B. Sammakia

K. Ghose, B. Sammakia, Sadegh Khalili, 2018, 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Impact of Fans Location on the Cooling Efficiency of IT Servers

Mohammad I. Tradat, B. Sammakia, Sadegh Khalili, 2019, 2019 18th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Chip to Chiller Experimental Cooling Failure Analysis of Data Centers: The Interaction Between IT and Facility

Kourosh Nemati, Dustin W. Demetriou, Bahgat G. Sammakia, 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

The Impact of Cold Aisle Containment Pressure Relief on IT Availability

Kanad Ghose, Husam A. Alissa, Udaya L.N. Puvvadi, 2018, 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Impact of Tile Design on Thermal Performance of Open and Enclosed Aisles

Mohammad I. Tradat, B. Sammakia, Sadegh Khalili, 2017 .

General Guidelines for Commercialization a Small-Scale In-Row Cooled Data Center: A Case Study

Mohammad I. Tradat, B. Sammakia, M. Seymour, 2020, 2020 36th Semiconductor Thermal Measurement, Modeling & Management Symposium (SEMI-THERM).

Degradation of Fan Performance in Cooling Electronics: Experimental Investigation and Evaluating Numerical Techniques

Mohammad I. Tradat, B. Sammakia, A. Ortega, 2021 .

Experimental Analysis of Chiller Cooling Failure in a Small Size Data Center Environment Using Wireless Instrumentation

Mohammad I. Tradat, B. Sammakia, K. Nemati, 2018, ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems.

An Efficient Network Model for Determining the Effective Thermal Conductivity of Particulate Thermal Interface Materials

B. Sammakia, G. Subbarayan, T. Siegmund, 2008, IEEE Transactions on Components and Packaging Technologies.

Numerical investigation of inter-zonal boundary conditions for data center thermal analysis

Bahgat Sammakia, Bruce T. Murray, Zhihang Song, 2014 .

A Compact Thermal Model for Data Center Analysis using the Zonal Method

Bahgat Sammakia, Bruce T. Murray, Zhihang Song, 2013 .

Performance analysis and shape optimization of a water-cooled impingement micro-channel heat sink including manifolds

B. Sammakia, P. Chiarot, K. Nemati, 2020, International Journal of Thermal Sciences.

Novel Experimental Methodology for Characterizing Fan Performance in Highly Resistive Environments

Mohammad I. Tradat, B. Sammakia, A. Ortega, 2020, 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Three-objective shape optimization and parametric study of a micro-channel heat sink with discrete non-uniform heat flux boundary conditions

B. Sammakia, P. Chiarot, Bharath Ramakrishnan, 2019, Applied Thermal Engineering.

A new technique for calibrating piezoresistive stress sensor chips

B. Sammakia, F. Andros, W. Infantolino, 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Parametric studies of the thermal performance of back-to-back tape ball grid array (TBGA) packages

B. Sammakia, K. Srihari, S. Tonapi, 2001, 2001 Proceedings. 51st Electronic Components and Technology Conference (Cat. No.01CH37220).

Heat Conduction in Three Dimensional Stacked Packages

B. Sammakia, J. Geer, A. Desai, 2005 .

Minimizing the Effects of On-Chip Hotspots Using Multi-Objective Optimization of Flow Distribution in Water-Cooled Parallel Microchannel Heatsinks

B. Sammakia, P. Chiarot, S. Rangarajan, 2020 .

A Finite Difference Lattice Boltzmann Method to Simulate Multidimensional Subcontinuum Heat Conduction

B. Sammakia, J. Geer, Cheng Chen, 2016 .

An Assessment of Risk of Fracture During Wirebond Over Active Circuits on ULK Dies

B. Sammakia, G. Subbarayan, Hung-Yun Lin, 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

The Impact of Interfacial Adhesion on PTH and Via Stress State

B. Sammakia, G. Subbarayan, K. Ramakrishna, 1997 .

Squeezing Flow of a Power Law Fluid Between Grooved Plates

Bahgat Sammakia, Drew A. Davidson, B. Sammakia, 2009 .

