C. Wen

发表

A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces.

Sepideh Minagar, C. Berndt, James Wang, 2012, Acta biomaterialia.

A review of high energy density lithium–air battery technology

C. Wen, M. A. Rahman, Xiaojiang Wang, 2013, Journal of Applied Electrochemistry.

Biocompatibility of transition metal-substituted cobalt ferrite nanoparticles

C. Berndt, James Wang, C. Wen, 2014, Journal of Nanoparticle Research.

Influence of Heat Treatments on Microstructure and Mechanical Properties of Ti–26Nb Alloy Elaborated In Situ by Laser Additive Manufacturing with Ti and Nb Mixed Powder

Cuie Wen, Jianguo Lin, C. Wen, 2018, Materials.

Investigation and modeling of flank wear process of different PCD tools in cutting titanium alloy Ti6Al4V

S. Ding, C. Wen, G. Li, 2018 .

The importance of particle size in porous titanium and nonporous counterparts for surface energy and its impact on apatite formation.

C. Wen, Xiaobo Chen, Yun-cang Li, 2009, Acta biomaterialia.

Energy absorption and crushing behaviour of foam-filled aluminium tubes

Cuie Wen, Yasuo Yamada, C. Wen, 2005 .

Preparation and electrochemical properties of high capacity silicon-based composites for lithium-ion batteries

C. Wen, Bo Ding, Zishan Ahsan, 2020 .

Experimental investigation of the mechanical behavior of aluminum honeycombs under quasi-static and dynamic indentation

Guoxing Lu, Dong Ruan, Cuie Wen, 2015 .

A new look at biomedical Ti-based shape memory alloys.

James Wang, C. Wen, Arne Biesiekierski, 2012, Acta biomaterialia.

Biocompatibility of TiO2 nanotubes with different topographies.

C. Wen, Yuncang Li, P. Hodgson, 2014, Journal of biomedical materials research. Part A.

The manufacturing and the application of polycrystalline diamond tools – A comprehensive review

S. Ding, C. Wen, G. Li, 2020 .

High Energy Density Metal-Air Batteries: A Review

Cuie Wen, C. Wen, M. A. Rahman, 2013 .

Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review

Songlin Ding, Cuie Wen, Li Yuan, 2018, Bioactive materials.

Bioactive Materials

Cuie Wen, C. Wen, K. Munir, 2017 .

Machinablility of titanium matrix composites (TMC) reinforced with multi-walled carbon nanotubes

S. Ding, C. Wen, Yuncang Li, 2020 .

Zirconium, calcium, and strontium contents in magnesium based biodegradable alloys modulate the efficiency of implant-induced osseointegration

C. Wen, Yuncang Li, P. Hodgson, 2013, International journal of nanomedicine.

Effects of cell geometry on the Compressive properties of nickel foams

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2000 .

Effects of heat treatment on the compressive properties of AZ91 Mg foam

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2000 .

Metallic scaffolds manufactured by selective laser melting for biomedical applications

Cuie Wen, Khurram Munir, Yuncang Li, 2017 .

Laser-Assisted Additive Manufacturing for Metallic Biomedical Scaffolds

C. Wen, S. Masood, S. H. Riza, 2014 .

Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives

C. Wen, Yuncang Li, H. Kabir, 2020, Bioactive materials.

Crushing Modes of Aluminium Tubes under Axial Compression

C. Wen, Wenyi Yan, F. Pled, 2014, 1408.5390.

Crushing simulation of foam-filled aluminium tubes

Wenyi Yan, Cuie Wen, Emilien Durif, 2007 .

Mechanical testing of metallic biomaterials

C. Wen, Yuncang Li, Arne Biesiekierski, 2020, Metallic Biomaterials Processing and Medical Device Manufacturing.

High strength porous PLA gyroid scaffolds manufactured via fused deposition modeling for tissue-engineering applications

C. Wen, Yuncang Li, M. Alizadeh-Osgouei, 2021 .

A comprehensive review of biodegradable synthetic polymer-ceramic composites and their manufacture for biomedical applications

C. Wen, Yuncang Li, M. Alizadeh-Osgouei, 2018, Bioactive materials.

Ferromagnetism in Compression Stressed Transitional Bulk Nanostructured FE50AL50 Alloy

C. Wen, Yuncang Li, P. Hodgson, 2012, WCE 2012.

Individual layer thickness-dependent microstructures and mechanical properties of fcc/fcc Ni/Al nanolaminates and their strengthening mechanisms

C. Wen, Yuncang Li, M. Nasim, 2019, Materialia.

Carbon Nanotube Reinforced Titanium Metal Matrix Composites Prepared by Powder Metallurgy—A Review

C. Wen, P. Kingshott, K. Munir, 2015 .

Metal scaffolds processed by electron beam melting for biomedical applications

C. Wen, Yuncang Li, G. Song, 2017 .

In Vitro Degradation Behaviors of Manganese-Calcium Phosphate Coatings on an Mg-Ca-Zn Alloy

C. Wen, Yingchao Su, Guangyu Li, 2018, Scanning.

The influence of strain rate, deformation temperature and stacking fault energy on the mechanical properties of Cu alloys

C. Wen, X. Zhu, Xiaoxiang Wu, 2013 .

Extraordinary high strength Ti-Zr-Ta alloys through nanoscaled, dual-cubic spinodal reinforcement.

C. Wen, Yuncang Li, Arne Biesiekierski, 2017, Acta biomaterialia.

Wear Mechanism and Modeling of Tribological Behavior of Polycrystalline Diamond Tools When Cutting Ti6Al4V

S. Ding, C. Wen, G. Li, 2018, Journal of Manufacturing Science and Engineering.

Mechanical properties, corrosion, and biocompatibility of Mg-Zr-Sr-Dy alloys for biodegradable implant applications.

Yunfei Ding, C. Wen, Yuncang Li, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Structural and mechanical properties of magnetron-sputtered Al–Au thin films

C. Berndt, James Wang, C. Wen, 2016 .

Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid

C. Wen, Yuncang Li, A. Nouri, 2008, Biotechnology and bioengineering.

Effect of heat-treatment atmosphere on the bond strength of apatite layer on Ti substrate.

C. Wen, Yuncang Li, Jianguo Lin, 2008, Dental materials : official publication of the Academy of Dental Materials.

Apatite-inducing ability of titanium oxide layer on titanium surface: The effect of surface energy

X. J. Wang, X. J. Wang, Y. C. Li, 2008 .

Magnesium matrix nanocomposites for orthopedic applications: A review from mechanical, corrosion, and biological perspectives.

C. Wen, Yuncang Li, K. Munir, 2019, Acta biomaterialia.

Nanogravel structured NiO/Ni foam as electrode for high-performance lithium-ion batteries

C. Wen, M. A. Rahman, 2015, Ionics.

Multifunctional Spinel Ferrite Nanoparticles for Biomedical Application

C. Berndt, James Wang, C. Wen, 2015 .

Antibacterial properties of spinel ferrite nanoparticles

C. Berndt, James Wang, C. Wen, 2013 .

Phase transformation in oil-quenched Ni–21.2Al–20Fe alloy

C. Wen, S. Gu, Z. C. Zhou, 2011 .

Impact Response and Energy Absorption of Aluminium Foam-Filled Tubes

Peter Hodgson, Cuie Wen, Chunhui Yang, 2012 .

Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids

Cuie Wen, Peter Hodgson, Yuncang Li, 2009 .

In vitro behavior of human osteoblast-like cells (SaOS2) cultured on surface modified titanium and titanium–zirconium alloy

C. Wen, Yuncang Li, Xiaobo Chen, 2011 .

Nanohydroxyapatite coating on a titanium-niobium alloy by a hydrothermal process.

C. Wen, Yuncang Li, P. Hodgson, 2010, Acta biomaterialia.

Cell response of anodized nanotubes on titanium and titanium alloys.

Sepideh Minagar, C. Berndt, James Wang, 2013, Journal of biomedical materials research. Part A.

In Vitro Cytotoxicity of Binary Ti Alloys for Bone Implants

Cynthia S. Wong, C. Wen, P. Hodgson, 2009 .

