R. Avilés

发表

Inverse position problem in highly redundant multibody systems in environments with obstacles

J. Agirrebeitia, R. Avilés, I. D. Bustos, 2003 .

Computer method for kinematic analysis of lower-pair mechanisms—I velocities and accelerations

M. A. Serna, J. G. Jalón, R. Avilés, 1981 .

Dynamic analysis of plane mechanisms with lower pairs in basic coordinates

M. A. Serna, J. G. Jalón, R. Avilés, 1982 .

Mean Stress Effect on the Axial Fatigue Strength of DIN 34CrNiMo6 Quenched and Tempered Steel

R. Avilés, Luis Pallarés-Santasmartas, J. Albizuri, 2018 .

An adaptive procedure for the finite element computation of non‐linear structural problems

Alfonso Hernández, E. Amezua, J. Albizuri, 1999 .

Second order mobility analysis of mechanisms using closure equations

R. Avilés, R. Ansola, I. Fernández de Bustos, 2012 .

A procedure based on finite elements for the solution of nonlinear problems in the kinematic analysis of mechanisms

M. Hormaza, A. Hernández, M. Ajuria, 1996 .

Kinematic analysis of linkages based in finite elements and the geometric stiffness matrix

E. Amezua, A. Hernández, O. Altuzarra, 2008 .

Second order analysis of the mobility of kinematic loops via acceleration compatibility analysis

J. Agirrebeitia, R. Avilés, I. D. Bustos, 2009 .

Nonlinear optimization of planar linkages for kinematic syntheses

E. Amezua, A. Hernández, R. Avilés, 1995 .

Second-order methods for the optimum synthesis of multibody systems

J. Agirrebeitia, R. Avilés, G. Ajuria, 2000 .

Influence of laser polishing on the high cycle fatigue strength of medium carbon AISI 1045 steel

Aitzol Lamikiz, Eneko Ukar, J. Albizuri, 2011 .

Effect of shot-peening and low-plasticity burnishing on the high-cycle fatigue strength of DIN 34CrNiMo6 alloy steel

R. Avilés, Luis Pallarés-Santasmartas, J. Albizuri, 2019, International Journal of Fatigue.

Influence of low-plasticity ball burnishing on the high-cycle fatigue strength of medium carbon AISI 1045 steel

L. N. López de Lacalle, J. Albizuri, Rafael Avilés, 2013 .

A PROCEDURE FOR THE OPTIMAL SYNTHESIS OF PLANAR MECHANISMS BASED ON NON-LINEAR POSITION PROBLEMS

A. Hernández, M. Ajuria, R. Avilés, 1997 .

A finite element approach to the inverse dynamics and vibrations of variable geometry trusses

R. Avilés, J. Aguirrebeitia, I. O. D. Zárate, 2011 .

Comparison among nonlinear optimization methods for the static equilibrium analysis of multibody systems with rigid and elastic elements

R. Avilés, G. Ajuria, V. Gómez-Garay, 2000 .

Computer method for kinematic analysis of lower-pair mechanisms—II position problems

Javier García de Jalón, Rafael Avilés, M. A. Serna, 1981 .

Lagrange multipliers and the primal-dual method in the non-linear static equilibrium of multibody systems

R. Avilés, G. Ajuria, J. Vallejo, 1998 .

A General Program for the Solution of Non-Linear Problems in Kinematic Analysis of Mechanisms

M. Ajuria, R. Avilés, J. Tárrago, 1983 .

Optimum synthesis of mechanisms with apparent stiffness restrictions

R. Avilés, I. D. Bustos, J. Aguirrebeitia, 2010 .

An Energy-Based General Method for the Optimum Synthesis of Mechanisms

Alfonso Hernández, E. Amezua, Rafael Avilés, 1994 .

Second order mobility analysis of mechanisms using closure equations

R. Avilés, R. Ansola, I. Fernández de Bustos, 2012, Meccanica.

A finite element approach to the position problems in open-loop variable geometry trusses

E. Amezua, R. Avilés, G. Ajuria, 2000 .

A modified Genetic algorithm suitable for non stationary functions

R. Avilés, I. D. Bustos, J. Aguirrebeitia, 2022 .

Methodology for the Optimization of Bolting Sequences for Wind Generator Flanges

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2014 .

Influence of laser polishing in an inert atmosphere on the high cycle fatigue strength of AISI 1045 steel

Aitzol Lamikiz, Eneko Ukar, J. Albizuri, 2014 .

Influence of the WEDM process on the fatigue behavior of Inconel® 718

José Antonio Sánchez, Rafael Avilés, J. A. Sánchez, 2016 .

A Metamodeling Technique for Variable Geometry Trusses Design via Equivalent Parametric Macroelements

Josu Aguirrebeitia, Luis M. Macareno, C. Angulo, 2009 .

A method for the study of position in highly redundant multibody systems in environments with obstacles

Igor Fernández de Bustos, Josu Agirrebeitia, Goizalde Ajuria, 2002, IEEE Trans. Robotics Autom..

Optimization of linkages for generalized rigid-body guidance synthesis based on finite element models

Josu Aguirrebeitia, Igor Fernández de Bustos, Goizalde Ajuria, 2010 .

An Acceleration Method for the Subspace Iteration

J. I. Llorente, E. Amezua, M. Ajuria, 1989 .

Optimum synthesis of planar linkages using a strain-energy error function under geometric constraints

Josu Aguirrebeitia, Igor Fernández de Bustos, Goizalde Ajuria, 2010 .

General static load-carrying capacity for the design and selection of four contact point slewing bearings: Finite element calculations and theoretical model validation

Josu Aguirrebeitia, Mikel Abasolo, Igor Fernández de Bustos, 2012 .

Eigensensitivity-Based Optimal Damper Location in Variable Geometry Trusses

Josu Aguirrebeitia, Igor Fernández de Bustos, Rafael Avilés, 2009 .

Proportional damping approximation for structures with added viscoelastic dampers

Goizalde Ajuria, J. Agirrebeitia, Rafael Avilés, 2006 .

A reduced eigenproblem formulation for Variable Geometry Trusses

Josu Aguirrebeitia, Igor Fernández de Bustos, Rafael Avilés, 2012 .

Eigensensitivity Analysis in Variable Geometry Trusses

Josu Aguirrebeitia, Igor Fernández de Bustos, Rafael Avilés, 2011 .

A Tetraparametric Metamodel for the Analysis and Design of Bolting Sequences for Wind Generator Flanges

Josu Aguirrebeitia, Igor Fernández de Bustos, Rafael Avilés, 2011 .

Kinematic analysis of mechanisms via a velocity equation based in a geometric matrix

Oscar Altuzarra, Alfonso Hernández, Victor Petuya, 2003 .

Judder vibration in disc brakes excited by thermoelastic instability

Oscar Altuzarra, E. Amezua, Rafael Avilés, 2002 .