S. Kandlikar

S. Kandlikar, Prabhu Balasubramanian, P. Balasubramanian, 2004, Proceeding of Compact Heat Exchangers and Enhancement Technology for the Process Industries - 2003.

Predicting Flow Boiling Heat Transfer of Refrigerants in Microfin Tubes

S. Kandlikar, Taavo Raykoff, 1997 .

Flow Boiling Heat Transfer With Binary and Ternary Mixtures in Microfin Tubes

S. Kandlikar, Nirihiro Inoue, A. Goto, 2000, Advances in Enhanced Heat Transfer.

Co-design of 3D wireless network-on-chip architectures with microchannel-based cooling

Amlan Ganguly, Md Shahriar Shamim, Jayanti Venkataraman, 2015, 2015 Sixth International Green and Sustainable Computing Conference (IGSC).

Development of a Flow Boiling Map for Subcooled and Saturated Flow Boiling of Different Fluids Inside Circular Tubes

S. Kandlikar, S. G. Kandlikar, 1991 .

Infrared imaging technology for breast cancer detection – Current status, protocols and new directions

Satish G. Kandlikar, Isaac Perez-Raya, Donnette Dabydeen, 2017 .

Heat Transfer in Microchannels—2012 Status and Research Needs

Stéphane Colin, R. Fabian Pease, Srinivas Garimella, 2013 .

Fundamental Research Needs in Combined Water and Thermal Management Within a Proton Exchange Membrane Fuel Cell Stack Under Normal and Cold-Start Conditions

Satish G. Kandlikar, Zijie Lu, S. Kandlikar, 2009 .

Water management studies in PEM fuel cells, part III: Dynamic breakthrough and intermittent drainage characteristics from GDLs with and without MPLs

Michael M. Daino, Cody D. Rath, S. Kandlikar, 2010 .

Modeling Two-Phase Pressure Drop along PEM Fuel Cell Reactant Channels

Evan J. See, S. Kandlikar, R. Banerjee, 2015 .

Two-phase pressure drop response during load transients in a PEMFC

S. Kandlikar, R. Banerjee, 2014 .

Modeling dynamic interaction between an emerging water droplet and the sidewall of a trapezoidal channel

S. Kandlikar, P. Gopalan, Preethi Gopalan, 2014 .

Water management studies in PEM fuel cells, part IV: Effects of channel surface wettability, geometr

Satish G. Kandlikar, Cody D. Rath, Zijie Lu, 2011 .

Water management studies in PEM fuel cells, Part II: Ex situ investigation of flow maldistribution, pressure drop and two-phase flow pattern in gas channels

Thomas A. Trabold, Jon P. Owejan, Satish G. Kandlikar, 2009 .

and Projections of Integrated Cooling Systems for Three-Dimensional Integrated Circuits

S. Kandlikar, 2014 .

A Review of Manufacturing Processes for Microchannel Heat Exchanger Fabrication

Satish G. Kandlikar, S. Kandlikar, S. Ashman, 2006 .

Multiphase Flow, Evaporation, and Condensation at the Microscale

S. Kandlikar, Y. Peles, M. Jensen, 2006 .

Experimental Study of Flow Patterns, Pressure Drop, and Flow Instabilities in Parallel Rectangular Minichannels

S. Kandlikar, Prabhu Balasubramanian, P. Balasubramanian, 2005 .

A Review of Vapor Chambers

S. Kandlikar, M. Bulut, N. Sozbir, 2018, Heat Transfer Engineering.

Characterization of a dual taper thermosiphon loop for CPU cooling in data centers

Aranya Chauhan, Satish G. Kandlikar, S. Kandlikar, 2019, Applied Thermal Engineering.

A thermosiphon loop for high heat flux removal using flow boiling of ethanol in OMM with taper

S. Kandlikar, S. Panse, 2017 .

Enhanced Flow Boiling of Ethanol in Open Microchannels With Tapered Manifolds in a Gravity-Driven Flow

S. Kandlikar, Philipp K. Buchling, 2016 .

Selected Papers from the Fifth International Conference on Nanochannels, Microchannels, and Minichannels

Satish G. Kandlikar, S. Kandlikar, 2009 .

CURRENT STATUS AND FUNDAMENTAL RESEARCH NEEDS IN THERMAL MANAGEMENT WITHIN A PEMFC STACK

S. Kandlikar, Zijie Lu, T. Trabold, 2007 .

Microchannels--Short History and Bright Future

Satish G. Kandlikar, S. Kandlikar, 2003 .

Viscosity of nanofluids containing anisotropic particles: A critical review and a comprehensive model

S. Kandlikar, X. Ye, C. Li, 2019, The European Physical Journal E.

Effect of Heat Flux on Bubble Coalescence Phenomena and Sound Signatures During Pool Boiling

S. Kandlikar, Akshat Negi, A. Rishi, 2021 .

Fouling and its mitigation in silicon microchannels used for IC chip cooling

S. Kandlikar, J. Perry, 2008 .

Entropy generation analysis of a microchannel-condenser for use in a vapor compression refrigeration cycle

S. Kandlikar, Göker Türkakar, T. Okutucu-Özyurt, 2016 .

Pressure Drop and Voltage Response of PEMFC Operation under Transient Temperature and Loading Conditions

Evan J. See, S. Kandlikar, R. Banerjee, 2013 .

INVESTIGATING THE EFFECT OF HEATING METHOD ON POOL BOILING HEAT TRANSFER

S. Kandlikar, M. Lombardo, Surendra K. Gupta, 2003 .

Cobalt Deposition in Graphene Quantum Dot Bath: Electrochemical and Spectroscopic Features: A Prospective Sensor Material

S. Kandlikar, K. Santhanam, P. Wong, 2018 .

A Scale Analysis Based Theoretical Force Balance Model for Critical Heat Flux (CHF) During Saturated Flow Boiling in Microchannels and Minichannels

S. Kandlikar, 2010 .

A SCALE ANALYSIS BASED THEORETICAL FORCE BALANCE MODEL FOR CRITICAL HEAT FLUX (CHF) DURING SATURATED FLOW BOILING IN MICROCHANNELS AND MINICHANNELS

S. Kandlikar, 2010 .

A Roadmap for Implementing Minichannels in Refrigeration and Air-Conditioning Systems—Current Status and Future Directions

S. Kandlikar, 2006 .

Thermohydraulic Performance Analysis of Offset Strip Fin Microchannel Heat Exchangers