The bioactivity and bone cell attachment of nanotubular layers anodized in aqueous and nonaqueous electrolytes

Sepideh Minagar, C. Berndt, C. Wen, 2017 .

A review of the physiological impact of rare earth elements and their uses in biomedical Mg alloys.

M. Dargusch, C. Wen, Yuncang Li, 2021, Acta biomaterialia.

In vitro and in vivo assessment of the effect of biodegradable magnesium alloys on osteogenesis.

C. Wen, Yuncang Li, Ding Li, 2021, Acta biomaterialia.

Corrosion protection of mesoporous bioactive glass coating on biodegradable magnesium

C. Wen, Xiaojian Wang, 2014 .

Length-scale dependent deformation, strengthening, and ductility of fcc/fcc Ni/Al nanolaminates using micropillar compression testing

C. Wen, Yuncang Li, M. Nasim, 2020 .

High-strength Ni/Al nanolaminates fabricated by magnetron sputtering and their nanoindentation and nanowear behaviors

C. Wen, Yuncang Li, M. Wen, 2019, Materialia.

A review of high-strength nanolaminates and evaluation of their properties

C. Wen, Yuncang Li, M. Wen, 2020 .

Exploring the Role of Manganese on the Microstructure, Mechanical Properties, Biodegradability, and Biocompatibility of Porous Iron-Based Scaffolds.

M. Dargusch, C. Wen, M. Shahbazi, 2019, ACS biomaterials science & engineering.

Effects of the addition of lanthanum and ultrasonic stirring on the microstructure and mechanical properties of the in situ Mg2Si/Al composites

C. Wen, Jixing Lin, Zheng Liu, 2016 .

Effects of zirconium and strontium on the biocorrosion of Mg-Zr-Sr alloys for biodegradable implant applications.

Yunfei Ding, C. Wen, Yuncang Li, 2015, Journal of materials chemistry. B.

Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: a review.

Yunfei Ding, C. Wen, Yuncang Li, 2014, Journal of materials chemistry. B.

Superplasticity and cavitation of recycled AZ31 magnesium alloy fabricated by solid recycling process

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2002 .

Corrosion and mechanical properties of recycled 5083 aluminum alloy by solid state recycling

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2003 .

Forging characteristics of AZ31 Mg alloy.

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2001 .

Improvement of corrosion resistance of H59 brass through fabricating superhydrophobic surface using laser ablation and heating treatment

Zhihui Zhang, C. Wen, Yuncang Li, 2020 .

Effect of thermomechanical treatment on the mechanical and microstructural evolution of a β-type Ti-40.7Zr–24.8Nb alloy

C. Wen, Yuncang Li, Jixing Lin, 2019, Bioactive materials.

Improving the strengthening efficiency of carbon nanotubes in titanium metal matrix composites

C. Wen, Yuncang Li, Deliang Zhang, 2017 .

A biodegradable Fe/Zn-3Cu composite with requisite properties for orthopedic applications.

C. Wen, Yuncang Li, Sheng-Bing Huang, 2022, Acta biomaterialia.

Mg-based metallic glass / titanium interpenetrating phase composite with high mechanical performance

C. Wen, P. Hodgson, Z. Hu, 2009 .

Mechanical, corrosion, nanotribological, and biocompatibility properties of equal channel angular pressed Ti-28Nb-35.4Zr alloys for biomedical applications.

C. Wen, Yuncang Li, K. Munir, 2022, Acta biomaterialia.

Mechanical and corrosion properties of graphene nanoplatelet–reinforced Mg–Zr and Mg–Zr–Zn matrix nanocomposites for biomedical applications

C. Wen, Yuncang Li, K. Munir, 2021 .

Microstructure, mechanical and corrosion properties of hot-pressed graphene nanoplatelets-reinforced Mg matrix nanocomposites for biomedical applications

C. Wen, Yuncang Li, K. Munir, 2021 .

Impact of rare earth elements on nanohardness and nanowear properties of beta-type Ti-24Nb-38Zr-2Mo alloy for medical applications

C. Wen, Yuncang Li, Arne Biesiekierski, 2020 .

Novel Ti-Ta-Hf-Zr alloys with promising mechanical properties for prospective stent applications

C. Wen, Yuncang Li, Jixing Lin, 2016, Scientific Reports.

Zinc phosphate, zinc oxide, and their dual-phase coatings on pure Zn foam with good corrosion resistance, cytocompatibility, and antibacterial ability for potential biodegradable bone-implant applications

C. Wen, Yuncang Li, Tianhong Zhou, 2022, Chemical Engineering Journal.

Microstructure and mechanical properties of carbon nanotubes reinforced titanium matrix composites fabricated via spark plasma sintering

C. Wen, Yuncang Li, Deliang Zhang, 2017 .

Effect of dispersion method on the deterioration, interfacial interactions and re-agglomeration of carbon nanotubes in titanium metal matrix composites

C. Wen, Yuncang Li, M. Qian, 2015 .

Titanium alloys

C. Wen, Yuncang Li, Arne Biesiekierski, 2021, Structural Biomaterials.

The Mechanical Properties and In Vitro Biocompatibility of PM-Fabricated Ti-28Nb-35.4Zr Alloy for Orthopedic Implant Applications

Xin Lu, C. Wen, Wei Xu, 2018, Materials.

Biodegradable Zn–3Cu and Zn–3Cu–0.2Ti alloys with ultrahigh ductility and antibacterial ability for orthopedic applications

M. Dargusch, C. Wen, Yuncang Li, 2021 .

Biodegradable Zn-3Mg-0.7Mg2Si composite fabricated by high-pressure solidification for bone implant applications.

M. Dargusch, C. Wen, Yuncang Li, 2021, Acta biomaterialia.

Biodegradable alloys

C. Wen, Yuncang Li, Arne Biesiekierski, 2021, Structural Biomaterials.

Microstructure, mechanical properties, biocompatibility, and in vitro corrosion and degradation behavior of a new Zn-5Ge alloy for biodegradable implant materials.

C. Wen, Yuncang Li, Dechuang Zhang, 2018, Acta biomaterialia.

A review on hybrid nanolaminate materials synthesized by deposition techniques for energy storage applications

C. Berndt, James Wang, C. Wen, 2014 .

Processing and Characterization of SrTiO₃-TiO₂ Nanoparticle-Nanotube Heterostructures on Titanium for Biomedical Applications.

C. Wen, Yuncang Li, Yu Wang, 2015, ACS applied materials & interfaces.

Cell biological responses of osteoblasts on anodized nanotubular surface of a titanium-zirconium alloy.

C. Wen, Yuncang Li, A. Nouri, 2013, Journal of biomedical materials research. Part A.

Role of Process Control Agent in the Synthesis of Multi‐Walled Carbon Nanotubes Reinforced Titanium Metal Matrix Powder Mixtures

C. Wen, K. Munir, D. Oldfield, 2016 .

Identifying and understanding the effect of milling energy on the synthesis of carbon nanotubes reinforced titanium metal matrix composites

C. Wen, Yuncang Li, M. Qian, 2016 .

Collagen type-I leads to in vivo matrix mineralization and secondary stabilization of Mg-Zr-Ca alloy implants.

C. Wen, Yuncang Li, J. M. Kumar, 2014, Colloids and surfaces. B, Biointerfaces.

Effect of relaxation on pressure sensitivity index in a Zr-based metallic glass

X. F. Wang, C. Wen, G. Yu, 2007 .

A biodegradable in situ Zn-Mg2Ge composite for bone-implant applications.

C. Wen, Yuncang Li, Sheng-Bing Huang, 2022, Acta biomaterialia.

The influence of surface energy of titanium-zirconium alloy on osteoblast cell functions in vitro.

