I. Daniel

发表

Experimentation and modeling of composite materials

I. Daniel, 1999 .

Strain-rate-dependent failure criteria for composites

I. Daniel, B. T. Werner, J. Fenner, 2011 .

Speckle-shearing interferometric technique: a full-field strain gauge.

Isaac M Daniel, Y. Y. Hung, R. E. Rowlands, 1975, Applied optics.

Full-field optical strain measurement having postrecording sensitivity and direction selectivity

Isaac M Daniel, Y. Y. Hung, Robert E. Rowlands, 1978 .

Pressure measurement technique in nano- and micro-channels using atomic force microscopy

I. Daniel, S. K. Kim, 2006 .

Mechanical and thermal behavior of clay/epoxy nanocomposites

I. Daniel, A. Yasmin, J. J. Luo, 2006 .

Major accomplishments in composite materials and sandwich structures : an anthology of ONR sponsored research

E. Gdoutos, I. Daniel, Y. Rajapakse, 2009 .

Processing of expanded graphite reinforced polymer nanocomposites

I. Daniel, A. Yasmin, J. Luo, 2006 .

Mechanical enhancement of carbon fiber/epoxy composites by graphite nanoplatelet reinforcement

I. Daniel, J. Cho, J. Chen, 2007 .

Failure of cellular foams under multiaxial loading

E. Gdoutos, I. Daniel, K. A. Wang, 2002 .

Multiaxial Characterization and Modeling of a PVC Cellular Foam

Emmanuel E. Gdoutos, Isaac M. Daniel, E. Gdoutos, 2001 .

Determination of Chemical Cure Shrinkage in Composite Laminates

Isaac M Daniel, D. Karalekas, I. Daniel, 1990 .

Thermoviscoelastic Analysis of Residual Stresses and Warpage in Composite Laminates

Isaac M Daniel, I. Daniel, J. Gotro, 1992 .

Strain analysis of composites by moiré methods

Isaac M Daniel, D. Post, R. E. Rowlands, 1973 .

Quantitative porosity characterization of composite materials by means of ultrasonic attenuation measurements

Isaac M Daniel, Shi-Chang Wooh, I. Daniel, 1992 .

Composite Materials: Testing and Design

Isaac M Daniel, I. Daniel, 1982 .

A New Compression Test Method for Thick Composites

H. Hsiao, I. Daniel, S. Wooh, 1995 .

Mechanical characterization of graphite/epoxy nanocomposites by multi-scale analysis

Isaac M Daniel, I. Daniel, J. J. Luo, 2007 .

Characterization and modeling of mechanical behavior of polymer/clay nanocomposites

Isaac M. Daniel, I. Daniel, J. Luo, 2003 .

Fatigue characterization of tire rubber

E. Gdoutos, I. Daniel, P. Schubel, 2004 .

Quasi-static properties of a photoviscoelastic material

I. Daniel, 1965 .

EXPERIMENTAL MECHANICS OF COMPOSITE MATERIALS.

I. Daniel, 1983 .

ANALYSIS OF TUBULAR SPECIMEN FOR BIAXIAL TESTING OF COMPOSITE LAMINATES

I. Daniel, 1980 .

Interlaminar/interfiber failure of unidirectional glass fiber reinforced composites used for wind turbine blades

M. K. Leong, E. Lund, I. Daniel, 2013 .

Composite sandwich beams under low-velocity impact

I. Daniel, J. L. Abot, J. Abot, 2001 .

Laser Ultrasonic enabled “Smart” Mold for composite parts manufacturing

S. Krishnaswamy, J. Achenbach, I. Daniel, 2001 .

Analysis of Acoustic Emission Output from Propagating Fatigue Crack

Isaac M Daniel, C. G. Sifniotopoulos, I. Daniel, 1998 .

Progressive Transverse Cracking of Crossply Composite Laminates

Isaac M Daniel, J. W. Lee, J. W. Lee, 1990 .

Progressive Failure Analysis of Multi-Directional Composite Laminates Based on the Strain-Rate-Dependent Northwestern Failure Theory

I. Daniel, B. T. Werner, J. Schaefer, 2018 .

Statistical damage analysis of transverse cracking in high temperature composite laminates

I. Daniel, Zuo-yu Sun, J. J. Luo, 2003 .

A novel statistical model for predicting matrix cracking in high temperature polymer composite laminates

I. Daniel, Zuo-yu Sun, J. Luo, 2003 .

Statistical characterization of fatigue damage in high temperature composite laminates

I. Daniel, Zuo-yu Sun, J. J. Luo, 2002 .

Real-time ultrasonic and acoustic emission monitoring of damage in graphite/epoxy laminates

I. Daniel, H. Chun, S. Wooh, 1995 .

Determination of interfacial properties from observations of progressive fiber debonding and pullout

I. Daniel, R. Cordes, 1995 .

Acoustic Emission Monitoring of Fatigue Damage in Metals

C. G. Sifniotopoulos, I. M. Daniel, I. Daniel, 1998 .

Failure mechanisms in thick composites under compressive loading

Isaac M Daniel, Hao-Ming Hsiao, H. Hsiao, 1996 .