S. Kandlikar, Akhilesh V. Bapat, 2006 .

ICNMM 2007-30142 EFFECTS OF FLOW FIELD AND DIFFUSION LAYER PROPERTIES ON WATER ACCUMULATION IN A PEM FUEL CELL

S. Kandlikar, D. Jacobson, M. Arif, 2007 .

Characterization of Pool Boiling of Seawater and Regulation of Crystallization Fouling by Physical Aberration

S. Kandlikar, P. Raghupathi, 2017 .

An Experimental Investigation of Structured Roughness Effect on Heat Transfer During Single-Phase Liquid Flow at Microscale

S. Kandlikar, T. Lin, 2012 .

Performance Assessment Comparison of Variable Fin Density Microchannels With Offset Configurations

S. Kandlikar, A. Hernandez-Guerrero, J. Gonzalez-Hernandez, 2016 .

A numerical study on the effects of 2d structured sinusoidal elements on fluid flow and heat transfer at microscale

V. V. Dharaiya, S. Kandlikar, 2013 .

A NUMERICAL STUDY TO PREDICT THE EFFECTS OF STRUCTURED ROUGHNESS ELEMENTS ON PRESSURE DROP AND HEAT TRANSFER ENHANCEMENT IN MINICHANNELS AND MICROCHANNELS

V. V. Dharaiya, S. Kandlikar, 2011 .

A Theoretical Model for Axial Heat Conduction Effects During Single-Phase Flow in Microchannels

S. Kandlikar, T. Lin, 2012 .

EXPERIMENTAL EVALUATION OF PRESSURE DROP ELEMENTS AND FABRICATED NUCLEATION SITES FOR STABILIZING FLOW BOILING IN MINICHANNELS AND MICROCHANNELS

Daniel A. Willistein, S. Kandlikar, J. Borrelli, 2005 .

SINGLE-PHASE LIQUID HEAT TRANSFER IN PLAIN AND ENHANCED MICROCHANNELS

S. Kandlikar, M. Steinke, 2006 .

Flow Boiling Heat Transfer Coefficient In Minichannels - Correlation and Trends

S. Kandlikar, M. Steinke, 2002 .

An Experimental Study on the Effect of Gravitational Orientation on Flow Boiling of Water in 1054×197μm Parallel Minichannels

Satish G. Kandlikar, S. Kandlikar, Prabhu Balasubramanian, 2005 .

Flow Boiling in Minichannels and Microchannels

S. Kandlikar, 2014 .

Experimental Study on the Effect of Stabilization on Flow Boiling Heat Transfer in Microchannels

S. Kandlikar, Wai Keat Kuan, 2007 .

Nucleation characteristics and stability considerations during flow boiling in microchannels

S. Kandlikar, 2006 .

Chapter 5 – Flow boiling in minichannels and microchannels

S. Kandlikar, 2006 .

High speed photographic observation of flow patterns during flow boiling in single rectangular minichannel

S. Kandlikar, Prabhu Balasubramanian, 2003 .

Experimental Study of Flow Patterns, Pressure Drop and Flow Instabilities in Parallel Rectangular Minichannels

S. Kandlikar, Prabhu Balasubramanian, 2004 .

ARTWORK-A REVIEW OF RESEARCH WORK DONE BY PROFESSOR ARTHUR ( Art )

S. Kandlikar, 2003 .

Improving aging performance of electrodeposited copper coatings during pool boiling

S. Kandlikar, Anju Gupta, A. Rishi, 2018, Applied Thermal Engineering.

Electrodeposition of Selective Anions with Non-Electrolyte Bath for Enhancing the Pool Boiling Performance

S. Kandlikar, A. Gupta, A. Rishi, 2017 .

Quantification and characterization of water coverage in PEMFC gas channels using simultaneous anode

S. Kandlikar, J. Sergi, 2011 .

Quantification and characterization of water coverage in PEMFC gas channels using simultaneous anode and cathode visualization and image processing

S. Kandlikar, J. Sergi, 2011 .

Through-Plane Water Transport Visualization in an Operating PEM Fuel Cell by Visible and Infrared Imaging

Michael M. Daino, S. Kandlikar, J. LaManna, 2010 .

Boiling Heat Transfer With Binary Mixtures: Part I—A Theoretical Model for Pool Boiling

Satish G. Kandlikar, S. Kandlikar, 1998 .

Effects of Surface Tension and Binary Diffusion on Pool Boiling of Dilute Solutions: An Experimental Assessment

S. Kandlikar, L. Alves, 1999 .

Boiling Heat Transfer With Binary Mixtures: Part II—Flow Boiling in Plain Tubes

S. Kandlikar, 1998 .

Effect of open microchannel geometry on pool boiling enhancement

S. Kandlikar, Dwight A. Cooke, 2012 .

An Experimental Investigation of Structured Roughness Effect on Heat Transfer During Single-Phase Liquid Flow at Microscale

S. Kandlikar, T. Lin, 2012 .

Mechanistic Considerations for Enhancing Flow Boiling Heat Transfer in Microchannels

S. Kandlikar, 2015 .

Interfacial oxygen transport resistance in a proton exchange membrane fuel cell air channel with an array of water droplets

S. Kandlikar, M. Koz, 2015 .

Investigation of Structure-Property-Boiling Enhancement Mechanisms of Copper/Graphene Nanoplatelets Coatings

S. Kandlikar, Anju Gupta, A. Rishi, 2021, Frontiers in Mechanical Engineering.

An Experimental Investigation Into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels

Nathan J. English, S. Kandlikar, 2005 .

Predicting Heat Transfer During Flow Boiling in Minichannels and Microchannels

S. Kandlikar, M. Steinke, 2003 .

Flow patterns and heat transfer mechanisms during flow boiling over open microchannels in tapered manifold (OMM)

S. Kandlikar, Ankit Kalani, 2015 .

Clinical Infrared Imaging in the Prone Position for Breast Cancer Screening—Initial Screening and Digital Model Validation

S. Kandlikar, J. Gonzalez-Hernandez, D. Dabydeen, 2020, Journal of Engineering and Science in Medical Diagnostics and Therapy.

Generation and Thermal Simulation of a Digital Model of the Female Breast in Prone Position

S. Kandlikar, J. Gonzalez-Hernandez, D. Dabydeen, 2018, Journal of Engineering and Science in Medical Diagnostics and Therapy.

