I. Burgert

发表

The Role of Wheat Awns in the Seed Dispersal Unit

R. Elbaum, Liron Zaltzman, I. Burgert, 2007, Science.

Actuation systems in plants as prototypes for bioinspired devices

I. Burgert, P. Fratzl, 2009, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

Mechanics without muscle: biomechanical inspiration from the plant world.

T. Speck, K. Mach, I. Burgert, 2010, Integrative and comparative biology.

One-step electrospun nanofiber-based composite ropes

Maurizio Prato, Ingo Burgert, Luqi Liu, 2007 .

Cell wall features with regard to mechanical performance. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture

Ingo Burgert, Lennart Salmén, I. Burgert, 2009 .

An autonomous shading system based on coupled wood bilayer elements

I. Burgert, M. Rüggeberg, C. Vailati, 2018 .

Mechano-sorptive creep in wood fibres

I. Burgert, M. Eder, L. Salmén, 2007, Wood Science and Technology.

Cellulose fibrils direct plant organ movements.

Peter Fratzl, Ingo Burgert, R. Elbaum, 2008, Faraday discussions.

In situ FT-IR microscopic study on enzymatic treatment of poplar wood cross-sections.

Ingo Burgert, Tilmann Rogge, Notburga Gierlinger, 2008, Biomacromolecules.

Cell-wall recovery after irreversible deformation of wood

Jozef Keckes, Manfred Burghammer, Peter Fratzl, 2003, Nature materials.

Structure–function relationships of four compression wood types: micromechanical properties at the tissue and fibre level

Jozef Keckes, Peter Fratzl, Ingo Burgert, 2004, Trees.

Hierarchically structured ceramics by high-precision nanoparticle casting of wood.

I. Burgert, O. Paris, A. Deshpande, 2006, Small.

Surfactant-free carnauba wax dispersion and its use for layer-by-layer assembled protective surface coatings on wood

I. Burgert, M. Österberg, Alina Lozhechnikova, 2017 .

Influence of varnishing on the vibro-mechanical properties of wood used for violins

I. Burgert, F. Schwarze, B. van Damme, 2019, Journal of Materials Science.

Bioinspired Wood Nanotechnology for Functional Materials

I. Burgert, L. Berglund, 2018, Advanced materials.

Enhanced plastic deformations of nanofibrillated cellulose film by adsorbed moisture and protein-mediated interactions.

I. Burgert, O. Ikkala, P. Laaksonen, 2015, Biomacromolecules.

The tensile strength of isolated wood rays of beech (Fagus sylvatica L.) and its significance for the biomechanics of living trees

I. Burgert, D. Eckstein, 2001, Trees.

The Influence of Rays on the Transverse Elastic Anisotropy in Green Wood of Deciduous Trees

K. Niklas, I. Burgert, A. Bernasconi, 2001 .

Wood and the Activity of Dead Tissue

I. Burgert, P. Fratzl, M. Eder, 2020, Advanced materials.

Upscaling of wood bilayers: design principles for controlling shape change and increasing moisture change rate

Markus Rüggeberg, Ingo Burgert, I. Burgert, 2017 .

The kinetics of wooden bilayers is not affected by different wood adhesive systems

I. Burgert, M. Rüggeberg, C. Vailati, 2018, Wood Science and Technology.

Photochemical synthesis of polymeric fiber coatings and their embedding in matrix material: morphology and nanomechanical properties at the fiber-matrix interface.

I. Burgert, A. Fery, Moritz Tebbe, 2012, ACS applied materials & interfaces.

Investigating the time-dependent zeta potential of wood surfaces.

I. Burgert, T. Luxbacher, B. Michen, 2018, Journal of colloid and interface science.

Deficient sucrose synthase activity in developing wood does not specifically affect cellulose biosynthesis, but causes an overall decrease in cell wall polymers.