Processing and compressive behavior of thick composites

I. Daniel, J. Vittoser, 1993 .

Determination of in-plane and out-of-plane shear moduli of composite materials

I. Daniel, C. Tsai, 1990 .

Through-Thickness Mechanical Characterization of Woven Fabric Composites

I. Daniel, J. L. Abot, J. Abot, 2004 .

A SHORT BIBLIOGRAPHY OF RECENT BRITISH WORK IN PHOTOELASTICITY

W. F. Riley, J. Dally, I. Daniel, 1963 .

Characterization of Constitutive Behavior of Satin-Weave Fabric Composite

I. Daniel, A. J. Jacobsen, J. J. Luo, 2004 .

MEASUREMENT OF LAMINATION RESIDUAL STRAINS IN GRAPHITE FIBER LAMINATES.

I. Daniel, T. Liber, 1976 .

Effects of material and stacking sequence on behavior of composite plates with holes

I. Daniel, R. Rowlands, J. Whiteside, 1974 .

Strain and failure analysis of graphite/epoxy plates with cracks

I. Daniel, 1978 .

Reinforcement of carbon/epoxy composites with multi-wall carbon nanotubes and dispersion enhancing block copolymers

I. Daniel, J. Cho, Jeong-min Cho, 2008 .

Fabrication, Testing and Analysis of Composite Sandwich Structures

I. Daniel, R. A. Abot, 1998, Mechanical Behavior of Advanced Materials.

In situ micro X-ray absorption near edge structure study of microbiologically reduced selenite (SeO32−) ☆

A. Simionovici, I. Daniel, P. Oger, 2004 .

Deformation and Failure of Boron-Epoxy Plate with Circular Hole

I. Daniel, R. Rowlands, J. Whiteside, 1973 .

Geometric and Loading Effects on Strength of Composite Plates with Cutouts

I. Daniel, R. Rowlands, J. Whiteside, 1974 .

Rate effects on delamiantion fracture toughness of a toughened graphite/epoxy

I. Daniel, A. Aliyu, I. Shareef, 1987 .

Dynamic properties of a photoviscoelastic material

I. Daniel, 1966 .

Gas Flow Method for Detecting Local Preform Defects by Inverse Estimation of Space-Varying Permeability

I. Daniel, S. K. Kim, J. Opperer, 2003 .

Analysis of Fracture Probabilities in Nonuniformly Stressed Brittle Materials

Isaac M Daniel, N. A. Weil, I. Daniel, 1964 .

Is there a thickness effect on compressive strength of unnotched composite laminates?

Isaac M Daniel, Hao-Ming Hsiao, H. Hsiao, 1999 .

Fatigue and Fracture Behavior of a Steel Cord/Rubber Composite

Isaac M Daniel, Shiguo Rao, I. Daniel, 2001 .

Damage development and property degradation in composite materials

J. W. Lee, I. Daniel, G. Yaniv, 1988 .

Constitutive Modeling of Polymeric Matrix under Multi-Axial Static and Dynamic Loading

Isaac M Daniel, Brian T. Werner, I. Daniel, 2013, ICCM 2013.

Failure of Composite Materials

Isaac M Daniel, I. Daniel, 2007 .

Mechanical and failure characterization of textile composites

I. Daniel, J. Luo, P. Schubel, 2007 .

Through-thickness behavior of thick unidirectional composites

I. Daniel, J. Luo, P. Schubel, 2007 .

5206 - THREE-DIMENSIONAL CHARACTERIZATION OF CONSTITUTIVE BEHAVIOR AND FAILURE OF TEXTILE COMPOSITES

I. Daniel, G. Gray, M. Zocher, 2005 .

Interfiber/interlaminar failure of composites under multi-axial states of stress

Isaac M Daniel, Brian T. Werner, I. Daniel, 2009 .

Mechanical and Failure Behavior of Composite Materials under Static and Dynamic Loading

I. Daniel, B. T. Werner, J. Fenner, 2009 .

Holographically determined isopachics and isochromatics in the neighborhood of a crack in a glass composite

T. Dudderar, I. Daniel, R. Rowlands, 1980 .

The Embedded Strain Gage Technique for Testing Boron/Epoxy Composites

I. Daniel, T. Liber, J. L. Mullineaux, 1972 .

Determination of Strain Concentration in Composites by Moiré Techniques

I. Daniel, R. Rowlands, I. Daniel, 1971 .

A multiple-pulse ruby-laser system for dynamic photomechanics: Applications to transmitted- and scattered-light photoelasticity

Isaac M Daniel, R. E. Rowlands, C. E. Taylor, 1969 .

