C. Koch

发表

Application of fractal geometry measurements to the evaluation of fracture toughness of brittle intermetallics

J. Russ, Y. Fahmy, C. Koch, 1991 .

Influence of Additives and Pulse Electrodeposition Parameters on Production of Nanocrystalline Zinc from Zinc Chloride Electrolytes

C. Koch, P. Fedkiw, K. Youssef, 2004 .

Optimization of strength and ductility in nanocrystalline and ultrafine grained metals

C. Koch, 2003 .

Evaluation of mechanical properties using shear–punch testing

Ronald O. Scattergood, Korukonda L. Murty, R. Kishore, 2005 .

Algorithms for design optimization of chemistry of hard magnetic alloys using experimental data

C. Poloni, C. Koch, I. Egorov, 2016 .

High-energy mechanical milling of poly(methyl methacrylate), polyisoprene and poly(ethylene-alt-propylene)

A. P. Smith, C. Koch, H. Ade, 2000 .

Effect of stacking fault energy on mechanical properties and strengthening mechanisms of brasses processed by cryorolling

C. Koch, S. Dasharath, Suhrit Mula, 2015 .

Enhancement of mechanical properties of low stacking fault energy brass processed by cryorolling followed by short-annealing

C. Koch, Ravi Kumar, S. Dasharath, 2015 .

Isolation techniques and electrical characterization of single grain boundaries of Bi2Sr2CaCu2O2 high-temperature superconductor

A. Kingon, C. Koch, D. Haase, 1998 .

Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys

R. Scattergood, C. Koch, J. Eckert, 2011 .

Self-assembled three-dimensional Cu–Ge nanoweb composite

Gerd Duscher, D. Leonard, G. Duscher, 2008, Nanotechnology.

Mechanical Hardness as a Probe of Nanocrystalline Materials

C. Koch, T. Shen, T. Malow, 1994 .

Creep in nanocrystalline materials: Role of stress assisted grain growth

R. Scattergood, C. Koch, I. Charit, 2010 .

Understanding creep in nanocrystalline materials

R. Scattergood, C. Koch, I. Charit, 2010 .

Creep behavior of ultra-fine grained Zn–4.5Al

F. Goodwin, R. Scattergood, C. Koch, 2010 .

Synergistic effect of Nb and Zr addition in thermal stabilization of nano-crystalline Cu synthesized by ball milling

C. Koch, Sandip Chakraborty, A. Basu Mallick, 2020 .

Thermal stability of nanocrystalline nickel with yttrium additions

Mark A. Atwater, R. Scattergood, C. Koch, 2013 .

The thermal stability of nanocrystalline copper cryogenically milled with tungsten

Mark A. Atwater, R. Scattergood, C. Koch, 2012 .

Consolidation of a Cu–2.5 vol.% Al2O3 powder using high energy mechanical milling

R. Scattergood, C. Koch, K. Youssef, 2005 .

Amorphization reactions during mechanical alloying/milling of metallic powders

C. Koch, 1990 .

Amorphization by mechanical alloying

C. Koch, 1990 .

Achieving Gradient Martensite Structure and Enhanced Mechanical Properties in a Metastable β Titanium Alloy

C. Koch, Yuntian Zhu, Fuguo Li, 2019, Metallurgical and Materials Transactions A.

Mechanical behavior of nanocrystalline copper

R. Scattergood, C. Koch, K. Murty, 2007 .

High-temperature ordered intermetallic alloys II; Proceedings of the Second Symposium, Boston, MA, Dec. 2-4, 1986

C. Koch, C. Liu, N. Stoloff, 1987 .

First principles exploration of near-equiatomic NiFeCrCo high entropy alloys

C. Koch, C. Niu, D. Irving, 2016 .

Spin-driven ordering of Cr in the equiatomic high entropy alloy NiFeCrCo

C. Koch, C. Niu, X. Sang, 2015 .

Intermetallic matrix composites prepared by mechanical alloying—a review

C. Koch, 1998 .

Oxidation protection of carbon fibers by a reaction sintered nanostructured SiC coating

C. Koch, Bing Zhang, Guo-qin Chen, 2011 .

On the elastic moduli of nanocrystalline Fe, Cu, Ni, and Cu–Ni alloys prepared by mechanical milling/alloying

G. Pharr, C. Koch, T. Tsui, 1995 .

Strong and ductile nanostructured Cu-carbon nanotube composite

C. Koch, Z. Horita, Yuntian Zhu, 2009 .

Nanostructure formation mechanism during in-situ consolidation of copper by room-temperature ball milling

C. Koch, J. Eckert, S. Scudino, 2015 .

Effect of Nano-Oxide Particle Size on Radiation Resistance of Iron-Chromium Alloys

R. Scattergood, C. Koch, Yuntian Zhu, 2016 .

BRI) Direct and Inverse Design Optimization of Magnetic Alloys with Minimized Use of Rare Earth Elements

C. Koch, G. Dulikravich, J. Schwartz, 2016 .

Superconductivity in the technetium-titanium alloy system

C. Koch, 1976 .

Evidence for Microstructural Effects Under Strain in Bronze Process Nb3Sn

C. Koch, A. DasGupta, D. Easton, 1980 .

Flux pinning by small perturbations in the superconducting order parameter in type-II superconductors

C. Koch, Y. Chou, A. DasGupta, 1980 .

The effect of strain upon the scaling law for flux pinning in bronze process Nb3Sn

C. Koch, A. DasGupta, D. Easton, 1980 .

The peak effect, summation problem, and magnetic history in a superconducting Nb-38 at.% Hf alloy

C. Koch, A. DasGupta, D. Kroeger, 1979 .

Effect of oxygen content on thermal stability of grain size for nanocrystalline Fe10Cr and Fe14Cr4Hf alloy powders

R. Scattergood, C. Koch, S. Shahbazmohamadi, 2017 .

Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys

R. Scattergood, C. Koch, M. Sakaliyska, 2011 .

The influence of mill energy and temperature on the structure of the TiNi intermetallic after mechanical attrition

