G. Buckner

发表

LPV control design and experimental implementation for a magnetic bearing system

G.D. Buckner, B. Lu, H. Choi, 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

Design optimization of a shape memory alloy–actuated robotic catheter

G. Buckner, J. H. Crews, J. Crews, 2012 .

An adaptive system identification model of the biomechanical response of the human trunk during sudden loading.

Gary A Mirka, Gregory D Buckner, G. Mirka, 2006, Journal of biomechanical engineering.

Adaptive system identification applied to the biomechanical response of the human trunk during sudden loading.

Gary A Mirka, Gregory D Buckner, G. Mirka, 2005, Journal of biomechanics.

Nonlinear System Identification Applied to the Biomechanical Response of the Human Trunk during Sudden Loading

G. Mirka, G. Buckner, B. Lawrence, 2002 .

Active magnetic bearings for energy storage systems for combat vehicles

B. R. Murphy, G. Buckner, A. Palazzolo, 2001 .

Multi-Objective Design Optimization of a Shape Memory Alloy Flexural Actuator

Shiquan Wang, G. Buckner, J. H. Crews, 2019, Actuators.

Investigating thin film stresses in stacked silicon dioxide/silicon nitride structures and quantifying their effects on frequency response

A. Kingon, G. Buckner, J. Maranchi, 2007 .

A Novel Shape Memory Alloy Annuloplasty Ring for Minimally Invasive Surgery: Design, Fabrication, and Evaluation

G. Buckner, J. Osborne, D. Cormier, 2010, Annals of Biomedical Engineering.

Data-driven techniques to estimate parameters in the homogenized energy model for shape memory alloys

Gregory D. Buckner, John H. Crews, Jennifer C Hannen, 2012 .

Sensor enabled closed-loop bending control of soft beams

Bishakh Bhattacharya, Erbao Dong, Pyunghwa Kim, 2016 .

Effects of adhesion layers on the ferroelectric properties of lead zirconium titanate thin films deposited on silicon nitride coated silicon substrates

A. Kingon, G. Buckner, J. Maranchi, 2008 .

Solid Tumor Embolotherapy in Hepatic Arteries with an Anti-reflux Catheter System

G. Buckner, Zelin Xu, C. Kleinstreuer, 2015, Annals of Biomedical Engineering.

Innovation in catheter design for intra-arterial liver cancer treatments results in favorable particle-fluid dynamics

M. A. van den Bosch, G. Buckner, M. Lam, 2015, Journal of experimental & clinical cancer research : CR.

A Powered Prosthetic Ankle Designed for Task Variability – A Concept Validation

Ming Liu, G. Buckner, H. Huang, 2021, 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

Tissue-disruptive forces during median sternotomy.

Masha Kocherginsky, Valluvan Jeevanandam, Jai Raman, 2007, The heart surgery forum.

Design Optimization and Analysis of a Prescribed Vibration System

Gregory D. Buckner, Scott Ferguson, Bongani Malinga, 2016, DAC 2016.

Retraction mechanics of Finochietto-style self-retaining thoracic retractors

C. A. Pell, G. Buckner, H. C. Crenshaw, 2019, BioMedical Engineering OnLine.

Evaluation of a novel atrial retractor for exposure of the mitral valve in a porcine model.

G. Buckner, J. Osborne, G. Bolotin, 2008, The Journal of thoracic and cardiovascular surgery.

A Dynamic Heart System to Facilitate the Development of Mitral Valve Repair Techniques

Gregory D. Buckner, Richard C. Cook, Gil Bolotin, 2009, Annals of Biomedical Engineering.

Gastric artery embolization: studying the effects of catheter type and injection method on microsphere distributions within a benchtop arterial model

G. Buckner, J. Osborne, S. Jernigan, 2020, Biomedical engineering online.

Gastric Artery Embolization: Studying Effects of Catheter Type and Injection Method on Bead Distributions within a Benchtop Arterial Model

G. Buckner, J. Osborne, S. Jernigan, 2020 .

A large air gap magnetic levitator for intra-arterial positioning of a clinical microcatheter: design, fabrication, and preliminary experimental evaluation

Gregory D. Buckner, Victor M. Zaccardo, Samuel R. Miller, 2020, International Journal of Intelligent Robotics and Applications.