Data center crossflow heat exchanger study under different transient temperature boundary conditions

Bahgat Sammakia, Tianyi Gao, Bruce Murray, 2014, 2014 Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM).

Hybrid microchannel/multi-jet two-phase heat sink: A benchmark and geometry optimization study of commercial product

Scott N. Schiffres, B. Sammakia, Sadegh Khalili, 2021 .

Performance Analysis and Shape Optimization of an Impingement Microchannel Cold Plate

B. Sammakia, P. Chiarot, C. H. Hoang, 2020, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Experimental and Analytical Studies on the High Cycle Fatigue of Thin Film Metal on PET Substrate for Flexible Electronics Applications

B. Sammakia, M. Poliks, K. Alzoubi, 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.

An Experimental Apparatus for Two-phase Cooling of High Heat Flux Application using an Impinging Cold Plate and Dielectric Coolant

Scott N. Schiffres, B. Sammakia, K. Sikka, 2020, 2020 36th Semiconductor Thermal Measurement, Modeling & Management Symposium (SEMI-THERM).

Significance Level of Factors for Different Airflow Management Configurations of Data Centers

Bahgat Sammakia, Madhusudan K. Iyengar, Roger R. Schmidt, 2005 .

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES BOARD OF GOVERNORS (Continued on back cover)

Michael Pecht, Bahgat Sammakia, Avram Bar-Cohen, 2005 .

Simulations of damage and fracture in ULK under pad structures during Cu wirebond process

B. Sammakia, G. Subbarayan, Hung-Yun Lin, 2014, Fourteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Comparisons of the Mechanical Behaviors of Poly (3, 4-ethylenedioxythiophene) (PEDOT) and ITO on Flexible Substrates

B. Sammakia, C. Westgate, J. DeFranco, 2013 .

Geometric modifications to simple microchannel design for enhanced mixing

B. Sammakia, B. Murray, S. Bhopte, 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Design, fabrication and implementation of smart three axis compliant interconnects for ultra-thin chip stacking technology

B. Sammakia, H. Ackler, P. Arunasalam, 2006, 56th Electronic Components and Technology Conference 2006.

Smart Three Axis Compliant (STAC) Interconnect: An Ultra-High Density MEMS Based Interconnect for Wafer-Level Ultra-Thin Die

B. Sammakia, H. Ackler, P. Arunasalam, 2005, Proceedings Electronic Components and Technology, 2005. ECTC '05..

Comparative analysis of two heat spreader designs for a wire bond TBGA package

Satish C. Guttikonda, B. Sammakia, B. Sammakia, 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

Thermal Design Criteria for Extraordinary Performance of Devices Cooled by Microchannel Heat Sink

K. Ghose, B. Sammakia, D. Farnam, 2010 .

Melting characteristics of horizontal ice surfaces in cold saline water

B. Sammakia, B. Gebhart, T. Audunson, 1983 .

Inclined Cavity Effects With Application to Cooling of Biomaterials

B. Sammakia, S. Shrivastava, 2005 .

Two-phase Impingement Cooling using a Trapezoidal Groove Microchannel Heat Sink and Dielectric Coolant HFE 7000

Mohammad I. Tradat, Scott N. Schiffres, B. Sammakia, 2021, 2021 20th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm).

An Experimental Investigation on the Fluid Distribution in a Two-Phase Cooled Rack Under Steady and Transient Information Technology Loads

B. Sammakia, Sadegh Khalili, H. Alissa, 2020 .

Facility Cooling Failure Analysis of Direct Liquid Cooling System in Data Centers

Udaya L. N. Puvvadi, K. Ghose, B. Sammakia, 2017, ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems.

Precision overlay registration of micron sized features on unsupported flexible films

Bahgat Sammakia, Mark D. Poliks, B. Sammakia, 2009, 2009 Flexible Electronics & Displays Conference and Exhibition.

Early detection of Candida albicans biofilms at porous electrodes.