Numerical models to simulate heat and mass transfer at sharp interfaces in nucleate boiling

S. Kandlikar, Isaac Perez-Raya, I. Perez-Raya, 2018, Numerical Heat Transfer, Part A: Applications.

Evaporation on a Planar Interface – Numerical Simulation and Theoretical Analysis of Heat and Mass Transport Processes

S. Kandlikar, Isaac Perez-Raya, 2016 .

Numerical modeling of interfacial heat and mass transport phenomena during a phase change using ANSYS-Fluent

S. Kandlikar, Isaac Perez-Raya, I. Perez-Raya, 2016 .

Comparing the Mixing Performance of Common Types of Chaotic Micromixers: A Numerical Study

I. A. Stogiannis, S. Kandlikar, Athanasios G. Kanaris, 2015 .

Scale effects on flow boiling heat transfer in microchannels: A fundamental perspective

S. Kandlikar, 2010 .

Molecular Dynamics Simulation and Measurement of Contact Angle of Water Droplet on a Platinum Surface

S. Kandlikar, S. Maruyama, M. Steinke, 2001, Heat Transfer: Volume 1 — Fundamentals of Heat Transfer.

Effect of Ball Milled and Sintered Graphene Nanoplatelets–Copper Composite Coatings on Bubble Dynamics and Pool Boiling Heat Transfer

S. Kandlikar, Anju Gupta, A. Rishi, 2020, Advanced Engineering Materials.

Salt templated and graphene nanoplatelets draped copper (GNP-draped-Cu) composites for dramatic improvements in pool boiling heat transfer

S. Kandlikar, Anju Gupta, A. Rishi, 2020, Scientific Reports.

Modeling Bubble Collisions at Liquid-Liquid and Compound Interfaces.

Travis S. Emery, S. Kandlikar, 2019, Langmuir : the ACS journal of surfaces and colloids.

Combining liquid inertia and evaporation momentum forces to achieve flow boiling inversion and performance enhancement in asymmetric Dual V-groove microchannels

S. Kandlikar, G. Ribatski, D. Moreira, 2022, International Journal of Heat and Mass Transfer.

Vapor chamber forced convection cooling using flow boiling in open microchannels and tapered manifolds

S. Kandlikar, Philipp K. Buchling, 2016, 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

S. Kandlikar, 2010 .

Modeling gas flow in PEMFC channels: Part I – Flow pattern transitions and pressure drop in a simulated ex situ channel with uniform water injection through the GDL

Evan J. See, S. Kandlikar, M. Grimm, 2012 .

Effect of Channel Material on Water Droplet Dynamics in a PEMFC Gas Channel

S. Kandlikar, P. Gopalan, 2013 .

Effect of Temperature on In-Plane Permeability of the Gas Diffusion Layer of PEM Fuel Cell

S. Kandlikar, R. Banerjee, 2011 .

Effect of Temperature on In-Plane Permeability of Water Vapor in the Gas Diffusion Layer of PEM Fuel Cells

S. Kandlikar, R. Banerjee, 2011 .

Coupled Motion of Contact Line on Nanoscale Chemically Heterogeneous Surfaces for Improved Bubble Dynamics in Boiling

S. Kandlikar, Arvind Jaikumar, 2017, Scientific Reports.

Effective Thermal Conductivity of Gas Diffusion Layers Used in PEMFC: Measured with Guarded-Hot-Plate Method and Predicted by a Fractal Model

S. Kandlikar, Zijie Lu, Arjun Radhakrishnan, 2010 .

Water emergence from the land region and water–sidewall interactions in Proton Exchange Membrane Fuel Cell gas channels with microgrooves

S. Kandlikar, M. Shah, 2015 .

Experimental validation of two-phase pressure drop multiplier as a diagnostic tool for characterizing PEM fuel cell performance

S. Kandlikar, R. Banerjee, D. Howe, 2014 .

Effect of Entrance Condition on Frictional Losses and Transition to Turbulence in Conventional and Minichannel Flows

S. Kandlikar, L. Campbell, 2004 .

Simulated Transient Analysis of a Polyimide V-Groove Leg Actuator with Serpentine Heater for a Walking Micro-Robot

Ritesh A. Khire, S. Kandlikar, W. Walter, 2002 .

CONTACT ANGLES OF DROPLETS DURING SPREAD AND RECOIL AFTER IMPINGING ON A HEATED SURFACE

S. Kandlikar, M. Steinke, 2001 .

Visualization of Fuel Cell Water Transport and Performance Characterization under Freezing Conditions

S. Kandlikar, T. Trabold, J. Allen, 2010 .

Water management studies in PEM fuel cells, Part I: Fuel cell design and in situ water distributions

Thomas A. Trabold, Jon P. Owejan, Satish G. Kandlikar, 2009 .

THE EFFECT OF INJECTION AND SUCTION ON THE INTERFACIAL MASS TRANSPORT RESISTANCE IN A PROTON EXCHANGE MEMBRANE FUEL CELL AIR CHANNEL

S. Kandlikar, M. Koz, 2014 .

A Preliminary Study for 3D Numerical Simulation of a Through-Plane Temperature Profile in a PEMFC Incorporating Coolant Channels

S. Kandlikar, M. Koz, 2012 .

V.F.7 Investigation of Micro- and Macro-Scale Transport Processes for Improved Fuel Cell Performance

W. Gu, S. Kandlikar, M. Mench, 2012 .

Through-Plane Water Transport Visualization in a PEMFC by Visible and Infrared Imaging

Michael M. Daino, S. Kandlikar, J. LaManna, 2011 .

IN SITU CHARACTERIZATION OF TWO-PHASE FLOW IN CATHODE CHANNELS OF AN OPERATING PEM FUEL CELL WITH VISUAL ACCESS

S. Kandlikar, Zijie Lu, J. Sergi, 2009 .

Investigation of Water Droplet Interaction with the Sidewalls of the Gas Channel in a PEM Fuel Cell in the Presence of Gas Flow

S. Kandlikar, Preethi Gopalan, 2011 .

WATER TRANSPORT VISUALIZATION AND TWO-PHASE PRESSURE DROP MEASUREMENTS IN A SIMULATED PEMFC CATHODE MINICHANNEL

S. Kandlikar, J. Owejan, T. Trabold, 2005 .

Two-phase flow patterns, pressure drop and heat transfer during boiling in minichannel and microchannel flow passages of compact evaporators

Satish G. Kandlikar, S. Kandlikar, 2001 .

