo Zhou, 2003 .

Sensor Based on Micro-Manipulation : Study of Contact-control probing system

Tomohiko Ishikawa, Tatuo Kawakami, Hiroshi Eda, 2003 .

Ultrasonic vibration assisted electro-discharge machining of microholes in Nitinol

Han Huang, Libo Zhou, Hongyu Zheng, 2003 .

Performance improvement of chemo-mechanical grinding in single crystal silicon machining by the assistance of elliptical ultrasonic vibration

Zhenzhong Wang, Yaguo Li, Libo Zhou, 2011 .

Material removal mechanism in rotary in-feed grinding - Modeling and analysis -

Libo Zhou, J. Shimizu, Hirotaka Ojima, 2020 .

Effects of Ta content on phase transformation in selective laser melting processed Ti-13Nb-13Zr alloy and its correlation with elastic properties

Libo Zhou, Jian Chen, Weiying Huang, 2021 .

Texture evolution, phase transformation and mechanical properties of selective laser melted Ti-13Nb-13Zr

Libo Zhou, T. Yuan, Rui-di Li, 2018, Materials Characterization.

Influence of Y2O3 on densification, flexural strength and heat shock resistance of cordierite-based composite ceramics

Libo Zhou, Ruiheng Xiang, Cheng Hu, 2021, Ceramics International.

Secondary Cracks and Mechanical Behavior Prediction of Concrete Segments After FRP Confinement

Libo Zhou, T. Eng, Peiwei Gao, 2018, Iranian Journal of Science and Technology, Transactions of Civil Engineering.

Molecular Dynamics Simulation of Adhesion Effect on Material Removal and Tool Wear in Diamond Grinding of Silicon Wafer

Jun Shimizu, Hiroshi Eda, Libo Zhou, 2008 .

Mechanical and corrosion behavior of titanium alloys additively manufactured by selective laser melting – A comparison between nearly β titanium, α titanium and α + β titanium

Libo Zhou, J. He, T. Yuan, 2019, Optics & Laser Technology.

Development of Localized Compressive Hydrostatic Pressure-assisted Cutting Method: Cutting Experiment and Molecular Dynamics Simulation using Sliding Element

Libo Zhou, J. Shimizu, Hirotaka Ojima, 2017 .

Friction characteristics of mechanically microtextured metal surface in dry sliding

Libo Zhou, J. Shimizu, Hirotaka Ojima, 2020 .

Finite element analysis of deflection and residual stress on machined ultra-thin silicon wafers

Lei Zhou, Libo Zhou, J. Shimizu, 2011 .

Grinding and Polishing of Nanolayered Structures: Thin Film Amorphous Silicon Solar Panels

Libo Zhou, Han Huang, T. Sumitomo, 2010 .

Deformation and material removal in a nanoscale multi-layer thin film solar panel using nanoscratch

Libo Zhou, Han Huang, T. Sumitomo, 2011 .

Development of Microtextured Photocatalytic Surface by Vibration-Assisted Scratching

Libo Zhou, J. Shimizu, Hirotaka Ojima, 2014 .

Influence of Surface Micro Texture on Photocatalitic Function of Titanium Dioxide Film

Libo Zhou, J. Shimizu, Hirotaka Ojima, 2012 .

Enhancement of Photocatalytic Reaction of Titanium Dioxide Film by Surface Texturing

Libo Zhou, J. Shimizu, Hirotaka Ojima, 2010 .

Fundamental Study on Influence of Surface Topography on Photocatalytic Reaction

Libo Zhou, J. Shimizu, H. Eda, 2008 .

Evaluation of Subsurface Damage in Silicon Wafer Based on Deflection Analysis: —Thin Wafer Deformation Mechanism Revealed by Use of FEM—@@@—有限要素法を用いた数値シミュレーションによる薄いウェハの変形メカニズム解明—

Libo Zhou, J. Shimizu, Seiki Takahashi, 2017 .

Fundamental Research on Generation of Nanostructure by Means of Local Anodic Oxidation

Libo Zhou, J. Shimizu, H. Eda, 2008 .

Oxidation mechanism of a near β-Ti alloy

Libo Zhou, Cong Li, Yanjie Ren, 2022, Materials & Design.

Theoretical analysis on effects of grain size variation

Libo Zhou, J. Shimizu, Hirotaka Ojima, 2017 .

High speed grinding of silicon nitride with resin bond diamond wheels

Libo Zhou, L. Yin, Han Huang, 2003 .

Experimental and Simulation Research on Influence of Temperature on Nano-Scratching Process of Silicon Wafer

Libo Zhou, J. Shimizu, H. Eda, 2007 .

Study on Nanomachining Process of Si Wafer using an Atomic Force Microscope

Libo Zhou, J. Shimizu, H. Eda, 2007 .

Chemo-mechanical grinding by applying grain boundary cohesion fixed abrasive for monocrystal sapphire

Libo Zhou, J. Shimizu, Ke Wu, 2021, Precision Engineering.

Limit of cold deformation in a near β-Ti alloy: role of α´ phases on the failure of β phase during cold rolling

Libo Zhou, K. Zhou, Cong Li, 2022, Journal of Materials Research and Technology.

Removal of tin and extraction of indium from acid-dissolved solution of waste indium-tin targets

Libo Zhou, T. Yuan, Rui-di Li, 2014 .

Extraction of rubidium from kaolin clay waste: Process study

Libo Zhou, T. Yuan, Rui-di Li, 2015 .

Two ways of evaluating the wear property of Ti-13Nb-13Zr fabricated by selective laser melting

Libo Zhou, T. Yuan, Rui-di Li, 2019, Materials Letters.

