G. Huang

发表

Analysis of the Breakage of Diamond Wire Saws in Sawing of Stone

Guo Qin Huang, Xi Peng Xu, G. Huang, 2006 .

Investigation on size effect of grain wear behavior during grinding nickel-based superalloy Inconel 718

G. Huang, Jiu-hua Xu, W. Ding, 2017 .

Micro-grooving of brittle materials using textured diamond grinding wheels shaped by an integrated nanosecond laser system

Xiangqian Jiang, G. Huang, Z. Tong, 2022, The International Journal of Advanced Manufacturing Technology.

Sawing performance comparison of brazed and sintered diamond wires

G. Huang, Xipeng Xu, 2013 .

Characterisation of diamond abrasive grains of grinding tools using industrial X-ray computed tomography

Xiangqian Jiang, G. Huang, L. Pagani, 2020 .

Understanding the residual stress distribution in brazed polycrystalline CBN abrasive grains

G. Huang, Honghua Su, W. Ding, 2017 .

Estimation of Power Consumption in the Circular Sawing of Stone Based on Tangential Force Distribution

G. Huang, Xipeng Xu, Hui Huang, 2018, Rock Mechanics and Rock Engineering.

Experimental investigations on grinding characteristics and removal mechanisms of 2D–Cf/C-SiC composites based on reinforced fiber orientations

G. Huang, Xipeng Xu, Changcai Cui, 2017 .

Percent Reduction in Transverse Rupture Strength of Metal Matrix Diamond Segments Analysed via Discrete-Element Simulations

G. Huang, Yuanqiang Tan, Yiqing Yu, 2018, Materials.

Fundamental aspects of ultrasonic assisted induction brazing of diamond onto 1045 steel

G. Huang, Xipeng Xu, Dekui Mu, 2018, Journal of Materials Processing Technology.

Research on gold film-assisted ultraviolet nanosecond laser machining of diamond microgrooves

G. Huang, Changcai Cui, Feng Jiang, 2023, Optics & Laser Technology.

Compressive Properties of Ti6al4v Functional Graded Lattice Structures Via Topology Optimization Design and Selective Laser Melting Fabrication

G. Huang, Yangli Xu, Yuanqiang Tan, 2022, SSRN Electronic Journal.

Numerical and experimental studies on the grinding of cemented carbide with textured monolayer diamond wheels

G. Huang, Xipeng Xu, Changcai Cui, 2019, International Journal of Refractory Metals and Hard Materials.

Investigation of grinding mechanism of a 2D Cf/C–SiC composite by single-grain scratching

G. Huang, Z. Tong, Xipeng Xu, 2019, Ceramics International.

Influence of grinding fiber angles on grinding of the 2D–Cf /C–SiC composites

G. Huang, Xipeng Xu, Changcai Cui, 2018, Ceramics International.

A study on the surface grinding of 2D C/SiC composites

G. Huang, Changcai Cui, C. Fang, 2017, The International Journal of Advanced Manufacturing Technology.

Towards Tailorable Interface Microstructure through Solid-state Interface Reaction between Synthetic Diamond Grits and Sputtered Ni-Cr Binary Alloy

Wei Cheng, G. Huang, Q. Lin, 2022, Applied Surface Science.

A study on the surface grinding of 2D C/SiC composites

G. Huang, Xipeng Xu, Changcai Cui, 2017 .

Brazing diamond grits onto AA7075 aluminium alloy substrate with Ag–Cu–Ti filler alloy by laser heating

G. Huang, Z. Tong, Changcai Cui, 2020 .

Grinding characteristics of aluminium alloy 4032 with a brazed diamond wheel

G. Huang, Xipeng Xu, Hua Guo, 2018 .

Comparison of brazed and sintered diamond tools for grinding of stone

G. Huang, X. P. Xu, H. Huang, 2014 .

A review on filler materials for brazing of carbon-carbon composites

G. Huang, Xiaoguo Song, W. Long, 2021 .

Research on Performance of Fixed Abrasive Tools of Polishing 6H-SiC Wafers

Xi Peng Xu, G. Huang, Jing Lu, 2014 .

Influence of laser scanning speed on the formation property of laser brazing diamond coating

G. Huang, A. Wu, Dashuang Liu, 2020 .

Micro-grooving of brittle materials using textured diamond grinding wheels shaped by an integrated nanosecond laser system

G. Huang, Z. Tong, Xipeng Xu, 2021, The International Journal of Advanced Manufacturing Technology.

Modeling and simulation of the distribution of undeformed chip thicknesses in surface grinding

Guoqin Huang, Xipeng Xu, Congfu Fang, 2018 .

Application of the Flexible Local Approximation Method to photonic crystal cavities

J. P. Webb, G. Huang, 2006, 2006 12th International Symposium on Antenna Technology and Applied Electromagnetics and Canadian Radio Sciences Conference.

Numerical Analysis of the Effects of Pulsed Laser Spot Heating Parameters on Brazing of Diamond Tools

G. Huang, Z. Tong, Changcai Cui, 2019, Metals.

Formation of TiC via interface reaction between diamond grits and Sn-Ti alloys at relatively low temperatures

G. Huang, Jianxin Wang, Xipeng Xu, 2017 .

Properties Evaluations of Topology Optimized Functionally Graded Lattice Structures Fabricated by Selective Laser Melting

G. Huang, Yangli Xu, Donghai Guo, 2023, Materials.

An experimental study of machining characteristics and tool wear in the diamond wire sawing of granite

Han Huang, Guoqin Huang, Xipeng Xu, 2013 .

Analysis of Temperatures in Sawing of Granite Based on Parabolic Heat Distribution

Xi Peng Xu, G. Huang, Yiqing Yu, 2013 .

Force and Temperature in Dry Cutting of Hardened W18Cr4V with PCBN

Xi Peng Xu, G. Huang, Haiyong Wu, 2010 .

Interfacial microstructure and mechanical properties of synthetic diamond brazed by Ni-Cr-P filler alloy

G. Huang, Xipeng Xu, Hui Huang, 2018, International Journal of Refractory Metals and Hard Materials.

Wear of a brazed diamond grinding wheel with diamonds precovered by brazing alloy

G. Huang, Xipeng Xu, Hui Huang, 2010 .