History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review

Satish G. Kandlikar, S. Kandlikar, 2012 .

Effects of Weber number and surface temperature on the boiling and spreading characteristics of impinging water droplets

Mark E. Steinke, Satish G. Kandlikar, S. Kandlikar, 2002 .

High Speed Photographic Investigation of Liquid-Vapor Interface and Contact Line Movement During CHF and Transition Boiling

S. Kandlikar, M. Steinke, 2001, Heat Transfer: Volume 1 — Fundamentals of Heat Transfer.

Single-phase liquid flow in minichannels and microchannels

Satish G. Kandlikar, S. Kandlikar, 2014 .

Combining liquid inertia with pressure recovery from bubble expansion for enhanced flow boiling

S. Kandlikar, Ankit Kalani, 2015 .

Boiling and Condensation

Satish G. Kandlikar, S. Kandlikar, J. Chung, 2005 .

Contact line region heat transfer mechanisms for an evaporating interface

S. Kandlikar, P. Raghupathi, 2016 .

Hydrogen HorizonWith Petroleum Production on the Cusp of Decline, the World Must Find a New Fuel to Power its Transportation System. What Role Will Hydrogen Technologies Play in that Transition?

Michael M. Daino, Jacqueline M. Sergi, Jacob M. LaManna, 2009 .

Measurement of flow maldistribution in parallel channels and its application to ex-situ and in-situ experiments in PEMFC water management studies

Satish G. Kandlikar, W. Domigan, Zijie Lu, 2009 .

Discretization and implementation of a sharp interface model for interfacial heat and mass transfer during bubble growth

S. Kandlikar, I. Perez-Raya, 2018 .

Measurement of Heat Transfer in the Entrance Region of Small Diameter Tubes

S. Kandlikar, Chien-Yuh Yang, T. Lin, 2009 .

Heat Transfer and Fluid Flow in Minichannels and Microchannels

Stéphane Colin, Srinivas Garimella, Satish G. Kandlikar, 2005 .

ESTIMATING ROUGHNESS PARAMETERS RESULTING FROM VARIOUS MACHINING TECHNIQUES FOR FLUID FLOW APPLICATIONS

Satish G. Kandlikar, S. Kandlikar, Perry L. Young, 2007 .

A Review of Models for Water Droplet Detachment From the Gas Diffusion Layer-Gas Flow Channel Interface in PEMFCs

S. Kandlikar, Charles H. Schillberg, 2007 .

Electrochemical Deposition of Copper in Graphene Quantum Dot Bath: Pool Boiling Enhancement

S. Kandlikar, K. Santhanam, Arvind Jaikumar, 2016 .

Contact angles and interface behavior during rapid evaporation of liquid on a heated surface

Mark E. Steinke, Satish G. Kandlikar, S. Kandlikar, 2002 .

Film Size During Bubble Collision With a Solid Surface

Travis S. Emery, S. Kandlikar, 2019, Journal of Fluids Engineering.

Dual enhancement in HTC and CHF for external tubular pool boiling – A mechanistic perspective and future directions

Travis S. Emery, S. Kandlikar, Arvind Jaikumar, 2018, International Journal of Heat and Mass Transfer.

Pool boiling enhancement through contact line augmentation

S. Kandlikar, P. Raghupathi, 2017 .

Pool boiling enhancement through microporous coatings selectively electrodeposited on fin tops of open microchannels

S. Kandlikar, Chinmay M. Patil, 2014 .

Boiling Augmentation with Micro/Nanostructured Surfaces: Current Status and Research Outlook

Sushil H. Bhavnani, John R. Thome, Vinod Narayanan, 2014 .

Effect of Liquid Volume on Thermosiphon Loop Performance Using Open Microchannels Manifold for CPU Cooling in Data Center

Aranya Chauhan, Satish G. Kandlikar, S. Kandlikar, 2017 .

Investigation of Fouling and Its Mitigation in Silicon Microchannels

S. Kandlikar, J. Perry, 2008 .

INVESTIGATION OF FOULING IN MICROCHANNELS

S. Kandlikar, J. Perry, 2006 .

Heat Transfer Mechanisms During Flow Boiling in Microchannels

Satish G. Kandlikar, S. Kandlikar, 2004 .

Nanoscale Surface Modification Techniques for Pool Boiling Enhancement: A Critical Review and Future Directions

S. Kandlikar, Yen-Wen Lu, 2010 .

NUMERICAL STUDY OF AN EVAPORATING MENISCUS ON A MOVING HEATED SURFACE

S. Kandlikar, A. Mukherjee, 2006 .

Geometrical effects on heat transfer mechanisms during pool boiling in Dual Tapered Microgap with HFE7000

S. Kandlikar, A. Chauhan, 2022, International Journal of Heat and Mass Transfer.

Transforming pool boiling into self-sustained flow boiling through bubble squeezing mechanism in tapered microgaps

S. Kandlikar, A. Chauhan, 2020 .

Improved wettability of graphene nanoplatelets (GNP)/copper porous coatings for dramatic improvements in pool boiling heat transfer

S. Kandlikar, Anju Gupta, A. Rishi, 2019, International Journal of Heat and Mass Transfer.

Coupled Motion of Contact Line on Nanoscale Chemically Heterogeneous Surfaces for Improved Bubble Dynamics in Boiling

S. Kandlikar, Arvind Jaikumar, 2017, Scientific Reports.

Microscale Morphology Effects of Copper-Graphene Oxide Coatings on Pool Boiling Characteristics

S. Kandlikar, Arvind Jaikumar, Anju Gupta, 2017 .

Scale effects of graphene and graphene oxide coatings on pool boiling enhancement mechanisms

S. Kandlikar, C. Su, Chien-Yuh Yang, 2017 .

Pool boiling inversion through bubble induced macroconvection

S. Kandlikar, Arvind Jaikumar, 2017 .

Pool boiling enhancement through bubble induced convective liquid flow in feeder microchannels

S. Kandlikar, Arvind Jaikumar, 2016 .

Pool Boiling Heat Transfer and Bubble Dynamics Over Plain and Enhanced Microchannels

S. Kandlikar, Dwight A. Cooke, 2011 .

Effects of nanowire height on pool boiling performance of water on silicon chips

S. Kandlikar, Z. Yao, Yen-Wen Lu, 2011 .

Single-Phase Heat Transfer Enhancement Techniques in Microchannel and Minichannel Flows

Mark E. Steinke, Satish G. Kandlikar, S. Kandlikar, 2004 .

