D. Lecomte

发表

Method for Thermal Design of Paddle Dryers: Application to Municipal Sewage Sludge

P. Arlabosse, S. Chavez, D. Lecomte, 2004 .

Study of evaporative drying of treated silica gels

D. Lecomte, P. Achard, A. Bisson, 2004 .

Determination of porosity change from shrinkage curves during drying of food material

D. Lecomte, J. Madiouli, J. Sghaier, 2012 .

A Method for Determination of Porosity Change from Shrinkage Curves of Deformable Materials

S. Chavez, D. Lecomte, J. Madiouli, 2007 .

Monitoring of pathogenic microorganisms contamination during heat drying process of sewage sludge

D. Lecomte, B. Ladevie, C. Sablayrolles, 2009 .

Laboratory-scale drying with coupled tga-dsc

D. Lecomte, J. Ferrasse, J. Puaux, 1998 .

Emissions of polycyclic aromatic hydrocarbon particulates from combustion of different fuels

D. Lecomte, M. Montréjaud-Vignoles, C. Sablayrolles, 2012 .

Application of an electrokinetic technique to the reclamation of fluoride polluted soils: laboratory and pilot scale experiments

D. Lecomte, S. Tellier, M. Astruc, 1998 .

Preparation of Adsorbents from Sewage Sludge by Steam Activation for Industrial Emission Treatment

D. Lecomte, C. Faur, P. Cloirec, 2006 .

A glass transition temperature approach for the prediction of the surface stickiness of a drying droplet during spray drying

D. Lecomte, B. Adhikari, T. Howes, 2005 .

Drying of Silica Gels to Obtain Aerogels:Phenomenology and Basic Techniques

D. Lecomte, P. Achard, A. Bisson, 2003 .

Heat and Mass Transfer During Fry-Drying of Sewage Sludge

P. Arlabosse, D. Lecomte, V. Rudolph, 2006 .

Determination of porosity from shrinkage curves during sintering of granular materials

D. Lecomte, J. Madiouli, J. Sghaier, 2018 .

Heat and Mass Transfer in Fry Drying of Wood

D. Lecomte, J. Méot, D. Grenier, 2007 .

Method for the Design of a Contact Dryer-Application to Sludge Treatment in Thin Film Boiling

P. Arlabosse, D. Lecomte, O. Fudym, 2004 .

Heat diffusion at the boundary of stratified media. Homogenized temperature field and thermal constriction

D. Lecomte, J. Batsale, O. Fudym, 2004 .

HEAT FLUX ESTIMATION IN THIN-LAYER DRYING

D. Lecomte, O. Fudym, B. Ladevie, 1999 .

Simultaneous heat-flow differential calorimetry and thermogravimetry for fast determination of sorption isotherms and heat of sorption in environmental or food engineering

D. Lecomte, J. Ferrasse, 2004 .

Non-contact Measurement of the Shrinkage and Calculation of Porosity During the Drying of Banana

Jean-José Orteu, Didier Lecomte, Habib Sammouda, 2009 .

Comparison Between Static and Dynamic Methods for Sorption Isotherm Measurements

P. Arlabosse, S. Chavez, D. Lecomte, 2003 .

Effective thermal conductivity of divided silica xerogel beds

D. Lecomte, P. Achard, A. Bisson, 2004 .

Put Paper Number Here HEAT FLUX ESTIMATION IN THIN-LAYER DRYING

D. Lecomte, O. Fudym, B. Ladevie, 1999 .

Immersion frying for the thermal drying of sewage sludge: an economic assessment.

Carlos Peregrina, Didier Lecomte, Victor Rudolph, 2008, Journal of environmental management.

Efficient sludge thermal processing: from drying to thermal valorisation

Didier Lecomte, Angélique Léonard, Michel Crine, 2012 .

HEAT, MOMENTUM, AND MASS TRANSFER MEASUREMENTS IN INDIRECT AGITATED SLUDGE DRYER

P. Arlabosse, D. Lecomte, J. Ferrasse, 2002 .

Separation efficiency and energy consumption of oil expression using a screw-press: the case of Jatropha curcas L. seeds.

D. Lecomte, J. Blin, A. Chapuis, 2014 .

Scrap tyre pyrolysis: Are the effluents valuable products?

Didier Lecomte, Y. Soudais, D. Lecomte, 1997 .

Life Cycle Assessment (LCA) Applied to the Design of an Innovative Drying Process for Sewage Sludge

Didier Lecomte, Victor Rudolph, Patricia Arlabosse, 2006 .

Estimation of concentration-dependent diffusion coefficient in drying process from the space-averaged concentration versus time with experimental data

D. Lecomte, B. Adhikari, T. Loulou, 2006 .

Drying Kinetics of a Porous Spherical Particle and the Inversion Temperature

Didier Lecomte, Ali Belghith, Jalila Sghaier, 2008 .

Design method for sizing a latent heat store/heat exchanger in a thermal system

D. Mayer, D. Lecomte, D. Lecomte, 1985 .

Special Issue—1st International Conference on Engineering for Waste Treatment: Beneficial Use of Waste and by-Products

Didier Lecomte, Ange Nzihou, D. Lecomte, 2006 .

A suitable approximate solution of Neumann's problem

D. Lecomte, J. Batsale, 1991 .

Scrap tire pyrolysis: experiment and modelling

Y. Soudais, D. Lecomte, A. Napoli, 2010 .