M. Kumar, B. Sundberg, I. Burgert, 2014, The New phytologist.

Mechanical behavior of chemically modified Norway spruce: a generic hierarchical model for wood modifications

H. Herrmann, I. Burgert, F. Wittel, 2019, Wood Science and Technology.

Hybrid wood materials with improved fire retardance by bio-inspired mineralisation on the nano- and submicron level

I. Burgert, Sabyasachi Gaan, V. Merk, 2015 .

Micromechanics of Cell Walls

J. Dunlop, I. Burgert, 2017 .

Nanofibrillated cellulose composites and wood derived scaffolds for functional materials

I. Burgert, T. Keplinger, Xiao-qi Wang, 2019, Journal of Materials Chemistry A.

Bio-inspired functional wood-based materials – hybrids and replicates

I. Burgert, L. Berglund, C. Zollfrank, 2015 .

Properties of chemically and mechanically isolated fibres of spruce (Picea abies[L.] Karst.). Part 2: Twisting phenomena

S. Stanzl-Tschegg, I. Burgert, P. Fratzl, 2005 .

Mechanical model for the deformation of the wood cell wall

I. Burgert, P. Fratzl, J. Keckes, 2004, International Journal of Materials Research.

Mechanical model for the deformation of the wood cell wall

I. Burgert, P. Fratzl, J. Keckes, 2004, International Journal of Materials Research - Zeitschrift für Metallkunde.

A Comparison of Two Techniques for Wood Fibre Isolation ‐ Evaluation by Tensile Tests on Single Fibres with Different Microfibril Angle

I. Burgert, P. Fratzl, J. Keckes, 2002 .

Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 3: Mechanical characterisation

S. Stanzl-Tschegg, I. Burgert, P. Fratzl, 2005 .

Moisture changes in the plant cell wall force cellulose crystallites to deform.

S. Zabler, I. Burgert, P. Fratzl, 2010, Journal of structural biology.

The influence of multi-layered varnishes on moisture protection and vibrational properties of violin wood

I. Burgert, F. Schwarze, B. van Damme, 2019, Scientific Reports.

Even Visually Intact Cell Walls in Waterlogged Archaeological Wood Are Chemically Deteriorated and Mechanically Fragile: A Case of a 170 Year-Old Shipwreck

I. Burgert, H. Zhou, Yafang Yin, 2020, Molecules.

Adaptive Growth of Gymnosperm Branches-Ultrastructural and Micromechanical Examinations

I. Burgert, K. Jungnikl, 2004, Journal of Plant Growth Regulation.

Disrupting Two Arabidopsis thaliana Xylosyltransferase Genes Results in Plants Deficient in Xyloglucan, a Major Primary Cell Wall Component[W][OA]

I. Burgert, N. Raikhel, M. Pauly, 2008, The Plant Cell Online.

UV-protection of wood surfaces by controlled morphology fine-tuning of ZnO nanostructures

I. Burgert, Y. Romanyuk, P. Fuchs, 2016 .

Cell wall structure and formation of maturing fibres of moso bamboo (Phyllostachys pubescens) increase buckling resistance

I. Burgert, B. Fei, B. Zhang, 2012, Journal of The Royal Society Interface.

Analyzing Plant Cell Wall Ultrastructure by Scanning Near-Field Optical Microscopy (SNOM).

I. Burgert, T. Keplinger, 2020, Methods in molecular biology.

Investigations on densified beech wood for application as a swelling dowel in timber joints

I. Burgert, T. Schnider, Fabio Gramazio, 2019, Holzforschung.

Biotechnological Wood Modification with Selective White-Rot Fungi and Its Molecular Mechanisms

I. Burgert, K. Fackler, M. Schmutzer, 2007 .

Biotehnološka razgradnja i molekularni mehanizmi razgradnje drveta pomoću selektivnih gljiva, uzročnika bijele truleži

I. Burgert, K. Fackler, M. Schmutzer, 2007 .

Hydroxyl accessibility in wood cell walls as affected by drying and re-wetting procedures

I. Burgert, L. Thygesen, E. E. Thybring, 2017, Cellulose.

Layer-by-layer deposition on a heterogeneous surface: Effect of sorption kinetics on the growth of polyelectrolyte multilayers.

I. Burgert, Hervé Bellanger, B. Michen, 2017, Journal of colloid and interface science.

The effect of altered lignin composition on mechanical properties of CINNAMYL ALCOHOL DEHYDROGENASE (CAD) deficient poplars

I. Burgert, N. Gierlinger, W. Boerjan, 2018, Planta.

Age Effects on Hypocotyl Mechanics

I. Burgert, J. Lisec, M. Eder, 2016, PloS one.

Ultrastructure and mechanical properties of populus wood with reduced lignin content caused by transgenic down-regulation of cinnamate 4-hydroxylase.