Wave motion in anisotropic media by dynamic photomechanics

I. Daniel, R. Rowlands, R. Prabhakaran, 1974 .

Characterization of local preform defects in resin transfer molding by the gas flow method and statistical analysis

Isaac M Daniel, I. Daniel, S. K. Kim, 2004 .

Detection of Local Preform Defects by Gas Flow Method and Statistical Analysis

I. Daniel, S. K. Kim, J. Opperer, 2003 .

Determination of in‐plane permeability of fiber preforms by the gas flow method using pressure measurements

I. Daniel, S. K. Kim, J. Opperer, 2003 .

Microplane model for stiff foams and finite element analysis of sandwich failure by core indentation

Isaac M Daniel, Zdeněk P. Bažant, Michele Brocca, 2001 .

TESTING AND ANALYSIS OF COMPOSITE SANDWICH BEAMS

I. Daniel, J. L. Abot, K. A. Wang, 2022 .

Elastic properties of composites with fiber waviness

Isaac M Daniel, Hao-Ming Hsiao, H. Hsiao, 1996 .

Nonlinear behavior of thick composites with uniform fiber waviness

I. Daniel, H. Chun, Jai-Yoon Shin, 2000 .

Nonlinear behaviors of thick composite materials with fiber waviness

I. Daniel, H. Chun, Jai-Yoon Shin, 1999 .

EFFECTS OF STRAIN RATE AND FIBER WAVINESS ON THE COMPRESSIVE BEHAVIOR OF COMPOSITE LAMINATES

H. Hsiao, I. Daniel, 2022 .

Failure Mechanisms in Fiber-Reinforced Composites

Isaac M Daniel, I. Daniel, 1978 .

Low velocity impact behavior of composite sandwich panels

Isaac M Daniel, I. Daniel, J. Luo, 2005 .

Response and Damage Tolerance of Composite Sandwich Structures under Low Velocity Impact

I. Daniel, J. L. Abot, J. Luo, 2012 .

Impact Response and Damage Tolerance of Composite Sandwich Structures

I. Daniel, 2009 .

Indentation failure in composite sandwich structures

E. Gdoutos, I. Daniel, K. A. Wang, 2002 .

Strain-Rate-Dependent Failure of a Toughened Matrix Composite

Isaac M Daniel, Brian T. Werner, Joseph D. Schaefer, 2014 .

Experimental Mechanics of Fiber Reinforced Composite Materials

Isaac M Daniel, I. Daniel, J. Whitney, 1982 .

Characterization of Metal Matrix Composites

I. Daniel, H. Chun, D. Karalekas, 1994 .

Experimental methods for identifying failure mechanisms

I. Daniel, 1983 .

Three-dimensional characterization of textile composites

Isaac M Daniel, I. Daniel, J. Luo, 2008 .

Scaling of Strength of Metal-Composite Joints—Part I: Experimental Investigation

Isaac M Daniel, Zdeněk P. Bažant, Ferhun C. Caner, 2010 .

Size effect on flexural strength of fiber-composite laminates

Z. Bažant, I. Daniel, D. Novák, 2004 .

Stress and failure analysis of a glass-epoxy composite plate with a circular hole

Isaac M Daniel, R. E. Rowlands, I. Daniel, 1973 .

Modeling of fatigue damage in a polymer matrix composite

Isaac M Daniel, I. Daniel, Zuo-yu Sun, 2003 .

EFFECT OF FIBER WAVINESS ON STIFFNESS AND STRENGTH REDUCTION OF UNIDIRECTIONAL COMPOSITES UNDER COMPRESSIVE LOADING

Isaac M Daniel, Hao-Ming Hsiao, H. Hsiao, 1996 .

Multiscale Hybrid Nano/Microcomposites–Processing, Characterization, and Analysis

I. Daniel, Jeong-Min Cho, Jeong-min Cho, 2009 .

Thermomechanical enhancement of fiber composites with carbon nanoparticles

I. Daniel, Jeong-Min Cho, Jeong-min Cho, 2008 .

Effect of fiber waviness on the compressive behavior of thick composites

H. Hsiao, I. Daniel, S. Wooh, 1994 .

SOLUTION TO INVERSE HEAT CONDUCTION PROBLEM IN NANOSCALE USING SEQUENTIAL METHOD

Isaac M Daniel, I. Daniel, S. K. Kim, 2003 .

Dynamic compressive behavior of thick composite materials

Isaac M Daniel, Hao-Ming Hsiao, R. D. Cordes, 1998 .

