H. Saito

发表

Effect of the braiding angle on the energy absorption properties of a hybrid braided FRP tube

H. Hamada, M. Okano, K. Sugimoto, 2005 .

Evaluation of impact damage mechanism of multi-axial stitched CFRP laminate

Hiroshi Saito, Isao Kimpara, H. Saito, 2006 .

Suppression of tool damage in ultraprecision diamond machining of stainless steel by applying electron-beam-excited plasma nitriding

E. Shamoto, H. Saito, Hongjin Jung, 2020 .

Mirror surface machining of high-alloy steels by elliptical vibration cutting with single-crystalline diamond tools: Influence of alloy elements on diamond tool damage

Hongjin Jung, Eiji Shamoto, Hiroshi Saito, 2017 .

Elliptical vibration cutting of hardened die steel with coated carbide tools

Hongjin Jung, Eiji Shamoto, Hiroshi Saito, 2016 .

Cooling rate influence on the warp of a CFRP asymmetric laminated beam

H. Saito, Y. Miyano, M. Nakada, 2021 .

Optimization Overlapping Ratio of Erbium: YAG Laser Irradiation for Less Thermal damaged Bone Cutting with Water Cooling

T. Dohi, N. Hata, H. Saito, 2005 .

Experimental Evaluation of the Damage Growth Restraining in 90° Layer of Thin-ply CFRP Cross-ply Laminates

H. Saito, I. Kimpara, H. Takeuchi, 2012 .

Laser Sintering of Silver Nanoparticles for Electronic Use

K. Maekawa, H. Saito, Y. Matsuba, 2010 .

Bonding Pad Fabrication for Printed Electronics Using Silver Nanoparticles

H. Saito, M. Nakatani, Masayuki Ueda, 2013 .

Packaging of electronic modules through completely dry process

K. Maekawa, H. Saito, K. Yamasaki, 2008, 2008 58th Electronic Components and Technology Conference.

A study of crack suppression mechanism of thin-ply carbon-fiber-reinforced polymer laminate with mesoscopic numerical simulation

H. Saito, I. Kimpara, H. Takeuchi, 2014 .

Experimental Evaluation of the Damage Growth Restraining in 90° Layer of Thin-ply CFRP Cross-ply Laminates

H. Saito, I. Kimpara, H. Takeuchi, 2012 .

Basic Study of Progressive Crushing Mechanism

H. Hamada, H. Saito, R. Inai, 2000 .

Radiation-resistant properties of cross-linking PTFE for medical use

H. Saito, Aira Matsugaki, T. Nakano, 2019, Polymer Bulletin.

High-Speed Laser Plating for Wire-Bonding Pad Formation

K. Maekawa, H. Saito, Y. Matsuba, 2010 .

DEVELOPMENT OF CU-BASED CNT COMPOSITE ELECTRODES FOR LOW WEAR PROPERTY IN ELECTRICAL DISCHARGE MACHINING

H. Saito, Tsunehisa Suzuki, T. Mitsui, 2007 .

Preparation of High- T c C-Axis Oriented EBCO thin Films On Si Substrates with Buffer Layers Using DC magnetron sputtering

H. Saito, H. Wakana, O. Michikami, 2000 .

Effect of surface treatments on the mechanical properties of natural fiber textile composites made by VaRTM method

H. Saito, H. Takagi, A. Nakagaito, 2014 .

Effect of ply-thickness on impact damage morphology in CFRP laminates

Hiroshi Saito, Kazumasa Kawabe, Isao Kimpara, 2011 .

Evaluation of Inkjet Technology for Electronic Packaging and System Integration

H. Saito, M. Mantysalo, J. Miettinen, 2007, 2007 Proceedings 57th Electronic Components and Technology Conference.

Cross-Sectional Area Measurement and Monofilament Strength Test of Kenaf Bast Fibers

Hiroshi Saito, Kunio Funami, Isao Kimpara, 2005 .

Improved Adherence Strength between Diamond Grains and Electrolytic Nickel Bonds by Carbon Nanotube Coatings

H. Saito, H. Iizuka, Tsunehisa Suzuki, 2011 .

Development of CNT-Coated Diamond Grains Using Self-Assembly Techniques for Improving Electroplated Diamond Tools

H. Saito, Seiya Kobayashi, Tsunehisa Suzuki, 2008 .

Post-impact fatigue behavior of woven and knitted fabric CFRP laminates for marine use (Special issue on long-term durability and damage tolerance of innovative marine composites)

H. Saito, I. Kimpara, 2007 .

Hydrolysis control by introduction of photodissociable protecting groups in PLA as matrix of green composite materials

Mototsugu Tanaka, H. Saito, I. Kimpara, 2014 .

Development of Co-based CNT Composite Electrodes for Low Wear Property in Electrical Discharge Machining

H. Saito, Tsunehisa Suzuki, T. Mitsui, 2017 .

Effect of Carbon Nanotube (CNT) Size on Wear Properties of Cu-Based CNT Composite Electrodes in Electrical Discharge Machining

H. Saito, H. Iizuka, Tsunehisa Suzuki, 2011 .

Drop-on-Demand Laser Sintering With Silver Nanoparticles for Electronics Packaging

Hiroshi Saito, Katsuhiro Maekawa, Kazuhiko Yamasaki, 2012, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Synthesis of CeO/sub 2/ films by ion beam assisted deposition

H. Saito, Y. Makino, Y. Setsuhara, 1998, 1998 International Conference on Ion Implantation Technology. Proceedings (Cat. No.98EX144).

Thin films from liquid crystals

H. Saito, S. Friberg, S. Linden, 1974, Nature.

Mirror Surface Machining of Steel by Elliptical Vibration Cutting with Diamond-Coated Tools Sharpened by Pulse Laser Grinding

Hongjin Jung, Eiji Shamoto, Fumihiro Itoigawa, 2018, Int. J. Autom. Technol..

Evaluation of Residual Stress in Blasted Surface Layer Using Indenting Process

H. Saito, M. Masuda, K. Ozawa, 2004 .

Energy absorption of braiding pultrusion process composite rods

Hiroshi Saito, Hiroyuki Hamada, E. C. Chirwa, 2002 .

Evaluation of Mode II Static Interlaminar Fracture Toughness in 0º/45º-Oriented Layers of CFRP Laminates

Mototsugu Tanaka, H. Saito, I. Kimpara, 2018, Journal of the Japan Society for Composite Materials.

Evaluation of Mode I interlaminar fracture toughness in asymmetric interlayer in CFRP laminates

H. Saito, I. Kimpara, Ryosuke Kikuchi, 2020, Advanced Composite Materials.

Stability of holographic gratings recorded on photopolymer films using acrylamide as monomer and N,N'-methylenebisacrylamide

Hiroshi Saito, Keiichi Osabe, H. Saito, 2015, Photonics West - Optoelectronic Materials and Devices.