C. Koch, Kenjiro Yamada, 1993 .

Thermal Stability of Nanocrystalline Materials

C. Koch, T. Malow, 1996 .

Bimodal grain size distribution: an effective approach for improving the mechanical and corrosion properties of Fe–Cr–Ni alloys

C. Koch, R. Raman, B. Mahesh, 2012, Journal of Materials Science.

Resistance of nanocrystalline vis-à-vis microcrystalline Fe–Cr alloys to environmental degradation and challenges to their synthesis

C. Koch, R. Gupta, R. Raman, 2010 .

The effects of excess CuO on the grain growth kinetics, sintering and microstructure of the YBa2Cu3O7_δ superconductor

A. Kingon, C. Koch, M. Shin, 1992 .

Flux pinning by grain boundaries in niobium bicrystals

C. Koch, Y. Chou, A. DasGupta, 1978 .

How Effectively can Grain Boundaries Pin Flux Lines

C. Koch, Y. Chou, A. DasGupta, 1978 .

X-ray microscopy of novel thermoplastic/liquid crystalline polymer blends by mechanical alloying

C. Koch, H. Ade, R. Spontak, 1998 .

Flux Pinning by Grain Boundaries in Superconducting Niobium-Zirconium Alloys

C. Koch, G. Love, 1969 .

A comparison of methods for measuring flux gradients in type II superconductors

C. Koch, D. Kroeger, J. Charlesworth, 1975 .

Formation of Bi2Sr2CaCu2Ox/Ag multifilamentary metallic precursor powder-in-tube wires

C. Koch, Yun Zhang, J. Schwartz, 2016 .

Nano ZrO2 particles in nanocrystalline Fe–14Cr–1.5Zr Alloy Powders

R. Scattergood, C. Koch, Yuntian Zhu, 2014 .

Effect of Nb addition on Fe-7Cr-Nb and Fe-15Cr-Nb metastable alloy formation and their thermal stability

C. Koch, Suhrit Mula, V. M. Suntharavel Muthaiah, 2018, Materials Research Express.

Electrochemical characteristics of nano and microcrystalline Fe–Cr alloys

R. K. Singh Raman, C. Koch, R. S. Singh Raman, 2012, Journal of Materials Science.

Structural disorder and phase transformation in graphite produced by ball milling

W. Q. Ge, C. Koch, T. Shen, 1996 .

A predictive model for thermodynamic stability of grain size in nanocrystalline ternary alloys

R. Scattergood, C. Koch, M. Saber, 2013 .

High strength, ductility, and electrical conductivity of in-situ consolidated nanocrystalline Cu-1%Nb

R. Scattergood, C. Koch, K. Youssef, 2018 .

Thermal Stability of Nanocrystalline Copper Alloyed with Antimony

Mark A. Atwater, R. Scattergood, C. Koch, 2013, Metallurgical and Materials Transactions. A.

Modulated oscillatory hardening and dynamic recrystallization in cryomilled nanocrystalline Zn

R. Scattergood, C. Koch, J. Narayan, 2002 .

Multi-objective design and optimization of hard magnetic alloys free of rare earths

C. Poloni, C. Koch, I. Egorov, 2015 .

Deformation twinning in a nanocrystalline hcp Mg alloy

C. Koch, Xiaolei Wu, Yuntian Zhu, 2011 .

Mechanical properties of nanocrystalline Fe–Pb and Fe–Al2O3

R. Scattergood, C. Koch, K. Murty, 2006 .

Breakthroughs in Optimization of Mechanical Properties of Nanostructured Metals and Alloys

R. Scattergood, C. Koch, K. Youssef, 2005 .

Microstructural evolution in mechanically alloyed Nb-25 at.% Ge

C. Koch, M. Kim, E. Kenik, 1986 .

High-temperature grain size stabilization of nanocrystalline Fe-Cr alloys with Hf additions

R. Scattergood, C. Koch, Yuntian Zhu, 2014 .

Thermodynamic stabilization of nanocrystalline binary alloys

R. Scattergood, C. Koch, M. Saber, 2013 .

Stabilized nanocrystalline iron-based alloys: Guiding efforts in alloy selection

R. Scattergood, C. Koch, K. Darling, 2011 .

Thermal stability of nanocrystalline Pd81Zr19

R. Scattergood, C. Koch, Brady G. Butler, 2010 .

Thermal stability of nanocrystalline Fe–Zr alloys

R. Scattergood, C. Koch, K. Darling, 2010 .

The structure and property characteristics of amorphous/nanocrystalline silicon produced by ball milling

C. Koch, R. Nemanich, J. Huang, 1995 .

The thermal stability of high-energy ball-milled nanostructured Cu

R. Scattergood, C. Koch, J. Tao, 2013 .

Mechanical Properties of Nanocrystalline Cu and Cu-Zn Using Tensile and Shear Punch Tests

R. Scattergood, C. Koch, J. Tao, 2009 .

Cryogenic reciprocating torsion induced nanoscale precipitation in aluminum wire with exceptional strength and electrical conductivity

C. Koch, J. Si, S. Liu, 2022, Materials Science and Engineering: A.

Possible evidence for the stabilization of β–carbon nitride by high-energy ball milling

Y. Fahmy, C. Koch, T. Shen, 1999 .

Microstructures and Stabilization Mechanisms of Nanocrystalline Iron-Chromium Alloys with Hafnium Addition

R. Scattergood, C. Koch, Yuntian Zhu, 2015, Metallurgical and Materials Transactions A.

Nanostructured materials by mechanical alloying: new results on property enhancement

R. Scattergood, C. Koch, Yuntian Zhu, 2010 .

Feasibility of formation of nanocrystalline Fe-Cr-Y alloys: Mechanical properties and thermal stability

C. Koch, Suhrit Mula, V. Muthaiah, 2016 .

Structural evolution of Cu(1−X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties

R. Scattergood, C. Koch, K. Youssef, 2015 .

Thermal stability of nanocrystalline Fe–Cr alloys with Zr additions

R. Scattergood, C. Koch, M. Saber, 2012 .

Thermodynamic feasibility of solid solubility extension of Nb in Cu and their thermal stability

Mark A. Atwater, R. Scattergood, C. Koch, 2012 .