B. Sammakia, C. Ober, O. Sadik, 2013, Analytical biochemistry.

A Numerical Study of the Thermal Performance of a Tape Ball Grid Array (TBGA) Package

Bahgat Sammakia, Sanjeev B. Sathe, B. Sammakia, 2000 .

A study of the thermal characterization of a high — performance flip chip package

B. Sammakia, V. Calmidi, S. Bhopte, 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Publication Guidelines: Final Manuscript Preparation

B. Sammakia, V. Calmidi, S. Bhopte, 2008 .

Thermal enhancements for a thin film chip carrier

B. Sammakia, S. Reynolds, T. Carden, 1992 .

Nanocomposite pastes for thermal and mechanical bonding

Howard Wang, B. Sammakia, Tingting Zhang, 2014, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC).

Solving Thermal Issues in a Three-Dimensional-Stacked-Quad-Core Processor by Microprocessor Floor Planning, Microchannel Cooling, and Insertion of Through-Silicon-Vias

Furat Afram, Bahgat Sammakia, Kanad Ghose, 2013 .

Microfabrication of ultrahigh density wafer-level thin film compliant interconnects for through-silicon-via based chip stacks

B. Sammakia, H. Ackler, P. Arunasalam, 2006 .

Catalytic Reduction of Hexavalent Chromium Using Flexible Nanostructured Poly(amic acids)

B. Sammakia, O. Sadik, V. Lee, 2011 .

Transactions on Components and Packaging Technologies Editors CPMT Transactions Editor-in-Chief

Mehmet Arik, Patrick McCluskey, Bahgat Sammakia, 2009 .

Buoyancy-Induced Flows and Transport

Bahgat Sammakia, Roop L. Mahajan, Yogesh Jaluria, 1988 .

Molecular dynamics study of the influence of aggregation and percolation in Al2O3/polyethylene oxide nanofluids on the effective thermal conductivity

B. Sammakia, B. Poliks, 2020, 2020 IEEE 70th Electronic Components and Technology Conference (ECTC).

Thermal conductivity of amorphous silica using non-equilibrium molecular dynamics simulations

B. Sammakia, G. Subbarayan, S. Mahajan, 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..

An Improved Efficient Network Model for Determining the Effective Thermal Conductivity of Particulate Thermal Interface Materials

B. Sammakia, G. Subbarayan, S. Kanuparthi, 2013 .

Hybrid Nanocomposite Thermal Interface Materials: The Thermal Conductivity and the Packing Density

Howard Wang, B. Sammakia, Zhihao Yang, 2018, Journal of Electronic Packaging.

Acoustic Emission Analysis for Fatigue Prediction of Lap Solder Joints in Mode Two Shear

James Constable, B. Sammakia, J. Constable, 1999, Electronics Manufacturing Issues.

Estimating thermal conductivity of amorphous silica nanoparticles and nanowires using molecular dynamics simulations.

B. Sammakia, G. Subbarayan, S. Mahajan, 2007, Physical review. E, Statistical, nonlinear, and soft matter physics.

Chemical vapor-deposited carbon nanofibers on carbon fabric for supercapacitor electrode applications

B. Sammakia, C. Westgate, G. P. Pandey, 2012, Nanoscale Research Letters.

Simulations of Damage, Crack Initiation, and Propagation in Interlayer Dielectric Structures: Understanding Assembly-Induced Fracture in Dies

B. Sammakia, Hung-Yun Lin, G. Subbarayan, 2012, IEEE Transactions on Device and Materials Reliability.

Hierarchical field compositions for simulations of near-percolation thermal transport in particulate materials

Bahgat Sammakia, M. Rayasam, Ganesh Subbarayan, 2009 .