Method for Compression Testing of Composite Materials at High Strain Rates

I. Daniel, R. H. Labedz, 1983 .

Nonlinear Elastic Behavior of Unidirectional Composites With Fiber Waviness Under Compressive Loading

Isaac M Daniel, Hao-Ming Hsiao, H. Hsiao, 1996 .

Biaxial testing of [O2/±45]s graphite/epoxy plates with holes

Isaac M Daniel, I. Daniel, 1982 .

Characterization of Anisotropic Polymeric Foam Under Static and Dynamic Loading

Isaac M Daniel, I. Daniel, Jeong Min Cho, 2011 .

Characterization and modeling of polymeric foam under multi-axial static and dynamic loading

I. Daniel, B. T. Werner, J. Fenner, 2017 .

Nondestructive evaluation techniques for composite materials

Isaac M Daniel, T. Liber, I. Daniel, 1979 .

Clay/Epoxy Nanocomposites

E. Gdoutos, I. Daniel, 2009 .

Determination of chemical cure shrinkage in woven-glass/epoxy laminates

I. Daniel, D. Karalekas, J. Gotro, 1989 .

Strain Rate Effects on the Transverse Compressive and Shear Behavior of Unidirectional Composites

Isaac M Daniel, Hao-Ming Hsiao, R. D. Cordes, 1999 .

Cure Cycle Effect on Composite Structures Manufactured by Resin Transfer Molding

Isaac M Daniel, I. Daniel, Yeong K. Kim, 2002 .

New kinetic model for degree of cure and viscosity in liquid molding application

I. Daniel, M. Um, 2000 .

Determination of relaxation modulus of polymers and composites

I. Daniel, Yeong-Kook Kim, 2000 .

LAMINATION RESIDUAL STRAINS AND STRESSES IN HYBRID LAMINATES.

I. Daniel, T. Liber, 1977 .

Three-Dimensional Analysis of Hypoid Gears

Isaac M Daniel, I. Daniel, 1971 .

Characterization of Porosity in Thick Graphite/Epoxy Composites

I. Daniel, I. Komsky, S. Wooh, 1991 .

Mechanical and thermal properties of graphite platelet/epoxy composites

Isaac M Daniel, I. Daniel, A. Yasmin, 2004 .

Processing of Clay/Epoxy Nanocomposites with A Three-Roll Mill Machine

I. Daniel, A. Yasmin, J. L. Abot, 2002 .

Mechanical and Thermoviscoelastic Behavior of Clay/Epoxy Nanocomposites

I. Daniel, A. Yasmin, J. L. Abot, 2002 .

Determination of three-dimensional permeability of fiber preforms by the inverse parameter estimation technique

Isaac M Daniel, I. Daniel, S. K. Kim, 2003 .

Flow modeling of the VARTM process including progressive saturation effects

Isaac M Daniel, I. Daniel, John M. Bayldon, 2009 .

A NEW INTERPOLATED MODEL FOR PREFORM COMPACTION IN THE VACUUM ASSISTED RESIN TRANSFER MOLDING PROCESS

I. Daniel, W. P. Murphy, John M. Bayldon, 2008 .

Full field monitoring of thickness variation in vacuum assisted resin transfer molding (VARTM)

I. Daniel, John M. Bayldon, 2005 .

Fatigue damage mechanisms and residual properties of graphite/epoxy laminates

Isaac M Daniel, I. Daniel, A. Charewicz, 1986 .

Constitutive Behavior and Damage Characterization of High Temperature Polymer Composites

I. Daniel, Zuo-yu Sun, J. J. Luo, 2001 .

Effect of laminate construction on residual stresses in graphite/polyimide composites

Isaac M Daniel, T. Liber, I. Daniel, 1977 .

Optimal control of accelerator concentration for resin transfer molding process

Isaac M Daniel, I. Daniel, S. K. Kim, 2003 .

Thermomechanical Behavior of Multilayer Structures in Microelectronics

Isaac M Daniel, I. Daniel, J. Gotro, 1990 .

Residual stresses and warpage in woven-glass/epoxy laminates

Isaac M Daniel, I. G. Zewi, I. Daniel, 1987 .

The behavior of ceramic matrix fiber composites under longitudinal loading

Isaac M Daniel, J. W. Lee, J. W. Lee, 1993 .

Constitutive behavior and failure criteria for composites under static and dynamic loading

Isaac M Daniel, I. Daniel, 2015 .

Strain-rate-dependent behavior of polymeric foams

I. Daniel, Jeong-Min Cho, Jeong-min Cho, 2011 .

Characterization of Polymeric Foams under Multi-Axial Static and Dynamic Loading

I. Daniel, Jeong-Min Cho, 2010 .

Behavior of graphite/epoxy plates with holes under biaxial loading

Isaac M. Daniel, I. Daniel, 1980 .