Innovation in catheter design for intra-arterial liver cancer treatments results in favorable particle-fluid dynamics

Shaphan R. Jernigan, M. A. van den Bosch, G. Buckner, 2015, Journal of experimental & clinical cancer research : CR.

Selective internal radiation therapy: quantifying distal penetration and distribution of resin and glass microspheres in a surrogate arterial model.

G. Buckner, J. Osborne, S. Jernigan, 2015, Journal of vascular and interventional radiology : JVIR.

Experimental Microsphere Targeting in a Representative Hepatic Artery System

Gregory D. Buckner, Clement Kleinstreuer, Andrew L. Richards, 2012, IEEE Transactions on Biomedical Engineering.

A laparoscopic knot-tying device for minimally invasive cardiac surgery.

Denis Cormier, Arun Veeramani, Bryan Laffitte, 2010, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

An offset hub active vibration control system for mitigating helicopter vibrations during power loss: Simulation and experimental demonstration

Gregory D. Buckner, Mark R. Jolly, Daniel E. Kakaley, 2018, Aerospace Science and Technology.

Intelligent Feedback Linearization for Active Vehicle Suspension Control

Gregory D. Buckner, K. T. Schuetze, Joseph H. Beno, 2001 .

INTELLIGENT ESTIMATION OF SYSTEM PARAMETERS FOR ACTIVE VEHICLE SUSPENSION CONTROL

K. T. Schuetze, G. D. Buckner, G. Buckner, 1999 .

Control and Control Allocation for Bimodal, Rotary Wing, Rolling–Flying Vehicles

G. Buckner, M. Bryant, Stefan Atay, 2021 .

Intelligent Sliding Mode Control of Cutting Force During Single-Point Turning Operations

Gregory D. Buckner, G. Buckner, 2001 .

Structural System Identification and Damage Detection using the Intelligent Parameter Varying Technique: An Experimental Study

Gregory D. Buckner, Mohammad Noori, Soheil Saadat, 2007 .

Implementing a Remote Laboratory Experience Into a Joint Engineering Degree Program: Aerodynamic Levitation of a Beach Ball

Gregory D. Buckner, Shaphan R. Jernigan, Yusef Fahmy, 2009, IEEE Transactions on Education.

ℒ1 adaptive control of a shape memory alloy actuated flexible beam

Gregory D. Buckner, Bongani Malinga, G. Buckner, 2015 .

Hysteretic recurrent neural networks: a tool for modeling hysteretic materials and systems

Gregory D. Buckner, John H. Crews, Arun S. Veeramani, 2009 .

Modeling the dynamic behavior of a shape memory alloy actuated catheter

Gregory D. Buckner, Arun S. Veeramani, Stephen B. Owen, 2008 .

Finite element modeling of the left atrium to facilitate the design of an endoscopic atrial retractor.

G D Buckner, S R Jernigan, J W Eischen, 2007, Journal of biomechanical engineering.

Non-contacting measurement of torque and axial translation in high-speed rotating shafts

Gregory D. Buckner, Daniel E. Kakaley, Russell E. Altieri, 2020 .

Automated knot tying for fixation in minimally invasive, robot-assisted cardiac surgery.

J F Kuniholm, G D Buckner, W Nifong, 2005, Journal of biomechanical engineering.

Actuation and Control Strategies for Miniature Robotic Surgical Systems

Gregory D. Buckner, Jason Michael Stevens, G. Buckner, 2005 .

Defect identification in GRID-LOCK® joints

Gregory D. Buckner, Pradeep Pandurangan, G. Buckner, 2007 .

Indirect Intelligent Sliding Mode Control of Antagonistic Shape Memory Alloy Actuators Using Hysteretic Recurrent Neural Networks

Gregory D. Buckner, Jennifer Hannen Wiest, G. Buckner, 2014, IEEE Transactions on Control Systems Technology.

Multi-objective control optimization for semi-active vehicle suspensions

Gregory D. Buckner, John H. Crews, Michael G. Mattson, 2011 .

Evaluation of a shape memory alloy reinforced annuloplasty band for minimally invasive mitral valve repair.