Mechanical milling/alloying of intermetallics

C. Koch, J. Whittenberger, 1996 .

Synthesis of nanostructured materials by mechanical milling: problems and opportunities

C. Koch, Carl C. Koch, 1997 .

Mechanical properties and electrical conductivity of Cu–Cr and Cu–Cr–4% SiC nanocomposites for thermo-electric applications

C. Koch, S. K. Pratihar, Suhrit Mula, 2011 .

THE BULK NANOCRYSTALLINE ZN PRODUCED BY MECHANICAL ATTRITION

T. L. Chan, C. J. Li, C. Koch, 2009 .

Evolution of microstructure and mechanical properties of in situ consolidated bulk ultra-fine-grained and nanocrystalline Zn prepared by ball milling

R. Scattergood, C. Koch, J. Narayan, 2003 .

Mechanical properties of cyromilled nanocrystalline Zn studied by the miniaturized disk bend test

R. Scattergood, C. Koch, J. Narayan, 2002 .

The Influence of Dislocation Structure on Formation of Nanocrystals by Mechanical Attrition

C. Koch, T. Shen, 1995 .

The hall-petch relationship in nanocrystalline iron produced by ball milling

C. Koch, J.S.C. Jang, J. Jang, 1990 .

The hall-petch relationships in mechanically alloyed Ni3Al with oxide dispersoids

C. Koch, J. S. Jang, J. Jang, 1988 .

Nanocomposite Bi(Sb)Te(Se) Materials by Cryogenic Mechanical Alloying and Optimized High Pressure Hot-pressing

C. Koch, R. Venkatasubramanian, J. Lebeau, 2012 .

A review of mechanical behaviour and stress effects in hard superconductors

C. Koch, D. Easton, 1977 .

Structure and magnetic properties of a multi-principal element Ni–Fe–Cr–Co–Zn–Mn alloy

C. Koch, C. Niu, C. Niu, 2016 .

Deuterated phospholipids as Raman spectroscopic probes of membrane structure. Phase diagrams for the dipalmitoyl phosphatidylcholine(and its d62 derivative)-dipalmitoyl phosphatidylethanolamine system.

C. Koch, R. Mendelsohn, 1980, Biochimica et biophysica acta.

Dynamic Void Growth and Shrinkage in Mg under Electron Irradiation

C. Koch, G. Cheng, P. Millett, 2014 .

High-temperature ordered intermetallic alloys

C. T. Liu, C. Koch, C. Liu, 1985 .

Thermodynamic Grain Size Stabilization Models: An Overview

R. Scattergood, C. Koch, M. Saber, 2015 .

Influence of Zr and nano-Y2O3 additions on thermal stability and improved hardness in mechanically alloyed Fe base ferritic alloys

R. Scattergood, C. Koch, K. Darling, 2014 .

Effect of zirconium on grain growth and mechanical properties of a ball-milled nanocrystalline FeNi alloy

R. Scattergood, C. Koch, K. Darling, 2013 .

Mechanical properties of nanocrystalline and epitaxial TiN films on (100) silicon

A. K. Sharma, C. Koch, J. Narayan, 2001 .

Nanostructure Science and Technology

Mihail C. Roco, Richard W. Siegel, David T. Shaw, 1999 .

The synthesis and structure of nanocrystalline materials produced by mechanical attrition: A review

C. Koch, Carl C. Koch, 1993 .

Structural nanocrystalline materials: an overview

C. Koch, Carl C. Koch, 2007 .

Structural Nanocrystalline Materials: Fundamentals and Applications

C. Koch, I. Ovid’ko, S. Seal, 2007 .

Nanocrystalline Al–Mg alloy with ultrahigh strength and good ductility

R. Scattergood, C. Koch, K. Murty, 2006 .

Ultrahigh strength and high ductility of bulk nanocrystalline copper

Ronald O. Scattergood, R. Scattergood, C. Koch, 2005 .

The role of new particle surfaces in synthesizing bulk nanostructured metallic materials by powder metallurgy

R. Scattergood, C. Koch, Deliang Zhang, 2009 .

Improved corrosion behavior of nanocrystalline zinc produced by pulse-current electrodeposition

C. Koch, P. Fedkiw, K. Youssef, 2004 .

Origins of stored enthalpy in cryomilled nanocrystalline Zn

C. Koch, J. Narayan, Xinghang Zhang, 2001 .

Formation of amorphous alloys by the mechanical alloying of crystalline powders of pure metals and powders of intermetallics

C. Koch, R. Schwarz, 1986 .

Structural changes in B2 CoZr compound during amorphization process by mechanical milling

C. Koch, Suzuki Kenji, T. Nasu, 1994 .

Tensile Properties of Superconducting Composite Conductors and Nb-Ti Alloys at 4.2°K

C. Koch, D. Easton, 1975 .

Boron segregation at grain boundaries in rapidly solidified Ni3Al

C. L. White, C. Koch, C. Liu, 1985 .

High-temperature ordered intermetallic alloys

C. Koch, C. Liu, N. Stoloff, 1985 .

A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures

Douglas L. Irving, C. Koch, C. Niu, 2015 .

Strong and weak-link behavior of single grain boundaries in melt textured bulk Ag doped YBa2Cu3O7−δ

A. Kingon, C. Koch, A. Goyal, 1995 .

Synthesis of Bi2Sr2CaCu2Ox superconductors via direct oxidation of metallic precursors

C. Koch, Yun Zhang, J. Schwartz, 2014 .

Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy

Douglas L. Irving, C. Koch, C. Niu, 2013 .

The Inverse Hall-Petch Effect—Fact or Artifact?