Microstructures and mechanical property of AlMgScZrMn - A comparison between selective laser melting, spark plasma sintering and cast

Libo Zhou, T. Yuan, Rui-di Li, 2019, Materials Science and Engineering: A.

Effect of heating rate on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy produced by spark plasma sintering

Libo Zhou, T. Yuan, Rui-di Li, 2019, Materials Characterization.

Effect of carboxymethyl starch on fine-grained hematite recovery by high-intensity magnetic separation: Experimental investigation and theoretical analysis

Libo Zhou, Yimin Zhu, Yuexin Han, 2019, Powder Technology.

A new insight into the α phase precipitation in β titanium alloy

Libo Zhou, Jinshan Sun, Jian Chen, 2021, Vacuum.

Remnant tensile and creep properties of aluminized AISI 321 austenite stainless steel under prior creep–fatigue interaction

Shenmin Zhang, Libo Zhou, Jian Chen, 2022, Fatigue & Fracture of Engineering Materials & Structures.

Development of binder-free CMG abrasive pellet and finishing performance on mono-crystal sapphire

Libo Zhou, J. Shimizu, Y. Zhu, 2020 .

Effects of particle size and dispersion methods of In2O3‐SnO2 mixed powders on the sintering properties of indium tin oxide ceramics

Libo Zhou, T. Yuan, Rui-di Li, 2018 .

Micro-structure of ITO ceramics sintered at different temperatures and its effect on the properties of deposited ITO films

Libo Zhou, T. Yuan, Rui-di Li, 2018 .

Effects of element chemical states and grain orientation growth of ITO targets on photoelectric properties of the film

Libo Zhou, T. Yuan, Rui-di Li, 2017 .

Microstructure and mechanical properties of selective laser melted biomaterial Ti-13Nb-13Zr compared to hot-forging

Libo Zhou, T. Yuan, Rui-di Li, 2018 .

D21 Research on defect detection method by image processing using wavelet transform

Hirotaka Ojima, Jun Shimizu, Libo Zhou, 2012 .

Microstructure tailoring to enhance strength and ductility in pure tantalum processed by selective laser melting

Libo Zhou, Jian Chen, J. He, 2020 .

Facile synthesis of Fe-6.5wt%Si/SiO2 soft magnetic composites as an efficient soft magnetic composite material at medium and high frequencies

Libo Zhou, Z. Jiang, Z. Y. Wu, 2018 .

Effect of scanning speed on the high-temperature oxidation resistance and mechanical properties of Inconel 625 alloys fabricated by selective laser melting

Libo Zhou, Jinshan Sun, Weiying Huang, 2022, Vacuum.

Anisotropic mechanical behavior of biomedical Ti-13Nb-13Zr alloy manufactured by selective laser melting

Libo Zhou, T. Yuan, Rui-di Li, 2018, Journal of Alloys and Compounds.

Selective laser melting of pure tantalum: Densification, microstructure and mechanical behaviors

Libo Zhou, T. Yuan, Rui-di Li, 2017 .

Secondary Cracks and Mechanical Behavior Prediction of Concrete Segments After FRP Confinement

Libo Zhou, T. Eng, Peiwei Gao, 2018, Iranian Journal of Science and Technology, Transactions of Civil Engineering.

Densification, microstructure evolution and fatigue behavior of Ti-13Nb-13Zr alloy processed by selective laser melting

Libo Zhou, T. Yuan, Rui-di Li, 2019, Powder Technology.

Study of Substrate Preheating on the Microstructure and Mechanical Performance of Ti-15mo Alloy Processed by Selective Laser Melting

Libo Zhou, Jinshan Sun, Yan Niu, 2022, SSRN Electronic Journal.

Effect of scanning strategies on the microstructure and mechanical properties of Ti–15Mo alloy fabricated by selective laser melting

Libo Zhou, Wei Chen, Jinshan Sun, 2022, Vacuum.

Crystallographic orientation effect on the polishing behavior of LiTaO3 single crystal and its correlation with strain rate sensitivity

Libo Zhou, Yi Ma, T. T. Debela, 2021, Ceramics International.

Vibration-assisted dry polishing of fused silica using a fixed-abrasive polisher

Masakazu Fujimoto, Yaguo Li, Libo Zhou, 2014 .

Robotic grinding and polishing for turbine-vane overhaul

XiaoQi Chen, Han Huang, Libo Zhou, 2002 .

Polishing Using Flexible Abrasive Tools and Loose Abrasives

Libo Zhou, L. Yin, Han Huang, 2011 .

Elimination of surface scratch/texture on the surface of single crystal Si substrate in chemo-mechanical grinding (CMG) process

Jun Shimizu, Libo Zhou, Renke Kang, 2009 .

Effect of Compressive Hydrostatic Stress on Torsional Deformation of Metal: —Analysis Using Molecular Dynamics—@@@—分子動力学による解析—

Libo Zhou, J. Shimizu, Keito Uezaki, 2016 .

Molecular dynamics simulation of effect of grinding wheel stiffness on nanogrinding process

Libo Zhou, J. Shimizu, H. Eda, 2008 .

Molecular dynamics simulation of vibration-assisted cutting: influences of vibration, acceleration and velocity

Jun Shimizu, Hiroshi Eda, Libo Zhou, 2006 .

Molecular dynamics simulation of vibration-assisted cutting: influences of vibration parameters

Jun Shimizu, Libo Zhou, Hiroshi Eda, 2006, Int. J. Manuf. Technol. Manag..

Rut-Resisting Capacity of the Whole Surface Course in Continuous Upgrade under Heavy Loading

Libo Zhou, Qisen Zhang, H. Guan, 2009 .

Research on Enhancement of Photocatalytic Activities Dioxide Film Surface by Generating Microcutting ofTitanium Grooves

Libo Zhou, J. Shimizu, Hirotaka Ojima, 2014 .