Heat transfer and fluid flow in minichannels and microchannels, 2nd edition

Stéphane Colin, Srinivas Garimella, Satish G. Kandlikar, 2014 .

Microchannels and Minichannels: History, Terminology, Classification and Current Research Needs

Satish G. Kandlikar, S. Kandlikar, 2003 .

Stabilization of Flow Boiling in Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites

Satish G. Kandlikar, Daniel A. Willistein, John Borrelli, 2006 .

Bubble nucleation and growth characteristics in subcooled flow boiling of water

Satish G. Kandlikar, Michael Cartwright, S. Kandlikar, 1997 .

Technology, application and potential of dynamic breast thermography for the detection of breast cancer

Satish G. Kandlikar, Alyssa Recinella, Donnette Dabydeen, 2019, International Journal of Heat and Mass Transfer.

Fundamental issues related to flow boiling in minichannels and microchannels

Satish G. Kandlikar, S. Kandlikar, 2002 .

Evolution of Microchannel Flow Passages--Thermohydraulic Performance and Fabrication Technology

Satish G. Kandlikar, William J. Grande, S. Kandlikar, 2003 .

Chapter 3 – Single-phase liquid flow in minichannels and microchannels

S. Kandlikar, 2006 .

Determination of effective water vapor diffusion coefficient in pemfc gas diffusion layers

S. Kandlikar, J. LaManna, 2011 .

Fabrication of nanowires on orthogonal surfaces of microchannels and their effect on pool boiling

S. Kandlikar, Z. Yao, Yen-Wen Lu, 2012 .

On the Nature of Critical Heat Flux in Microchannels

A. E. Bergles, Satish G. Kandlikar, S. Kandlikar, 2003 .

CRITICAL HEAT FLUX IN SUBCOOLED FLOW BOILING - AN ASSESSMENT OF CURRENT UNDERSTANDING AND FUTURE DIRECTIONS FOR RESEARCH

Satish G. Kandlikar, S. Kandlikar, 2001 .

CRITICAL HEAT FLUX IN SUBCOOLED FLOW BOILING

S. Kandlikar, 2022 .

Detection of Vesicular Stomatitis Virus using a Capacitive Immunosensor

B.A. Oakley, D.M. Hanna, S. Kandlikar, 2005, 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference.

Experimental Study of Heat Transfer in an Evaporating Meniscus on a Moving Heated Surface

Abhijit Mukherjee, Satish G. Kandlikar, S. Kandlikar, 2005 .

Handbook of Phase Change: Boiling and Condensation

Satish G. Kandlikar, S. Kandlikar, 1999 .

A Control Volume Approach for Investigating Forces on a Departing Bubble Under Subcooled Flow Boiling

S. Kandlikar, B. J. Stumm, 1995 .

Oxygen transport resistance at gas diffusion layer – Air channel interface with film flow of water in a proton exchange membrane fuel cell

S. Kandlikar, M. Koz, 2016 .

Residence time of water film and slug flow features in fuel cell gas channels and their effect on instantaneous area coverage ratio

S. Kandlikar, F. Elizalde-Blancas, A. Hernandez-Guerrero, 2015 .

Experimental investigation of two-phase flow pressure drop transients in polymer electrolyte membrane fuel cell reactant channels and their impact on the cell performance

S. Kandlikar, R. Banerjee, R. Banerjee, 2014 .

Two-Phase Pressure Drop Characteristics During Low Temperature Transients in PEMFCs

S. Kandlikar, R. Banerjee, 2014 .

Liquid water quantification in the cathode side gas channels of a proton exchange membrane fuel cell through two-phase flow visualization

Satish G. Kandlikar, S. Kandlikar, R. Banerjee, 2014 .

Microscale and Macroscale Aspects of Water Management Challenges in PEM Fuel Cells

S. Kandlikar, 2008 .

Effects of Flow Field and Diffusion Layer Properties on Water Accumulation in a PEM Fuel Cell

Thomas A. Trabold, Jon P. Owejan, Satish G. Kandlikar, 2007 .

Ultra-high pool boiling performance and effect of channel width with selectively coated open microchannels

S. Kandlikar, Arvind Jaikumar, 2016 .

Two-Phase Flow Patterns, Pressure Drop, and Heat Transfer during Boiling in Minichannel Flow Passages of Compact Evaporators

Satish G. Kandlikar, S. Kandlikar, 2002 .

Two-phase flow and thermal transients in proton exchange membrane fuel cells – A critical review

Satish G. Kandlikar, S. Kandlikar, R. Banerjee, 2015 .

Asymptotic Effectiveness-NTU Formulas for Multipass Plate Heat Exchangers

Satish G. Kandlikar, Ramesh K. Shah, R. Shah, 1989 .

Effect of taper on pressure recovery during flow boiling in open microchannels with manifold using homogeneous flow model

S. Kandlikar, Ankit Kalani, 2015 .

Single-Phase Liquid Friction Factors in Microchannels

Satish G. Kandlikar, Mark E. Steinke, S. Kandlikar, 2006 .

Uneven gas diffusion layer intrusion in gas channel arrays of proton exchange membrane fuel cell and its effects on flow distribution

Satish G. Kandlikar, Michael M. Daino, Zijie Lu, 2009 .

SINGLE-PHASE LIQUID HEAT TRANSFER IN MICROCHANNELS

Mark E. Steinke, Satish G. Kandlikar, S. Kandlikar, 2005 .

Water Management in A PEMFC: Water Transport Mechanism and Material Degradation in Gas Diffusion Layers

Satish G. Kandlikar, S. Kandlikar, Matthew L. Garofalo, 2011 .

Effects of Structured Roughness on Fluid Flow at the Microscale Level

Satish G. Kandlikar, Rebecca N. Wagner, S. Kandlikar, 2012 .

NUMERICAL SIMULATION OF FLOW THROUGH MICROCHANNELS IN BIPOLAR PLATE

Sushanta K. Mitra, Amit Agrawal, A. S. Rawool, 2005 .

Flow Boiling and Pressure Drop in Parallel Flow Microchannels

Mark E. Steinke, Satish G. Kandlikar, S. Kandlikar, 2003 .