BEHAVIOR OF UNIAXIALLY LOADED GRAPHITE/EPOXY PLATES WITH HOLES.

I. Daniel, 1978 .

Mixed-mode failure of composite laminates with cracks

I. Daniel, 1985 .

Through-thickness characterization of thick composite laminates

I. Daniel, J. J. Luo, P. Schubel, 2006 .

Strain rate behavior of composite materials

H. Hsiao, I. Daniel, 1998 .

Strain Rate Effects on Failure of a Toughened Matrix Composite

I. Daniel, B. T. Werner, J. Schaefer, 2014 .

Development of orthotropic birefringent materials for photoelastic stress analysis

I. Daniel, G. Koller, T. Niiro, 1981 .

Method for Monitoring In-Plane Shear Modulus in Fatigue Testing of Composites

J. W. Lee, I. Daniel, G. Yaniv, 1989 .

Rate Effects on Delamination Fracture Toughness of Graphite/Epoxy Composites

I. Daniel, G. Yaniv, J. W. Auser, 1987 .

Determination of fracture toughness by photoelastic coating

I. Daniel, H. C. Soo, 1987 .

Mechanical characterization of graphite platelet nanocomposites through molecular mechanics and continuum modeling

I. Daniel, J. J. Luo, J. Cho, 2006 .

Hybrid nanoreinforced carbon/epoxy composites for enhanced damage tolerance and fatigue life

I. Daniel, J. Fenner, 2014 .

Enhancement of Thermomechanical Properties of Carbon Fabric/Epoxy Composites with Carbon Nanotubes

I. Daniel, J. Cho, 2008 .

A gas flow method for determination of in‐plane permeability of fiber preforms

I. Daniel, M. Um, B. W. Childs, 2001 .

Processing and characterization of epoxy/clay nanocomposites

E. Gdoutos, I. Daniel, H. Miyagawa, 2003 .

Transverse creep behavior of a unidirectional metal matrix composite

I. Daniel, H. Chun, 1997 .

Deformation and failure of longitudinally loaded brittle-matrix composites

J. W. Lee, I. Daniel, 1992 .

Evaluation of composite flattened tubular specimen

I. Daniel, T. Liber, 2013 .

Testing the 2-3 Shear Strength of Unidirectional Composite

I. Daniel, J. Fenner, 2018, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5.

In-plane mechanical, thermal and viscoelastic properties of a satin fabric carbon/epoxy composite

I. Daniel, A. J. Jacobsen, A. Yasmin, 2004 .

A Constitutive Model for Fiber-reinforced Polymer Composites

I. Daniel, B. T. Werner, J. Fenner, 2010 .

Characterization and Constitutive Modeling of Composite Materials Under Static and Dynamic Loading

I. Daniel, B. T. Werner, J. Fenner, 2011 .

Evaluation of hybrid composite materials in cylindrical specimen geometries

I. Daniel, T. Liber, 1976 .

Failure mechanisms and damage evolutionin crossply ceramic-matrix composites

I. Daniel, G. Anastassopoulos, 1995 .

Processing of clay/epoxy nanocomposites by shear mixing

I. Daniel, A. Yasmin, J. Abot, 2003 .

Engineering Mechanics of Composite Materials

Isaac M Daniel, Ori Ishai, I. Daniel, 1994 .

Effects of block copolymer dispersant and nanotube length on reinforcement of carbon/epoxy composites

D. Dikin, I. Daniel, Jeong-Min Cho, 2008 .

A study of cure kinetics by the use of dynamic differential scanning calorimetry

I. Daniel, M. Um, B. Hwang, 2002 .

Hygroscopic Behavior of Woven Fabric Carbon-Epoxy Composites

I. Daniel, A. Yasmin, J. Abot, 2005 .

Photoelastic Study of Crack Propagation In Composite Models

I. Daniel, 1970 .

Characterization and modeling of stain-rate-dependent behavior of polymeric foams

I. Daniel, Jeong-min Cho, B. Werner, 2013 .

Failure Modes of Composite Sandwich Beams

E. Gdoutos, I. Daniel, E. Gdoutos, 2002 .

Fabrication, testing and analysis of composite sandwich beams

Jandro L. Abot, Isaac M. Daniel, I. Daniel, 2000 .

Determination of Critical Tearing Energy of Tyre Rubber

E. Gdoutos, I. Daniel, P. Schubel, 2004 .

FRACTURE MECHANICS OF RUBBER UDC 539

E. Gdoutos, I. Daniel, P. Schubel, 2003 .

Compression facing wrinkling of composite sandwich structures

Emmanuel E. Gdoutos, K. A. Wang, Isaac M. Daniel, 2003 .