M. Kumar, B. Sundberg, I. Burgert, 2010, Biomacromolecules.

Honeycomb Actuators Inspired by the Unfolding of Ice Plant Seed Capsules

J. Dunlop, I. Burgert, P. Fratzl, 2016, PloS one.

Biomaterial Wood: Wood-Based and Bioinspired Materials

I. Burgert, M. Rüggeberg, V. Merk, 2016 .

A comprehensive analysis of the relation of cellulose microfibril orientation and lignin content in the S2 layer of different tissue types of spruce wood (Picea abies (L.) Karst.)

I. Burgert, G. Koch, K. Jungnikl, 2008 .

Significant influence of lignin on axial stiffness of poplar wood at low microfibril angle under wet conditions

I. Burgert, N. Gierlinger, W. Boerjan, 2019 .

Unravelling the impact of lignin on cell wall mechanics: a comprehensive study on young poplar trees downregulated for CINNAMYL ALCOHOL DEHYDROGENASE (CAD)

I. Burgert, N. Gierlinger, W. Boerjan, 2017, The Plant journal : for cell and molecular biology.

Highly Efficient UV Protection of the Biomaterial Wood by A Transparent TiO2/Ce Xerogel.

I. Burgert, G. Jeschke, Huizhang Guo, 2017, ACS applied materials & interfaces.

Nanoparticle‐Mediated Enzyme Immobilization on Cellulose Fibers: Reusable Biocatalytic Systems for Cascade Reactions

I. Burgert, M. Chanana, Christian Goldhahn, 2019, Advanced Materials Interfaces.

Mechanical Properties Tailoring of 3D Printed Photoresponsive Nanocellulose Composites

I. Burgert, Gustav Nyström, T. Zimmermann, 2020, Advanced Functional Materials.

Scalable aesthetic transparent wood for energy efficient buildings

J. Dai, Liangbing Hu, Emily Hitz, 2020, Nature Communications.

Sustainable wood electronics by iron-catalyzed laser-induced graphitization for large-scale applications

I. Burgert, Huizhang Guo, G. Panzarasa, 2022, Nature Communications.

Dictating anisotropic electric conductivity of a transparent copper nanowire coating by the surface structure of wood

I. Burgert, A. Wäckerlin, Huizhang Guo, 2018, Journal of The Royal Society Interface.

Green Synthesis of Hierarchical Metal–Organic Framework/Wood Functional Composites with Superior Mechanical Properties

B. Puértolas, I. Burgert, J. Pérez‐Ramírez, 2020, Advanced science.

Detection of the Fracture Path under Tensile Loads through in situ Tests in an ESEM Chamber

S. Stanzl-Tschegg, I. Burgert, K. Frühmann, 2003 .

Enzyme immobilization inside the porous wood structure: a natural scaffold for continuous-flow biocatalysis

I. Burgert, M. Chanana, M. Schubert, 2020, RSC advances.

Mineralization of wood by calcium carbonate insertion for improved flame retardancy

I. Burgert, Sabyasachi Gaan, V. Merk, 2016 .

The implication of chemical extraction treatments on the cell wall nanostructure of softwood

I. Burgert, P. Fratzl, O. Paris, 2008 .

Emerging Engineered Wood for Building Applications.

Liangbing Hu, D. Rammer, I. Burgert, 2022, Chemical reviews.

Functional lignocellulosic materials prepared by ATRP from a wood scaffold

I. Burgert, V. Merk, T. Keplinger, 2016, Scientific Reports.

Scalable and Sustainable Wood for Efficient Mechanical Energy Conversion in Buildings via Triboelectric Effects

Zhong Lin Wang, I. Burgert, D. Hegemann, 2022, Nano Energy.

Improvement of wood material properties via in situ polymerization of styrene into tosylated cell walls

I. Burgert, N. Gierlinger, J. Koetz, 2014 .

Influence of over-expression of the FLOWERING PROMOTING FACTOR 1 gene (FPF1) from Arabidopsis on wood formation in hybrid poplar (Populus tremula L. × P. tremuloides Michx.)

I. Burgert, S. Melzer, G. Koch, 2012, Planta.

The kinetics of wooden bilayers is not affected by different wood adhesive systems

I. Burgert, M. Rüggeberg, C. Vailati, 2018, Wood Science and Technology.

Sustainability in Wood Products: A New Perspective for Handling Natural Diversity.