C. Koch, J. Narayan, 2000 .

Some properties of electron beam evaporated amorphous Mo-N films

C. Koch, D. Easton, O. Cavin, 1983 .

Materials Synthesis by Mechanical Alloying

C. Koch, Carl C. Koch, 1989 .

Pulse current electrodeposition of nanocrystalline zinc

C. Koch, P. Fedkiw, K. Saber, 2003 .

Solid solution intra-rare-earth alloys: A review of alloying behavior and structure

C. Koch, 1970 .

The influence of plastic deformation on the f.c.c.d.h.c.p. transformation in cerium

C. Koch, C. McHargue, 1968 .

Ultratough nanocrystalline copper with a narrow grain size distribution

R. Scattergood, C. Koch, K. Murty, 2004 .

Ductility in Nanostructured and Ultra Fine-Grained Materials: Recent Evidence for Optimism

C. Koch, 2002 .

A modified model for hall-petch behavior in nanocrystalline materials

R. Scattergood, C. Koch, 1992 .

Preparation of ‘‘amorphous’’ Ni60Nb40 by mechanical alloying

C. Koch, O. Cavin, C. C. Koch, 1983 .

Mechanical alloying of brittle materials

C. Koch, R. Davis, B. McDermott, 1988 .

Structural development during mechanical alloying of crystalline niobium and tin powders

C. Koch, M. Kim, 1987 .

Mechanical alloying of brittle components: Silicon and germanium

C. Koch, R. Davis, 1987 .

Melting and possible amorphization of Sn and Pb in Ge/Sn and Ge/Pb mechanically milled powders

C. Koch, J. S. Jang, J. Jang, 1990 .

On the single phase fcc solid solution in nanocrystalline Cr-Nb-Ti-V-Zn high-entropy alloy

C. Koch, K. V. Rajulapati, Akanksha Dwivedi, 2016 .

High hardness in a nanocrystalline Mg97Y2Zn1 alloy

C. Koch, Xiaozhou Liao, Yuntian Zhu, 2011 .

Amorphization of single composition powders by mechanical milling

C. Koch, 1996 .

High temperature stabilization of nanocrystalline grain size: Thermodynamic versus kinetic strategies

R. Scattergood, C. Koch, M. Saber, 2013 .

Studies of deformation mechanisms in ultra-fine-grained and nanostructured Zn

R. Scattergood, C. Koch, A. Sergueeva, 2002 .

Tensile elongation (110%) observed in ultrafine-grained Zn at room temperature

R. Scattergood, C. Koch, A. Sergueeva, 2002 .

Bulk Behavior of Nanostructured Materials

C. Koch, 1999 .

Amorphization and disordering of the Ni_3Al ordered intermetallic by mechanical milling

C. Koch, J. S. Jang, J. Jang, 1990 .

Preparation of beta brass by mechanical alloying of elemental copper and zinc

C. Koch, B. McDermott, 1986 .

Research on Metastable Structures Using High Energy Ball Milling at North Carolina State University ( Overview )

C. Koch, 1995 .

Nanostructured Materials: Processing, Properties and Applications

C. Koch, Carl C. Koch, 2006 .

Rapid solidification of intermetallic compounds

C. Koch, 1988 .

X-ray intensity decrease from absorption effects in mechanically milled systems

C. Koch, R. Leonard, 1997 .

EXAFS study on mechanically alloyed Fe-B powder mixtures

C. Koch, D. Sayers, T. Nasu, 1996 .

Structural Changes in Fe–B Powder Mixtures during Amorphization Process by Mechanical Alloying

C. Koch, D. Sayers, Kenji Suzuki, 1995 .

Amorphization by mechanical alloying: the role of mixtures of intermetallics

C. Koch, J. S. Jang, Pee-Yew Lee, 1988 .

Evaluation of mechanical properties of partially amorphous and nanocrystalline Al50Ti40Si10 composites prepared by mechanical alloying and hot isostatic pressing

R. Scattergood, C. Koch, I. Manna, 2012 .

Formation of amorphous Ni‐Zr alloys by mechanical alloying of mixtures of the intermetallic compounds Ni11Zr9 and NiZr2

C. Koch, Pee-Yew Lee, 1987 .

The oxidation of Ni3Si-base alloys

C. Koch, C. Liu, N. Sukidi, 1995 .

Materials Research Society Symposium Proceedings Held in Boston, Massachusetts on 29 November-1 December 1988. Volume 133. High-Temperature Ordered Intermetallic Alloys III

P. C. Clapp, C. Koch, C. Liu, 1988 .

Materials Research Society Symposia Proceedings. Volume 39. High- Temperature Ordered Intermetallic Alloys Held on November 26-28, 1984 at Boston, Massachusetts,

C. Koch, C. Liu, N. Stoloff, 1985 .

Effect of Interstitials on the Phase Stability of Selected Intermetallics

C. Koch, M. Kassem, 1990 .

The effects of interstitial elements on the phase stability and mechanical behavior of selected intermetallics

Y. Fahmy, C. Koch, C. Benfield, 1993 .

On annealing, long range order and superconducting transition temperature in the V3Ga A-15 compound*

C. Koch, 1973 .

Superconducting transition temperatures of chemically vapour-deposited tungsten-rhenium alloys

C. Koch, D. Easton, D. Kroeger, 1974 .

A low temperature X-ray investigation of technetium and the TcMo A-15 compound

C. Koch, J. Marples, 1972 .

Experimental evidence for magnetic or electric field effects on phase transformations

C. Koch, 2000 .

Mechanical Milling and Alloying

C. Koch, 2006 .

Nanocrystalline high-entropy alloys

C. Koch, 2017 .

Stabilization of nanocrystalline grain sizes by solute additions

R. Scattergood, C. Koch, K. Darling, 2008, Journal of Materials Science.

Bulk Nanostructured Materials

C. Koch, E. Lavernia, T. Langdon, 2017, Metallurgical and Materials Transactions A.

The stabilization of nanocrystalline copper by zirconium

Mark A. Atwater, R. Scattergood, C. Koch, 2013 .

The thermal stability of nanocrystalline cartridge brass and the effect of zirconium additions

Mark A. Atwater, R. Scattergood, C. Koch, 2012, Journal of Materials Science.