C. Wen, P. Hodgson, G. Pande, 2011, Journal of biomedical materials research. Part A.

Biodegradable PLA-ZnO nanocomposite biomaterials with antibacterial properties, tissue engineering viability, and enhanced biocompatibility

C. Wen, Yuncang Li, A. Sola, 2022, Smart Materials in Manufacturing.

Effect of stacking fault energy and strain rate on the mechanical properties of Cu and Cu alloys

C. Wen, J. Tao, Xiaoxiang Wu, 2013 .

Thermal oxidation behaviour of bulk titanium with nanocrystalline surface layer

C. Wen, Yuncang Li, P. Hodgson, 2012 .

Manufacturing of graded titanium scaffolds using a novel space holder technique

M. Bermingham, D. Kent, M. Dargusch, 2017, Bioactive materials.

Corrosion of porous Ti35Zr28Nb in Hanks’ solution and 3.5 wt% NaCl

C. Wen, Yuncang Li, J. Kanwar, 2018, Materials and Corrosion.

Quantitative analysis of cooling and lubricating effects of graphene oxide nanofluids in machining titanium alloy Ti6Al4V

S. Ding, C. Wen, G. Li, 2019, Journal of Materials Processing Technology.

Mechanical, corrosion, and biocompatibility properties of Mg-Zr-Sr-Sc alloys for biodegradable implant applications.

C. Wen, Yuncang Li, K. Munir, 2019, Acta biomaterialia.

Efficient fabrication of ternary coupling biomimetic superhydrophobic surfaces with superior performance of anti-wetting and self-cleaning by a simple two-step method

C. Wen, Zhichao Ma, Guolin Xiao, 2022, Materials & Design.

Reversible wettability transition between superhydrophilicity and superhydrophobicity through alternate heating-reheating cycle on laser-ablated brass surface

C. Wen, Yuncang Li, Yue Jiang, 2019, Applied Surface Science.

Preparation and Characterisation of Open-Cell Microporous Nickel

Yasuo Yamada, C. Wen, T. Banno, 2007 .

Micro-Porous Nickel Produced by Powder Metallurgy

Yasuo Yamada, C. Wen, T. Banno, 2007 .

Compressive Deformation Behaviour of a Closed-Cell Aluminum

Yasuo Yamada, C. Wen, T. Banno, 2006 .

Compression Test Simulation of Controlled Cell Shape Open Cellular Magnesium Alloy under Dynamic Loading

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2001 .

Biomimetic Coating on Pure Titanium Submitted to Different Surface Treatments

C. Wen, P. Hodgson, Y. Li, 2009 .

An investigation of the mechanical and microstructural evolution of a TiNbZr alloy with varied ageing time

C. Wen, Yuncang Li, Arne Biesiekierski, 2018, Scientific Reports.

Flexible Superhydrophobic and Superoleophilic MoS2 Sponge for Highly Efficient Oil-Water Separation

C. Wen, Xiufeng Wang, Xiao Ouyang, 2016, Scientific Reports.

Design of a New Biocompatible Ti-Based Shape Memory Alloy and Its Superelastic Deformation Behaviour

C. Wen, P. Hodgson, Y. Li, 2010 .

Influence of Titanium Alloying Element Substrata on Bacterial Adhesion

C. Berndt, James Wang, E. Ivanova, 2012 .

Recent Progress on Nanocrystalline Metallic Materials for Biomedical Applications

C. Wen, Huafang Li, Pengyu Wang, 2022, Nanomaterials.

Binary Zn–Ti alloys for orthopedic applications: Corrosion and degradation behaviors, friction and wear performance, and cytotoxicity

M. Dargusch, C. Wen, Yuncang Li, 2021 .

The Application of the Rare Earths to Magnesium and Titanium Metallurgy in Australia

C. Wen, Yuncang Li, Arne Biesiekierski, 2019, Advanced materials.

Microstructures, mechanical properties, corrosion, and biocompatibility of extruded Mg–Zr–Sr–Ho alloys for biodegradable implant applications

C. Wen, Yuncang Li, K. Munir, 2022, Journal of Magnesium and Alloys.

Degradation behavior, cytotoxicity, hemolysis, and antibacterial properties of electro-deposited Zn-Cu metal foams as potential biodegradable bone implants.

C. Wen, Yuncang Li, Dechuang Zhang, 2019, Acta biomaterialia.

New Approaches to the Study of Spinel Ferrite Nanoparticles for Biomedical Applications

C. Berndt, James Wang, C. Wen, 2015 .

In vitro bioactivity evaluation of titanium and niobium metals with different surface morphologies.

C. Wen, P. Hodgson, Y. Li, 2008, Acta biomaterialia.

Surfactants in Mechanical Alloying/Milling: A Catch-22 Situation

C. Wen, A. Nouri, 2014 .

Microstructures, mechanical properties and in vitro corrosion behaviour of biodegradable Mg–Zr–Ca alloys

C. Wen, Yuncang Li, P. Hodgson, 2013, Journal of Materials Science.

Investigation and modeling of flank wear process of different PCD tools in cutting titanium alloy Ti6Al4V

S. Ding, C. Wen, G. Li, 2017, The International Journal of Advanced Manufacturing Technology.

Study on the Role of Stearic Acid and Ethylene-bis-stearamide on the Mechanical Alloying of a Biomedical Titanium Based Alloy

C. Wen, A. Nouri, P. Hodgson, 2010 .

Role of stacking fault energy and strain rate in strengthening of Cu and Cu-Al alloys

C. Wen, J. Tao, B. Cai, 2014 .

Simultaneously enhanced strength and ductility of Cu–xGe alloys through manipulating the stacking fault energy (SFE)

C. Wen, Yuncang Li, X. Zhu, 2013 .

Fabrication of nanoporous Ni by chemical dealloying Al from Ni-Al alloys for lithium-ion batteries

C. Wen, Xinkun Zhu, Arafater Rahman, 2014 .

Biodegradable ternary Zn-3Ge-0.5X (X=Cu, Mg, and Fe) alloys for orthopedic applications.

M. Dargusch, C. Wen, Yuncang Li, 2020, Acta biomaterialia.

A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications.

C. Wen, Yuncang Li, Dechuang Zhang, 2020, Acta biomaterialia.

Microstructures, mechanical and corrosion properties of graphene nanoplatelet-reinforced zinc matrix composites for implant applications.

C. Wen, Yuncang Li, H. Kabir, 2022, Acta biomaterialia.

Development of beta-type Ti-Nb-Zr-Mo alloys for orthopedic applications

C. Wen, Yuncang Li, Arne Biesiekierski, 2021 .

Introduction and overview

C. Wen, Yuncang Li, Arne Biesiekierski, 2019, Structural Biomaterials.

Impact of ruthenium on microstructure and corrosion behavior of β-type Ti–Nb–Ru alloys for biomedical applications

C. Wen, Arne Biesiekierski, Y. Yamabe-Mitarai, 2014 .

Surface modification of additively manufactured metallic biomaterials with active antipathogenic properties

C. Wen, Yuncang Li, Anahita Rohani Shirvan, 2022, Smart Materials in Manufacturing.

Biodegradable metallic suture anchors: A review

C. Wen, Yuncang Li, Anahita Rohani Shirvan, 2022, Smart Materials in Manufacturing.

The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications

M. Dargusch, C. Wen, N. Balasubramani, 2020, Bioactive materials.

Nano-tribological behavior of graphene nanoplatelet–reinforced magnesium matrix nanocomposites

C. Wen, Yuncang Li, K. Munir, 2020 .

Realization and characterization of double-layer Ca-P coating on WE43 Mg alloy for biomedical applications

C. Wen, Yuncang Li, Mostafizur Rahman, 2020 .

Microstructure, mechanical properties, degradation behavior, and biocompatibility of porous Fe-Mn alloys fabricated by sponge impregnation and sintering techniques.

C. Wen, Yuncang Li, Dechuang Zhang, 2020, Acta biomaterialia.

Powder metallurgy in manufacturing of medical devices

C. Wen, Yuncang Li, Arne Biesiekierski, 2020 .

Introduction to biomedical manufacturing

Arne Biesiekierski, Khurram Munir, Yuncang Li, 2020 .