Bending Fatigue Study of Sputtered ITO on Flexible Substrate

B. Sammakia, B. Sammakia, M. Hamasha, 2011, Journal of Display Technology.

Estimating Kapitza Resistance Between ${\rm Si}\hbox{-}{\rm SiO}_{2}$ Interface Using Molecular Dynamics Simulations

Ganesh Subbarayan, Bahgat G. Sammakia, B. Sammakia, 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Estimating Kapitza resistance between Si-SiO2 interface using molecular dynamics simulations

G. Subbarayan, B. Sammakia, G. Subbarayan, 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Constitutive Relationship Development, Modeling and Measurement of Heat Stressing of Micro-SMD Assembly with Sn3.9Ag0.6Cu SAC Alloy

B. Sammakia, W. Armstrong, L. Nguyen, 2005 .

Transient mixed convection adjacent to a vertical flat surface

V. Carey, B. Sammakia, B. Gebhart, 1982 .

Measurements and calculations of transient mixed convection in air

V. Carey, B. Sammakia, B. Gebhart, 1985 .

TRANSIENT NATURAL CONVECTION ADJACENT TO A VERTICAL FLAT SURFACE: THE THERMAL CAPACITY EFFECT

B. Sammakia, B. Gebhart, 1981 .

TRANSIENT AND STEADY-STATE NUMERICAL SOLUTIONS IN NATURAL CONVECTION

B. Sammakia, B. Gebhart, 1978 .

UNSTEADY NATURAL CONVECTION GENERATED BY A HEATED SURFACE WITHIN AN ENCLOSURE

Bahgat Sammakia, A. Khalilollahi, B. Sammakia, 1986 .

Transient natural convection near a uniform flux surface with appreciable heat capacity

B. Sammakia, A. Khalilollahi, 1988 .

Measurements and calculations of transient natural convection in air

B. Sammakia, B. Gebhart, Z. Qureshi, 1980 .

The Effect of Polydispersivity on the Thermal Conductivity of Particulate Thermal Interface Materials

T. Siegmund, B. Sammakia, G. Subbarayan, 2009, IEEE Transactions on Components and Packaging Technologies.

The Study of the Polydispersivity Effect on the Thermal Conductivity of Particulate Thermal Interface Materials by Finite Element Method

B. Sammakia, G. Subbarayan, S. Kanuparthi, 2013, IEEE Transactions on Components, Packaging and Manufacturing Technology.

The study of the polydispersivity effect on the thermal conductivity of particulate Thermal Interface Materials to refine the Random Network Model

B. Sammakia, G. Subbarayan, S. Kanuparthi, 2012, 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

On refining the parameters of a Random Network Model for determining the effective thermal conductivity of particulate thermal interface materials

B. Sammakia, G. Subbarayan, B. Dan, 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Flexible poly(amic acid) conducting polymers: effect of chemical composition on structural, electrochemical, and mechanical properties.

B. Sammakia, O. Sadik, C. Umbach, 2010, Langmuir : the ACS journal of surfaces and colloids.

Molecular Dynamics simulations of thermal conductivity in composites consisting of aluminum oxide nanoparticles surrounded by polyethylene oxide

B. Sammakia, Cheng Chen, B. Poliks, 2015, 2015 IEEE 65th Electronic Components and Technology Conference (ECTC).

Multi-objective optimization of a chip-attached micro pin fin liquid cooling system

Scott N. Schiffres, B. Sammakia, K. Sikka, 2021 .

Electrochemical measurements of biofilm development using polypyrrole enhanced flexible sensors

J. Turner, B. Sammakia, O. Sadik, 2013 .

Genetic Algorithm based Predictive model for COVID 19 – Theoretical Model based on an evolutionary approach

B. Sammakia, S. Rangarajan, S. Poranki, 2021 .

Predictive model for COVID 19 curve - An evolutionary approach

Bahgat Sammakia, Srikanth Poranki, Srikanth Rangarajan, 2020 .

Modeling of boiling flow in microchannels for nucleation characteristics and performance optimization

Bahgat Sammakia, Siyi Zhou, Xinqiang Xu, 2013 .