Nanocrystalline materials – Current research and future directions

C. Koch, C. Suryanarayana, 2000 .

Mechanical behavior of bulk nanocrystalline copper alloys produced by high energy ball milling

R. Scattergood, C. Koch, K. Youssef, 2011 .

Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy

B. S. Murty, R. K. Singh Raman, K. R. Ravi, 2011, Journal of Materials Science.

Ultrastrong Mg Alloy via Nano-spaced Stacking Faults

C. Koch, Y. Zhu, G. Cheng, 2013 .

Shear punch tests for a bulk metallic glass

A. Shih, R. Scattergood, C. Koch, 2006 .

Physics and model of strengthening by parallel stacking faults

C. Koch, G. Cheng, S. Mathaudhu, 2013 .

Tuning heterostructures with powder metallurgy for high synergistic strengthening and hetero-deformation induced hardening

C. Koch, Yuntian Zhu, P. Jiang, 2020 .

Workability and mechanical properties of ultrasonically cast Al–Al2O3 nanocomposites

Sudipto Ghosh, Shyamal Kumar Pabi, Suhrit Mula, 2012 .

Mechanical milling of ordered intermetallic compounds: the role of defects in amorphization

Y. S. Cho, C. Koch, 1993 .

Amorphization by mechanical attrition in the NbGe system: Extension of the amorphous composition range

C. Koch, Yoonsung Cho, 1993 .

Synthesis and characterization of an in situ consolidated nanocrystalline Cu88Al11.5Y0.5 alloy

R. Scattergood, C. Koch, K. Sikdar, 2017 .

Grain size stabilization and strengthening of cryomilled nanostructured Cu 12 at% Al alloy

C. Koch, K. Sikdar, D. Roy, 2017 .

Influence of pulse plating parameters on the synthesis and preferred orientation of nanocrystalline zinc from zinc sulfate electrolytes

C. Koch, P. Fedkiw, K. Youssef, 2008 .

Dispersoids in Intermetallic Alloys: a Review

C. Koch, 1986 .

Size effect of primary Y2O3 additions on the characteristics of the nanostructured ferritic ODS alloys: Comparing as-milled and as-milled/annealed alloys using S/TEM

R. Scattergood, C. Koch, Yuntian Zhu, 2014 .

A study of cooling rates during metallic glass formation in a hammer and anvil apparatus

C. Koch, D. Easton, D. Kroeger, 1982 .

Formation, solid solution hardening and softening of nanocrystalline solid solutions prepared by mechanical attrition

C. Koch, T. Shen, 1996 .

Mechanical properties in tension of mechanically attrited nanocrystalline iron by the use of the miniaturized disk bend test

C. Koch, T. Malow, 1998 .

Structural investigation of vacuum sintered Cu–Cr and Cu–Cr–4% SiC nanocomposites prepared by mechanical alloying

P. K. Roy, C. Koch, Suhrit Mula, 2011 .

Rapid solidification of intermetallic compounds

C. Koch, 1988 .

Effect of B on the thermal stabilization of cryomilled nanocrystalline Cu–Al alloy

Mark A. Atwater, C. Koch, K. Sikdar, 2019, Materialia.

Thermal stability and mechanical properties of Fe-Cr-Zr alloys developed by mechanical alloying followed by spark plasma sintering

C. Koch, Suhrit Mula, V. Muthaiah, 2021, Journal of Alloys and Compounds.

Nanocrystalline Materials: Mechanical Properties

C. Koch, K. V. Rajulapati, 2014 .

Grain-size stabilization in nanocrystalline FeZr alloys

R. Scattergood, C. Koch, K. Darling, 2008 .

High-temperature ordered intermetallic alloys; Proceedings of the Symposium, Boston, MA, November 26-28, 1984

C. Koch, C. Liu, N. Stoloff, 1985 .

The glass transition temperature in amorphous CU1−xZrx alloys synthesized by mechanical alloying/milling

C. Koch, J. S. Jang, J. Jang, 1989 .

The Synthesis of Non-Equilibrium Structures by Ball-Milling

C. Koch, 1992 .

Ductility of Nanostructured Materials

D. G. Morris, C. C. Koch, C. Koch, 1999 .

Grain growth in nanocrystalline iron prepared by mechanical attrition

C. Koch, T. Malow, 1997 .

Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests

R. Scattergood, C. Koch, K. Murty, 2007 .

Tensile properties of in situ consolidated nanocrystalline Cu

Evan Ma, C. Koch, S. Cheng, 2005 .

The mechanical behavior of multiphase nanocrystalline materials

R. Scattergood, C. Koch, K. Murty, 2007 .

Nanocrystals by high energy ball milling

Y. S. Cho, C. Koch, 1992 .

Formation and hardening effects in nanocrystalline TiN alloys prepared by mechanical alloying

C. Koch, T. Shen, 1995 .

Deformation twins and related softening behavior in nanocrystalline Cu–30% Zn alloy

Mark A. Atwater, R. Scattergood, C. Koch, 2012 .

Mechanical behavior of bulk ultra-fine-grained Zn–Al die-casting alloys

F. Goodwin, R. Scattergood, C. Koch, 2009 .

An EXAFS study of structural changes induced by mechanical milling of the Ni3Al ordered intermetallic compound

C. Koch, D. Sayers, T. Nasu, 1992 .

Nanoscale composites of Si/Sn and Ge/Sn synthesized by mechanical attrition

C. Koch, R. Leonard, 1992 .

A Mössbauer spectroscopy study of nanoscale Ge–Sn dispersions prepared by ball milling

P. Boolchand, C. Koch, 1992 .

Model for melting enthalpy of Sn in Ge–Sn composites

C. Koch, D. Turnbull, J. S. Jang, 1990 .

The melting point depression of tin in mechanically milled tin and germanium powder mixtures

C. Koch, J. S. Jang, S. S. Gross, 1989 .

Formation of amorphous Ni-Zr alloy powder by mechanical alloying of intermetallic powder mixtures and mixtures of nickel or zirconium with intermetallics

C. Koch, Pee-Yew Lee, 1988 .

The formation and thermal stability of amorphous Ni-Nb alloy powder synthesized by mechanical alloying

C. Koch, Pee-Yew Lee, 1987 .

Solid-state reaction in nanocrystalline Fe/SiC composites prepared by mechanical alloying

C. Koch, T. Shen, M. Quan, 1997 .

Effect of microwave sintering over vacuum and conventional sintering of Cu based nanocomposites

C. Koch, Jagannath Panigrahi, Suhrit Mula, 2014 .

Compressive mechanical behavior of nanocrystalline Fe investigated with an automated ball indentation technique

C. Koch, K. Murty, P. Miraglia, 1998 .

Effect of annealing on the structure of an amorphous (Mo/sub 0. 6/Ru/sub 0. 4/)/sub 82/B/sub 18/ alloy alloy

W. Johnson, C. Koch, D. Kroeger, 1983 .

Nanostructured Materials: Processing Properties, and Potential Applications

C. Koch, Carl C. Koch, 2002 .

Evidence for the formation mechanism of nanoscale microstructures in cryomilled Zn powder

Hao Wang, C. Koch, J. Narayan, 2001 .