I. Burgert, G. Panzarasa, M. Schubert, 2022, Chemical reviews.

Densified delignified wood as bio-based fiber reinforcement for stiffness increase of timber structures

I. Burgert, A. Frangi, P. Grönquist, 2022, Composites Part A: Applied Science and Manufacturing.

Mechanical behaviour of chemically modified Norway spruce (Picea abies L. Karst.): Experimental mechanical studies on spruce wood after methacrylation and in situ polymerization of styrene

I. Burgert, F. Wittel, M. Rüggeberg, 2019, Wood Science and Technology.

The radial reinforcement of the wood structure and its implication on mechanical and fracture mechanical properties—A comparison between two tree species

I. Burgert, A. Reiterer, G. Sinn, 2002 .

Thermoresponsive Smart Gating Wood Membranes

I. Burgert, G. Panzarasa, T. Keplinger, 2022, ACS sustainable chemistry & engineering.

Smart Hierarchical Bio‐Based Materials by Formation of Stimuli‐Responsive Hydrogels inside the Microporous Structure of Wood

I. Burgert, P. Bock, John K. Berg, 2016 .

A versatile strategy for grafting polymers to wood cell walls.

I. Burgert, N. Gierlinger, P. Hass, 2015, Acta biomaterialia.

Plant material features responsible for bamboo's excellent mechanical performance: a comparison of tensile properties of bamboo and spruce at the tissue, fibre and cell wall levels.

I. Burgert, N. Gierlinger, T. Keplinger, 2014, Annals of botany.

Fully biodegradable modification of wood for improvement of dimensional stability and water absorption properties by poly(ε-caprolactone) grafting into the cell walls

I. Burgert, J. Koetz, P. Hass, 2014 .

Flavonoid insertion into cell walls improves wood properties.

I. Burgert, J. Koetz, A. Masic, 2012, ACS applied materials & interfaces.

Oriented Crystallization of Barium Sulfate Confined in Hierarchical Cellular Structures

I. Burgert, C. Krywka, V. Merk, 2017 .

Non-biocidal preservation of wood against brown-rot fungi with a TiO2/Ce xerogel

I. Burgert, F. Schwarze, J. Ribera, 2018 .

Shaking table investigation of a low-cost and sustainable timber-based energy dissipation system with recentering ability

I. Burgert, B. Stojadinović, G. Panzarasa, 2022, Bulletin of Earthquake Engineering.

Structure–property–function relationships of natural and engineered wood

Liangbing Hu, Chaoji Chen, I. Burgert, 2020, Nature Reviews Materials.

CHAPTER 6:Materials Design Inspired by Tree and Wood Architecture

I. Burgert, 2013 .

Struvite Mineralized Wood as Sustainable Building Material: Mechanical and Combustion Behavior

I. Burgert, Huizhang Guo, C. Schlepütz, 2020 .

Bioinspired Struvite Mineralization for Fire-Resistant Wood.

I. Burgert, M. Griffa, Huizhang Guo, 2019, ACS applied materials & interfaces.

Designing functional wood materials for novel engineering applications

I. Burgert, G. Panzarasa, 2021, Holzforschung.

Tunable Wood by Reversible Interlocking and Bioinspired Mechanical Gradients

I. Burgert, Yaru Wang, A. Hirt, 2019, Advanced science.

Enhanced mechanical energy conversion with selectively decayed wood

I. Burgert, F. Schwarze, J. Ribera, 2021, Science Advances.

A Sustainable and Biodegradable Wood Sponge Piezoelectric Nanogenerator for Sensing and Energy Harvesting Applications.

Zhong Lin Wang, I. Burgert, Hengyu Guo, 2020, ACS nano.

Delignified and Densified Cellulose Bulk Materials with Excellent Tensile Properties for Sustainable Engineering.

I. Burgert, D. Widner, T. Keplinger, 2018, ACS applied materials & interfaces.

On the role of interface polymers for the mechanics of natural polymeric composites

Himadri S. Gupta, Peter Fratzl, Ingo Burgert, 2004 .

Molecular changes during tensile deformation of single wood fibers followed by Raman microscopy.

Ingo Burgert, Notburga Gierlinger, Manfred Schwanninger, 2006, Biomacromolecules.

Bamboo’s tissue structure facilitates large bending deflections

I. Burgert, Changhua Fang, B. Fei, 2021, Bioinspiration & biomimetics.

Reorientation of cellulose nanowhiskers in agarose hydrogels under tensile loading.

I. Burgert, Markus Rueggeberg, J. Putaux, 2012, Biomacromolecules.

Lightweight, strong, moldable wood via cell wall engineering as a sustainable structural material

Yonggang Yao, Liangbing Hu, Chaoji Chen, 2021, Science.