Nonlinear behavior of composite sandwich beams in three-point bending

E. Gdoutos, I. Daniel, K. A. Wang, 2001 .

Fatigue failure of sandwich beams with face sheet wrinkle defects

M. K. Leong, C. F. Hvejsel, E. Lund, 2012 .

Size Effect and Fracture Characteristics of Composite Laminates

Zdenek P. Bazant, Isaac M. Daniel, Z. Bažant, 1996 .

Determination of shear modulus of single fibers

I. Daniel, C. Tsai, 1999 .

Method for thermo-mechanical characterization of single fibers

I. Daniel, C.-L. Tsai, 1994 .

Measurement of longitudinal shear modulus of single fibers by means of a torsional pendulum

I. Daniel, C. Tsai, J. J. Luo, 1993 .

Deformation of Inhomogeneous Elastic Solids With Two-Dimensional Damage

I. Daniel, J. J. Luo, 2001 .

A cylinder model for characterization of deformation and damage development in a unidirectional composite

I. Daniel, J. Luo, 2000 .

Behavior of a Unidirectional Metal-Matrix Composite Under Thermomechanical Loading

I. Daniel, H. Chun, 1996 .

Thermoelastoplastic analysis of a filamentary metal matrix composite

I. Daniel, H. Chun, 1995 .

Residual thermal stresses in a filamentary SiC Al composite

I. Daniel, H. Chun, S. Wooh, 1995 .

Method for hygromechanical characterization of graphite/epoxy composite

I. Daniel, G. Yaniv, Gus Peimanidis, 1987 .

Yield Criterion for Polymeric Matrix Under Static and Dynamic Loading

I. Daniel, B. Werner, 2015 .

Characterization and modeling of polymeric matrix under multi-axial static and dynamic loading

I. Daniel, B. Werner, 2014 .

Characterization of Porosity in Thick Composites Using Ultrasonic Wave Velocity Measurements

I. Daniel, I. Komsky, S. C. Wooh, 1993 .

Real-time ultrasonic monitoring of fiber-matrix debonding in ceramic-matrix composite

I. Daniel, S. Wooh, 1994 .

Torsional Response of Rectangular Composite Laminates

Isaac M Daniel, G. Yaniv, I. Daniel, 1990 .

Effects of material and geometric nonlinearities on the tensile and compressive behavior of composite materials with fiber waviness

Isaac M Daniel, I. Daniel, H. Chun, 2001 .

STRAIN RATE CHARACTERIZATION OF UNIDIRECTIONAL GRAPHITE/EPOXY COMPOSITE.

I. Daniel, R. H. Labedz, W. G. Hamilton, 1982 .

Size Effect on Strength of Laminate-Foam Sandwich Plates

Z. Bažant, I. Daniel, Qiang Yu, 2006 .

Size Effect in Fracture of Sandwich Structure Components: Foam and Laminate

Z. Bažant, I. Daniel, D. Novák, 2001, Three-Dimensional Effects in Composite and Sandwich Structures.

Size effect on compression strength of fiber composites failing by kink band propagation

Zdeněk P. Bažant, Emilie Becq-Giraudon, Goangseup Zi, 1999 .

FAILURE MECHANISMS AND FRACTURE OF COMPOSITE LAMINATES WITH STRESS CONCENTRATIONS.

I. Daniel, 1982 .

Biaxial Testing of Graphite/Epoxy Laminates with Cracks

I. Daniel, 1981 .

Strain-Rate-Dependent Yield Criteria for Progressive Failure Analysis of Composite Laminates Based on the Northwestern Failure Theory

I. Daniel, J. Schaefer, 2018, Experimental mechanics.

Strain-Rate-Dependent Yield Criteria for Progressive Failure Analysis of Composite Laminates Based on the Northwestern Failure Theory

I. Daniel, J. Schaefer, J. Schaefer, 2018 .

A new yield and failure theory for composite materials under static and dynamic loading

I. Daniel, J. Fenner, Sam M. Daniel, 2017, International Journal of Solids and Structures.

Strain-Rate-Dependent Failure Criteria for Composite Laminates: Application of the Northwestern Failure Theory to Multiple Material Systems

I. Daniel, J. Schaefer, B. Werner, 2018 .

Yield and failure criteria for composite materials under static and dynamic loading

Isaac M Daniel, I. Daniel, 2016 .

Failure Criteria of Composite Materials Under Static and Dynamic Loading

I. Daniel, 2016 .

Strain-Rate-Dependent Yield Criteria for Composite Laminates

I. Daniel, J. Schaefer, J. Schaefer, 2016 .

on Dynamic Response and Failure of Composite Materials , DRaF 2014 Failure of Composite Materials under Multi-axial Static and Dynamic Loading

I. Daniel, 2014 .

Failure of Composite Materials under Multi-axial Static and Dynamic Loading☆

I. Daniel, 2014 .

Deformation and Failure of Angle-Ply Composite Laminates

Isaac M Daniel, Brian T. Werner, Joseph D. Schaefer, 2014 .