Nanostructured Materials: Synthesis by Mechanical Attrition

C. Koch, 2014 .

Finite element analysis of a shear punch test

R. Scattergood, C. Koch, K. Murty, 2006 .

A review of rapid solidification studies of intermetallic compounds

C. Koch, 1984 .

Metastable microstructures of rapidly solidified and undercooled FeAlC and Fe(Ni,Mn)AlC alloys

C. Koch, J. A. Sarreal, 1991 .

The Influence of Interstitial Alloying Elements on the Phase Stability and Fracture Toughness of V 3 Au

Y. Fahmy, C. Koch, M. Kassem, 1990 .

Electron diffraction structure analysis of rapidly solidified (Fe,Ni)3Al-C alloys

C. Koch, S. A. Myers, 1989 .

Rapidly solidified FeNiAlC alloys: Metastable phase formation

C. Koch, H. T. Chen, S. A. Myers, 1988 .

Rapidly Solidified Fe–Ni–Al–C Alloys: Metastable Phase Formation

C. Koch, H. T. Chen, S. A. Myers, 1988 .

Resistance of Nanostructured Fe-Cr Alloys to Oxidative Degradation: Role of Zr and Cr Contents

R. K. Singh Raman, C. Koch, R. S. Singh Raman, 2015, Metallurgical and Materials Transactions A.

RETRACTED: Fe–Cr–Ni–Zr alloys with bi-modal grain size distribution: Synthesis, mechanical properties and oxidation resistance

R. Scattergood, C. Koch, R. Raman, 2013 .

SUPERCONDUCTIVITY IN Mo--Re AND Nb--Ir sigma PHASES.

C. Koch, J. Scarbrough, 1971 .

Microstructural evolution of Ni40Zr60 alloy during early stage of mechanical alloying of intermetallic compounds NiZr2 and Ni11Zr9

C. Koch, Pee-Yew Lee, 1994 .

THE STRUCTURE OF AMORPHOUS ALLOYS SYNTHESIZED BY MECHANICAL ALLOYING-NON GLASS FORMING SYSTEMS

C. Koch, M. Kim, 1985 .

Mechanical Properties of Bulk Nanocrystalline Aluminum-Tungsten Alloys

R. Scattergood, C. Koch, T. Langdon, 2008 .

Superconductivity in Niobium Containing Ferromagnetic Gadolinium or Paramagnetic Yttrium Dispersions

C. Koch, G. Love, 1969 .

PRECIPITATES AND FLUXOID PINNING IN A SUPERCONDUCTING Nb--Hf ALLOY.

C. Koch, R. Carpenter, 1972 .

Control of Microstructures in the YBA 2 CU 3 O 7‐σ system: 1. Reaction with CO 2

A. Kingon, C. Koch, D. Haase, 1989 .

Hysteretic current-voltage characteristics of platelet boundaries in melt-textured bulk Ag-doped YBa2Cu3O7,δ and heating effects

A. Kingon, C. Koch, D. Haase, 1996 .

Measurement of current voltage characteristics of single grain boundaries in melt textured bulk YBa2Cu3Ox

A. Kingon, C. Koch, D. Haase, 1994 .

The frequency dependence of a.c. losses in type II superconductors

C. Koch, J. Charlesworth, D. J. Griffiths, 1976 .

Grain growth kinetics and microstructure in the high T_c YBa_2Cu_3O_7−δ superconductor

T. M. Hare, A. Kingon, C. Koch, 1991 .

On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium

R. Scattergood, C. Koch, E. Lavernia, 2017 .

Effects of interstitial oxygen on the superconductivity of niobium

C. Koch, D. Kroeger, J. Scarbrough, 1974 .

Mechanical properties, ductility, and grain size of nanocrystalline iron produced by mechanical attrition

C. Koch, T. Malow, 1998 .

Thermal stability and mechanical properties of nanocrystalline Fe–Ni–Zr alloys prepared by mechanical alloying

R. Scattergood, C. Koch, K. Darling, 2013, Journal of Materials Science.

Effect of annealing on microstructure, grain growth, and hardness of nanocrystalline Fe–Ni alloys prepared by mechanical alloying

R. Scattergood, C. Koch, M. Saber, 2012 .

Ball indentation tests for a Zr-based bulk metallic glass

R. Scattergood, C. Koch, K. Murty, 2005 .

Testing Techniques for Mechanical Characterization of Nanostructured Materials

R. Scattergood, C. Koch, K. Murty, 2003 .

In-situ atomic-scale observation of irradiation-induced void formation

C. Koch, Yuntian Zhu, G. Cheng, 2013, Nature Communications.

Fluxoid pinning in niobium containing small amounts of yttrium or gadolinium

C. Koch, D. Kroeger, 1974 .

EFFECTS OF SOME 3d AND 4d SOLUTES ON THE SUPERCONDUCTIVITY OF TECHNETIUM.

W. E. Gardner, C. Koch, M. Mortimer, 1972 .

The room-temperature lattice spacings of some intra rare-earth binary systems

I. R. Harris, C. Koch, G. Raynor, 1966 .

A prediction of the stress state in Nb3Sn superconducting composites

C. Koch, D. Easton, D. Kroeger, 1980 .

Direct observation of the flux distribution in the mixed state of V-Ga alloys using a scanning electron microscope

C. Koch, O. Singh, A. Curzon, 1976 .

Anisotropy of the upper critical field of superconducting technetium

C. Koch, G. Kostorz, L. Isaacs, 1971 .

ELASTIC MODULI AND DEBYE TEMPERATURE OF POLYCRYSTALLINE TECHNETIUM BY ULTRASONIC VELOCITY MEASUREMENTS.

