A. Rocca

发表

Radial basis function Hermite collocation approach for the solution of time dependent convection-diffusion problems

A. Rocca, A. H. Rosales, H. Power, 2005 .

Characterisation of flame-generated soot and soot-in-oil using electron tomography volume reconstructions and comparison with traditional 2D-TEM measurements

A. Rocca, M. Fay, E. Haffner-Staton, 2016 .

Part-load particulate matter from a GDI engine and the connection with combustion characteristics

A. La Rocca, Fabrizio Bonatesta, Fabrizio Bonatesta, 2014 .

Investigations of injection strategies for stable cold idling of an HPCR diesel engine with a compression ratio of 15.5:1

P. Shayler, A. Rocca, I. Pegg, 2012 .

Symmetric radial basis function meshless approach for time dependent PDEs

A. Rocca, A. H. Rosales, H. Power, 2004 .

Characterisation of soot in oil from a gasoline direct injection engine using Transmission Electron Microscopy

Fabrizio Bonatesta, A. Rocca, M. Fay, 2015 .

Soot-in-Oil 3D Volume Reconstruction Through the Use of Electron Tomography: An Introductory Study

A. Rocca, M. Fay, O. Orhan, 2015, Tribology Letters.

Investigating the Effect of Carbon Nanoparticles on the Viscosity of Lubricant Oil from Light Duty Automotive Diesel Engines

P. Shayler, A. Rocca, Achombili Asango, 2014 .

Investigations of fuel injection strategy for cold starting direct-injection diesel engines

P. Shayler, A. Rocca, I. Pegg, 2007 .

Estimating the temperature evolution of foodstuffs during freezing with a 3D meshless numerical method

A. Rocca, H. Power, D. Stevens, 2015 .

Orhan, O. and Haffner-Staton, Ephraim and La Rocca, Antonino and Fay, Mike W. (2016) Characterisation of flame-generated soot and soot-in-oil using electron tomography volume reconstructions and comparison

A. Rocca, E. Haffner-Staton, M. Fay, 2018 .

Assessing the Accuracy of Soot Nanoparticle Morphology Measurements Using Three-Dimensional Electron Tomography

A. Cairns, A. Rocca, M. Fay, 2019, SAE Technical Paper Series.

Linking operating conditions of a GDI engine to the nature and nanostructure of ultrafine soot particles

A. Cairns, A. Rocca, M. Fay, 2022, Combustion and Flame.

Soot in the Lubricating Oil: An Overlooked Concern for the Gasoline Direct Injection Engine?

A. Rocca, M. Fay, E. Haffner-Staton, 2019, SAE Technical Paper Series.

Modeling of In-Cylinder Soot Particle Size Evolution and Distribution in a Direct Injection Diesel Engine

Zulkhairi Zainol Abidin, Fabrizio Bonatesta, P. Shayler, 2015 .

Towards keeping diesel fuel supply and demand in balance: Dual-fuelling of diesel engines with natural gas

Antonino La Rocca, Abdelrahman Hegab, Paul J. Shayler, 2017 .

Modelling the effect of precipitation inhibitors on the crystallization process from well mixed over-saturated solutions in gypsum based on Langmuir–Volmer flux correction

A. Rocca, H. Power, G. Ziegenbalg, 2006 .

Quantifying soot nanostructures: Importance of image processing parameters for lattice fringe analysis

A. Rocca, M. Fay, S. A. Pfau, 2020, Combustion and Flame.

Characterisation of ignition delay period for a compression ignition engine operating on blended mixtures of diesel and gasoline

Hoon Kiat Ng, Antonino La Rocca, Paul J. Shayler, 2014 .

Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black

A. Rocca, M. Fay, E. Haffner-Staton, 2018, Carbon.

The nanostructure of soot-in-oil particles and agglomerates from an automotive diesel engine

P. Shayler, A. Rocca, M. Fay, 2013 .

A Comprehensive Design Guideline of Hairpin Windings for High Power Density Electric Vehicle Traction Motors

C. Gerada, D. Gerada, A. Cairns, 2022, IEEE Transactions on Transportation Electrification.

Investigating the Effects of Multiple Pilot Injections on Stability at Cold Idle for a Dl Diesel Engine

Ian Graham Pegg, Paul J. Shayler, David MacMillan, 2009 .

A semi-flooded cooling for a high speed machine: Concept, design and practice of an oil sleeve

David Gerada, Z. Xu, Serhiy Bozhko, 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

A Hermite radial basis function collocation approach for the numerical simulation of crystallization processes in a channel

A. Rocca, H. Power, 2005 .

Application of nanoparticle tracking analysis platform for the measurement of soot-in-oil agglomerates from automotive engines

P. Shayler, A. Rocca, M. Fay, 2014 .

Extended summary Nanoparticle characteristics of exhaust and soot-in-oil from a light duty diesel engine

P. Shayler, A. Rocca, M. Fay, 2013 .

A double boundary collocation Hermitian approach for the solution of steady state convection-diffusion problems

Henry Power, A. La Rocca, A. Rocca, 2008, Comput. Math. Appl..

Thermal Modelling of a Liquid Cooled Traction Machine with 8-layer Hairpin Windings

C. Gerada, D. Gerada, A. Cairns, 2021, IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society.

4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft

David Gerada, Antonino La Rocca, Chris Gerada, 2021, IEEE Transactions on Transportation Electrification.

Morphological characterisation of diesel soot in oil and the associated extraction dependence

A. Rocca, M. Fay, G. Rance, 2018 .

Progress towards a methodology for high throughput 3D reconstruction of soot nanoparticles via electron tomography

A. Rocca, M. Fay, A. La Rocca, 2018, Journal of microscopy.

Progress towards a methodology for high throughput 3D reconstruction of soot nanoparticles via electron tomography

A. Rocca, E. Haffner-Staton, M. Fay, 2017 .

CFD Investigation on the Influence of In-Cylinder Mixture Distribution from Multiple Pilot Injections on Cold Idle Behaviour of a Light Duty Diesel Engine

Antonino La Rocca, Ian Graham Pegg, Paul J. Shayler, 2014 .

The Effect of Reducing Compression Ratio on the Work Output and Heat Release Characteristics of a DI Diesel under Cold Start Conditions

Ian Graham Pegg, Paul J. Shayler, David MacMillan, 2008 .

Investigation of temperature fields during stop-start operation of a spark ignition engine and the effect on engine behaviour after a restart

Paul J. Shayler, A. La Rocca, C. Rouaud, 2011 .

High Power High Speed PM-Assisted SynRel Machines with Ferrite and Rare Earth Magnets for Future Electric Commercial Vehicles

David Gerada, B. G. Fernandes, Chris Gerada, 2019, IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society.

Design of a Dual DC-Bus Homopolar Generator Implementing a Direct-Cooled Excitation Coil

C. Gerada, A. Rocca, L. Papini, 2023, 2023 IEEE International Electric Machines & Drives Conference (IEMDC).