Prospects and Strategies for Magnesium Alloys as Biodegradable Implants from Crystalline to Bulk Metallic Glasses and Composites - A Review

C. Wen, Yuncang Li, F. Kiani, 2019, Acta biomaterialia.

Prospects and Strategies for Magnesium Alloys as Biodegradable Implants from Crystalline to Bulk Metallic Glasses and Composites - A Review

C. Wen, Yuncang Li, F. Kiani, 2019, SSRN Electronic Journal.

Carbon Nanotubes and Graphene as Nanoreinforcements in Metallic Biomaterials: a Review

C. Wen, Yuncang Li, K. Munir, 2019, Advanced biosystems.

Investigating Mg Biocorrosion In Vitro: Lessons Learned and Recommendations

Andrej Atrens, Sean Johnston, Zhiming Shi, 2019, JOM.

Mechanical properties, in vitro corrosion and biocompatibility of newly developed biodegradable Mg-Zr-Sr-Ho alloys for biomedical applications

Cuie Wen, Yuncang Li, Yunfei Ding, 2016, Scientific Reports.

Titanium Alloys, Including Nitinol

C. Wen, Yuncang Li, Arne Biesiekierski, 2020 .

Effects of selected metallic and interstitial elements on the microstructure and mechanical properties of beta titanium alloys for orthopedic applications

C. Wen, Yuncang Li, Arne Biesiekierski, 2019, Materialia.

Ion-substituted calcium phosphate coatings by physical vapor deposition magnetron sputtering for biomedical applications: A review.

C. Wen, Yuncang Li, M. Qadir, 2019, Acta biomaterialia.

Fabrication of novel TiZr alloy foams for biomedical applications

Yasuo Yamada, C. Wen, P. Hodgson, 2006 .

Surface modifications of metallic biomaterials

C. Wen, Yuncang Li, Arne Biesiekierski, 2020 .

HA coating on Mg alloys for biomedical applications: A review

C. Wen, Yuncang Li, Mostafizur Rahman, 2020 .

Transition metal-substituted cobalt ferrite nanoparticles for biomedical applications.

C. Berndt, James Wang, C. Wen, 2013, Acta biomaterialia.

Microstructural evolution and its influence on the mechanical properties of a thermomechanically processed β Ti-32Zr-30Nb alloy

C. Wen, Yuncang Li, Hongwei Jiang, 2018 .

Mechanical and corrosion properties of extruded Mg–Zr–Sr alloys for biodegradable implant applications

C. Wen, Yuncang Li, K. Munir, 2021, Materials Science and Engineering: A.

Cold rolling deformation and annealing behavior of a β-type Ti–34Nb–25Zr titanium alloy for biomedical applications

C. Wen, Yuncang Li, Jixing Lin, 2020 .

Novel β-Ti35Zr28Nb alloy scaffolds manufactured using selective laser melting for bone implant applications.

Yunfei Ding, M. Brandt, C. Wen, 2019, Acta biomaterialia.

Deformation mechanism and mechanical properties of a thermomechanically processed β Ti-28Nb-35.4Zr alloy.

C. Wen, Yuncang Li, Hongwei Jiang, 2018, Journal of the mechanical behavior of biomedical materials.

Development of Ti-Nb-Zr alloys with high elastic admissible strain for temporary orthopedic devices.

C. Wen, Yuncang Li, Jixing Lin, 2015, Acta biomaterialia.

Microstructure and superelasticity of a biomedical β-type titanium alloy under various processing routes

C. Wen, D. C. Zhang, J. Lin, 2016 .

Microstructures and mechanical properties of in situ TiC–β–Ti–Nb composites with ultrafine grains fabricated by high-pressure sintering

C. Wen, L. Gong, D. C. Zhang, 2018, Scientific Reports.

Impact of the rare earth elements scandium and yttrium on beta-type Ti-24Nb-38Zr-2Mo-base alloys for orthopedic applications

C. Wen, Yuncang Li, Arne Biesiekierski, 2020, Materialia.

Material selection for medical devices

Arne Biesiekierski, Khurram Munir, Yuncang Li, 2020 .

Mechanical properties of electrodeposited nanocrystalline and ultrafine-grained Zn-Sn coatings

James Wang, C. Wen, Y. Durandet, 2018 .

Effect of ultrasonic stirring on the microstructure and mechanical properties of in situ Mg2Si/Al composite

C. Wen, Jixing Lin, Guangyu Li, 2016 .

Biomimetic Porous Titanium Scaffolds for Orthopedic and Dental Applications

Cuie Wen, Peter Hodgson, C. Wen, 2010 .

Nanoscale SiO2/ZrO2 Particulate-Reinforced Titanium Composites for Bone Implant Materials

C. Wen, P. Hodgson, Chao Han, 2012 .

Osteoblast cell response to nanoscale SiO2/ZrO2 particulate-reinforced titanium composites and scaffolds by powder metallurgy

C. Wen, Yuncang Li, P. Hodgson, 2012, Journal of Materials Science.

Fabrication and Characterization of Nanoporous Niobia, and Nanotubular Tantala, Titania and Zirconia via Anodization

Sepideh Minagar, C. Berndt, C. Wen, 2015, Journal of functional biomaterials.

Compressibility of porous magnesium foam: dependency on porosity and pore size

M. Mabuchi, K. Shimojima, C. Wen, 2004 .

Processing of biocompatible porous Ti and Mg

Mamoru Mabuchi, Cuie Wen, Yasumasa Chino, 2001 .

Processing and mechanical properties of autogenous titanium implant materials

M. Mabuchi, K. Shimojima, C. Wen, 2002, Journal of materials science. Materials in medicine.

Microstructural characterization and mechanical properties of Mg-Zr-Ca alloys prepared by hot-extrusion for biomedical applications

Peter Hodgson, Yuncang Li, Cuie Wen, 2011 .

Additive manufacturing of antibacterial PLA-ZnO nanocomposites: Benefits, limitations and open challenges

C. Wen, Yuncang Li, A. Sola, 2021, Journal of Materials Science & Technology.

Influence of deformation-induced heating on the bond strength of rolled metal multilayers

C. Wen, P. Hodgson, Dengke Yang, 2009 .

Surface Characterization and Biocompatibility of Hydroxyapatite Coating on Anodized TiO2 Nanotubes via PVD Magnetron Sputtering.

C. Wen, Yuncang Li, Arne Biesiekierski, 2021, Langmuir : the ACS journal of surfaces and colloids.

Expression of cell adhesion and differentiation related genes in MC3T3 osteoblasts plated on titanium alloys: role of surface properties.

C. Wen, P. Hodgson, G. Pande, 2013, Materials science & engineering. C, Materials for biological applications.

Enhanced corrosion resistance via phosphate conversion coating on pure Zn for medical applications

C. Wen, Yuncang Li, Jixing Lin, 2020 .

Structural polymer biomaterials

C. Wen, A. Nouri, Anahita Rohani Shirvan, 2021 .

Stainless steels in orthopedics

C. Wen, A. Nouri, 2021 .

Magnesium-based composites reinforced with graphene nanoplatelets as biodegradable implant materials

C. Wen, Yuncang Li, K. Munir, 2020 .

Investigation on Composition, Mechanical Properties, and Corrosion Resistance of Mg-0.5Ca-X(Sr, Zr, Sn) Biological Alloy

C. Wen, Jixing Lin, Yingchao Su, 2018, Scanning.

Ultrahigh Strength Copper Obtained by Surface Mechanical Attrition Treatment at Cryogenic Temperature

C. Wen, J. Tao, Yu Shen, 2015, Journal of Materials Engineering and Performance.

Calcium Phosphate-Based Composite Coating by Micro-Arc Oxidation (MAO) for Biomedical Application: A Review

C. Wen, Yuncang Li, M. Qadir, 2018 .

Introduction to surface coating and modification for metallic biomaterials

C. Wen, A. Nouri, 2015 .

Development of biodegradable Zn-1Mg-0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications.

M. Dargusch, C. Wen, Yuncang Li, 2020, Acta biomaterialia.

Graphene nanoplatelets-reinforced magnesium metal matrix nanocomposites with superior mechanical and corrosion performance for biomedical applications

C. Wen, Yuncang Li, K. Munir, 2020 .

Microstructures and Various Properties of Hot-Extruded Mg-Zr-Ca Alloys for Biomedical Applications

C. Wen, D. Luo, P. Hodgson, 2012 .

Biodegradable Mg–Zr–Ca alloys for bone implant materials

Cynthia S. Wong, C. Wen, Yuncang Li, 2012 .