C. Koch, G. Love, H. L. Whaley, 1970 .

Superconductivity in the Technetium—Vanadium Alloy System

C. Koch, S. Sekula, R. Kernohan, 1967 .

The electrical resistivity of technetium from 8.0° to 1700° K☆

C. Koch, G. Love, 1967 .

Structural Nanocrystalline Materials: Mechanical properties of structural nanocrystalline materials – theory and simulations

C. Koch, I. Ovid’ko, S. Seal, 2007 .

The effects of yttrium or gadolinium on the superconducting transition temperature of niobium

C. Koch, D. Kroeger, 1975 .

Dual gradient microstructure to simultaneously improve strength and electrical conductivity of aluminum wire

Jia Wan, C. Koch, Yi Hao, 2020 .

Mechanism of nanostructure formation in ball-milled Cu and Cu–3wt%Zn studied by X-ray diffraction line profile analysis

R. Scattergood, C. Koch, J. Eckert, 2014 .

Nanostructured Materials: An Overview

C. Koch, 2009 .

An in situ experimental study of grain growth in a nanocrystalline Fe91Ni8Zr1 alloy

R. Scattergood, C. Koch, K. Darling, 2013, Journal of Materials Science.

Temperature-induced morphological evolution in polymer blends produced by cryogenic mechanical alloying

C. Koch, H. Ade, R. Spontak, 2000 .

Cryogenic Mechanical Alloying of Poly(methyl methacrylate) with Polyisoprene and Poly(ethylene-alt-propylene)

C. Koch, H. Ade, R. Spontak, 2000 .

Loading Rate-Dependent Mechanical Properties of Bulk Two-Phase Nanocrystalline Al-Pb Alloys Studied by Nanoindentation

R. Scattergood, C. Koch, K. Murty, 2014, Metallurgical and Materials Transactions A.

Anomalous Phase Inversion in Polymer Blends Prepared by Cryogenic Mechanical Alloying

C. Koch, H. Ade, R. Spontak, 2001 .

Thermal stability, mechanical and electrical properties of nanocrystalline Cu3Ge

R. Scattergood, C. Koch, J. Narayan, 2008 .

Influence of configurational changes on the superconducting transition temperature of an amorphous zirconium-nickel alloy

C. Koch, A. Anderson, J. Scarbrough, 1982 .

Superconductivity in amorphous T/sub 5/T/sub 9/ transition metal alloys (T/sub 5/=Nb, Ta; T/sub 9/=Rh, Ir)

C. Koch, D. Kroeger, B. Giessen, 1980 .

Superconductivity in rapidly quenched Mo-P-B alloys

C. Koch, D. Easton, D. Kroeger, 1983 .

Pressure dependence of the superconducting transition temperature of T5T9 metallic glasses (T5Nb, Ta; T9Rh, Ir)

C. Koch, D. Kroeger, R. Shelton, 1983 .

Grain growth behaviour and consolidation of ball-milled nanocrystalline Fe–10Cr alloy

C. Koch, R. Gupta, R. Raman, 2008 .

Effects of short-range order on electronic properties of Zr-Ni glasses as seen from low-temperature specific heat

C. Koch, D. Kroeger, J. Scarbrough, 1984 .

Long-term stability of 14YT–4Sc alloy at high temperature

R. Scattergood, C. Koch, Yuntian Zhu, 2015 .

Preparation of bulk ultrafine-grained and nanostructured Zn, Al and their alloys by in situ consolidation of powders during mechanical attrition

C. Koch, J. Narayan, Xinghang Zhang, 2002 .

Carrier concentration modulation by hot pressing pressure in n-type nanostructured Bi(Se)Te alloy

C. Koch, R. Venkatasubramanian, J. Lebeau, 2013 .

Chapter 12 Nanostructured materials

C. Koch, C. Suryanarayana, 1999 .

Structural changes in poly(ethylene terephthalate) induced by mechanical milling

C. Koch, R. Spontak, C. Saw, 2000 .

Nature and density of lattice defects in ball milled nanostructured copper

R. Scattergood, C. Koch, M. Zehetbauer, 2013 .

The thermal stability of nanocrystalline Cu prepared by high energy ball milling

R. Scattergood, C. Koch, J. Tao, 2010, 2010 3rd International Nanoelectronics Conference (INEC).

Addition of a Block Copolymer to Polymer Blends Produced by Cryogenic Mechanical Alloying

C. Koch, H. Ade, R. Spontak, 2000 .

Cryogenic mechanical alloying as an alternative strategy for the recycling of tires

A. P. Smith, C. Koch, H. Ade, 2001 .

Mechanical Alloying of Pet and Pet/Vectra Blends

C. Koch, R. Spontak, C. Saw, 1996 .

Solid-State Blending of Polymers by Cryogenic Mechanical Alloying

C. Koch, H. Ade, R. Spontak, 2000 .

On the evolution of Cu-Ni-rich bridges of Alnico alloys with tempering

George S. Dulikravich, Min Fan, Y. Liu, 2016 .

On the Formation and Evolution of Cu–Ni-Rich Bridges of Alnico Alloys With Thermomagnetic Treatment

George S. Dulikravich, C. C. Koch, Y. Liu, 2016, IEEE Transactions on Magnetics.

Tensile properties of low-stacking fault energy high-entropy alloys

R. Scattergood, C. Koch, A. Zaddach, 2015 .

Magnetic Alloys Design Using Multi-objective Optimization

George S. Dulikravich, Min Fan, Marcelo J. Colaço, 2017 .

