Luc Labey

发表

Hip and knee prostheses: macro and microcomposites versus mechanical design

Georges Van der Perre, Jos Vander Sloten, Luc Labey, 1991 .

Mechanical Design of an Exoskeleton with Joint-Aligning Mechanism for Children with Cerebral Palsy

Luc Labey, Yang Zhang, Sander De Groof, 2020, 2020 8th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob).

A new graphical method to display data sets representing biomechanical knee behaviour

Bernardo Innocenti, Silvia Pianigiani, Walter Pascale, 2015, Journal of Experimental Orthopaedics.

IN VITRO KINEMATICS OF UNICONDYLAR KNEE ARTHROPLASTY

Bernardo Innocenti, Luc Labey, Thomas J. Heyse, 2012 .

Teaching engineering students mechanics: case studies vs. exercise

Georges Van der Perre, Luc Labey, Siegfried Jaecques, 2001 .

The effect of medial markers on knee kinematics measurements from plug-in-gait

Alberto Leardini, B Callewaert, Kaat Desloovere, 2009 .

Bone ingrowth in total knee arthroplasty: the impact of HA-coatings and the relation with mechanical stability

Johan Bellemans, Guy Fabry, Luc Labey, 1998 .

IN VITRO KINEMATICS OF HUMAN NATIVE KNEES: A DATABASE OF 60 SPECIMENS

Jan Victor, Bernardo Innocenti, Silvia Pianigiani, 2012 .

Prediction of clinical foot characteristics using quantitative features from different measurement set-ups

Kris Cuppens, Stijn Luca, Louis Peeraer, 2015 .

Tibio-Femoral Contact Force During Gait: An Iterative Method Using EMG-Constrained Multi-Body Simulation and Finite Element Analysis

Ilse Jonkers, Lennart Scheys, Friedl De Groote, 2013 .

Fingerprinting Total Knee Arthroplasty to Characterize Surgical Variability: A Numerical Study

Scott A. Banks, Bernardo Innocenti, Silvia Pianigiani, 2012 .

Effect of overstuffing and understuffing in unicompartmental knee arthroplasty. A validated finite element analysis

Bernardo Innocenti, Luc Labey, Jos Vander Sloten, 2014 .

Development and Validation of a Wear Model to Predict Polyethylene Wear in a Total Knee Arthroplasty: A Finite Element Analysis

Bernardo Innocenti, Silvia Pianigiani, Walter Pascale, 2014 .

A numerical analysis of load sharing and implant positioning on the stress distribution in a prosthetized tibial bone

Pius Wong, Johan Bellemans, Bernardo Innocenti, 2008 .

De mechanische verankering van knie-prothesen in bot: de invloed van bio-actieve deklagen en de relatie met botingroei

Georges Van der Perre, Luc Labey, Jos Vander Sloten, 1997 .

Comparative theoretical study of the resistance against rotation in cementless THR stems

Michiel Mulier, Luc Labey, G. Van der Perre, 2006 .

Biomechanical factors in the design of a hip prosthesis with physiological transfer of joint loads

Georges Van der Perre, Luc Labey, Jos Vander Sloten, 1994 .

Prediction of the stability of cementless custom-made hip prostheses: geometrical considerations

Michiel Mulier, Georges Van der Perre, Luc Labey, 2006 .

A Motion Analysis Framework for Non-Invasive in-Vivo Evaluation of Knee Joint Performance

Alberto Leardini, B Callewaert, Lennart Scheys, 2012 .

Integration of computerised self-tests in mechanics teaching for first year students

Georges Van der Perre, Luc Labey, Siegfried Jaecques, 2006 .

Mark Coventry Award: Articular Contact Estimation in TKA Using in vivo Kinematics and FEA

Claudio Belvedere, Alberto Leardini, Bernardo Innocenti, 2009 .

Numerical sensitivity analysis of contact forces in several TKAs during squatting

Johan Bellemans, Andrea Corvi, Jan Victor, 2010 .

DEVELOPMENT AND VALIDATION OF A FINITE ELEMENT MODEL TO PREDICT PATELLO-FEMORAL WEAR IN TKA

Bernardo Innocenti, Silvia Pianigiani, Walter Pascale, 2012 .

Case based mechanics teaching for second year undergraduate engineering students. Three years of experience

Georges Van der Perre, Luc Labey, Siegfried Jaecques, 2004 .

Changes In Tka Kinematics And Contact Forces Induced By Mal-Configurations: A Numerical Study

Bernardo Innocenti, Silvia Pianigiani, Walter Pascale, 2012 .

An in-vitro study of human knee kinematics: natural vs. replaced joint

Johan Bellemans, Pius Wong, Jan Victor, 2009 .

P083 Study of the initial stability of the tibial component of a cementless total knee prosthesis: Influence of different fixation methods

Veerle Pattijn, Luc Labey, G. Van der Perre, 1998 .

Leuven mesh sheep study

Georges Van der Perre, Johan Bellemans, Guy Fabry, 1995 .

An analytical model to predict the primary stability of uncemented hip prostheses

Michiel Mulier, Georges Van der Perre, Luc Labey, 2007 .

Identification of landmarks on lower limb joint from CT images for kinematics studies. A totally semi-automatic procedure

Bernardo Innocenti, Cristina Bignardi, Luc Labey, 2011 .

Numerical and experimental kinematics and contact analysis in a Bi-Cruciate TKA during gait

Johan Bellemans, Jan Victor, Bernardo Innocenti, 2007 .

Geometrical considerations relevant to the initial stability of hip prostheses

Leonard Pastrav, Michiel Mulier, Georges Van der Perre, 2006 .

Biomechanical analysis of the post-cam mechanism in a TKA: comparison between conventional and semi-constrained insert designs

Lennart Scheys, Bernardo Innocenti, Silvia Pianigiani, 2015 .

Validation of a Three Dimensional Finite Element Model of a Femur with a Customized HIP Implant.

Luc Labey, J. Vander Sloten, B. Couteau, 2020 .

Analysis of the effects of prosthesis positioning and of load sharing on the stress distribution of a prosthetized tibial bone; a numerical study

Johan Bellemans, Bernardo Innocenti, Luc Labey, 2008 .

How Correctly Does an Intramedullary Rod Represent the Longitudinal Tibial Axes?

Jos Vander Sloten, Johan Bellemans, Luc Labey, 2002, Clinical orthopaedics and related research.

Johan Bellemans, Alberto Leardini, Kaat Desloovere, 2012, The Knee.

The influence of muscle load on tibiofemoral knee kinematics

Johan Bellemans, Jan Victor, Bernardo Innocenti, 2009, Journal of Orthopaedic Research.

The influence of freezing on the tensile strength of tendon grafts : a biomechanical study.

Johan Bellemans, Luc Labey, Johan Vanlauwe, 2013, Acta orthopaedica Belgica.

Non-invasive measurement of local intratendinous strain using dynamic ultrasound an ex vivo validation experiment in a porcine patellar tendon

Paul Suetens, Johan Bellemans, Lennart Scheys, 2011, British Journal of Sports Medicine.

Tibio-femoral kinematics in different total knee arthroplasty designs during a loaded squat: a numerical sensitivity study.

Bernardo Innocenti, Silvia Pianigiani, Luc Labey, 2012, Journal of biomechanics.

Contact forces in several TKA designs during squatting: A numerical sensitivity analysis.

Johan Bellemans, Jan Victor, Bernardo Innocenti, 2011, Journal of biomechanics.