P. Liacouras

发表

Medical 3D Printing for the Radiologist.

F. Rybicki, D. Mitsouras, P. Liacouras, 2015, Radiographics : a review publication of the Radiological Society of North America, Inc.

Overcoming Cross-Gender Differences and Challenges in Le Fort–Based, Craniomaxillofacial Transplantation With Enhanced Computer-Assisted Technology

Ryan J. Murphy, E. Fishman, P. Liacouras, 2013, Annals of plastic surgery.

Creating patient-specific anatomical models for 3D printing and AR/VR: a supplement for the 2018 Radiological Society of North America (RSNA) hands-on course

Todd Pietila, Nicole Wake, Maureen Schickel, 2019, 3D Printing in Medicine.

Digital capture, design, and manufacturing of a facial prosthesis: Clinical report on a pediatric patient.

Peter Liacouras, Gerald T Grant, Cynthia Aita-Holmes, 2015, The Journal of prosthetic dentistry.

Suturable mesh better resists early laparotomy failure in a cyclic ball-burst model

C. Dearth, P. Liacouras, J. Souza, 2020, Hernia.

Physical Simulation Models in Oral and Maxillofacial Surgery: A New Concept in 3-Dimensional Modeling for Removal of Impacted Third Molars.

Christopher E. Crecelius, P. Liacouras, P. Cervenka, 2019, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

Clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: adult cardiac conditions

Rami M. Shorti, F. Rybicki, P. Liacouras, 2020, 3D Printing in Medicine.

Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios

Yoshimi Anzai, Philipp Brantner, Benjamin Johnson, 2018, 3D Printing in Medicine.

Custom Anatomical 3D Spacer for Temporomandibular Joint Resection and Reconstruction

P. Liacouras, G. Grant, John M. Green, 2016, Craniomaxillofacial trauma & reconstruction.

Volumetric changes in edentulous alveolar ridge sites utilizing guided bone regeneration and a custom titanium ridge augmentation matrix (CTRAM): a case series study

P. Liacouras, J. Wessel, Craig E. Hofferber, 2016, International journal of implant dentistry.

Three‐dimensional printing of MRI‐visible phantoms and MR image‐guided therapy simulation

Stephan E Maier, Ciprian N Ionita, Peter Liacouras, 2017, Magnetic resonance in medicine.

Custom Titanium Ridge Augmentation Matrix (CTRAM): A Case Report.

P. Liacouras, G. Grant, Christopher A Connors, 2016, The International journal of periodontics & restorative dentistry.

The residual STL volume as a metric to evaluate accuracy and reproducibility of anatomic models for 3D printing: application in the validation of 3D-printable models of maxillofacial bone from reduced radiation dose CT images

Kurt Schultz, Shadpour Demehri, Frank J. Rybicki, 2015, 3D Printing in Medicine.

CT-Based 3D Printing of the Glenoid Prior to Shoulder Arthroplasty: Bony Morphology and Model Evaluation

Eliot L Siegel, Kenneth C. Wang, Peter C Liacouras, 2019, Journal of Digital Imaging.

Effects of Medializing Calcaneal Osteotomy on Achilles Tendon Lengthening and Plantar Foot Pressures

P. Liacouras, R. Adelaar, J. Owen, 2003, Foot & ankle international.

The Effects of a Medializing Calcaneal Osteotomy With and Without Superior Translation On Achilles Tendon Elongation and Plantar Foot Pressures

P. Liacouras, R. Adelaar, J. Owen, 2005, Foot & ankle international.

3D-Printed Patient-Specific Models for CT- and MRI-Guided Procedure Planning

D. Mitsouras, P. Liacouras, E. George, 2017, American Journal of Neuroradiology.

Optimizing Hybrid Occlusion in Face-Jaw-Teeth Transplantation: A Preliminary Assessment of Real-Time Cephalometry as Part of the Computer-Assisted Planning and Execution Workstation for Craniomaxillofacial Surgery

Mehran Armand, Yoshito Otake, Ehsan Basafa, 2015, Plastic and reconstructive surgery.

Using 3D models in orthopedic oncology: presenting personalized advantages in surgical planning and intraoperative outcomes

P. Liacouras, T. Punyaratabandhu, Sutipat Pairojboriboon, 2018, 3D Printing in Medicine.

Preliminary Development of a Workstation for Craniomaxillofacial Surgical Procedures: Introducing a Computer-Assisted Planning and Execution System

Ryan J. Murphy, Mehran Armand, Yoshito Otake, 2014, The Journal of craniofacial surgery.

Establishing Cephalometric Landmarks for the Translational Study of Le Fort–Based Facial Transplantation in Swine: Enhanced Applications Using Computer-Assisted Surgery and Custom Cutting Guides

Ryan J. Murphy, Mehran Armand, Elliot K Fishman, 2014, Plastic and reconstructive surgery.