EXAFS study of the solid state amorphization process in an FeC alloy

C. Koch, T. Nasu, N. Itoh, 1991 .

Grain refinement induced friction reduction and anti-wear performances of electrodeposited graphene/Ni composites with low content reduced graphene oxide

Y. Liu, C. Koch, Yongsheng Liu, 2020 .

The Ultra Fine Grained (UFG) Zn Produced by Ball Milling

C. Koch, A. Sergueeva, A. Mukherjee, 2006 .

Mechanical Properties of Superconducting Nb-Ti Composites

C. Koch, D. Easton, 1977 .

Determination of Activation Volume in Nanocrystalline Cu Using the Shear Punch Test

R. Scattergood, C. Koch, K. Murty, 2007 .

Mechanical and Electrical Properties of Nanocrystalline and Epitaxial TiN Films

C. Koch, A. Kvit, X. Zhang, 2001 .

Mechanical Properties of Nanocrystalline Materials Produced by In Situ Consolidation Ball Milling

R. Scattergood, C. Koch, K. Youssef, 2008 .

Self-organizing maps for pattern recognition in design of alloys

Nirupam Chakraborti, George S. Dulikravich, Carlo Poloni, 2017 .

Effect of Pb on the mechanical properties of nanocrystalline Al

G. Duscher, R. Scattergood, C. Koch, 2006 .

PHOTOLUMINESCENCE FROM MECHANICALLY MILLED SI AND SIO2 POWDERS

Y. Fahmy, C. Koch, R. Nemanich, 1997 .

The effect of chemical short range ordering on crystallization of Zr-Ni glasses

C. Koch, D. Kroeger, J. Scarbrough, 1984 .

Severe deformation twinning in pure copper by cryogenic wire drawing

R. Scattergood, C. Koch, J. Eckert, 2011 .

Microstructural evolution and thermal stability of Fe–Zr metastable alloys developed by mechanical alloying followed by annealing

C. Koch, S. Sooraj, Suhrit Mula, 2016 .

Novel technique for the synthesis of ultra-fine porosity metal foam via the inclusion of condensed argon through cryogenic mechanical alloying

R. Scattergood, C. Koch, K. Darling, 2011 .

Effect of Nanocrystalline Structure on the Corrosion of a Fe20Cr Alloy

B. S. Murty, C. Koch, R. Gupta, 2013, International Journal of Electrochemical Science.

An investigation of the vanadium-technetium alloy system

C. Koch, G. Love, 1968 .

High-Energy Cryogenic Blending and Compatibilizing of Immiscible Polymers**

A. P. Smith, C. Koch, H. Ade, 1999 .

High-Performance Three-Stage Cascade Thermoelectric Devices with 20% Efficiency

C. Koch, B. Cook, R. Venkatasubramanian, 2015, Journal of Electronic Materials.

Loss Sources and Magnitudes in Axial-Flow Compressors

C. C. Koch, C. Koch, L. H. Smith, 1976 .

Energy efficient engine. High pressure compressor detail design report

C. C. Koch, P. R. Holloway, G. L. Knight, 1982 .

Stalling Pressure Rise Capability of Axial Flow Compressor Stages

C. C. Koch, C. Koch, 1981 .

Synergistic effect of Nb and Zr additions on the structure-property relationships of nanocrystalline Cu processed by mechanical alloying and hot pressing

R. Scattergood, C. Koch, A. Basumallick, 2021 .

Influence of scandium addition on the high-temperature grain size stabilization of oxide-dispersion-strengthened (ODS) ferritic alloy

R. Scattergood, C. Koch, Weizong Xu, 2015 .

Fabrication and oxidation resistance of nanocrystalline Fe10Cr alloy

R. K. Singh Raman, C. Koch, R. K. Gupta, 2010 .

Processing-structure-property relationships in ultrafine grain and nanocrystalline materials

C. Koch, C. C. Koch, 2009 .

Preparation of ductile nickel aluminides for high-temperature uses. [Doping with 500 ppM boron]

C. L. White, C. Koch, C. Liu, 1983 .

Synthesis of bulk nanostructured Zn by combinations of cryomilling and powder consolidation by room temperature milling: optimizing mechanical properties

R. Scattergood, C. Koch, A. Sergueeva, 2003 .

Strengthening mechanisms in nanocrystalline alloys

R. Scattergood, C. Koch, D. Brenner, 2008 .

Processing and Excellent Oxidation Resistance of Nanocrystalline Fe-Cr Alloys

R. K. Singh Raman, C. Koch, R. Gupta, 2010 .

The Ductility Problem in Nanocrystalline Materials

C. Koch, T. Malow, 1999 .

Grain size stability and hardness in nanocrystalline Cu-Al-Zr and Cu-Al-Y alloys

R. Scattergood, C. Koch, D. Roy, 2014 .

Studies on thermal stability, mechanical and electrical properties of nano crystalline Cu99.5Zr0.5 alloy

R. Scattergood, C. Koch, D. Roy, 2013 .

Accurate Nanoscale Crystallography in Real-Space Using Scanning Transmission Electron Microscopy

Jacob L. Jones, L. Allen, C. Koch, 2015, Microscopy and Microanalysis.

High-temperature ordered intermetallic alloys III; Proceedings of the Third Symposium, Boston, MA, Nov. 29-Dec. 1, 1988

C. Koch, N. Stoloff, A. Taub, 1989 .

Enhanced Thermoelectric Figure-of-merit at Room Temperature in Bulk Bi(Sb)Te(Se) With Grain Size of ∼100nm

C. Koch, R. Venkatasubramanian, J. Lebeau, 2013 .

Nanostructured Materials: Processing, Properties and Applications, 2nd Edition

C. Koch, 2006 .

The thermal and mechanical stability of Fe90−xAlxZr10 metallic glasses

C. Koch, D. Kroeger, J. Scarbrough, 1984 .

Solid State Amorphization of a Ni-B Alloy by Mechanical Alloying

C. Koch, T. Nasu, M. Sakurai, 1990 .

Tem of Nickel Aluminides Produced by Shock Compaction

C. Koch, R. Graham, Y. Horie, 1986 .

Library

C. Koch, E. Ma, M. Atzmon, 2002 .

The effect of cold-work (filing) on the X-ray diffraction patterns of some gadolinium-cerium alloys

I. R. Harris, C. Koch, G. Raynor, 1967 .

Thermodynamic Stabilization of Grain Size in Nanocrystalline Metals

R. Scattergood, C. Koch, K. Darling, 2012 .