P. Coddet

发表

Study of Proton Exchange Membrane Fuel Cell safety procedures in case of emergency shutdown

M.-C. Pera, P. Coddet, D. Candusso, 2007, 2007 IEEE International Symposium on Industrial Electronics.

Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior

Bo Song, Christian Coddet, H. Liao, 2014 .

YSZ/GDC bilayer and gradient barrier layers deposited by reactive magnetron sputtering for solid oxide cells

P. Coddet, A. Thomann, A. Caillard, 2019, Surface and Coatings Technology.

Characteristics and properties of a magnetron sputtered gadolinia-doped ceria barrier layer for solid oxide electrochemical cells

P. Coddet, C. Richard, A. Thomann, 2018 .

On the mechanical and electrical properties of copper-silver and copper-silver-zirconium alloys deposits manufactured by cold spray

P. Coddet, C. Coddet, F. Debray, 2016 .

Effect of cold work, second phase precipitation and heat treatments on the mechanical properties of copper–silver alloys manufactured by cold spray

P. Coddet, C. Coddet, F. Debray, 2015 .

Comparison of the Properties of Cold-Sprayed Cu-0.5Cr-0.05Zr Alloys after Various Heat Treatments Versus Forged and Vacuum Plasma-Sprayed Alloys

P. Coddet, C. Coddet, F. Debray, 2014, Journal of Thermal Spray Technology.

Optimized magnetron sputtering process for the deposition of gadolinia doped ceria layers with controlled structural properties

P. Coddet, A. Thomann, A. Caillard, 2020, Surface and Coatings Technology.

A review on high power SOFC electrolyte layer manufacturing using thermal spray and physical vapour deposition technologies

H. Liao, P. Coddet, C. Coddet, 2014 .

Femtosecond laser irradiation of titanium oxide thin films: accumulation effect under IR beam

P. Coddet, N. Semmar, A. Thomann, 2020 .

Cold gas dynamic spraying of a novel micro-alloyed copper: Microstructure, mechanical properties

H. Liao, P. Coddet, C. Coddet, 2016 .

The effect of heat treatment on microstructure and tensile properties of cold spray Zr base metal glass/Cu composite

H. Liao, P. Coddet, C. Coddet, 2015 .

Multistep magnetron sputtering process and in-situ heat treatment to manufacture thick, fully oxidized and well crystallized YSZ films

P. Coddet, C. Richard, A. Thomann, 2018, Surface and Coatings Technology.

Wear behavior and microstructure of hypereutectic Al-Si alloys prepared by selective laser melting

H. Liao, P. Coddet, C. Coddet, 2016 .

On the elastic modulus and hardness of co-sputtered Zr-Cu-(N) thin metal glass films

P. Coddet, C. Coddet, F. Sanchette, 2012 .

Effects of laser remelting process on the microstructure, roughness and microhardness of in-situ cold sprayed hypoeutectic Al-Si coating

H. Liao, P. Coddet, C. Coddet, 2017 .

Fabrication and microstructure characterization of selective laser‐melted FeAl intermetallic parts

H. Liao, P. Coddet, C. Coddet, 2012 .

On the microstructure, hardness and wear behavior of Al-Fe-Cr quasicrystal reinforced Al matrix composite prepared by selective laser melting

H. Liao, P. Coddet, C. Coddet, 2017 .

In-situ TiB/near α Ti matrix composites manufactured by selective laser melting

H. Liao, P. Coddet, C. Coddet, 2016 .

Mechanical properties of thick 304L stainless steel deposits processed by He cold spray

P. Coddet, C. Coddet, F. Debray, 2015 .

Mechanical Properties of Cu-0.1Ag Alloys Deposited by Cold Spray with Various Powder Feed Rate and Heat Treatment

P. Coddet, C. Coddet, F. Debray, 2014, Journal of Thermal Spray Technology.

Mechanical properties of Cold Spray deposited NARloy-Z copper alloy

P. Coddet, C. Coddet, F. Debray, 2013 .

Microstructure and wear behavior of in-situ hypereutectic Al–high Si alloys produced by selective laser melting

H. Liao, P. Coddet, C. Coddet, 2016 .

A novel approach to in-situ produce functionally graded silicon matrix composite materials by selective laser melting

H. Liao, P. Coddet, C. Coddet, 2017 .

On the texture, phase and tensile properties of commercially pure Ti produced via selective laser melting assisted by static magnetic field.

Christian Coddet, Zhongming Ren, Hao Yuan, 2017, Materials science & engineering. C, Materials for biological applications.

Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting

H. Liao, P. Coddet, C. Coddet, 2013 .

Reactive co-sputter deposition of YSZ coatings using plasma emission monitoring

M. Péra, P. Coddet, A. Billard, 2011 .

Microstructure and strength analysis of eutectic Al-Si alloy in-situ manufactured using selective laser melting from elemental powder mixture

H. Liao, P. Coddet, C. Coddet, 2017 .

Macrosegregation mechanism of primary silicon phase in selective laser melting hypereutectic Al – High Si alloy

H. Liao, P. Coddet, C. Coddet, 2016 .

Characterization of the microstructure of a selective laser melting processed Al-50Si alloy: Effect of heat treatments

H. Liao, P. Coddet, C. Coddet, 2017 .

Comparative study of laser induced periodic surface structures formed on pulsed laser deposited and magnetron sputtered titanium oxide films

G. O'Connor, P. Coddet, N. Semmar, 2019, Applied Surface Science.

Nb and Cu co-doped (La,Sr)(Co,Fe)O3: a stable electrode for solid oxide cells

P. Coddet, C. Autret-Lambert, H. Guesmi, 2021, RSC advances.

Planar Solid Oxide Fuel Cell: Electrolyte Deposited by Reactive Magnetron Sputtering and Cell Test

M. Péra, P. Coddet, A. Billard, 2011 .

Effects of test temperature on the ball-on-slab wear behavior of nickel-titanium shape memory alloys fabricated by laser powder bed fusion

P. Coddet, M. El Mansori, Xianghui Huang, 2024, Tribology International.