Microstructural characteristics influencing the effective thermal conductivity of particulate thermal interface materials

T. Siegmund, B. Sammakia, G. Subbarayan, 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

A Review of Recent Developments in Some Practical Aspects of Air-Cooled Electronic Packages

Bahgat Sammakia, Sanjeev B. Sathe, B. Sammakia, 1998 .

Experimental Characterization of Two-Phase Cold Plates Intended for High-Density Data Center Servers Using a Dielectric Fluid

B. Sammakia, Bharath Ramakrishnan, Sadegh Khalili, 2021 .

Non-Destructive Evaluation of Thermal Interface Materials using Modulated Heating of Selective Cores

Scott N. Schiffres, B. Sammakia, Zechen Zhang, 2022, 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm).

Performance and Reliability Analysis of Hybrid Concentrating Photovoltaic/Thermal Collectors With Tree-Shaped Channel Nets' Cooling System

Cheng Chen, Xinqiang Xu, M. M. Meyers, 2013, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Comparative Analysis of Different Data Center Airflow Management Configurations

Bahgat Sammakia, Madhusudan K. Iyengar, Roger R. Schmidt, 2005 .

Thermal modeling of hybrid concentrating PV/T collectors with tree-shaped channel networks cooling system

Xinqiang Xu, Xinqiang Xu, B. Sammakia, 2012, 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

A Review of Recent Developments in “On-Chip” Embedded Cooling Technologies for Heterogeneous Integrated Applications

Scott N. Schiffres, B. Sammakia, S. Rangarajan, 2023, Engineering.

Thermal performance of a two-phase flat thermosyphon with surface wettability modifications

B. Sammakia, A. Pattamatta, Pallab Sinha Mahapatra, 2021, Applied Thermal Engineering.

Experimental Analysis of Different Measurement Techniques of Server-Rack Airflow Predictions Towards Proper DC Airflow Management

Mohammad I. Tradat, B. Sammakia, Yaman M. Manaserh, 2020, 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

A Design Methodology for Controlling Local Airflow Delivery in Data Centers Using Air Dampers

Bahgat Sammakia, Sadegh Khalili, Ghazal Mohsenian, 2019, 2019 18th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Airflow Management Using Active Air Dampers in Presence of a Dynamic Workload in Data Centers

Kanad Ghose, Bahgat Sammakia, Sadegh Khalili, 2019, 2019 35th Semiconductor Thermal Measurement, Modeling and Management Symposium (SEMI-THERM).

A novel alternate approach for multiscale thermal transport using diffusion in the Boltzmann Transport Equation

Bahgat Sammakia, Bruce T. Murray, James F. Geer, 2011 .

Geometric Optimization of an Impinging Cold-Plate with a Trapezoidal Groove Used for Warm Water Cooling

Reza Pejman, Bharath Ramakrishnan, Yaser Hadad, 2018, 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Selective laser melting of metal structures onto graphite substrates via a low melting point interlayer alloy

Scott N. Schiffres, B. Sammakia, Arad Azizi, 2022, Applied Materials Today.

Multiscale thermal device modeling using diffusion in the Boltzmann Transport Equation

Bahgat Sammakia, Bruce T. Murray, James F. Geer, 2013 .

Sub-continuum thermal transport modeling using diffusion in the Lattice Boltzmann Transport Equation

B. Sammakia, J. Geer, Cheng Chen, 2014 .

A dynamic compact thermal model for data center analysis and control using the zonal method and artificial neural networks

Bahgat Sammakia, Bruce T. Murray, Zhihang Song, 2014 .

Comparative Analysis of Microchannel Heat Sink Configurations Subject to a Pressure Constraint

Bahgat Sammakia, Kanad Ghose, Dylan Farnam, 2009 .

A Review of Recent Advances in Thermal Management in Three Dimensional Chip Stacks in Electronic Systems

Bahgat Sammakia, Krishnaswami Srihari, Daryl Santos, 2011 .