Restoration of the Donor Face After Facial Allotransplantation: Digital Manufacturing Techniques

Ryan J. Murphy, Mehran Armand, Peter Liacouras, 2014, Annals of plastic surgery.

Digital image capture and rapid prototyping of the maxillofacial defect.

Peter Liacouras, Gerald T Grant, Jennifer V Sabol, 2011, Journal of prosthodontics : official journal of the American College of Prosthodontists.

Complete‐arch accuracy of intraoral scanners

Joshua C Treesh, Peter C Liacouras, Robert M Taft, 2018, The Journal of prosthetic dentistry.

Time and Accuracy of the CEREC Omnicam Using Two Different Software Programs.

Daniel O Ellert, P. Liacouras, Anton Petrich, 2021, Journal of prosthodontics : official journal of the American College of Prosthodontists.

Effect of pigmentation on the mechanical and polymerization characteristics of bone cement.

P. Liacouras, J. Owen, J. Wayne, 2006, The Journal of arthroplasty.

Personalized Surgical Instruments

Peter Liacouras, Shayne Kondor, Christian Macedonia, 2013 .

Computational modeling to predict mechanical function of joints: application to the lower leg with simulation of two cadaver studies.

Peter C Liacouras, Jennifer S Wayne, P. Liacouras, 2007, Journal of biomechanical engineering.

Measuring and Establishing the Accuracy and Reproducibility of 3D Printed Medical Models.

Dimitrios Mitsouras, Peter Liacouras, Frank J Rybicki, 2017, Radiographics : a review publication of the Radiological Society of North America, Inc.

Vascular Emergency Surgery: Simulated Exercises for Limb Salvage (VESSELS)—development of a simulation model and curriculum for the military general surgeon

P. Liacouras, Holly S. Meyer, C. Hickey, 2023, Global Surgical Education - Journal of the Association for Surgical Education.

Customized 3D-Printed Prosthetic Devices for Wounded Warriors.

Mark D. Beachler, C. Dearth, P. Liacouras, 2019, American Journal of Physical Medicine & Rehabilitation.

Using computed tomography and 3D printing to construct custom prosthetics attachments and devices

Vincent B. Ho, Peter C. Liacouras, Divya Sahajwalla, 2017, 3D Printing in Medicine.

Fiber Bragg Gratings Embedded in 3D-Printed Scaffolds

P. Liacouras, G. Grant, Z. Ahmed, 2015, 1508.01156.

Computer-assisted, Le Fort-based, face–jaw–teeth transplantation: a pilot study on system feasiblity and translational assessment

Ryan J. Murphy, Mehran Armand, Chad R. Gordon, 2015, International Journal of Computer Assisted Radiology and Surgery.

Establishing 3D Printing at the Point of Care: Basic Principles and Tools for Success.

P. Liacouras, J. Coburn, Beth Ripley, 2022, Radiographics : a review publication of the Radiological Society of North America, Inc.

3D printer generated thorax phantom with mobile tumor for radiation dosimetry.

Charles B. Simone, Andrew Thomas, Liyong Lin, 2015, The Review of scientific instruments.

Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report.

Peter Liacouras, Gerald T Grant, Jonathan Garnes, 2011, The Journal of prosthetic dentistry.

Early-Onset Dementia in War Veterans: Brain Polypathology and Clinicopathologic Complexity

Sidney R. Hinds, B. Fischl, D. Perl, 2019, Journal of neuropathology and experimental neurology.

On Demand Additive Manufacturing of a Basic Surgical Kit

Vipin K. Rastogi, Peter Liacouras, Shayne Kondor, 2013 .

A Craniomaxillofacial Surgical Assistance Workstation for Enhanced Single-Stage Reconstruction Using Patient-Specific Implants.

Kevin C. Wolfe, P. Liacouras, G. Grant, 2016, The Journal of craniofacial surgery.

Retentive Forces of Removable Partial Denture Clasp Assemblies Made From Polyaryletherketone and Cobalt-Chromium: A Comparative Study.

Daniel O Ellert, P. Liacouras, Anton Petrich, 2021, Journal of prosthodontics : official journal of the American College of Prosthodontists.

3D Printing Technologies

Dimitrios Mitsouras, Peter Liacouras, P. Liacouras, 2022 .

Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios

Kenneth C. Wang, Colin M. Wilson, Katherine H. Weimer, 2018, 3D Printing in Medicine.

Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report.

P. Liacouras, G. Grant, Anton Petrich, 2011, The Journal of prosthetic dentistry.

Using 3D Printing (Additive Manufacturing) to Produce Low-Cost Simulation Models for Medical Training.

Peter Liacouras, John P Lichtenberger, Peter S Tatum, 2018, Military medicine.