Natural Wood-Based Catalytic Membrane Microreactors for Continuous Hydrogen Generation.

I. Burgert, S. Zeeman, S. Mitchell, 2022, ACS applied materials & interfaces.

Wood–Gelatin Bio-Composite Membranes with Tunable Flux

I. Burgert, T. Lüthi, M. Chanana, 2020, ACS Sustainable Chemistry & Engineering.

Structural and mechanical design of tissue interfaces in the giant reed Arundo donax

Thomas Speck, Markus Rüggeberg, Ingo Burgert, 2010, Journal of The Royal Society Interface.

About the influence of a water-based priming system on the interactions between wood and one-component polyurethane adhesive studied by atomic force microscopy and confocal Raman spectroscopy imaging

I. Burgert, Oliver Kläusler, T. Keplinger, 2018 .

Influence of the polymeric interphase design on the interfacial properties of (fiber-reinforced) composites.

I. Burgert, H. Schmalz, A. Fery, 2013, ACS applied materials & interfaces.

Significant influence of lignin on axial elastic modulus of poplar wood at low microfibril angles under wet conditions

I. Burgert, N. Gierlinger, W. Boerjan, 2019, Journal of experimental botany.

Mechanics of the Wood Cell Wall

I. Burgert, P. Fratzl, J. Keckes, 2006 .

CHITINASE-LIKE1/POM-POM1 and Its Homolog CTL2 Are Glucan-Interacting Proteins Important for Cellulose Biosynthesis in Arabidopsis[W][OA]

I. Burgert, C. Somerville, M. Hauser, 2012, Plant Cell.

A zoom into the nanoscale texture of secondary cell walls

Markus Rüggeberg, Ingo Burgert, Notburga Gierlinger, 2014, Plant Methods.

What Are Natural Fibres

I. Burgert, M. Eder, J. Müssig, 2010 .

Biomimetics and Biotemplating of Natural Materials

Peter Fratzl, Ingo Burgert, I. Burgert, 2010 .

Micromechanical properties of common yew (Taxus baccata) and Norway spruce (Picea abies) transition wood fibers subjected to longitudinal tension

I. Burgert, M. Eder, P. Niemz, 2008, Journal of Wood Science.

Plant micro- and nanomechanics: experimental techniques for plant cell-wall analysis.

Ingo Burgert, Tobias Keplinger, I. Burgert, 2013, Journal of experimental botany.

Pectin may hinder the unfolding of xyloglucan chains during cell deformation: implications of the mechanical performance of Arabidopsis hypocotyls with pectin alterations.

J. Dunlop, I. Burgert, M. Pauly, 2009, Molecular plant.

Mechanics of the Expanding Cell Wall

I. Burgert, P. Fratzl, 2006 .

The effect of altered lignin composition on mechanical properties of CINNAMYL ALCOHOL DEHYDROGENASE (CAD) deficient poplars

I. Burgert, N. Gierlinger, W. Boerjan, 2017, Planta.

Mesoporosity of Delignified Wood Investigated by Water Vapor Sorption

I. Burgert, P. Grönquist, T. Keplinger, 2019, ACS omega.

Structure-function relationships of different vascular bundle types in the stem of the Mexican fanpalm (Washingtonia robusta).

Thomas Speck, Markus Rüggeberg, Ingo Burgert, 2009, The New phytologist.

Functionalized wood with tunable tribopolarity for efficient triboelectric nanogenerators

I. Burgert, Hengyu Guo, Changsheng Wu, 2021, Matter.

Microtensile Testing of Wood Fibers Combined with Video Extensometry for Efficient Strain Detection

S. Stanzl-Tschegg, I. Burgert, P. Fratzl, 2003 .

Adhesives free bark panels: An alternative application for a waste material

I. Burgert, M. Eder, Ferréol Berendt, 2023, PloS one.

Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 1: Structural and chemical characterisation

Ingo Burgert, Notburga Gierlinger, I. Burgert, 2005 .

A close-up view of wood structure and properties across a growth ring of Norway spruce (Picea abies [L] Karst.)

I. Burgert, M. Eder, K. Jungnikl, 2009, Trees.

The fracture behaviour of single wood fibres is governed by geometrical constraints: in situ ESEM studies on three fibre types

Ingo Burgert, Michaela Eder, S. Stanzl-Tschegg, 2008, Wood Science and Technology.

Cellulose lattice strains and stress transfer in native and delignified wood.