G. Buckner, J. Osborne, D. Cormier, 2009, The Annals of thoracic surgery.

Vibration Analysis for Damage Detection in Metal-to-Metal Adhesive Joints

G. Buckner, P. Pandurangan, 2006 .

Estimating Model Uncertainty using Confidence Interval Networks: Applications to Robust Control

Nathan S. Gibson, Heeju Choi, Gregory D. Buckner, 2006 .

Energetic analysis and optimization of a bi-modal rolling-flying vehicle

G. Buckner, M. Bryant, Tyler Jenkins, 2020, International Journal of Intelligent Robotics and Applications.

A novel instrumented retractor to monitor tissue-disruptive forces during lateral thoracotomy.

Masha Kocherginsky, Valluvan Jeevanandam, Jai Raman, 2007, The Journal of thoracic and cardiovascular surgery.

Modeling piezoelectric actuators with Hysteretic Recurrent Neural Networks

Gregory D. Buckner, Alexander York, J. P. Lien, 2010 .

Design and testing of a centrifugal fluidic device for populating microarrays of spheroid cancer cell cultures

Samuel R. Miller, Shaphan R. Jernigan, G. Buckner, 2020, Journal of biological engineering.

Sensor Fusion with Deep Learning for Autonomous Classification and Management of Aquatic Invasive Plant Species

Shaphan R. Jernigan, G. Buckner, A. Howell, 2022, Robotics.

Active magnetic dampers for controlling lateral rotor vibration in high-speed rotating shafts

Victor M. Zaccardo, G. Buckner, 2021, Mechanical Systems and Signal Processing.

Design optimization of a prescribed vibration system using conjoint value analysis

Gregory D. Buckner, Bongani Malinga, G. Buckner, 2016 .

Indirect intelligent sliding mode control of a shape memory alloy actuated flexible beam using hysteretic recurrent neural networks

Jennifer C Hannen, John H Crews, Gregory D Buckner, 2012, Smart materials & structures.

The Cost-Sorted Distance Method for Identifying Minima Within Firefly Optimization Results: Application to Engineering Design

Scott Ferguson, Gregory D. Buckner, Christopher M. Elliott, 2021, J. Comput. Inf. Sci. Eng..

Neural robust control of a high-speed flexible rotor supported on active magnetic bearings

Heeju Choi, G. Buckner, N. Gibson, 2006, 2006 American Control Conference.

Confidence interval networks for bounding model uncertainty: experimental evaluations on an active magnetic bearing system

N.S. Gibson, G.D. Buckner, H. Choi, 2005, Proceedings of the 2005 IEEE Midnight-Summer Workshop on Soft Computing in Industrial Applications, 2005. SMCia/05..

Multi-Objective Design Optimization of a Variable Geometry Spray Fuel Injector

Gregory D. Buckner, Scott Ferguson, Tiegang Fang, 2014 .

Controlling the torque-speed characteristics of a polyphase induction motor using a switched rotor ballast network

W. F. Weldon, G. D. Buckner, M. T. Caprio, 2001, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148).

Path optimization and control of a shape memory alloy actuated catheter for endocardial radiofrequency ablation

Gregory D. Buckner, Jennifer Hannen Wiest, G. Buckner, 2015, Robotics Auton. Syst..

Real-time estimation of helicopter blade kinematics using integrated linear displacement sensors

Gregory D. Buckner, Mark R. Jolly, C. Jefferson Allred, 2015 .

Structural health monitoring and damage detection using an intelligent parameter varying (IPV) technique

Gregory D. Buckner, Yoshiyuki Suzuki, Mohammad Noori, 2004 .

Dynamic Modeling for Bi-Modal, Rotary Wing, Rolling-Flying Vehicles

Gregory D. Buckner, Stefan Atay, Matthew Bryant, 2020 .

A learning method for multivariable PID control synthesis based on estimated plant Jacobian

Gregory D. Buckner, Byeong-Mook Chung, Yoon-Kyu Lim, 2009 .

Autonomous Robotics for Identification and Management of Invasive Aquatic Plant Species

Scott Ferguson, Gregory D. Buckner, Shaphan R. Jernigan, 2019, Applied Sciences.

Intelligent control of a micromanipulator actuated with shape memory alloy tendons

Gregory D. Buckner, Jason Michael Stevens, G. Buckner, 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.