Yield Criteria For Matrix And Composite Materials Under Static And Dynamic Loading

I. Daniel, J. Schaefer, B. Werner, 2017 .

Effect of Ply Dispersion on Failure Characteristics of Multidirectional Laminates

I. Daniel, J. Schaefer, B. Werner, 2014 .

Characterization and Modeling of Polymeric Matrix Under Static and Dynamic Loading

I. Daniel, B. Werner, 2013 .

Impact and post impact behavior of composite sandwich panels

Isaac M Daniel, I. Daniel, J. Luo, 2007 .

Stress Analysis of Anisotropic Laminated Plates

I. Daniel, R. Rowlands, P. G. Rose, 1974 .

Application of holography to anisotropic composite plates

I. Daniel, R. Rowlands, 1972 .

The behavior of cracked cross-ply composite laminates under shear loading

I. Daniel, C. Tsai, 1992 .

Micromechanical analysis of filamentary metal matrix composites under longitudinal loading

E. Gdoutos, I. Daniel, D. Karalekas, 1991 .

Biaxial Testing of Graphite/Epoxy Composites Containing Stress Concentrations. Part II.

I. Daniel, I M Daniel, 1976 .

Strain Rate Effects on Mechanical Properties of Fiber Composites. Part 3.

I. Daniel, T. Liber, 1976 .

Lamination residual stresses in fiber composites

T. Liber, I. M. Daniel, I. Daniel, 1973 .

Three-dimensional photoelastic analysis of a fiber-reinforced composite model

I. Daniel, R. H. Marloff, 1969 .

Investigation indicates that stress field obtained corresponds to the thermal-stress field produced by a difference in the coefficients of thermal expansion of the matrix and the inclusion material

I. Daniel, A. Durelli, 1962 .

Shrinkage stresses around rigid inclusions

I. Daniel, A. Durelli, 1962 .

Mechanical characterization of a unidirectional composite by ultrasonic methods

I. Daniel, S. Wooh, 1991 .

Influence of core properties on the failure of composite sandwich beams

I. Daniel, 2009 .

Thermal stress analysis of a silicon carbide/aluminum composite

E. Gdoutos, I. Daniel, D. Karalekas, 1991 .

THERMAL DEFORMATIONS AND STRESSES IN COMPOSITE MATERIALS.

I. Daniel, 1980 .

New method for testing composites at very high strain rates

I. Daniel, T. Liber, R. H. Labedz, 1981 .

Deformation and Failure of Composite Sandwich Structures

E. Gdoutos, I. Daniel, Kuang-An Wang, 2003 .

Damage Mechanisms and Accumulation in Graphite/Epoxy Laminates,

Isaac M Daniel, I. Daniel, Alain Charewicz, 1986 .

Hybrid Nano/Microcomposites for Enhanced Damage Tolerance

I. Daniel, J. Fenner, 2011 .

Damage Development in Composite Laminates Under Monotonic Loading

I. Daniel, Jae Won Lee, 1989 .

EXPERIMENTAL STRESS ANALYSIS OF COMPOSITE MATERIALS

Isaac M Daniel, Robert E. Rowlands, I. Daniel, 1972 .

TESTING OF FIBER COMPOSITES AT HIGH STRAIN RATES.

I. Daniel, T. Liber, 1978 .

Development and characterization of orthotropic-birefringent materials

I. Daniel, G. Koller, T. Niiro, 1984 .

Mechanical properties and failure surface morphology of amine-cured epoxy/clay nanocomposites

I. Daniel, L. Drzal, H. Miyagawa, 2005 .

A Nondestructive Three-Dimensional Strain-Analysis Method

Isaac M Daniel, A. J. Durelli, I. Daniel, 1961 .

3427 - TEARING ENERGY OF TIRE RUBBER UNDER MODE I AND MODE III LOADING

E. Gdoutos, I. Daniel, P. Schubel, 2005 .

The Behavior of Advanced Filamentary Composite Plates with Cutouts.

Isaac M Daniel, Robert E. Rowlands, I. Daniel, 1973 .

On wave and fracture propagation in Rock Media

I. Daniel, R. Rowlands, 1975 .

Mechanical Characterization and Modeling of Ceramic Foam Materials

I. Daniel, J. Fenner, M.-Y. Chen, 2014 .

Wave Propagation In A Layered Model Due To Point Source Loading In A High-impedance Medium

R. L. Marino, I. Daniel, 1971 .

Wave propagation in layered model due to point-source loading in low-impedance medium

R. L. Marino, I. Daniel, 1971 .

Mechanical and Optical Characterization of Plasticized Polyvinyl Chloride

I. Daniel, 1966 .

Measurement of residual strains in boron-epoxy and glass-epoxy laminates

C. Chamis, I. Daniel, C. Chamis, 1975 .

I. Daniel, J. Byun, M. Um, 2009 .

Size effect and asymptotic matching analysis of fracture of closed-cell polymeric foam

G. Zi, Z. Bažant, I. Daniel, 2003 .

Mechanical Properties and Failure Behavior of Cord/Rubber Composites

Isaac M Daniel, Shiguo Rao, Emmanuel E. Gdoutos, 2004 .