I. Burgert, P. Fratzl, M. Eder, 2022, Carbohydrate polymers.

Plants control the properties and actuation of their organs through the orientation of cellulose fibrils in their cell walls.

Peter Fratzl, Ingo Burgert, I. Burgert, 2009, Integrative and comparative biology.

The effect of (induced) dislocations on the tensile properties of individual Norway spruce fibres

I. Burgert, M. Eder, G. Daniel, 2007 .

Exploring the micromechanical design of plant cell walls.

Ingo Burgert, I. Burgert, 2006, American journal of botany.

Renewable and functional wood materials by grafting polymerization within cell walls.

I. Burgert, P. Hass, V. Merk, 2014, ChemSusChem.

Wood Derived Cellulose Scaffolds—Processing and Mechanics

I. Burgert, F. Wittel, M. Rüggeberg, 2020, Advanced materials.

Enhanced cellulose orientation analysis in complex model plant tissues.

B. Sundberg, I. Burgert, P. Fratzl, 2013, Journal of structural biology.

A close-up view of the mechanical design of arborescent plants at different levels of hierarchy - requirements and structural solutions

I. Burgert, M. Eder, M. Rüggeberg, 2009 .

Delignified wood-polymer interpenetrating composites exceeding the rule of mixtures.

I. Burgert, K. Masania, T. Keplinger, 2019, ACS applied materials & interfaces.

Tracking of Short Distance Transport Pathways in Biological Tissues by Ultra-Small Nanoparticles

I. Burgert, A. Lauria, John K. Berg, 2018, Front. Chem..

Bio-Inspired Wooden Actuators for Large Scale Applications

Markus Rüggeberg, Ingo Burgert, I. Burgert, 2015, PloS one.

Mode I Fracture Behaviour on the Growth Ring Scale and Cellular Level of Spruce (Picea abies [L.] Karst.) and Beech (Fagus sylvatica L.) Loaded in the TR Crack Propagation System

S. Stanzl-Tschegg, I. Burgert, E. Tschegg, 2003 .

Janus wood membranes for autonomous water transport and fog collection

I. Burgert, K. Tu, T. Keplinger, 2020, Journal of Materials Chemistry A.

Intercellular Matrix Infiltration Improves the Wet Strength of Delignified Wood Composites.

I. Burgert, T. Keplinger, C. Dreimol, 2022, ACS applied materials & interfaces.

Elastomechanical properties of young beech trees (Fagus sylvatica L.) grown at elevated and ambient CO2 content

I. Burgert, A. Bernasconi, D. Eckstein, 2000, Holz als Roh- und Werkstoff.

Hybrid wood materials with magnetic anisotropy dictated by the hierarchical cell structure.

I. Burgert, N. Gierlinger, A. Hirt, 2014, ACS applied materials & interfaces.

The possible relationship between dislocations and mechanical properties of different spruce fibres: A single fibre study

I. Burgert, P. Ander, K. Frühmann, 2003 .

Stress generation in the tension wood of poplar is based on the lateral swelling power of the G-layer.

George Jeronimidis, Peter Fratzl, Ingo Burgert, 2008, The Plant journal : for cell and molecular biology.

Dislocations in single hemp fibres—investigations into the relationship of structural distortions and tensile properties at the cell wall level

I. Burgert, M. Eder, L. G. Thygesen, 2007 .

Characterization of Wood Derived Hierarchical Cellulose Scaffolds for Multifunctional Applications

I. Burgert, T. Keplinger, Jana S. Segmehl, 2018, Materials.

Tensile and compressive stresses in tracheids are induced by swelling based on geometrical constraints of the wood cell

Peter Fratzl, Ingo Burgert, Notburga Gierlinger, 2007, Planta.

Evidence for the strength function of rays in living trees

I. Burgert, A. Bernasconi, I. Burgert, 1999, Holz als Roh- und Werkstoff.

Magnetic wood by in situ synthesis of iron oxide nanoparticles via a microwave-assisted route

I. Burgert, A. Laromaine, A. Roig, 2018 .

Structural and mechanical characterization of growing Arabidopsis plant cell walls.