Biodegradable Mg-Ca and Mg-Ca-Y Alloys for Regenerative Medicine

C. Wen, P. Hodgson, Wangyu Hu, 2010 .

Mg-Zr-Sr alloys as biodegradable implant materials.

C. Wen, Yuncang Li, P. Hodgson, 2012, Acta biomaterialia.

The effects of calcium and yttrium additions on the microstructure, mechanical properties and biocompatibility of biodegradable magnesium alloys

Peter Hodgson, Cuie Wen, Yuncang Li, 2011 .

Microstructures and mechanical properties of as cast Mg–Zr–Ca alloys for biomedical applications

C. Wen, Yuncang Li, D. Luo, 2012 .

Production methods and characterization of porous Mg and Mg alloys for biomedical applications

C. Wen, Yuncang Li, P. Hodgson, 2017 .

Effects of solution treatment and aging on the microstructure, mechanical properties, and corrosion resistance of a β type Ti–Ta–Hf–Zr alloy

C. Wen, Yuncang Li, K. Munir, 2017 .

Development of Surface Nano-Crystallization in Alloys by Surface Mechanical Attrition Treatment (SMAT)

C. Berndt, C. Wen, A. Kapoor, 2015 .

Effect of ball-milling time on the structural characteristics of biomedical porous Ti–Sn–Nb alloy

Peter Hodgson, Cuie Wen, C. Wen, 2011 .

Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications.

C. Wen, P. Hodgson, P. Hodgson, 2007, Acta biomaterialia.

Cellular responses of osteoblast-like cells to 17 elemental metals.

Cynthia S. Wong, C. Wen, Yuncang Li, 2016, Journal of biomedical materials research. Part A.

Biocompatibility of Nanoscale Hydroxyapatite Coating on TiO2 Nanotubes

C. Wen, Dechuang Zhang, Jianguo Lin, 2019, Materials.

Sol–gel derived hydroxyapatite/titania biocoatings on titanium substrate

C. Wen, Wei Xu, Wangyu Hu, 2006 .

Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous Ti-18Nb-4Sn alloy for biomedical applications.

C. Wen, Yuncang Li, P. Hodgson, 2008, Acta biomaterialia.

Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding

C. Wen, P. Čížek, P. Hodgson, 2010 .

Investigations into Ti-(Nb,Ta)-Fe alloys for biomedical applications.

C. Wen, Yuncang Li, Arne Biesiekierski, 2016, Acta biomaterialia.

Sol-gel derived HA/TiO2 double coatings on Ti scaffolds for orthopaedic applications

C. Wen, P. Hodgson, Wangyu Hu, 2006 .

Biomimetic modification of porous TiNbZr alloy scaffold for bone tissue engineering.

Yuncang Li, C. Wen, Yuncang Li, 2010, Tissue engineering. Part A.

Effect of process control agent on the porous structure and mechanical properties of a biomedical Ti-Sn-Nb alloy produced by powder metallurgy.

C. Wen, A. Nouri, P. Hodgson, 2010, Acta biomaterialia.

Cell response and bioactivity of titania-zirconia-zirconium titanate nanotubes with different nanoscale topographies fabricated in a non-aqueous electrolyte.

Sepideh Minagar, C. Berndt, C. Wen, 2015, Biomaterials science.

The influence of titania-zirconia-zirconium titanate nanotube characteristics on osteoblast cell adhesion.

Cuie Wen, Yuncang Li, Sepideh Minagar, 2015, Acta biomaterialia.

Impact of gadolinium on mechanical properties, corrosion resistance, and biocompatibility of Zn-1Mg-xGd alloys for biodegradable bone-implant applications.

C. Wen, Yuncang Li, Zimu Shi, 2022, Acta biomaterialia.

Biodegradable BBG/PCL composite scaffolds fabricated by selective laser sintering for directed regeneration of critical-sized bone defects

C. Wen, Huaiyu Wang, Runhuai Yang, 2022, Materials & Design.

Biodegradable Zn-Dy binary alloys with high strength, ductility, cytocompatibility, and antibacterial ability for bone-implant applications.

C. Wen, Yuncang Li, Sheng-Bing Huang, 2022, Acta biomaterialia.

Biodegradable Zn–Cu–Li alloys with ultrahigh strength, ductility, antibacterial ability, cytocompatibility, and suitable degradation rate for potential bone-implant applications

C. Wen, Yuncang Li, Sheng-Bing Huang, 2023, Smart Materials in Manufacturing.

Strontium content and collagen-I coating of Magnesium-Zirconia-Strontium implants influence osteogenesis and bone resorption.

C. Wen, Yuncang Li, J. M. Kumar, 2016, Clinical oral implants research.

Cytotoxicity of Titanium and Titanium Alloying Elements

P. Hodgson, C. Wen, Yuncang Li, 2010, Journal of dental research.

Effects of Mg17Sr2 Phase on the Bio‐Corrosion Behavior of Mg–Zr–Sr Alloys

Yunfei Ding, C. Wen, Yuncang Li, 2016 .

Mechanical Properties and Press Formability at Room Temperature of AZ31 Mg Alloy Processed by Single Roller Drive Rolling

Mamoru Mabuchi, Cuie Wen, Yasumasa Chino, 2002 .

Superhydrophobic brass surfaces with tunable water adhesion fabricated by laser texturing followed by heat treatment and their anti-corrosion ability

Zhihui Zhang, L. Ren, C. Wen, 2021, Applied Surface Science.

MICROSTRUCTURES AND MECHANICAL PROPERTIES OF AS-CAST Mg-Zr-Ca ALLOYS FOR BIOMEDICAL APPLICATIONS

C. Wen, Yuncang Li, D. Luo, 2011 .

Microstructure and mechanical properties of high-pressure-assisted solidification of in situ Al–Mg2Si composites

C. Wen, Yuncang Li, Dechuang Zhang, 2018, Materials Science and Engineering: A.

The Grain Size Dependence of Strength in the Extruded AZ91 Mg Alloy

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2006 .

The influence of heat treatment on discharge and electrochemical properties of Mg-Gd-Zn magnesium anode with long period stacking ordered structure for Mg-air battery

C. Wen, Xingrui Chen, A. Atrens, 2020 .

Compressive Properties of Hot-Rolled Mg-Zr-Ca Alloys for Biomedical Applications

C. Wen, D. Luo, P. Hodgson, 2011 .

Damping properties of open cell microcellular pure Al foams

C. Wen, Y. Shu, F. Han, 2007 .

Compressive Deformation Characteristics of Open-Cell Mg Alloys with Controlled Cell Structure

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2002 .

Biodegradable Mg-Zr-Ca Alloys for Bone Implant Materials

Cynthia S. Wong, C. Wen, Yuncang Li, 2011 .

Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications.

C. Wen, Xiaobo Chen, Yun-cang Li, 2009, Acta biomaterialia.

Selective laser melting in biomedical manufacturing

C. Wen, Yuncang Li, Arne Biesiekierski, 2020 .

The role of temperature in the strengthening of Cu–Al alloys processed by surface mechanical attrition treatment

C. Wen, Yu Shen, B. Cai, 2015 .

Thermal stability of the Al70Ni10Ti10Zr5Ta5 amorphous alloy powder fabricated by mechanical alloying

C. Wen, H. Xie, F. Han, 2010 .

Degradation of the strength of porous titanium after alkali and heat treatment

Cynthia S. Wong, C. Wen, Yuncang Li, 2009 .

Mechanical Properties and Blow Forming of Rolled AZ31 Mg Alloy Sheet

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2003 .