Thermofluid Dynamics of Boiling in Microchannels

S. Kandlikar, S. Saha, G. Celata, 2011 .

Review of the Manufacturing Techniques for Porous Surfaces Used in Enhanced Pool Boiling

S. Kandlikar, Chinmay M. Patil, 2014 .

Enhanced Flow Boiling Over Open Microchannels With Uniform and Tapered Gap Manifolds

Satish G. Kandlikar, S. Kandlikar, Theodore Widger, 2013 .

Evaluation of Jet Impingement, Spray and Microchannel Chip Cooling Options for High Heat Flux Removal

Satish G. Kandlikar, S. Kandlikar, Akhilesh V. Bapat, 2007 .

Liquid Cooled Cold Plates for Industrial High-Power Electronic Devices—Thermal Design and Manufacturing Considerations

Satish G. Kandlikar, S. Kandlikar, Clifford N. Hayner, 2009 .

Numerical study of bubble growth and wall heat transfer during flow boiling in a microchannel

Abhijit Mukherjee, Satish G. Kandlikar, Zachary J. Edel, 2011 .

Enhanced Flow Boiling Using Radial Open Microchannels With Manifold and Offset Strip Fins

S. Kandlikar, Alyssa Recinella, 2018 .

Numerical Investigation of Heat Transfer in Rectangular Microchannels Under H2 Boundary Condition During Developing and Fully Developed Laminar Flow

V. V. Dharaiya, S. Kandlikar, 2012 .

Enhanced pool boiling for electronics cooling using porous fin tops on open microchannels with FC-87

Satish G. Kandlikar, S. Kandlikar, Arvind Jaikumar, 2015 .

Mathematical Model for Fluid Flow in Artificially Roughened Microchannels

Satish G. Kandlikar, Rebecca N. Wagner, S. Kandlikar, 2009 .

Enhanced Pool Boiling With Ethanol at Subatmospheric Pressures for Electronics Cooling

S. Kandlikar, Ankit Kalani, 2013 .

Pool boiling heat transfer enhancement over cylindrical tubes with water at atmospheric pressure, Part I: Experimental results for circumferential rectangular open microchannels

Jeet S. Mehta, S. Kandlikar, 2013 .

Examples of Microchannel Mass Transfer Processes in Biological Systems

S. Kandlikar, M. Steinke, 2003 .

A Photographic Insight Into the Motion of Liquid-Vapor Interface During Rapid Evaporation of a Liquid Droplet on a Heated Surface

S. Kandlikar, 2001, Heat Transfer: Volume 3 — Fluid-Physics and Heat Transfer for Macro- and Micro-Scale Gas-Liquid and Phase-Change Flows.

Evaporation Momentum Force and Its Relevance to Boiling Heat Transfer

S. Kandlikar, 2020 .

Development of an Experimental Facility for Investigating Single-Phase Liquid Flow in Microchannels

Evan G. Colgan, Mark E. Steinke, Satish G. Kandlikar, 2006 .

Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cooling—Thermohydraulic Performance Enhancement and Fabrication Technology

Satish G. Kandlikar, William J. Grande, S. Kandlikar, 2004 .

Critical Heat Flux Measurement and Model for Refrigerant-123 Under Stabilized Flow Conditions in Microchannels

S. Kandlikar, Wai Keat Kuan, 2006 .

Experimental Study and Model on Critical Heat Flux of Refrigerant-123 and Water in Microchannels

S. Kandlikar, Wai Keat Kuan, 2008 .

High Flux Heat Removal with Microchannels—A Roadmap of Challenges and Opportunities

Satish G. Kandlikar, S. Kandlikar, 2005 .

Development of an Experimental Facility for Investigating Critical Heat Flux of Saturated Flow Boiling of Refrigerant-123 in Microchannels

S. Kandlikar, Wai Keat Kuan, 2005 .

High Flux Heat Removal With Microchannels: A Roadmap of Challenges and Opportunities (Keynote)

Satish G. Kandlikar, S. Kandlikar, 2005 .

Control and effect of dissolved air in water during flow boiling in microchannels

S. Kandlikar, M. Steinke, 2004 .

Evolution of microchannel flow passages – Thermohydraulic performance and fabrication technology

Satish G. Kandlikar, William J. Grande, S. Kandlikar, 2002 .

An Experimental Investigation on Friction Characteristics and Heat Transfer of Air and CO2 Flow in Microtubes With Structured Surface Roughness

S. Kandlikar, Chien-Yuh Yang, T. Lin, 2014 .

Heat transfer and friction characteristics of air flow in microtubes

Satish G. Kandlikar, Chien-Yuh Yang, S. Kandlikar, 2012 .

Application of Lubrication Theory and Study of Roughness Pitch During Laminar, Transition, and Low Reynolds Number Turbulent Flow at Microscale

Satish G. Kandlikar, S. Kandlikar, Timothy P. Brackbill, 2010 .

AN EXPERIMENTAL INVESTIGATION ON HEAT TRANSFER CHARACTERISTICS OF AIR AND CO2 IN MICROTUBES

S. Kandlikar, Chien-Yuh Yang, T. Lin, 2011 .

Surface Roughness Effects on Heat Transfer in Microscale Single Phase Flow: A Critical Review

Satish G. Kandlikar, S. Kandlikar, Perry L. Young, 2008 .

EFFECTS OF LOW UNIFORM RELATIVE ROUGHNESS ON SINGLE-PHASE FRICTION FACTORS IN MICROCHANNELS AND MINICHANNELS

Satish G. Kandlikar, S. Kandlikar, Timothy P. Brackbill, 2007 .

Effect Of Non Uniform Flow Distribution On Single Phase Heat Transfer In Parallel Microchannels

S. Kandlikar, Akhilesh V. Bapat, 2007 .

Roughness effects at microscale - reassessing Nikuradse's experiments on liquid flow in rough tubes

Satish G. Kandlikar, S. Kandlikar, 2005 .

Heat Transfer Enhancement During Pool Boiling of Water Over Horizontal and Vertical Tubes With Micro Structured Surfaces

Jeet S. Mehta, S. Kandlikar, 2012 .

EFFECT OF DYNAMIC CONTACT ANGLE ON SINGLE BUBBLES DURING NUCLEATE POOL BOILING

S. Kandlikar, A. Mukherjee, 2004 .

An Experimental Investigation on Flow Boiling of Ethylene-Glycol/ Water Mixtures

Murat Bulut, Satish G. Kandlikar, S. Kandlikar, 2003 .