I. Burgert, M. Eder, F. Saxe, 2015, Methods in molecular biology.

Measuring the distribution of cellulose microfibril angles in primary cell walls by small angle X-ray scattering

I. Burgert, P. Fratzl, M. Eder, 2014, Plant Methods.

Real test-bed studies at the ETH House of Natural Resources – wood surface protection for outdoor applications

I. Burgert, B. Michen, 2018 .

High-Performance All-Bio-Based Laminates Derived from Delignified Wood

I. Burgert, P. Fratzl, K. Masania, 2021, ACS Sustainable Chemistry & Engineering.

Luminescent and Hydrophobic Wood Films as Optical Lighting Materials.

I. Burgert, Mathias Sorieul, K. Tu, 2020, ACS nano.

SECONDARY CELL WALL POLYMERS STUDIED BY CONFOCAL RAMAN MICROSCOPY: SPATIAL DISTRIBUTION, ORIENTATION, AND MOLECULAR DEFORMATION*

I. Burgert, N. Gierlinger, 2006 .

Water accessibility to hydroxyls confined in solid wood cell walls

S. Piqueras, I. Burgert, E. E. Thybring, 2020, Cellulose.

Versatile strategies for the development of wood-based functional materials

Ingo Burgert, Marion Frey, Tobias Keplinger, 2018, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

A straightforward thiol-ene click reaction to modify lignocellulosic scaffolds in water

I. Burgert, V. Merk, John K. Berg, 2017 .

MECHANICAL RESISTANCE OF ACETYLATED AND DENSIFIED

I. Burgert, P. Hass, T. Keplinger, 2016 .

G-fibres in storage roots of Trifolium pratense (Fabaceae): tensile stress generators for contraction.

C. Neinhuis, I. Burgert, P. Fratzl, 2010, The Plant journal : for cell and molecular biology.

Plant Stems: Functional Design and Mechanics

Thomas Speck, Ingo Burgert, T. Speck, 2011 .

Porosity and Pore Size Distribution of Native and Delignified Beech Wood Determined by Mercury Intrusion Porosimetry

I. Burgert, Étienne Cabane, Jana S. Segmehl, 2019, Materials.

Inducing large deformation in wood cell walls by enzymatic modification

I. Burgert, N. Gierlinger, M. Eder, 2008 .

The role of material properties for the mechanical adaptation at branch junctions

Peter Fratzl, Ingo Burgert, Jürgen Goebbels, 2009, Trees.

Hydroxyl accessibility in wood by deuterium exchange and ATR-FTIR spectroscopy: methodological uncertainties

I. Burgert, E. E. Thybring, A. Tarmian, 2017, Wood Science and Technology.

Functionalized Cellulose Nanocrystals as Active Reinforcements for Light-Actuated 3D-Printed Structures

I. Burgert, Gustav Nyström, A. Arcifa, 2022, ACS nano.

Hydro-Actuated Plant Devices

I. Burgert, S. Turcaud, Khashayar Razghandi, 2015 .

Bio‐Inspired Superhydrophobic and Omniphobic Wood Surfaces

I. Burgert, Y. Romanyuk, P. Fuchs, 2017 .

Beech wood cross sections as natural templates to fabricate superhydrophobic surfaces

I. Burgert, Yaru Wang, S. Vitas, 2019, Wood Science and Technology.

Timber-mortar composites: The effect of sol-gel surface modification on the wood-adhesive interface

I. Burgert, P. Hass, V. Merk, 2018, Composite Structures.

A second life for wood residuals

I. Burgert, G. Panzarasa, 2022, Nature Sustainability.

A single touch can provide sufficient mechanical stimulation to trigger Venus flytrap closure

Jan T. Burri, Nino F. Läubli, H. Herrmann, 2020, PLoS biology.

The mechanical basis for snapping of the Venus flytrap, Darwin’s ‘most wonderful plant in the world’

Jan T. Burri, Nino F. Läubli, H. Herrmann, 2019, bioRxiv.

Micromechanis of cell walls

J. Dunlop, I. Burgert, 2011 .

A zoom into the nanoscale texture of secondary cell walls

I. Burgert, N. Gierlinger, M. Rüggeberg, 2014, Plant Methods.

Transcript and Metabolite Profiling for the Evaluation of Tobacco Tree and Poplar as Feedstock for the Bio-based Industry

Takayuki Tohge, Staffan Persson, John C. Bumstead, 2014, Journal of visualized experiments : JoVE.

Mechanical unfolding of a fluorescent protein enables self-reporting of damage in carbon-fibre-reinforced composites

I. Burgert, N. Bruns, S. Lörcher, 2014 .

Origami-like unfolding of hydro-actuated ice plant seed capsules.