Effect of Processing Techniques on Interface Bonding of Graphene Reinforced Metal Matrix Composites: A Review

C. Wen, Zhenfei Cai, Yangzhou Ma, 2022, JOM.

The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding

C. Wen, Dengke Yang, P. Hodgson, 2009 .

Sound absorption characteristics of aluminum foam with spherical cells

C. Wen, F. Han, Y. Li, 2011 .

Noble metal alloys for load-bearing implant applications

C. Wen, A. Nouri, 2021 .

Preparation of bioactive porous Ti-Sn-Nb alloy for biomedical applications

Yasuo Yamada, C. Wen, A. Nouri, 2007 .

Porous Ti-10Mo alloy fabricated by powder metallurgy for promoting bone regeneration

C. Wen, Wei Xu, Gang Chen, 2019, Science China Materials.

Porous TiNbZr alloy scaffolds for biomedical applications.

C. Wen, Yuncang Li, P. Hodgson, 2009, Acta biomaterialia.

Titanium-niobium pentoxide composites for biomedical applications

C. Wen, Yuncang Li, K. Munir, 2016, Bioactive materials.

Ti-SrO metal matrix composites for bone implant materials.

Cynthia S. Wong, C. Wen, Yuncang Li, 2014, Journal of materials chemistry. B.

Quantitative Analyses of MWCNT‐Ti Powder Mixtures using Raman Spectroscopy: The Influence of Milling Parameters on Nanostructural Evolution

C. Wen, P. Kingshott, Yuncang Li, 2015 .

Synthesis of Ti-Sn-Nb alloy by powder metallurgy

Yasuo Yamada, C. Wen, Yuncang Li, 2008 .

Microstructure, mechanical properties, friction and wear performance, and cytotoxicity of additively manufactured zirconia-toughened alumina for dental applications

C. Wen, Yuncang Li, Sheng-Bing Huang, 2023, Composites Part B: Engineering.

Sputtered hydroxyapatite nanocoatings on novel titanium alloys for biomedical applications

C. Berndt, James Wang, E. Ivanova, 2013 .

Processing of fine-grained aluminum foam by spark plasma sintering

M. Mabuchi, K. Shimojima, C. Wen, 2003 .

Simultaneously enhanced strength and ductility of titanium via multimodal grain structure

C. Wen, Dengke Yang, P. Hodgson, 2010 .

Mechanical Properties of Cellular Magnesium Materials

M. Mabuchi, K. Shimojima, C. Wen, 2000 .

Effects of structural property and surface modification of Ti6Ta4Sn scaffolds on the response of SaOS2 cells for bone tissue engineering

Cuie Wen, Peter Hodgson, Yuncang Li, 2010 .

Bioactive Hydroxyapatite Coating on Titanium-Niobium Alloy through a Sol-Gel Process

C. Wen, P. Hodgson, Y. Li, 2009 .

Fabrication of Ti14Nb4Sn Alloys for Bone Tissue Engineering Applications

C. Berndt, James Wang, E. Ivanova, 2012 .

Porous shape memory alloy scaffolds for biomedical applications: a review

C. Wen, P. Hodgson, Y. Li, 2010 .

Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium

C. Wen, P. Čížek, P. Hodgson, 2010 .

In vitro osteoblast-like cell proliferation on nano-hydroxyapatite coatings with different morphologies on a titanium-niobium shape memory alloy.

C. Wen, Yuncang Li, P. Hodgson, 2010, Journal of biomedical materials research. Part A.

New Ti-Ta-Zr-Nb alloys with ultrahigh strength for potential orthopedic implant applications.

C. Wen, Yuncang Li, Jixing Lin, 2017, Journal of the mechanical behavior of biomedical materials.

Interdependencies between graphitization of carbon nanotubes and strengthening mechanisms in titanium matrix composites

C. Wen, Yuncang Li, K. Munir, 2018, Materialia.

The impact of Co/La ratios on microstructure and magnetic properties of the Sr0.75−xCa0.25LaxFe12−yCoyO19 hexaferrites

Cuie Wen, Yujie Yang, Duohui Huang, 2015 .

Microstructure, wear resistance, and corrosion performance of Ti35Zr28Nb alloy fabricated by powder metallurgy for orthopedic applications

W. Xu, C. Wen, Xin Lu, 2020 .

Fabrication of Ti–Nb–Ag alloy via powder metallurgy for biomedical applications

C. Wen, Yuncang Li, P. Hodgson, 2014 .

Fabrication of TiAl by blended elemental powder semisolid forming

C. Wen, Y. Yamada, K. Yasue, 2001 .

Deterioration of the Strong sp2 Carbon Network in Carbon Nanotubes during the Mechanical Dispersion Processing—A Review

C. Wen, K. Munir, 2016 .

Fabrication and properties of newly developed Ti35Zr28Nb scaffolds fabricated by powder metallurgy for bone-tissue engineering

C. Wen, M. Hayat, Xin Lu, 2019, Journal of Materials Research and Technology.

Metastable structures of immiscible FexCu100 x system induced by mechanical alloying

C. Wen, Shiqiang Wei, Wenhan Liu, 1997 .

Open challenges in tensile testing of additively manufactured polymers: A literature survey and a case study in fused filament fabrication

C. Wen, Yuncang Li, A. Sola, 2022, Polymer Testing.

Preparation of Titanium/Strontia Composite by Powder Metallurgy for Biomedical Application

C. Wen, P. Hodgson, Y. Li, 2012 .

Ti6Ta4Sn alloy and subsequent scaffolding for bone tissue engineering.

Yuncang Li, C. Wen, Yuncang Li, 2009, Tissue engineering. Part A.

Ti 6 Ta 4 Sn Alloy and Subsequent Scaffolding for Bone Tissue Engineering

C. Wen, Yuncang Li, P. Hodgson, 2009 .

Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications

Cuie Wen, Milan Brandt, Yuncang Li, 2018, Acta Materialia.

Fabrication and characterization of TiO2-ZrO2-ZrTiO4 nanotubes on TiZr alloy manufactured via anodization.

Sepideh Minagar, C. Berndt, C. Wen, 2014, Journal of materials chemistry. B.

Numerical investigation of the effect of porous titanium femoral prosthesis on bone remodeling

C. Wen, Wenyi Yan, J. Berthe, 2011 .

Strain rate dependence of tensile strength and ductility of nano and ultrafine grained coppers

C. Wen, Yue Jiang, Jiangjiang Hu, 2018 .

The defect structures and mechanical properties of Cu and Cu–Al alloys processed by split Hopkinson pressure bar

Kai Yang, C. Wen, J. Tao, 2013 .

Phase field simulation of spinodal decomposition in Zr–Nb alloys for implant materials

C. Wen, Jianguo Lin, Z. Pi, 2019, Journal of Applied Physics.

A review on bioactive porous metallic biomaterials

C. Berndt, James Wang, E. Ivanova, 2013 .

Novel titanium foam for bone tissue engineering

Mamoru Mabuchi, Cuie Wen, Yasumasa Chino, 2002 .

Nanostructured Silicon Anodes for High‐Performance Lithium‐Ion Batteries

C. Wen, A. Bhatt, G. Song, 2016 .

A review on porous negative electrodes for high performance lithium-ion batteries

C. Wen, M. A. Rahman, G. Song, 2015, Journal of Porous Materials.

A Review of Metal Silicides for Lithium-Ion Battery Anode Application

C. Wen, Bo Ding, C. Yuan, 2020, Acta Metallurgica Sinica (English Letters).

Enhanced stability and electrochemical properties of lanthanum and cerium co-modified LiVOPO4 cathode materials for Li-ion batteries

Muhammad Imran, C. Wen, Zishan Ahsan, 2022, Journal of Rare Earths.

High electrochemical stability Al-doped spinel LiMn2O4 cathode material for Li-ion batteries

C. Wen, Zexin Yu, Youlong Xu, 2020 .

Hierarchical composite structure to simultaneously realize superior superhydrophobicity and anti-reflection

C. Wen, Zhichao Ma, L. Ren, 2022, Applied Surface Science.

Thermodynamic analysis on wetting states and wetting state transitions of rough surfaces.