Heat Transfer Characteristics in Partial Boiling, Fully Developed Boiling, and Significant Void Flow Regions of Subcooled Flow Boiling

Satish G. Kandlikar, S. Kandlikar, 1997, Fluids Engineering.

A New Perspective on Heat Transfer Mechanisms and Sonic Limit in Pool Boiling

S. Kandlikar, 2019, Journal of Heat Transfer.

Effect of channel materials and trapezoidal corner angles on emerging droplet behavior in Proton Exchange Membrane Fuel Cell gas channels

S. Kandlikar, Preethi Gopalan, 2014 .

Investigation of Water Vapor Diffusivity Through GDL of a PEMFC

S. Kandlikar, J. LaManna, 2009 .

Effect of Heat Flux on Bubble Coalescence Phenomena and Sound Signatures During Pool Boiling

S. Kandlikar, Akshat Negi, A. Rishi, 2020, Journal of Heat Transfer.

Optimization of Microchannel Geometry for Direct Chip Cooling Using Single Phase Heat Transfer

S. Kandlikar, H. Upadhye, Harshal R. Upadhye, 2004 .

Heat Transfer From a Moving and Evaporating Meniscus on a Heated Surface

S. Kandlikar, Wai Keat Kuan, 2003 .

Extending the heat flux limit with enhanced microchannels in direct single-phase cooling of computer chips

S. Kandlikar, S.G. Kandlikar, H.R. Upadhye, 2005, Semiconductor Thermal Measurement and Management IEEE Twenty First Annual IEEE Symposium, 2005..

Droplet-Sidewall Dynamic Interactions in PEMFC Gas Channels

S. Kandlikar, Preethi Gopalan, 2012 .

Repetitive Pool Boiling Runs: A Controlled Process to Form Reduced Graphene Oxide Surfaces from Graphene Oxide with Tunable Surface Chemistry and Morphology

S. Kandlikar, Anju Gupta, A. Rishi, 2019, Industrial & Engineering Chemistry Research.

A Multiscale Morphological Insight into Graphene Based Coatings for Pool Boiling Applications

S. Kandlikar, Arvind Jaikumar, Anju Gupta, 2018 .

Heat Transfer Investigation of Air Flow in Microtubes—Part I: Effects of Heat Loss, Viscous Heating, and Axial Conduction

S. Kandlikar, T. Lin, 2013 .

Heat Transfer Investigation of Air Flow in Microtubes-Part II: Scale and Axial Conduction Effects.

S. Kandlikar, T. Lin, 2013, Journal of heat transfer.

Contact line characteristics of liquid–gas interfaces over grooved surfaces

S. Kandlikar, Preethi Gopalan, 2014 .

Subcooled flow boiling in an expanding microgap with a hybrid microstructured surface

S. Kandlikar, L. Jia, A. Chauhan, 2020 .

Numerical study of single bubbles with dynamic contact angle during nucleate pool boiling

Abhijit Mukherjee, Satish G. Kandlikar, S. Kandlikar, 2007 .

Bubble growth and departure trajectory under asymmetric temperature conditions

S. Kandlikar, P. Raghupathi, 2016 .

EFFECT OF EVAPORATION MOMENTUM FORCE ON BUBBLE DEPARTURE TRAJECTORY

S. Kandlikar, P. Raghupathi, 2017 .

Investigation of Water Transport in an Ex-Situ Experimental Facility Modelled on an Actual DOE Automotive Target Complient Fuel Cell

Satish G. Kandlikar, W. Domigan, A. D. White, 2008 .

Cooling of Microelectronic Devices Packaged in a Single Chip Module Using Single Phase Refrigerant R-123

S. Kandlikar, Tushara Pasupuleti, 2009 .

The effect of inlet constriction on bubble growth during flow boiling in microchannels

S. Kandlikar, A. Mukherjee, 2009 .

POOL BOILING HEAT TRANSFER OVER MICROCHANNEL SURFACES WITH ETHANOL AT ATMOSPHERIC PRESSURE

S. Kandlikar, Ankit Kalani, 2012 .

Evaluation of Pressure Drop Performance During Enhanced Flow Boiling in Open Microchannels With Tapered Manifolds

S. Kandlikar, Ankit Kalani, 2014 .

Pool Boiling Enhancement through Graphene and Graphene Oxide Coatings

S. Kandlikar, Arvind Jaikumar, Anju Gupta, 2017 .

Electrochemical Deposition of Copper on Graphene with High Heat Transfer Coefficient

S. Kandlikar, K. Santhanam, Arvind Jaikumar, 2015 .

Regulating flow of vapor to enhance pool boiling

Travis S. Emery, S. Kandlikar, Austin C. Hayes, 2019, Applied Thermal Engineering.

Bubble induced flow field modulation for pool boiling enhancement over a tubular surface

Travis S. Emery, S. Kandlikar, Arvind Jaikumar, 2017 .

Pool boiling heat transfer enhancement over cylindrical tubes with water at atmospheric pressure, Part II: Experimental results and bubble dynamics for circumferential V-groove and axial rectangular open microchannels

Jeet S. Mehta, S. Kandlikar, 2013 .

An improved correlation for predicting two-phase flow boiling heat transfer coefficient in horizontal and vertical tubes

S. Kandlikar, S. G. Kandlikar, 1983 .

Experimental Study on the Effect of Stabilization on Flow Boiling Heat Transfer in Microchannels

S. Kandlikar, Wai Keat Kuan, 2007 .

Critical heat flux in microchannels: Experimental issues and guidelines for measurement

S. Kandlikar, A. Bergles, 2003 .

Effect of Surface Finish on Flow Boiling Heat Transfer

S. Kandlikar, Paul H. Spiesman, 1998, Heat Transfer: Volume 1 — Heat Transfer in Flowing Systems.

Evaluation of heater size and external enhancement techniques in pool boiling heat transfer with dielectric fluids

S. Kandlikar, A. Chauhan, Maharshi B Shukla, 2022, International Journal of Heat and Mass Transfer.

Evaluation of Imaging Techniques Applied to Water Management Research in PEMFCs

Michael M. Daino, S. Kandlikar, 2009 .

A Critical Review of Water Transport Models in Gas Diffusion Media of PEM Fuel Cell

Satish G. Kandlikar, Jacob M. LaManna, S. Kandlikar, 2008 .

Effects of Freezing and Thawing on the Structures of Porous Gas Diffusion Media

Satish G. Kandlikar, Joaquin A. Pelaez, S. Kandlikar, 2007 .

