Lars Mattsson

发表

Metrology of 3D microstructures : a demanding task with surprising results

Lars Mattsson, 2007 .

Localizing micro-defects on rough metal surfaces

Lars Mattsson, Attila Temun, Irma Heikkilä, 2006 .

Fast and accurate metrology of multi-layered ceramic materials by an automated boundary detection algorithm developed for optical coherence tomography data.

Ernest W Chang, Lars Mattsson, Peter Ekberg, 2014, Journal of the Optical Society of America. A, Optics, image science, and vision.

A new general approach for solving the self-calibration problem on large area 2D ultra-precision coordinate measurement machines

Lars Mattsson, Peter Ekberg, Lars Stiblert, 2014 .

ASTOR: an autostereoscopic optical see-through augmented reality system

Alex Olwal, Lars Mattsson, Torsten Kjellberg, 2005, Fourth IEEE and ACM International Symposium on Mixed and Augmented Reality (ISMAR'05).

Accurate and automated image segmentation of 3D optical coherence tomography data suffering from low signal-to-noise levels.

Michael Leitner, Lars Mattsson, Peter Ekberg, 2014, Journal of the Optical Society of America. A, Optics, image science, and vision.

Model based in-process monitoring with optical coherence tomography

Rong Su, Mikael Hedlind, Lars Mattsson, 2012 .

Performance Evaluation of Micro Milling Installations

Lars Mattsson, Peter Ekberg, Bita Daemi, 2013 .

Launching the VASCO citizen science project

Mikael Laaksoharju, Enrique Solano, Lars Mattsson, 2020 .

Optical coherence tomography : a potential tool for roughness assessment of free and embedded surfaces of laser-machined alumina ceramic

Rong Su, Lars Mattsson, Dominik Jurków, 2011 .

A Theoretical and Practical Approach to Geometrical Part Assurance

Lars Mattsson, Richard Lindqvist, Karl-Johan Karlsson, 2016 .

Hybrid Tooling Technologies and Standardization for the Manufacturing of Inserts for Micro Injection Molding

L. Staemmler, Guido Tosello, Andreas Schoth, 2007 .

DEVELOPMENT OF A LOW-COST VISION SYSTEM FOR FINDING CONTOUR AND SURFACE DEFECTS ON CAST IRON ENGINE COMPONENTS Master of Science Thesis in the Master Degree Programme Production Engineering and Management

Anders Berglund, Lars Mattsson, Peter Ekberg, 2014 .

4M network of excellence, progress report 2006-2008

Giuliano Bissacco, Hans Nørgaard Hansen, Guido Tosello, 2007 .

Quality assurance and metrology

Lars Mattsson, Volker Schulze, Johannes Schneider, 2009 .

Experiences and challenges in Multi Material Micro Metrology

Lars Mattsson, 2007 .

Repeatability analysis of two methods for height measurements in the micrometer range

Stefan Simeonov Dimov, Emmanuel Bruno Jean Paul Brousseau, Lars Mattsson, 2006 .

Optical measurement of waviness on specular surfaces by Fringe Reflection Technique, FRT

Lars Mattsson, Bita Daemi, 2012 .

4M Network of Excellence, Progress Report 2009

Emmanuel Bruno Jean Paul Brousseau, Stefan Simeonov Dimov, Andreas Schoth, 2009 .

The Challenge of Dimensional Metrology on High Aspect Ratio Micro Structures

Lars Mattsson, 2007 .

Equipp - Exchange of quality measurement process plans

Lars Mattsson, Richard Lindqvist, John A. Horst, 2010 .

Reliability of surface roughness measurements of micro features - experiences of a round robin test with nine 4M laboratories

Emmanuel Bruno Jean Paul Brousseau, Guido Tosello, Andreas Schoth, 2008 .

Z-correction, a method for achieving ultraprecise self-calibration on large area coordinate measurement machines for photomasks

Lars Mattsson, Peter Ekberg, Lars Stiblert, 2014 .

Metrology of micro-components – a real challenge for the future

Lars Mattsson, 2006 .

Application of different process chains for polymer microfluidics fabrication including hybrid tooling technologies, standardization and replication : a benchmark investigation within 4M Polymer Division

L. Staemmler, Guido Tosello, Andreas Schoth, 2007 .

Fast low-cost fiber-optic displacement sensor

Torgny E. Carlsson, Lars Mattsson, Attila Temun, 2005, International Conference on Optical Fibre Sensors.

Geometry assurance and quality control planning by QAM

Lars Mattsson, Richard Lindqvist, Karl-Johan Karlsson, 2010 .

Computerization of manufacturing planning and control systems: Minicomputer-based systems 1980-1987

Birger Rapp, Jan Olhager, Lars Mattsson, 1989 .

Anisotropic scatter behaviour of fiber-containing surfaces analyzed by 3D-BRDF measurements and simulations

Lars Mattsson, Hjalmar Granberg, Jon Jensen, 2002, SPIE Optics + Photonics.

Lateral performance evaluation of laser micromachining by high precision optical metrology and image analysis

Lars Mattsson, Peter Ekberg, Bita Daemi, 2017 .

Interface för kommunikation mellan styrsystemsenheter över Ethernet och TCP/IP

Lars Mattsson, 2002 .

Advanced image analysis verifies geometry performance of micro-milling systems.

Lars Mattsson, Peter Ekberg, Bita Daemi, 2017, Applied optics.

Assessment of digital cameras for micro-structural sensing of low contrast surface features

Lars Mattsson, Attila Temun, 2005 .

Performance evaluation of a micro screen printing installation

Lars Mattsson, Bita Daemi, 2017 .

Large-format 3D interaction table

Lars Mattsson, Torsten Kjellberg, Jonny Gustafsson, 2005, IS&T/SPIE Electronic Imaging.

Scattering signatures of isolated surface features

Lars Mattsson, Mans Bjuggren, Joakim P. Ingers, 1993, Optics & Photonics.

Instrument For Angle-Resolved Measurement Of Scattered Light In The VUV-Visible Wavelength Region

Lars Mattsson, 1985, Photonics West - Lasers and Applications in Science and Engineering.

An information-model approach for systematic and holistic geometrical inspection and control planning (GICP)

Peter Lindahl, Lars Mattsson, Richard Lindqvist, 2009 .

Performance Evaluation of Laser Micro-Machining Installations

Lars Mattsson, Bita Daemi, 2013 .

Clustering and dynamic decoupling of dust grains in turbulent molecular clouds

Lars Mattsson, Beatriz Villarroel, Akshay Bhatnagar, 2018, Monthly Notices of the Royal Astronomical Society.