C. Wen, Yuncang Li, J. Lian, 2020, Advances in colloid and interface science.

An investigation of the mechanical and microstructural evolution of a TiNbZr alloy with varied ageing time

C. Wen, Yuncang Li, Arne Biesiekierski, 2018, Scientific Reports.

A Comparative Study on the Nanoindentation Behavior, Wear Resistance and in vitro Biocompatibility of SLM Manufactured CP-Ti and EBM Manufactured Ti64 Gyroid Scaffolds

C. Wen, Yuncang Li, A. Ataee, 2019, Acta biomaterialia.

A Comparative Study on the Nanoindentation Behavior, Wear Resistance and in vitro Biocompatibility of SLM Manufactured CP-Ti and EBM Manufactured Ti64 Gyroid Scaffolds

C. Wen, Yuncang Li, A. Ataee, 2019, SSRN Electronic Journal.

Titanium-nickel shape memory alloy foams for bone tissue engineering.

X. J. Wang, C. Wen, P. Hodgson, 2008, Journal of the mechanical behavior of biomedical materials.

INFLUENCE OF POROSITY ON SHAPE MEMORY BEHAVIOR OF POROUS TiNi SHAPE MEMORY ALLOY

C. Wen, Yuncang Li, P. Hodgson, 2008 .

Additive manufacturing of metallic and polymeric load-bearing biomaterials using laser powder bed fusion: A review

C. Wen, Yuncang Li, A. Nouri, 2021 .

Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti-24Nb-38Zr-2Mo alloy for orthopedic applications.

M. Dargusch, C. Wen, Yuncang Li, 2021, Acta biomaterialia.

Synthesis and characterization of nanostructured Ag on porous titania

C. Wen, Yuncang Li, P. Hodgson, 2011 .

Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications

Cuie Wen, Darren Fraser, Yuncang Li, 2018 .

A Brief Review of Biomedical Shape Memory Alloys by Powder Metallurgy

James Wang, C. Wen, Arne Biesiekierski, 2012 .

A study of the capacity fade of porous NiO/Ni foam as negative electrode for lithium-ion batteries

C. Wen, M. A. Rahman, 2016, Ionics.

Fabrication of Al-based bulk metallic glass by mechanical alloying and vacuum hot consolidation

C. Wen, F. Han, X. Wei, 2010 .

FABRICATION OF NANOPOROUS NICKEL FOAM BY POWDER METALLURGY AND CHEMICAL

Xiaogang Wang, C. Wen, M. A. Rahman, 2015 .

Composition dependency of the glass forming ability (GFA) in Mg–Ni–Si system by mechanical alloying

C. Wen, Yuncang Li, Jianguo Lin, 2007 .

Phase formation and physical properties of mechanically alloyed amorphous 55Mg35Ni10Si

C. Wen, Dengke Yang, F. Han, 2006 .

Plastic deformation in a partially crystallized Zr-based BMG under Vickers indenter

C. Wen, Yuncang Li, P. Hodgson, 2009 .

Plastic deformation in the annealed Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under indenter

C. Wen, Yuncang Li, P. Hodgson, 2009 .

Novel porous Ti35Zr28Nb scaffolds fabricated by powder metallurgy with excellent osteointegration ability for bone-tissue engineering applications.

C. Wen, M. Hayat, Xin Lu, 2019, Materials science & engineering. C, Materials for biological applications.

Extrusion properties of a Zr-based bulk metallic glass

C. Wen, G. Yu, Jixing Lin, 2009 .

A Review on Li-S Batteries as a High Efficiency Rechargeable Lithium Battery

Ajay Kapoor, Cuie Wen, Marzieh Barghamadi, 2013 .

Surface Modification of TiZr Alloy for Biomedical Application

C. Wen, P. Hodgson, A. Nouri, 2006 .

Enhanced Energy Storage Performance of Zr-Doped TiNb2O7 Nanospheres Prepared by the Hydrolytic Method

C. Wen, Zhenfei Cai, Yangzhou Ma, 2023, ACS Sustainable Chemistry & Engineering.

In silico and in vivo studies of the effect of surface curvature on the osteoconduction of porous scaffolds

Lan Li, Qing Jiang, C. Wen, 2021, Biotechnology and bioengineering.

Enhanced electrochemical performance of Li-ion batteries with nanoporous titania as negative electrodes

C. Wen, M. A. Rahman, Xiaojiang Wang, 2015 .

Compressive deformation and damage of Mg-based metallic glass interpenetrating phase composite containing 30–70 vol% titanium

C. Wen, Haifeng Zhang, P. Hodgson, 2010 .

ZnP‐Coated Zn1Cu0.1Ti Membrane with High Strength‐Ductility, Antibacterial Ability, Cytocompatibility, and Osteogenesis for Biodegradable Guided Bone Regeneration Applications

C. Wen, Yuncang Li, Sheng-Bing Huang, 2023, Advanced Functional Materials.

Fabrication of nanoscale Ti honeycombs by focused ion beam

Mamoru Mabuchi, Cuie Wen, Yasumasa Chino, 2003 .

Aggravated stress fluctuation and mechanical size effects of nanoscale lamellar bone pillars

L. Ren, C. Wen, Hongwei Zhao, 2021, NPG Asia Materials.

Porous Titanium with Porosity Gradients for Biomedical Applications

Peter Hodgson, Cuie Wen, Yasuo Yamada, 2007 .

Preparation and Characterisation of New Titanium Based Alloys for Orthopaedic and Dental Applications

C. Wen, A. Nouri, P. Hodgson, 2006 .

Electrochemical performance and stability improvement of triclinic LiVOPO4 cathode material via simultaneous Y doping and YPO4 surface modification

C. Wen, Chuangui Jin, Zishan Ahsan, 2022, Applied Surface Science.

Additive manufacturing of functionally graded porous titanium scaffolds for dental applications.

C. Wen, Bowen Liu, S. Tian, 2022, Biomaterials advances.

Superhydrophobic Mechano-Bactericidal Surface with Photodynamic Antibacterial Capability.

Zhihui Zhang, L. Ren, C. Wen, 2022, ACS applied materials & interfaces.

Improvement of the biomedical properties of titanium using SMAT and thermal oxidation.

C. Wen, Yuncang Li, P. Hodgson, 2014, Colloids and surfaces. B, Biointerfaces.

Tribological Behaviour of Pure Ti with a Nanocrystalline Surface Layer Under Different Loads

C. Wen, Yuncang Li, P. Hodgson, 2011, Tribology Letters.

Development of Bio-Compatible Metallic Structures Using Direct Metal Deposition Process

C. Wen, S. Masood, W. Song, 2012 .

Biological Performances of Titanium Scaffolds: A Review

C. Berndt, James Wang, E. Ivanova, 2012 .

Improvement of stability and capacity of Co-free, Li-rich layered oxide Li1.2Ni0.2Mn0.6O2 cathode material through defect control.

C. Wen, D. Yu, Youlong Xu, 2022, Journal of colloid and interface science.

Recent Progress in Capacity Enhancement of LiFePO4 Cathode for Li-Ion Batteries

C. Wen, M. Javed, Zishan Ahsan, 2020, Journal of Electrochemical Energy Conversion and Storage.

Study of TiO2-Coated α-Fe2O3 Composites and the Oxygen-Defects Effect on the Application as the Anode Materials of High-Performance Li-Ion Batteries

C. Wen, Youlong Xu, Bo Ding, 2020 .

Enhanced Electrochemical Performance of Silicon Anode Materials with Titanium Hydride Treatment

C. Wen, Zhenfei Cai, Yangzhou Ma, 2023, SSRN Electronic Journal.

Bone formation following implantation of titanium sponge rods into humeral osteotomies in dogs: a histological and histometrical study.

C. Wen, L. Sennerby, P. Faria, 2010, Clinical implant dentistry and related research.

Novel carbon nanotubes reinforced Ti28Nb35.4Zr matrix composites fabricated via direct metal deposition for bone implant applications

C. Wen, Yuncang Li, K. Munir, 2023, Materialia.

Individual layer thickness-dependent nanoindentation and nanotribological behaviors of Ta/Co nanolaminates

C. Wen, Yuncang Li, M. Nasim, 2021 .

Nutrient alloying elements in biodegradable metals: a review.