Peter Fratzl, Ingo Burgert, Lorenzo Guiducci, 2011, Nature communications.

Wood Nanomaterials and Nanotechnologies

Liangbing Hu, Chaoji Chen, I. Burgert, 2021, Advanced materials.

Nano-mechanical characterization of the wood cell wall by AFM studies: comparison between AC- and QI™ mode

I. Burgert, T. Keplinger, Kirstin Casdorff, 2017, Plant Methods.

A close-up view of the wood cell wall ultrastructure and its mechanics at different cutting angles by atomic force microscopy

I. Burgert, M. Rüggeberg, T. Keplinger, 2018, Planta.

Roadmap on soft robotics: multifunctionality, adaptability and growth without borders

Robert L. Baines, C. Duriez, T. Nanayakkara, 2022, Multifunctional Materials.

Shaking table investigation of a low-cost and sustainable timber-based energy dissipation system with recentering ability

I. Burgert, B. Stojadinović, G. Panzarasa, 2022, Bulletin of Earthquake Engineering.

Hydro-actuation of ice plant seed capsules powered by water uptake

C. Neinhuis, J. Dunlop, I. Burgert, 2014 .

High-Resolution Adhesion Mapping of the Odd-Even Effect on a Layer-by-Layer Coated Biomaterial by Atomic-Force-Microscopy.

I. Burgert, S. Schön, Hervé Bellanger, 2017, ACS applied materials & interfaces.

Mechanical factors contributing to the Venus flytrap’s rate-dependent response to stimuli

Jan T. Burri, Nino F. Läubli, I. Burgert, 2021, Biomechanics and Modeling in Mechanobiology.

Kinematics Governing Mechanotransduction in the Sensory Hair of the Venus flytrap

Jan T. Burri, Nino F. Läubli, H. Herrmann, 2020, International journal of molecular sciences.

Stiffness gradients in vascular bundles of the palm Washingtonia robusta

Thomas Speck, Markus Rüggeberg, Ingo Burgert, 2008, Proceedings of the Royal Society B: Biological Sciences.

Generation of radial growth stresses in the big rays of konara oak trees

I. Burgert, H. Yamamoto, T. Okuyama, 2003, Journal of Wood Science.

Combined (In Situ) Methods

I. Burgert, M. Eder, 2010 .

Upscaling of wood bilayers: design principles for controlling shape change and increasing moisture change rate

I. Burgert, M. Rüggeberg, C. Vailati, 2017, Materials and Structures.

Frequency dependent mechanical properties of violin varnishes and their impact on vibro-mechanical tonewood properties

I. Burgert, M. Rüggeberg, F. Schwarze, 2020 .

CHITINASE-LIKE1/POM-POM1 and Its Homolog CTL2 Are Glucan-Interacting Proteins Important for Cellulose Biosynthesis in Arabidopsis[W][OA]

I. Burgert, C. Somerville, M. Hauser, 2012, Plant Cell.

Ectopic callose deposition into woody biomass modulates the nano-architecture of macrofibrils

Ari Pekka Mähönen, Oliver M. Terrett, Jan J. Lyczakowski, 2023, Nature Plants.

Exploring the micromechanical design of plant cell walls.

I. Burgert, 2006, American journal of botany.

Fibre-matrix interfaces in plants as model systems for technical composites

Thomas Speck, Ingo Burgert, T. Speck, 2007 .

Photoresponsive Movement in 3D Printed Cellulose Nanocomposites.

I. Burgert, A. Neels, Gustav Nyström, 2022, ACS Applied Materials and Interfaces.

Anisotropic wood-hydrogel composites: Extending mechanical properties of wood towards soft materials’ applications

Cécile M. Bidan, I. Burgert, P. Fratzl, 2023, Materials Today Bio.

G-fibres in storage roots of Trifolium pratense (Fabaceae): tensile stress generators for contraction.

C. Neinhuis, I. Burgert, P. Fratzl, 2010, The Plant journal : for cell and molecular biology.

Is there a coherence between the radial and axial strength of living trees

I. Burgert, D. Eckstein, E. Schwab, 1998 .

Hybrid wood materials with magnetic anisotropy dictated by the hierarchical cell structure.

I. Burgert, N. Gierlinger, A. Hirt, 2014, ACS applied materials & interfaces.

Origami-like unfolding of hydro-actuated ice plant seed capsules.

Matthew J. Harrington, C. Neinhuis, J. Dunlop, 2011, Nature communications.