An inverse heat transfer approach for patient-specific breast cancer detection and tumor localization using surface thermal images in the prone position

Satish G. Kandlikar, Jose-Luis Gonzalez-Hernandez, Alyssa Recinella, 2020 .

Thermal Conductivity Performance Modeling and Characterization of a Novel Anisotropic Conductive Adhesive Used in Lead-Free Electronics Packaging

S. Kandlikar, M. Combs, S. Ramkumar, 2012 .

Evaluation of a Tapered Header Configuration to Reduce Flow Maldistribution in Minichannels and Microchannels

Satish G. Kandlikar, V. V. Dharaiya, A. Radhakrishnan, 2009 .

Transient response of heat exchangers

D. Bunce, Satish G. Kandlikar, S. Kandlikar, 1995 .

Bubble growth inside an evaporating liquid droplet introduced in an immiscible superheated liquid

Travis S. Emery, S. Kandlikar, P. Raghupathi, 2018, International Journal of Heat and Mass Transfer.

Pressure Drop Analysis Using the Homogeneous Model for Open Microchannel with Manifold (OMM)

S. Kandlikar, Ankit Kalani, 2014 .

Experimental Investigation of Flow Boiling Performance of Open Microchannels With Uniform and Tapered Manifolds (OMM)

S. Kandlikar, Ankit Kalani, 2013 .

An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels

Satish G. Kandlikar, Nathan J. English, S. Kandlikar, 2006 .

Development of an Experimental Facility for Investigating Single-Phase Liquid Flow in Microchannels

E. Colgan, J. Magerlein, S. Kandlikar, 2006 .

Numerical study of the effect of inlet constriction on bubble growth during flow boiling in microchannels

S. Kandlikar, A. Mukherjee, 2005 .

Extending the Applicability of the Flow Boiling Correlation to Low Reynolds Number Flows in Microchannels

S. Kandlikar, P. Balasubramanian, 2003 .

High-Speed photographic observation of flow boiling of water in parallel mini-channels

Mark E. Steinke, Satish G. Kandlikar, Levi A. Campbell, 2001 .

1 CORRELATING EVAPORATION HEAT TRANSFER COEFFICIENT OF REFRIGERANT R-134 a IN A PLATE HEAT EXCHANGER

S. Kandlikar, Vincent D. Donowski, 2003 .

Microchannels: Rapid Growth of a Nascent Technology

S. Kandlikar, 2010 .

Comparison of Roughness Parameters for Various Microchannel Surfaces in Single-Phase Flow Applications

Satish G. Kandlikar, S. Kandlikar, Perry L. Young, 2009 .

Evaluation of wireless network-on-chip architectures with microchannel-based cooling in 3D multicore chips

Amlan Ganguly, Md Shahriar Shamim, Rounak Singh Narde, 2019, Sustain. Comput. Informatics Syst..

Experimental study of heat transfer in a microchannel with pin fins and sintered coatings

S. Kandlikar, M. Bulut, N. Sozbir, 2023, Experimental heat transfer.

Influence of Liquid Height on Bubble Coalescence, Vapor Venting, Liquid Return, and Heat Transfer in Pool Boiling

S. Kandlikar, Maharshi Y. Shukla, 2021, International Journal of Heat and Mass Transfer.

Numerical simulation of flow through microchannels with designed roughness

Sushanta K. Mitra, A. S. Rawool, Satish G. Kandlikar, 2006 .

Liquid filling in a corner with a fibrous wall—An application to two-phase flow in PEM fuel cell gas channels

Cody D. Rath, S. Kandlikar, 2011 .

A Two-Phase Pressure Drop Model Incorporating Local Water Balance and Reactant Consumption in PEM Fuel Cell Gas Channels

Evan J. See, S. Kandlikar, 2013 .

3D phase-differentiated GDL microstructure generation with binder and PTFE distributions

Michael M. Daino, S. Kandlikar, 2012 .

Effect of Liquid-Vapor Phase Distribution on the Heat Transfer Mechanisms during Flow Boiling in Minichannels and Microchannels

Satish G. Kandlikar, S. Kandlikar, 2006 .

Nomenclature Cp specific heat at constant pressure D bubble diameter g gravity vector H Heaviside function h grid spacing hfg latent heat of evaporation k thermal conductivity L length of bubble l 0 length scale m mass

S. Kandlikar, A. Mukherjee, 2009 .

Effect of GDL Material on Thermal Gradients along the Reactant Flow Channels in PEMFCs

Evan J. See, S. Kandlikar, 2013 .

Predicting the properties of mixtures of R22 and R12 part II - Transport properties

Satish G. Kandlikar, S. Kandlikar, S. Sukhatme, 1975 .

Effect of Thermophysical Properties of the Heater Substrate on Critical Heat Flux in Pool Boiling

S. Kandlikar, P. Raghupathi, 2017 .

Pool boiling with four non-ozone depleting refrigerants and comparison with previously established correlations

Travis S. Emery, S. Kandlikar, 2017 .

INSIGHT INTO MECHANICSMS AND REVIEW OF AVAILABLE MODELS FOR CRITICAL HEAT FLUX (CHF) IN POOL BOILING

S. Kandlikar, 2002 .

BUBBLE CHARACTERISTICS AND CONVECTIVE EFFECTS IN THE FLOW BOILING HEAT TRANSFER OF BINARY MIXTURES

S. Kandlikar, Taavo Raykoff, 2003 .

Further Evaluation of a Flow Boiling Correlation for Microchannels and Minichannels

S. Kandlikar, J. Peters, 2007 .

Investigating the Effect of the Fluid Properties on Bubble Dynamics and Heat Transfer in a Tapered Microgap with Multiphase Flow Modeling

S. Kandlikar, I. Perez-Raya, Maharshi Y. Shukla, 2023, Applied Thermal Engineering.

An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in

S. Kandlikar, 2007 .

Vapor Liquid Equilibrium Properties

S. Kandlikar, 2019, Handbook of Phase Change: Boiling and Condensation.

Variable Fin Density Flow Channels for Effective Cooling and Mitigation of Temperature Nonuniformity in Three-Dimensional Integrated Circuits

S. Kandlikar, Daniel Lorenzini-Gutierrez, 2014 .

FLOW BOILING HEAT TRANSFER OF REFRIGERANTS IN MICROFIN TUBES

S. Kandlikar, Taavo Raykoff, 2017 .