Numerical study of a novel passive micromixer design

B. Sammakia, B. Murray, S. Bhopte, 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Cooling of microelectronic and nanoelectronic equipment : advances and emerging research

B. Sammakia, M. Iyengar, K. Geisler, 2014 .

Comparative Analysis of Different In Row Cooler Management Configurations in a Hybrid Cooling Data Center

Bahgat Sammakia, Bruce T. Murray, Roger R. Schmidt, 2015 .

Innovative approaches of experimentally guided CFD modeling for data centers

B. Sammakia, R. Schmidt, K. Ghose, 2015, 2015 31st Thermal Measurement, Modeling & Management Symposium (SEMI-THERM).

Airflow and temperature distribution optimization in data centers using artificial neural networks

Bahgat Sammakia, Bruce T. Murray, Zhihang Song, 2013 .

An Analytical Study of the Optimized Performance of an Impingement Heat Sink

Bahgat Sammakia, S. B. Sathe, B. Sammakia, 2004 .

Numerical modeling and optimization of a V-groove warm water cold-plate

B. Sammakia, P. Chiarot, S. Alkharabsheh, 2017, 2017 33rd Thermal Measurement, Modeling & Management Symposium (SEMI-THERM).

Performance Analysis of a Combination System of Concentrating Photovoltaic/Thermal Collector and Thermoelectric Generators

Bahgat Sammakia, Bruce T. Murray, Siyi Zhou, 2014 .

Thermal Modeling and Life Prediction of Water-Cooled Hybrid Concentrating Photovoltaic/Thermal Collectors

Bahgat Sammakia, Bruce T. Murray, Mark Marshall Meyers, 2013 .

Optimization Study for a Parallel Plate Impingement Heat Sink

Bahgat Sammakia, K. Srihari, K. Ramakrishna, 2006 .

A porous elastic model for bacterial biofilms: application to the simulation of deformation of bacterial biofilms under microfluidic jet impingement.

B. Sammakia, D. Homentcovschi, D. Farnam, 2012, Journal of biomechanical engineering.

Spatial Thermal Conductivity Variation of Particulate-Filled Thermal Interface Materials

Scott N. Schiffres, B. Sammakia, Matthias A. Daeumer, 2022, 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm).

Cross Flow Heat Exchanger Modeling of Transient Temperature Input Conditions

Bruce T. Murray, Tianyi Gao, Alfonso Ortega, 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Latency-Aware Dynamic Server and Cooling Capacity Provisioner for Data Centers

Kanad Ghose, Udaya Puvvadi, Anuroop Desu, 2021, SoCC.

Chip to Facility Ramifications of Containment Solution on IT Airflow and Uptime

Roger R. Schmidt, Kourosh Nemati, Bahgat G. Sammakia, 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Dynamic Analysis of Cross Flow Heat Exchangers in Data Centers Using Transient Effectiveness Method

Alfonso Ortega, Tianyi Gao, James F. Geer, 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Dynamic response and control analysis of cross flow heat exchangers under variable temperature and flow rate conditions

Bahgat Sammakia, Tianyi Gao, James F. Geer, 2015 .

Multi-objective optimization of 3D printed liquid cooled heat sink with guide vanes for targeting hotspots in high heat flux electronics

Mohammad I. Tradat, B. Sammakia, Yaman M. Manaserh, 2021, International Journal of Heat and Mass Transfer.

Performance Analysis of Impinging Chip-Attached Micro Pin Fin Direct Liquid Cooling Package for Hotspot Targeted Applications

Scott N. Schiffres, B. Sammakia, Arad Azizi, 2021, 2021 20th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm).

Direct Micro-Pin Jet Impingement Cooling for High Heat Flux Applications

Scott N. Schiffres, B. Sammakia, K. Sikka, 2020, 2020 36th Semiconductor Thermal Measurement, Modeling & Management Symposium (SEMI-THERM).

Thermal management roadmap: Cooling electronic products from hand-held dvices to supercomputers

Suresh V. Garimella, Suresh V. Garimella, Bahgat Sammakia, 2003 .

Thermal challenges in next generation electronic systems - summary of panel presentations and discussions

Suresh V. Garimella, Bahgat Sammakia, Martine Baelmans, 2002 .