Photoelastic analysis of stresses around oblique holes

Isaac M Daniel, I. Daniel, 1970 .

Strain-Rate-Dependent Failure of a Toughened Matrix Composite

I. Daniel, J. Schaefer, B. Werner, 2014, Experimental Mechanics.

Evaluation of the sensitivity of ultrasonic detection of disbonds in graphite/epoxy-to-metal joints

I. Daniel, S. Schramm, W. G. Hamilton, 1981 .

Evaluation of Sensitivity of Ultrasonic Detection of Disbonds in Graphite/Epoxy To Metal Joints

I. Daniel, S. Schramm, W. G. Hamilton, 1982 .

Evaluation of Sensitivity of Ultrasonic Detection of Delaminations in Graphite/Epoxy Laminates

I. Daniel, S. Schramm, W. G. Hamilton, 1980 .

LOAD INTRODUCTION IN TUBULAR COMPOSITE SPECIMENS

I. Daniel, G. Koller, R. Vanderby, 1979 .

Micromechanical analysis of nonlinear thermal deformation of filamentary metal matrix composites

E. Gdoutos, I. Daniel, D. Karalekas, 1991 .

Effects of strain rate on delamination fracture toughness of graphite/epoxy

Isaac M Daniel, I. Daniel, Aa Aliyu, 1985 .

Size Effect on Compressive Strength of Sandwich Panels with Fracture of Woven Laminate

I. Daniel, Qiang Yu, John M. Bayldon, 2006 .

Ultrasonic Techniques for Characterization of Manufacturing Defects in Thick Composites

I. Daniel, S. Wooh, 1989 .

Acoustic Emission Study of Failure Mechanisms in Ceramic Matrix Composite under Longitudinal Tensile Loading

Isaac M Daniel, I. Daniel, S. Wooh, 1995 .

Mechanical behaviour and failure criteria of composite materials under static and dynamic loading

I. Daniel, J. Fenner, Jeong-min Cho, 2009 .

Mixed-Mode and Mode-II Fatigue Crack Growth in Woven Composites

I. Daniel, J. Fenner, 2017 .

Fracture Toughness and Impact Damage Resistance of Nanoreinforced Carbon/Epoxy Composites

I. Daniel, J. Fenner, 2016 .

Analytical/experimental study of cracking in composite laminates under biaxial loading☆

I. Daniel, C. Tsai, 1991 .

REAL-TIME MONITORING OF DAMAGE DEVELOPMENT IN CROSSPLY COMPOSITE LAMINATES BY MEANS OF ULTRASONIC AND ACOUSTIC EMISSION METHODS

I. Daniel, H. Chun, S. Wooh, 1995 .

Fracture Toughness and Fatigue Behavior of Nanoreinforced Carbon/Epoxy Composites

I. Daniel, J. Fenner, 2014 .

Wave propagation in transversely impacted composite laminates

I. Daniel, T. Liber, R. H. Labedz, 1978 .

Wave propagation in composite materials with fibre waviness

I. Daniel, S. Wooh, 1995 .

Composite Materials: Testing and Design

I. Daniel, 1982 .

Failure of composite sandwich beams

E. Gdoutos, I. Daniel, K. A. Wang, 2002 .

Nondestructive Determination of Elastic Constants of Composite Materials

I. Daniel, S. Wooh, 1991 .

Gradient method for inverse heat conduction problem in nanoscale

I. Daniel, S. K. Kim, 2004 .

Thermal Deformations and Residual Stresses in Fiber Composites

I. Daniel, 1978 .

Real-Time Ultrasonic Investigation of Fiber-Matrix Debonding in Ceramic-Matrix Composite

I. Daniel, S. Wooh, 1993 .

Transient gas flow technique for inspection of fiber preforms in resin transfer molding

I. Daniel, S. K. Kim, 2005 .

Sublaminate-based lamination theory and symmetry properties of textile composite laminates

I. Daniel, J. J. Luo, 2004 .

Observation of Permeability Dependence on Flow Rate and Implications for Liquid Composite Molding

I. Daniel, Sun Kyoung Kim, 2007 .

Progressive matrix cracking of crossply composite laminates under biaxial loading

J. W. Lee, I. Daniel, C. Tsai, 1990 .