C. Wen, Huafang Li, Pengyu Wang, 2021, Journal of materials chemistry. B.

Advances in Mg–Al-layered double hydroxide steam coatings on Mg alloys: A review

C. Wen, R. Zeng, Fen Zhang, 2023, Journal of Magnesium and Alloys.

Significantly enhanced performance of Li-storage via in-situ oxidation of silicon particles by zinc oxide

C. Wen, Zexin Yu, Zishan Ahsan, 2023, Materials Today Communications.

An in situ Zn–5Mg2Ge composite processed by ultrasonication for biodegradable orthopedic implant applications

C. Wen, Yuncang Li, Sheng-Bing Huang, 2023, Journal of Materials Research and Technology.

Influence of scandium on mechanical properties, degradation behavior, and cytocompatibility of Zn-3Cu-0.4Li-xSc alloys for implant applications

C. Wen, Yuncang Li, H. Kabir, 2023, Materialia.

Optimized Fabrication and Characterization of TiO2-Nb2O5-ZrO2 Nanotubes on β-Phase TiZr35Nb28 Alloy for Biomedical Applications via the Taguchi Method.

C. Wen, Yuncang Li, Arne Biesiekierski, 2019, ACS biomaterials science & engineering.

Synthesis and Performance of Nati2 (Po4)3/Vgcf@C Anode Composite Material for Aqueous Sodium-Ion Batteries

C. Wen, Yi Cao, Bo Ding, 2023, SSRN Electronic Journal.

Metallurgical manipulation of surface Volta potential in bimetals and cell response of human mesenchymal stem cells.

C. Wen, Yan Li, Ning Gu, 2023, Biomaterials advances.

Nanotopography and surface chemistry of TiO2–ZrO2–ZrTiO4 nanotubular surfaces and the influence on their bioactivity and cell responses

Sepideh Minagar, C. Berndt, C. Wen, 2017 .

Effects of the Density on Compressive Properties in Cellular Aluminum Produced by the Sintering Method

Yasuo Yamada, M. Mabuchi, C. Wen, 2004 .

Characterization techniques for metallic biomaterials

C. Wen, Yuncang Li, Arne Biesiekierski, 2020 .

Elastic modulus and hardness of cortical and trabecular bovine bone measured by nanoindentation

C. Wen, P. Hodgson, Xiaobo Chen, 2006 .

The effect of lamellar spacing on the creep behavior of a fully lamellar TiAl alloy

C. Wen, C. Chen, Yue Zhang, 2000 .

Investigation of cell shape effect on the mechanical behaviour of open-cell metal foams

C. Wen, P. Hodgson, Chunhui Yang, 2012 .

Development of Ti–26Nb–1.2TiC shape memory composite for biomedical applications

C. Wen, Yuncang Li, Dechuang Zhang, 2023, Journal of Materials Science & Technology.

Microstructures and mechanical properties of in situ TiC–β–Ti–Nb composites with ultrafine grains fabricated by high-pressure sintering

C. Wen, L. Gong, D. C. Zhang, 2018, Scientific Reports.

Ultra-strong and ductile Ta/Co nanolaminates strengthened via grain-boundary expanding and interfacial sliding

M. Dargusch, C. Wen, Yuncang Li, 2021 .

Influence of stacking fault energy and strain rate on the mechanical properties in Cu and Cu-Al-Zn alloys

C. Wen, Xiaoxiang Wu, Lianping Cheng, 2013 .

Wear Behaviour of Pure Ti with a Nanocrystalline Surface Layer

C. Wen, P. Hodgson, M. Wen, 2011 .

A study on wear behaviour of laser direct metal deposited high strength H13 tool steel

C. Wen, S. Masood, Syed H. Riza, 2015 .

Disparate micro-mechanical behaviors of adjacent bone lamellae through in situ SEM micropillar compression

L. Ren, C. Wen, Hongwei Zhao, 2021 .

Corrosion and mechanical properties of AZ91D magnesium alloy fabricated by solid recycling process

Yasuo Yamada, M. Mabuchi, K. Shimojima, 2001 .

Effects of Deformation-Induced Heating on Bond Strength of Rolled Metal Multilayer

C. Wen, P. Hodgson, Dengcui Yang, 2010 .

Mechanical Properties of Micro-Porous Metals Produced by Space-Holding Sintering

Yasuo Yamada, C. Wen, T. Banno, 2007 .

Corrosion of Ti35Zr28Nb in Hanks’ solution and 3.5 wt% NaCl solution

C. Wen, A. Atrens, Z. Shi, 2018 .

A Newly Developed Biocompatible Titanium Alloy and its Scaffolding by Powder Metallurgy

C. Wen, Y. Li, 2012 .

Processing and Mechanical Properties of Porous Titanium-Niobium Shape Memory Alloy for Biomedical Applications

Yasuo Yamada, C. Wen, P. Hodgson, 2007 .

Human Body-Fluid-Assisted Fracture of Zinc Alloys as Biodegradable Temporary Implants: Challenges, Research Needs and Way Forward

C. Wen, Chunming Yang, N. Kazamer, 2023, Materials.

Impact of ruthenium on mechanical properties, biological response and thermal processing of β-type Ti-Nb-Ru alloys.

C. Wen, Yuncang Li, Arne Biesiekierski, 2017, Acta biomaterialia.

Dynamic behaviour of high strength steel parts developed through laser assisted direct metal deposition

C. Wen, S. Masood, D. Ruan, 2014 .

Effect of anodized TiO2-Nb2O5-ZrO2 nanotubes with different nanoscale dimensions on the biocompatibility of Ti35Zr28Nb alloy.

C. Wen, Yuncang Li, Arne Biesiekierski, 2020, ACS applied materials & interfaces.

Metallic foam bone : processing, modification and characterization and properties

Cuie Wen, C. Wen, 2016 .

Influences of recovery and recrystallization on the superelastic behavior of a β titanium alloy made by suction casting.

C. Wen, D. C. Zhang, J. Lin, 2014, Journal of materials chemistry. B.

Phosphorus-doped silicon copper alloy composites as high-performance anode materials for lithium-ion batteries

C. Wen, Zexin Yu, Zhenfei Cai, 2023, Journal of Electroanalytical Chemistry.

Mechanical properties, corrosion and degradation behaviors, and in vitro cytocompatibility of a biodegradable Zn-5La alloy for bone-implant applications.

C. Wen, Yuncang Li, Sheng-Bing Huang, 2023, Acta biomaterialia.

A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces.

Sepideh Minagar, C. Berndt, James Wang, 2012, Acta biomaterialia.

An optimized method for µCT analysis of trabecular parameters of metal scaffolds for bone ingrowth.

Yinghong Zhou, C. Wen, Yuncang Li, 2023, Tissue Engineering. Part C, Methods.

Wear behaviour of DMD-generated high-strength steels using multi-factor experiment design on a pin-on-disc apparatus

C. Wen, S. H. Masood, Syed H. Riza, 2016 .

Wear behaviour of DMD-generated high-strength steels using multi-factor experiment design on a pin-on-disc apparatus

C. Wen, S. Masood, Syed H. Riza, 2016, The International Journal of Advanced Manufacturing Technology.

Structural and electrochemical characterization of vanadium-excess Li3V2(PO4)3-LiVOPO4/C composite cathode material synthesized by sol–gel method

C. Wen, Xiaohua Feng, Zishan Ahsan, 2021, Journal of Solid State Electrochemistry.

Titanium-nickel shape memory alloy foams for bone tissue engineering.

C. Wen, Yuncang Li, J. Xiong, 2008, Journal of the mechanical behavior of biomedical materials.

Superhydrophobic Mechano-Bactericidal Surface with Photodynamic Antibacterial Capability.

Zhihui Zhang, L. Ren, C. Wen, 2022, ACS applied materials & interfaces.

Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: a review.

Yunfei Ding, C. Wen, Yuncang Li, 2014, Journal of materials chemistry. B.

Improvement of the biomedical properties of titanium using SMAT and thermal oxidation.

C. Wen, Yuncang Li, P. Hodgson, 2014, Colloids and surfaces. B, Biointerfaces.