Shifting to energy efficient hybrid cooled data centers using novel embedded floor tiles heat exchangers

Mohammad I. Tradat, B. Sammakia, Yaman M. Manaserh, 2021, Energy Conversion and Management.

Supervised Machine-Learning Approach for the Optimal Arrangement of Active Hotspots in 3-D Integrated Circuits

Srikanth Rangarajan, Bahgat Sammakia, Leila Choobineh, 2021, IEEE Transactions on Components, Packaging and Manufacturing Technology.

Experimental and numerical dynamic investigation of an energy efficient liquid cooled chiller-less data center test facility

Roger R. Schmidt, Tianyi Gao, Milnes P. David, 2015 .

Effects of Different Coolants on the Cooling Performance of an Impingement Microchannel Cold Plate

Scott N. Schiffres, B. Sammakia, K. Sikka, 2021, 2021 37th Semiconductor Thermal Measurement, Modeling & Management Symposium (SEMI-THERM).

A novel integrated fuzzy control system toward automated local airflow management in data centers

Srikanth Rangarajan, Bahgat Sammakia, Kanad Ghose, 2021, Control Engineering Practice.

Dynamic models for server rack and CRAH in a room level CFD model of a data center

Sami Alkharabsheh, Bahgat Sammakia, Roger Schmidt, 2014, Fourteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Experimental characterization of pressure drop in a server rack

Sami Alkharabsheh, Bahgat Sammakia, Bruce Murray, 2014, Fourteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Thermal mass characterization of a server at different fan speeds

M. Ibrahim, S. Shrivastava, B. Sammakia, 2012, 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Characterization of a Server Thermal Mass Using Experimental Measurements

Mahmoud Ibrahim, Furat Afram, Bahgat Sammakia, 2011 .

Effect of Thermal Characteristics of Electronic Enclosures on Dynamic Data Center Performance

Mahmoud Ibrahim, Bahgat Sammakia, Bruce T. Murray, 2010 .

Minimizing Temperature Nonuniformity by Optimal Arrangement of Hotspots in Vertically Stacked Three-Dimensional Integrated Circuits

Srikanth Rangarajan, Bahgat Sammakia, Bahgat Sammakia, 2020 .

Heat Conduction in Multilayered Rectangular Domains

Bahgat Sammakia, James F. Geer, B. Sammakia, 2007 .

Hot spot mitigation using single-phase microchannel cooling for microprocessors

Gamal Refai-Ahmed, B. Sammakia, Dereje Agonafer, 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Development of a Microfluidic Based Electrochemical Cell for Analyzing Bacterial Biofilms

J. Turner, B. Sammakia, D. Davies, 2016 .

Impact of Fin Geometry and Surface Roughness on Performance of an Impingement Two-phase Cooling Heat Sink

Scott N. Schiffres, B. Sammakia, K. Sikka, 2021 .

Multi-objective optimization of temperature distributions using Artificial Neural Networks

Zhihang Song, B. Sammakia, B. T. Murray, 2012, 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Multiscale modeling of Thermoelectric Generators for conversion performance enhancement

B. Sammakia, Siyi Zhou, P. Borgesen, 2015 .

Thermal Analysis of Cold Plate for Direct Liquid Cooling of High Performance Servers

B. Sammakia, P. Chiarot, S. Alkharabsheh, 2019, Journal of Electronic Packaging.

Transient power analysis to estimate the thermal time lag of a microprocessor hot spot

Kanad Ghose, Bahgat Sammakia, Anjali Chauhan, 2015, 2015 31st Thermal Measurement, Modeling & Management Symposium (SEMI-THERM).

Analysing real time power of the microprocessor to estimate thermal time constant of the hotspot

B. Sammakia, D. Agonafer, A. Chauhan, 2012, 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

Development and verification of compact transient heat exchanger models using transient effectiveness methodologies

Bahgat Sammakia, Tianyi Gao, James F. Geer, 2015 .