Qing Zhang

发表

Effect of Surface Microstructures on the Infrared Emissivity of Graphite

Lai-fei Cheng, Litong Zhang, Fuyuan Wang, 2014 .

Thermal expansion behavior of carbon fiber reinforced chemical-vapor-infiltrated silicon carbide composites from room temperature to 1400 °C

Lai-fei Cheng, Litong Zhang, Yongdong Xu, 2006 .

Surface-micromachined silicon carbide structures and their application for microsystems

Qing Zhang, 2014 .

Adjusting the Morphology and Properties of SiC Nanowires by Catalyst Control

Lai-fei Cheng, Qing Zhang, F. Ye, 2020, Materials.

Comparison of oxidation behaviors of 3D C/PyC/SiC and SiC/PyC/SiC composites in an O2-Ar atmosphere

Lai-fei Cheng, Litong Zhang, Yongdong Xu, 2006 .

Adjusting the Morphology and Properties of SiC Nanowires by Catalyst Control

Lai-fei Cheng, Qing Zhang, F. Ye, 2020, Materials.

Picosecond laser machining of deep holes in silicon infiltrated silicon carbide ceramics

Litong Zhang, Qing Zhang, Yongsheng Liu, 2015, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Effect of energy density and feeding speed on micro-holes drilling in SiC/SiC composites by picosecond laser

Lai-fei Cheng, Litong Zhang, Qing Zhang, 2014, The International Journal of Advanced Manufacturing Technology.

Ultra-short pulse laser deep drilling of C/SiC composites in air

Litong Zhang, Qing Zhang, Yongsheng Liu, 2013 .

Oxidation behaviors and mechanisms of CVD Si-B-C ceramic in wet oxygen from 700 °C to 1400 °C

Lai-fei Cheng, Litong Zhang, Qing Zhang, 2016 .

Effect of SiC coating and heat treatment on damping behavior of C/SiC composites

Lai-fei Cheng, Litong Zhang, Yongdong Xu, 2008 .

Microstructure and chemical bond evolution of diamond-like carbon films machined by femtosecond laser

Lai-fei Cheng, Qing Zhang, Xiaojun Yang, 2015 .

Microstructure, mechanical, wave-transparent and heat insulation properties of Si3N4 foam ceramic by organic foam impregnation combined with CVI

Lai-fei Cheng, Qing Zhang, F. Ye, 2023, Journal of Materials Research and Technology.

Microstructure and mechanical properties of Cf/SiC composites with dispersed C-SiC interphase prepared by chemical vapor infiltration

Lai-fei Cheng, Litong Zhang, Qing Zhang, 2023, Composites Part A: Applied Science and Manufacturing.

Effect of heat transfer channels on thermal conductivity of silicon carbide composites reinforced with pitch-based carbon fibers

Qing Zhang, Yongsheng Liu, Yejie Cao, 2021, Journal of the European Ceramic Society.

Electromagnetic wave-transparent porous silicon nitride ceramic prepared by gel-casting combined with in-situ nitridation reaction

Lai-fei Cheng, Jie Zhou, Qing Zhang, 2021, Journal of the European Ceramic Society.

Degradation mechanisms of a self-healing SiC(f)/BN(i)/[SiC-B4C](m) composite at high temperature under different oxidizing atmospheres

Lai-fei Cheng, Qing Zhang, R. Riedel, 2018, Journal of the European Ceramic Society.

Enhanced densification and mechanical properties of carbon fiber reinforced silicon carbide matrix composites via laser machining aided chemical vapor infiltration

Lai-fei Cheng, Litong Zhang, Qing Zhang, 2017 .

Increasing the strength and toughness of a carbon fiber/silicon carbide composite by heat treatment

Lai-fei Cheng, H. Mei, Qing Zhang, 2013 .

Effects of flexural fatigue cycles on the internal friction behavior of SiCnws-C/C composites

Q. Fu, Qing Zhang, Xin-Min Yu, 2019, Ceramics International.

Effect of SiC coating and heat treatment on the thermal radiation properties of C/SiC composites

Lai-fei Cheng, Litong Zhang, Fuyuan Wang, 2014 .

Oxidation protection of C/C composites: Coating development with thermally stabile SiC@PyC nanowires and an interlocking TaB2-SiC structure

Q. Fu, Qing Zhang, Ningning Yan, 2019, Corrosion Science.

Long-term ceramic matrix composite for aeroengine

Lai-fei Cheng, Qing Zhang, Yongsheng Liu, 2022, Journal of Advanced Ceramics.

Effect of surface morphology and densification on the infrared emissivity of C/SiC composites

Lai-fei Cheng, Litong Zhang, Fuyuan Wang, 2014 .

Flexible SiC-CNTs hybrid fiber mats for tunable and broadband microwave absorption

Lai-fei Cheng, Qing Zhang, Yani Zhang, 2020 .

Microstructure and mechanical properties of quasi-isotropic chopped fiber-reinforced PyC–SiC matrix composite prepared by novel nondamaging method

Zeshui Xu, Lai-fei Cheng, Qing Zhang, 2021, Ceramics International.

The mechanical, thermophysical and electromagnetic properties of UD SiCf/SiC composites in different directions

Lai-fei Cheng, Litong Zhang, Qing Zhang, 2022, Journal of the European Ceramic Society.

Effect of heat treatment on the thermal expansion of 2D and 3D C/SiC composites from room temperature to 1400 °C

Lai-fei Cheng, Litong Zhang, Yongdong Xu, 2003 .

Effects of Interphase Thickness on Damping Behavior of 2D C/SiC Composites

Lai-fei Cheng, Litong Zhang, Yongdong Xu, 2007 .

Effect of energy density and feeding speed on micro-holes drilling in SiC/SiC composites by picosecond laser

Lai-fei Cheng, Qing Zhang, Xiaojun Yang, 2016 .

Improvement on the thermal conductivity of Diamond/CVI-SiC composites using large diamond particles

Lai-fei Cheng, Litong Zhang, Qing Zhang, 2017 .

Construction of continuous heat conductive channel, a double harvest strategy to enhance thermal conductance and bending strength of C/SiC composites

Qing Zhang, Yongsheng Liu, Yejie Cao, 2021, Journal of Materials Science & Technology.

Effect of energy density on the machining character of C/SiC composites by picosecond laser

Lai-fei Cheng, Litong Zhang, Qing Zhang, 2014 .

Effects of heat treatment and coatings on the infrared emissivity properties of carbon fibers

Lai-fei Cheng, Litong Zhang, Fuyuan Wang, 2014 .

Thermophysical and mechanical properties of a three- dimensional Hi-Nicalon/SiC composite

Lai-fei Cheng, Litong Zhang, Yongdong Xu, 2006 .

Oxidation behavior of 3D Hi–Nicalon/SiC composite

Lai-fei Cheng, Litong Zhang, Yongdong Xu, 2006 .

Dielectric and microwave absorption properties of polymer‐derived TiC/SiC/SiOC multiphase ceramics in X band

Lai-fei Cheng, Litong Zhang, Qing Zhang, 2021, International Journal of Applied Ceramic Technology.

Non-Destruction Evaluation Method for Long-Term Oxidation Behavior of SiC/SiC Composites with Different Preforms in Wet Oxygen

Lai-fei Cheng, Qing Zhang, X. Luan, 2022, Materials.

Nonuniform load distribution of two-dimensional C/SiC z-pinned joints with four pins in a rectangular array prepared via chemical vapor infiltration

Litong Zhang, Qing Zhang, XuQin Li, 2023, Journal of Materials Research and Technology.