Guoyu Yu

发表

More steps towards process automation for optical fabrication

Anthony Beaucamp, Sanja Petrovic, Hongyu Li, 2017, Precision Optics Manufacturing.

Edge control in CNC polishing, paper 2: simulation and validation of tool influence functions on edges.

Guoyu Yu, A. Beaucamp, Hongyu Li, 2013, Optics express.

Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surface.

Guoyu Yu, A. Beaucamp, Hongyu Li, 2012, Optics express.

Surface Texture Evolution of Fused Silica in a Combined Process of Atmospheric Pressure Plasma Processing and Bonnet Polishing

Guoyu Yu, Hongyu Li, David Walker, 2019, Coatings.

Modeling and validation of polishing tool influence functions for manufacturing segments for an extremely large telescope.

D. Walker, Guoyu Yu, Hongyu Li, 2013, Applied optics.

Simulation and experimental study on form-preserving capability of bonnet polishing for complex freeform surfaces

D. Walker, Guoyu Yu, Hongyu Li, 2019, Precision Engineering.

Combined processing chain for freeform optics based on atmospheric pressure plasma processing and bonnet polishing.

Guoyu Yu, Hongyu Li, David Walker, 2019, Optics express.

Research on edge-control methods in CNC polishing

David D. Walker, Anthony Beaucamp, Guoyu Yu, 2017, Journal of the European Optical Society. Rapid publications.

Photolithographically manufactured acrylate polymer multimode optical waveguide loss design rules

David R. Selviah, Guoyu Yu, Kai Wang, 2008, 2008 2nd Electronics System-Integration Technology Conference.

Analysis of tool-mass-acceleration effects onto sub-aperture computer controlled polishing (CCP)

Guoyu Yu, David D. Walker, Oliver Faehnle, 2016, Precision Optics Manufacturing.

Fully automating fine-optics manufacture - why so tough, and what are we doing?

S. Petrovic, D. Walker, Guoyu Yu, 2019, Journal of the European Optical Society-Rapid Publications.

High Sensitivity SERS Substrate of a Few Nanometers Single-Layer Silver Thickness Fabricated by DC Magnetron Sputtering Technology

Guoyu Yu, C. Tu, Ting-Yu Liu, 2022, Nanomaterials.

Modelling and measurement of polishing tool influence functions for edge control

David Walker, Guoyu Yu, Hongyu Li, 2011 .

Title advances in optical fabrication for astronomy

Yoshiharu Namba, Guoyu Yu, Lunzhe Wu, 2018, Monthly Notices of the Royal Astronomical Society.

The role of robotics in computer controlled polishing of large and small optics

Hongyu Li, Guoyu Yu, Chunlian Lu, 2015, SPIE Optical Engineering + Applications.

Mid-spatial frequency removal on aluminum free-form mirror.

Peng Zhang, Guoyu Yu, David D. Walker, 2019, Optics express.

Rigid aspheric smoothing tool for mid-spatial frequency errors on aspheric or freeform optical surfaces

D. Walker, Guoyu Yu, Hongyu Li, 2019, Journal of the European Optical Society-Rapid Publications.

Insight into aspheric misfit with hard tools: mapping the island of low mid-spatial frequencies

David D. Walker, Wang Zhang, Guoyu Yu, 2017 .

Bridging the Divide Between Iterative Optical Polishing and Automation

Guoyu Yu, Hongyu Li, David Walker, 2023, Nanomanufacturing and Metrology.

Study of the normal force and velocity influence on the fused silica scratching mechanisms with a-alumina grit at atomic scale via Reaxff reactive molecular dynamic simulations

Guoyu Yu, Hongyu Li, Yasemin Akar, 2024, International Journal of Abrasive Technology.

Advanced Abrasive Processes for Manufacturing Prototype Mirror Segments for the World’s Largest Telescope

David D. Walker, J. Mitchell, Guoyu Yu, 2014 .